Used Rippert Ex Geschützt for sale (6,123)

Year of construction: 2008, operating hours: 16,000 h, condition: good (used), functionality: fully functional, OKUMA SPACE TURN LB3000 EX Lathe Year: 2008 Control unit: OSP-P200L Tsdpfx Aez Aku Ijhmjc Maximum workable length*1 (capacity): 500 mm Maximum workable diameter: 400 mm Bar feeder included, Model: IEMCA MASTER 880 33 P/R Chip conveyor with belt Software for gear cutting included, along with the corresponding gear-generating tool (as shown in the attached photo).

Condition: used, Year of construction: 1987, machine/vehicle number: 10064, functionality: fully functional, operating hours: 90,041 h, input voltage: 380 V, type of input current: three-phase, pressing force: 200 t, stroke length: 300 mm, table width: 800 mm, table length: 1,290 mm, table height: 1,000 mm, ram plate width: 800 mm, ram plate length: 1,300 mm, oil tank capacity: 1,300 l, total length: 2,330 mm, total width: 1,600 mm, total height: 4,150 mm, overall weight: 21,000 kg, control cabinet height: 2,070 mm, control cabinet length: 1,500 mm, control cabinet width: 400 mm, DGUV certified until: 06/2026, die cushion stroke: 70 mm, distance between side stands: 420 mm, installation height: 600 mm, Equipment: safety light barrier, 1x tool safety input Two-hand control panel with emergency stop 8x hydraulic clamps Electrically adjustable depth stop Cut stroke damping Todpfxsyvgrhj Ahmec Ejector - draw cushion for ram and press table Electronic stroke and pressure measurement system Hydraulic main drive pump completely overhauled with a new drive motor

Condition: used, Year of construction: 2019, operating hours: 2,700 h, load capacity: 1,200 kg, lifting height: 3,150 mm, fuel type: electric, construction height: 2,500 mm, gearing type: automatic, Equipment: cabin, head guard, Welcome to Nutzfahrzeuge West GmbH! NEW!!! Chat with our sales consultant via WhatsApp: .---- MIAG EFG 12XE3i * Explosion protection (EX forklift) Zone 1 Tsdszdx Dgopfx Ahmoc * Side shifter * 4th hydraulic circuit * 80 Volt battery incl. charger * Brakes in poor condition

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, EX-Trafire 30H Hand System starter 230V Plasma system Portable and powerful Cutting performance Cutting width (mm) (structural steel) 10+ Recommended (mm) 8 Piercing (mm) 8 Cutting current (A) 10-30 Duty cycle: 100% @ 21A - 88.4V 60% @ 25A - 90V 35% @ 30A - 92V Tjdoz D Aiwopfx Ahmoc Voltage 220-240 V Air flow (lpm/bar) 48/4.5 Pressure (max) (bar/psi) 10/145 Dimensions W x L x H (mm) 165 x 480 x 290 Includes hand torch FHT-EX 30H and wear parts Starter kit

Condition: used, Year of construction: 2013, functionality: limited functionality, overall weight: 18,500 kg, We are offering this used KraussMaffei 200-750 EX injection molding machine, manufactured in 2013. Type: KM 200-750 EX International size designation: KM 750 EX/200 Year of manufacture: 2013 Machine No.: 61019432 Machine weight: 18,500 kg Tsdpfxszxk Ruo Ahmoc Please note: The machine is sold without machine conformity, as the safety door on the operator side is missing. The control panel is mounted on the rear of the machine. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2024, Ficep Excalibur 1201 EX Sectional Steel CNC Milling & Drilling Line. Serial No. 38008 (2024),18m Fixed Extension (12m Long Section), Profile Size Min/Max 50/1200mm, 9 Position ATC, Max Drilling Diameter 40mm, Spindle Power 19kW, HSK63 Spindle Taper, Max Spindle Speed 5000rpm, Sub-Spindle Stroke 200mm, X-Axis Positioning, Clamping, Drilling Unit, Light Guard Surrounds. Country of Origin: Italy Tedez Aryljpfx Ahmsc This lot has been professionally dismantled. Location: These lots are located in Wolverhampton, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 500 mm, turning diameter: 410 mm, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 510 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total height: 2,145 mm, total length: 3,272 mm, total width: 2,619 mm, quill stroke: 150 mm, overall weight: 6,800 kg, swing diameter over bed slide: 580 mm, Equipment: documentation/manual, We offer this used Okuma LB3000 EX II MY CNC lathe with ARMROID Automation. Year: 2023. Control: OSP-P300LA Excellent Clean Condition, fully operational and under power. Configuration: Single spindle CNC Turning Center with Armroid Robotic Arm. Main Spindle Seed: Up to 5,000 rpm Spindle Bore / Bar Capacity: 80mm Max Turning Diameter: 410mm Max Turning Length: 500mm Swing Over Bed: 580mm Turret: 12-station live tol turret Todezi Ihfopfx Ahmoc Spindle Motor Power: 15 kW (20 HP) - (continuous) Y Axis Travel: 120mm (+70 * -50mm) Thermal Stabilization system (TAS for spindle and structure) to mitigate thermal expansion. Tail Stock Integrated Okuma robotic arm system for lights-out operation. Chip conveyor Regularly maintained and in excellent condition - last service September 2025 Byer is responsible for removal and delivery Machine can be used with or without robot loader as required making it very versatile

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC turning machine Okuma LB 3000 EX II MYW 800 Tedpezz Ihvefx Ahmoc Control system: OSP-300L Year of manufacture: 2014 Internal machine number: 75 Distance between centers or spindle noses: 1085 mm Turning diameter over slide/bed: 340 / 580 mm Travel in X-axis: 260 mm Travel in Y-axis: 115 mm Travel in Z-axis: 1,010 mm Travel in C-axis: 360 mm Travel in W-axis: 895 mm Spindle bore: 72 mm Main spindle speed: 45 - 5,000 rpm Counter spindle speed: 45 - 6,000 rpm Tool holder: BMT Tool turret: V12 (powered) Equipment: Chip conveyor Touch probe Parts catcher Bar feeder IRCO MUK 7012 Bar length: 1250 mm Coolant system TM 24, 8 bar

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, CNC turning machine Okuma LU 3000 EX-M2SC 1000 Control system: OSP-P300LA Year of manufacture: 2022 Internal machine number: 66 Tedpfxezwl Ais Ahmsc Turning length: 1,000 mm Turning diameter: 340 mm Spindle speed: 5 - 5,000 rpm Tool shank: VDI 40 2 tool turrets A-turret: 12 tool positions / all positions powered B-turret: 8 tool positions - Tailstock - Hinged-belt chip conveyor - 3-jaw chuck Kitagawa B-212 Z220, bore in the chuck Ø 91 mm - Touch setter - One Touch IGF - Handwheel on the control panel - Tool monitoring system - Reinforced coolant pump, 8 bar

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Exero Mounted Screening Unit: Tedpoxghbajfx Ahmsc Width: 1830 mm Weight: 500 kg equipped with hydraulic fan: Type EX 8 (Year of manufacture 2019) Width: 140 mm Weight: 22 kg

Condition: used, Manuelle Nut- und Perforationsmaschine / manuall Creasing and Perforation machine Nut- und Perforationsmaschine / Creasing and Perforation machine Foellmer EX Serial-No. 156 Arbeitsbreite / Working width max. 450mm Inklusive Nut- und Perforationswerkzeug / Include Creasing and Perforation tools Handbetrieb - Manuell Operation Tsdpfx Ahjz H A Nijmec Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2023, For Sale: Mazak OPTIPLEX 4020 FIBER III Fiber Laser Cutting Machine Offered for sale is a Mazak OPTIPLEX 4020 FIBER III, manufactured in 2023 and built by the renowned Japanese machine tool manufacturer Yamazaki Mazak Corporation. This modern fiber laser cutting system combines high productivity, precision, and reliability, making it suitable for a wide range of sheet metal processing applications. Technical Data - Manufacturer: Yamazaki Mazak Corporation - Model: OPTIPLEX 4020 FIBER III - Machine Type: Fiber Laser Cutting Machine - Year: 2023 - Machine Weight: Approx. 5,300 kg - Origin: Japan - Cutting hours : 2592h - Operating hours : 5110h Technical Specifications - Working Area: 4,000 x 2,000 mm Tjdpfx Aoz Ia Ulshmec - Laser Technology: Fiber Laser - CNC Control: Mazatrol Preview G / Smart Factory compatible - Automatic Focus Cutting Head - High-Speed Linear Drives - Intelligent Nozzle Change System - Automatic Cutting Condition Optimization - Energy-Efficient Fiber Laser Source - Advanced Collision Protection - Integrated Process Monitoring Availability: Immediately Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! * Manufacturer: Yamazaki Mazak Corporation * Model: OPTIPLEX 4020 FIBER III * Machine Type: Fiber Laser Cutting Machine * Year: 2023 * Machine Weight: Approx. 5,300 kg * Working Area: 4,000 x 2,000 mm * Laser Technology: Fiber Laser AVAILABILITY: IMMEDIATELY * Cutting hours: 2592h

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC lathe Okuma LB 3000 EX MC 500 Control: OSP-P200L Year of manufacture: 2008 Internal machine number: 69 Turning length: 500 mm Turning diameter: 340 mm Swinging diameter over bed: 530 mm Spindle speed: 4,200 rpm Tool holder: BMT 60 Tool turret, 12 stations (powered) C-axis: 0.001 degrees Equipment: - One-touch IGF Tjdpfx Ahezwlw Tjmjc - Chip conveyor - Touch setter - 3-jaw chuck Kitagawa B-210 - NC tailstock

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL031303405S, For sale is a single unit consisting of a textile carousel with a matching conveyor dryer: M&R Sportsman EX 8/6 textile carousel, built in 2013 Total print count: 1,168,378 Diameter: 386 cm Weight: 1,497 kg Power supply: 380 V Pallets: Textile - 40 x 55 cm, 8 pieces Pockets - 30 x 40 cm, 8 pieces Tsdpfx Asv Iy H Ijhmoc Sleeves - 15/12 x 40 cm, 8 pieces Squeegees: 6 x flood and 6 x pressure squeegees Screen fit with TRI-LOC M&R Radicure D 36/6-3 conveyor dryer, built in 2012 Conveyor width: 91 cm Drying channel length: 183 cm Total width: 127 cm Total length: 305cm Weight: 817kg Power supply: 380V Price negotiable

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, Available starting September/October. Operating hours: Laser: 35,000 hours. Tjdpfxszn N Hgj Ahmoc

Condition: excellent (used), functionality: fully functional, number of ink cartridges: 5, color channels: 4, resolution (max.): 2,400 dpi, number of feeding trays: 6, counter reading (black): 121,531, counter reading (color): 236,585, input voltage: 220 V, Equipment: auto duplex, Xerox PrimeLink C9070, including OCT, 1OHCF, and an external Fiery Controller running Windows 10 on an SSD. Total color page count: 236,585 Total black and white page count: 121,531 Todpfxszqbb Us Ahmjc Total page count: 358,116 ⚡ High productivity with 70 color pages per minute. 🎨 Very consistent color quality thanks to the EX Fiery Controller. 📚 Suitable for brochures, flyers, business cards, posters, book covers, and direct mail. 📄 Supports heavy paper stocks up to 350 g/m². 📏 Long sheets up to 660 mm for banners and triptychs. 🔄 Large paper capacity reduces downtime during production. 🖨️ Professional workflow integration for graphic production environments. Are you looking for other options for this machine? We are flexible and can configure the machine to your specifications! This machine has been inspected and thoroughly tested by our own specialized technical service department. If you require further information, please do not hesitate to contact us. Worldwide shipping is possible.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 132542, turning diameter over cross slide: 470 mm, turning length: 300 mm, turning diameter: 580 mm, spindle bore: 62 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 380 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,839 mm, total length: 1,865 mm, total width: 1,734 mm, overall weight: 3,200 kg, Equipment: documentation/manual, OKUMA LB2000EX-MC x 300mm OSP P200L CNC-Controller Number of axis - 3 Swing over bed - 580mm Swing over cross slide - 470mm Max dia. turning - 360 mm Max turning length - 300 mm X axis travel - 260 mm Z axis stroke - 390 mm Rapid X-axis 25,000 mm/min Z axis rapid 30,000 mm/min Spindle nose - Flat Main spindle speed - 6000 rpm Main spindle power - 11 kW Main spindle diameter - 100 mm Kitagawa 6 inch chuck Driven tools - 6000rpm Driven tools - 5,5kW Turret type VDI 12 Stations Square tool section - 20mm Boring bar section - 32mm Tailstock Quill diameter - 70mm NC tailstock stroke - 415mm Konus - MK 4 Chip conveyor type high Wight - 3200kg Todpfxoxrnr Ns Ahmec One Touch dialog with colour High presure coolent

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap 18 interface on FWAP - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits - 8 heating zones for hot runner - Extrusion injection circuit with position control Tedpfx Aoyrd U Uohmec - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould installation height: 250 mm Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 13764x, Equipment: documentation/manual, CNC lathe in very good condition, available for demonstration in production, complete with extensive accessories. Last inspection: 2026 Release date: available on short notice. Tedpfxezx Aqge Ahmoc

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Year of manufacture: 2013 Internal machine no. 24 Swing diameter over bed: 400 mm Centre distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Tsdpfxoyvfhds Ahmoc Equipment: - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine - Touch setter - Renishaw probe - Extraction unit - Various accessories

Condition: good (used), functionality: fully functional, For Sale: Takisawa EX-110 CNC Lathe + LNS Bar Feeder, Year 2004 A Japanese-made Takisawa EX-110 CNC lathe in good condition, equipped with an LNS bar feeder. Specifications: - Control: Fanuc 21i-TB - Max turning diameter: 400 mm - Max swing over bed: 495 mm - Max turning length: 710 mm - Bar capacity: 75 mm - Spindle speed: 30–3,500 rpm - Spindle power: 18.5 kW - Turret positions: 12 - Chuck size: 250 mm (A2-8") - Rapid traverse X/Z: 16/20 m/min - Weight: approx. 5,000 kg Tjdpfx Asyrgggohmsc Included equipment: LNS bar feeder, tailstock, chip conveyor, tool setter, coolant system. Further information and pricing upon request. 📞

Year of construction: 2008, condition: used, X-axis: 330mm, Z-axis: 1650mm, max. swing over bed: 910mm, swing over cross slide: 560mm, distance between centers: 1820mm, standard turning diameter: 450mm, max. turning diameter: 610mm, max. turning length: 1650mm, bar capacity: 184mm, spindle speed: 12-1200rpm, spindle nose: A2-15, spindle bore: 200mm, spindle bearing diameter: 266mm, turret type: T10, square tool height: 32mm, boring bar holder diameter: 65mm, tailstock travel: 1400mm, quill stroke: 200mm, tailstock taper: MT5, tailstock quill diameter: 160mm, rapid traverse X-axis: 20m/min, rapid traverse Z-axis: 24m/min, jog feed X-axis: 0-1260mm/min, jog feed Z-axis: 0-1260mm/min, spindle motor power: 30/37kW, X-axis servo motor: 4kW, Z-axis servo motor: 7kW, hydraulic pump: 2.2kW, lubrication pump: 0.004kW, coolant pump: 1.1kW, connected load: 52kW, coolant tank capacity: 300l, hydraulic tank capacity: 83l, lubricating oil tank capacity: 4l, length: 4740mm, width: 2130mm, height: 2090mm, weight: 11t, with documentation. The machine was commissioned in 2008 and operated in single-shift production only, it is currently no longer in operation and has been idle for approx. 2-3 years. An on-site inspection is possible. Tedpjzz Irusfx Ahmoc

Condition: excellent (used), Year of construction: 2008, operating hours: 49,673 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 156 cm³, plate length: 740 mm, plate height: 640 mm, total length: 5,350 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 6,500 kg, Equipment: documentation/manual, KRAUSS MAFFEI KM 80-380 EX Stock No.: 503232 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 EX Control: MC5 Year of manufacture: 2008 Operating hours: 49673 h Technical data, clamping unit side Clamping force: 800 kN Tie bar spacing, horizontal x vertical: 520 x 420 mm Platen size, horizontal x vertical: 640 x 740 mm Minimum mold thickness: 300 mm Maximum mold thickness: 790 mm Ejector stroke: 100 mm Ejector force: 22 kN Centering of moving platen, diameter: 125 mm Centering of fixed platen, diameter: 125 mm Technical data, injection side Screw diameter: 35 mm Injection volume: 156 cc Injection pressure: 2429 bar Screw length: 23 l/d Screw speed: 477 rpm Free injection flow rate: 289 g/s Number of heating zones: 5 Dimensions & Weight Machine dimensions, length x width x height: 5.35 m x 1.7 m x 2 m Total weight: 6500 kg Equipment Screen text in German CEE socket 16A Air valve 1x Machine with material hopper Machine with water manifold Tsdpfjz Az Rdex Ahmoc Leveling elements EUROMAP 67 Handling interface USB interface Schuko socket 10A Tool heating 24x

Condition: used, Automatic filling line for EX-type products, i.e., products filled in a potentially explosive hazard zone 2. These devices are used for products of the following types: - detergents, - cleaning agents, - solvents, - windshield washer fluids, - various types of liquid chemical raw materials, - plasticizers and other process liquids, - fuels and oils, - other liquid petrochemical products – provided that the materials are compatible and the EX design is appropriate. The filling system consists of several components: - ROBAK volumetric filler, type: ANO-750, with Endress+Hauser DOSIMASS flowmeter fillers, EEx standard – this is a Coriolis flowmeter that can directly measure mass flow, as well as density and temperature, and based on this, volumetric flow. - ROBAK single-head capping machine, type: ZR-02, EX standard, currently in a format for 1 L bottles with a safety cap for hazardous products. - ROBAK cap feeder, type: MPZ-03 - Control cabinet Tedpfszu Rqtjx Ahmoc Option for filling bottles or canisters. System capacity: 500 - 2,000 bottles per hour. Complete documentation for the machines. Option to order conveyor belts in EX standard. Used machines, regularly serviced.

Condition: used, Year of construction: 2012, functionality: fully functional, 1 OKUMA CNC Lathe Model LT2000EX-2M1Y with OSPP200LA CNC Controller Including CE mark 1 set 〈European Standard Specification〉 1-1 Spindle motor VAC 11/7.5 kw (5 min./cont. ) 2 set 1-2 Spindle speed 50 - 6,000 min-1 2 set 1-3 Spindle dia. 62/100 mm, 140 Flat nose 2 set 1-4 C-axis control, 360 degree at 0.001 degree increment 2 set 1-5 Y-axis 95mm (+50 to -45) for upper turret 1 set 1-6 Upper V16 (turning & milling) + Lower V16 (turning & milling) Radial turret (No tool holder included) 1 set 1-7 Rotary tool drive motor, PREX 5.5/3.7kw (2 min/count) 2 set 1-8 Rotary spindle speed 45-6,000 min-1 2 set 1-9 Coolant supply system, 0.8kw x 3 sets pump motor 1 set 1-10 Work light, fluorescent lamp 1 set 1-11 Totally enclosed guard 1 set 1-12 Door interlock 1 set 1-13 Chip pan, side chip disposal type 1 set 1-14 Foundation washers and leveling jack screws 1 set 1-15 Machine lifting hooks 1 set 1-16 Chuck auto open / close with confirmation 2 set 1-17 Chuck air blower 2 set 1-18 Lubrication monitor B-1 1 set 1-19 CE mark and EMC 1 set 1-20 Application for IEC standard 1 set 1-21 Double chuck operation pedal 2 set 1-22 Synchronized tapping (for LT2000EX-M) for Milling rotary tool 1 set 1-23 OSP-P200LA CNC Controller with 15" colour display, touch panel 1 set 1-24 OSP-P200LA 3D-M-E kit specifications 1 set *Multitasking machines Coordinate conversion (1 set) *Multitasking machines Profile generation (1 set) *Program storage Standard: 2GB (1 set) *Operation buffer Standard: 2MB (1 set) *Real 3D simulation (1 set) *Cycle time over check (1 set) *Load monitor (spindle, feed axis) (1 set) *NC operation monitor (incl. counter and monitoring function) (1 set) *Cycle time reduction function (1 set) Tjdpfxey Rnbdj Ahmjc *Variable spindle speed control (1 set) 1-25 Pitch error compensation X + Ys + Z 1 set 1-26 Inch / metric switchable function 1 set 1-27 Workpiece jump out detection 1 set 1-28 Status indicator lamp (2-layer lamp) instead of status indicator in 3D-E kit 1 set 1-29 Electrical power source application to suite local power source at each countries (CE transformer) 1 set 1-30 Chuck open/close during spindle rotation (LT-Standard) 1 set 1-set of tools - see last photo