Used Roche Lightcycler Ii for sale (1,958)

Condition: used, Technical details: Nedpfeu Nk E Ijx Akuect diameter: 200 mm Torque: 2200 U/min weight of the machine approx.: ca.17 kg 3 jaws lathe chuck according Norm TGL 30-2332 *

Condition: used, Technical details: diameter: 250 mm passage: Ø 80 mm width: 106 ohne Flansch mm weight of the machine approx.: auf Anfrage kg dimensions: Ø 250 x B: 140 mm Ncjdeu Nlatepfx Akuot three jaw chuck made of steel incl. chuck key inkl. 2x 3-Backen flange size : Ø 250 x 26mm, fastening with 4 pieces clamping bolts inside divided circle Ø 170mm on Sale with or without flange! i.D. *

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Ncjdpfx Akou Nfinsust Accessories: - Steel plate 1170x860x80mm *

Condition: used, Year of construction: 1984, Milling Head vertical accessory for a milling machine Fritz Heckert FSS 400 - weight 255 kg - dimensions: LxWxH: 560 x 500 x 400mm - swiveable 90° right / left Nsdsu N E Abopfx Akuoct - clamping area 500 x 400mm *

Condition: used, Technical details: Pressure: 160 t slide stroke: 32...140 mm no. of strokes: 50 Hub/min throat: 400 mm dayligth: 400 mm adjustment of ram slide: 100 mm table-size: 1000x750 o. Aufspannplatten) mm Nedpfxou N Dfhs Akujct ram surface area: 850x630 mm tool shank hole: 400x360 mm total power requirement: 15,5 kW weight of the machine ca.: ca. 10,5 t dimension L-W-H: E-Schrank 1,06x0,6x2,0 mm dimensions L x W x H: L:2,9 x B:1,25 x H:3,3 m - single and /or continuous stroke possible - 80A; Air pressure 6kp/cm²; Oil filling approx.30 Liter - 2 clamping plates (1200x760x90mm and 1200x760x70mm faucet hole dia=300mm) - foot control or manual via hand possible - last check record was 2006 can be demonstrated under power! i.D. *

Condition: used, Technical details: travel -y axis: Schlitten auf Balken: 200 mm spindle taper ISO: SK 40 spindle head swivable left - right: je 90° ° quill stroke: 80 mm turning speed range: 90 - 900 / 5 step U/min distance table - lower edge spindle: min./max.: 50 / 400 mm table surface area: Anbaufläche:760 x 200 mm table surface area: Spannfläche: 630 x 200 mm max. table load: 100 kg x-travel: Tisch längs: 320 mm z-travel: Tisch vertical 350 mm table swivelabel +/-: re/li je 30° distance table - lower edge spindle: min./max.: 50 / 400 mm feed:: Tisch: stufenlos 14 - 71 mm/min total power requirement: 4,0 kW weight approx.: 1.200 kg dimension machine xH: 1,3 x 1,5 x 1,8 m Equipped with Heidenhain DRO for X and Y travel Swiveling work spindle The feed works via variator gear. The table is swivelable. Njdpfx Asu Ndb Aokuect Spindle speeds operate in 3 levels via gears and in 2 levels electrically. Cooling device diverse tool holders SK40 Der Fräsbalken ist um ca. 350mm ausfahrbar. The machine vise is not included in the delivery scope (see picture), but can be purchased additional! *

Condition: used, VERTICAL MILLING HEAD Accessory for a Fritz Heckert FSS 400 milling machine Weight: 285 kg Dimensions (LxWxH): 550 x 500 x 550 mm Swivels 90° to the right / left Clamping surface: 500 x 400 mm Taper: SK 45 Flange diameter: D = 260 mm Mounting: 4 holes, diameter D = 17.5 mm Nodpev U I Sljfx Akuect *

Condition: used, Technical details: pressure: 160 t throat: 760 mm slide stroke: 32...140 mm distance between table / ram: 400 mm ram adjustment: 100 mm no. of strokes: 50 Hub/min table:: 760x1000x95 passage opening in table: 400x350 mm clamping surface ram: 630x850 mm clamping plate: 760x1010x92 mm total power requirement: 15 kW weight of the machine ca.: 6,2 t dimension machine xH: 2,9x1,2x3,4 m dimensions electric cabinet LxWxH: 0,8x0,45x2,1 m - via two hand control - copy of documents digital available Nsdpfxju Nfhqe Akuect Machine can be demonstrated under power. *

Condition: used, Year of construction: 2002, Technical details: thickness: 0,6 mm width: 1200 mm Length: 100 mm Ncsdpsu Nxa Hofx Akuot work speed: 1,5 - 3 m/min motor power: 45 kw compressed air: 7 bar Total weight, approx.: 4500 kg dimension machine xH: gesamt: 20 m / 2,6 m / 3 m m 2 pcs Sandwich Panel Production Plant The plant is especially suitable for producing light laminated panels. The plant consists of a feeding system (conveyor belt) for the material, cutting system, profile system and an electronically control system. The plant has a length of 20m, width of 2,6m, height of 3m. The total weight of the plant is approximately 4,5 tons. The power consumption including the thermal output is 36 KW. The recommended material of the internal layers are flame retardant Polystyrol or other light heat insulation materials. The sheet will be stable connected under pressure and heat with the Polystyrol through double sided application from portions of glue on the Polystyrol. The panels have good physical characteristics such as thermal insulation, sound insulation, wet consistency, bending strength, compressive strength and mechanical attributes. Any length of the laminated panels is possible and adjustable on customer demand. The color of the panel is variable and is depending from the color of the used sheets. Data Sheet Power Consumption of the plant (with heating system): 36KW Measurements: - Length = 20m - Width = 2,6m - Height = 3 m - Operating Temperatures: The optimal temperature for producing the panels is approximately 25 °C. - Material: galvanized metal sheet on rolls, sheet thickness 0,3 – 0,6mm and a width of 1200mm - Power Supply: 380 V 50Hz - Maximum engine power: 45 KW - Compressed Air: 7 bar Measurements of the laminated panels: Model 1 - Width 800 – 1200 mm - Thickness 20 - 30mm Model 2 - Width 1150 mm - Thickness 50 – 150mm( adjustable) production plant consists of: - unwinding device - feed system - lamination - cutting device - glueing - fume extractor device - stacking device - electronic control system (Mitsubishi) *

Condition: used, mileage: 158,894 km, power: 235 kW (319.51 HP), first registration: 06/2015, fuel type: diesel, empty load weight: 16,960 kg, maximum load weight: 9,040 kg, overall weight: 26,000 kg, tire size: 315/80 22,5, tire condition: 30 %, axle configuration: 6x2, wheelbase: 4,300 mm, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2015, operating hours: 158,894 h, front tire size: 315/80 22,5, rear tire size: 315/80 22,5, Equipment: ABS, air conditioning, cruise control, differential lock, truck registration, Reference number for inquiries: 69738 Mercedes-Benz 2532 * Year of manufacture: 2015 * ABS (Anti-lock Braking System) Nedpfx Akowwqm Nousct * EBS (Electronic Braking System) * Electric window lifters * Air conditioning * Air suspension * Lift axle * Cruise control * PTO (Power Take-Off) * Differential lock * Low noise emission * Local/urban distribution > 7.5 t * Trailing steering axle * Electric windows and mirrors * Remote central locking * Lane departure warning system * Transmission: Automatic * Suspension: Leaf/Air * Gross weight: 26,000 kg * Unladen weight: 16,960 kg * Payload: 9,040 kg * Permissible total weight: 26,000 kg * Tire condition, 1st axle: 30% -- 60% - Tire size: 315/80 R22.5 * Tire condition, 2nd axle: 30%|30% -- 30%|30% - Tire size: 315/80 R22.5 * Tire condition, 3rd axle: 30% -- 30% - Tire size: 315/80 R22.5 * Wheelbase: 4,300 mm * Tire sizes: 315/80 R22.5 * Superstructure: Faun Powerpress II 524 * Zöller Delta 2301 bin lift * 3 seats * Central lubrication system * On request, we are happy to send you a video or additional photos Disclaimer: Subject to change, prior sale, and errors excepted. More images and videos can be found on our website. Our comprehensive services include for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Handling of all (export) documentation * Order of export / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV-inspection, registration service * Transfer/delivery of commercial vehicles Contact our experienced staff – we will be pleased to advise you.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 762 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, table load: 600 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 3, This 3-axis DOOSAN DNM 400 II was manufactured in 2014. It features an X-axis travel of 762 mm, Y-axis travel of 435 mm, and Z-axis travel of 510 mm. The machine includes a worktable with dimensions of 920 mm x 435 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 400 II vertical machining centre we have for sale. Contact us for further details. Ncedpoy T I Snjfx Akuot • Capacity and travels: • Spindle nose to table: 150–660 mm • Worktable: • Size: 920 x 435 mm (36.2" x 17.1") • Spindle: • Max torque: 117 N·m (86.3 ft-lbs) • Taper: BIG-PLUS Dual Contact #40 (BT40 / CAT40) • Cooling: Through-spindle coolant (included) • Automatic Tool Changer (ATC): • Capacity: 30 tools (cam-type double arm) • Tool-to-tool time: 1.3 s • Max tool length: 300 mm • Feed rates and motion: • Rapid traverse (X/Y): 36 m/min (1,417 IPM) • Rapid traverse (Z): 30 m/min (1,181 IPM) • Max cutting feedrate: 10,000 mm/min Additional equipment • Workpiece clamps, tools, and toolholders available at additional cost (not included) Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,220 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 1,300 mm, table length: 550 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II INFO was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II INFO vertical machining centre we have for sale. Contact us for further details. Ncedpfjy T Hbzjx Akujt - Total Operating Time: 17,659 hours 12 minutes 03 seconds (Recorded on 2026/02/19)- Automatic Cutting Time: 6,129 hours 38 minutes 37 seconds- Automatic Machining Time: 5,877 hours 48 minutes 01 seconds- Operating Time / Power On Time: 26,902 hours 54 minutes 33 seconds- Feed Rate Override Display: 50%- Feed Speed Display: 150 mm/min- Electrical Drives/Servo System: Mitsubishi Electric MDS series (400V system)- Additional System Interfaces: Renishaw Machine Interface MI12 (integrated inside electrical cabinet for probe system)- Safety Module: Mazak Safety Relay Module (QS-VMI100R-10)- Installed Options (Software/NC Options Enabled):* EIA / EIA 3D Comp. / EIA Herical Tap Cycle / EIA Pattern Cycle* High Smoothing Control* Spiral* Rotation* Geometric* Scaling* Ext-Data I/O* Inverse Time* Auto TLM* Polar Coordinates Input* Comparison Stop* G54.1* Sync. Mill Tapping / Sync. Main Sp. Tapping* Inch/MM Convert* G00 Slope Const.* Scale Feed Back* Variable 600 Sets* IC Card Running* Tilted Working Plane* Re-Thread* Pitch Error Comp.* Tap Retraction- Coolant/Hydraulic Accessories: External tank base with dual motor-pump units and filtration assembly (including a manual visual indicator pressure/bypass filter)- Extraction/Exhaust Accessories: Fitted with a flexible corrugated overhead extraction duct (mist/smoke extractor hose connection)

Condition: used, Year of construction: 2013, x-travel 600 mm y-travel 530 mm z-travel 510 mm Control M 730 BM MAPPS IV max. spindle speed 10.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 transmission ratio 1 spindle diameter in front bearing 80 mm table surface area 900 x 600 mm max. table load 800 kg T-slots 6x 18 x 100 mm distance spindle /table 150 - 660 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 150 mm max. tool length 300 mm max. tool weight 8,0 kg change-time tool to tool ca. 1,3 sec change-time chip to chip ca. 3,45 sec Njdpfx Aox R Enbokuect rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 30.000 mm/min Tipp feed 0 - 5.000 : 20 mm/min total power requirement 30 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - Machining Center Vertical MORI SEIKI - NVX 5060 II / 40

Condition: used, mileage: 271,934 km, power: 240 kW (326.31 HP), first registration: 11/2012, fuel type: diesel, empty load weight: 14,550 kg, maximum load weight: 11,450 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,950 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 4, total length: 9,450 mm, Equipment: ABS, air conditioning, cruise control, differential lock, immobilizer system, soot filter, traction control, Faun Type VarioPress II 524, tipper body by Zöller, serial number 2301/70061, manufactured in 2010. Features a trailing steered axle. This is a non-binding offer; subject to changes and prior sale. Sale is made excluding any warranty. All information is provided without guarantee! Nsdjvidivepfx Akusct

Condition: good (used), Year of construction: 1990, machine/vehicle number: 8390, Offer 26135 Technical data: - Pressing force, continuously adjustable 25 t - Stroke, continuously adjustable 300 mm - Torque at the rotary shafts 6900 Nm - Speeds at the lower rotary shafts 4 + 8 rpm - Speeds at the upper shaft, continuously adjustable 2 - 12 rpm - Digital + analog display of actual values - Drive 400 V / 6 kW - Space requirement approx. W 1480 x H 1100 x D 800 mm - Weight approx. 1300 kg - Bending capacity when tools are available - Edges with W 125 120 x 16 mm Ncodpfxjy Tyads Akuot - Straightening without straightening bar 100 m³ - Pipe (pressing process) 2 " - Ring bending (flat material, upright) 80 x 10 mm - Ring bending (round tube) 60 x 4 mm - Mandrel bending 60 x 2.6 mm - Round bending (flat) 70 x 12 mm - Bending tools: - Bending tools, pointed tools + prisms - Various other pipe bending tools, incomplete

Condition: good (used), functionality: fully functional, Parker Parkrimp II 83 CE crimping machine for high-pressure hoses (hydraulic hoses) Crimping force: 125t (at max. 5,000 PSI) Suitable for the following fitting series: 43, 71, 77, 25, 26, 81, HY series (611HT, 801, 836) The following crimping dies are included: 5/16" Purple 80C B05 & A05 3/8" Yellow 80C A06 5/8" Orange 80C B10 & A10 1/4" Red 80C B04 & A04 3/4" Green 80C A12 & B12 & C12 & 12 (78) 1/2" Blue 80C A08 & B08 1" Black 80C A16 & B16 & C16 & 16 (78) 1 1/4" White 80C A20 (2 pcs) & C20 2" Red C24 Nodpfsv Rnnlox Akusct Weight: 450 kg #8247

Condition: used, KISTLER Control Monitor CoMo II-S 5859A1 Condition: Used functional Nodpsy S Dtxefx Akujct

Condition: excellent (used), functionality: fully functional, Despite its age, the machine is in like-new condition!!! For sale is a high-performance sinker EDM machine, model 600 ERCOCOM II, from Dieter Hansen, with a Heidenhain control system. Ncodpfeykq U Eex Akuet The machine is equipped with high-quality components and is particularly suitable for precise applications in tool and mold making. Features & Highlights: • Adaptimat with gap process monitoring – specifically for graphite machining to avoid arcing (new price alone approx. €13,000) • 16-position electrode changer for automated series machining • Erowa clamping system for precise and fast setup • 3D probe with carbide ball for exact measurement • Cooling system (7 kW) • Integrated extraction system for fumes Some barrels with dielectric fluid are included! An inspection and functional test are possible by appointment. If you are interested, we look forward to hearing from you.

Condition: used, machine/vehicle number: 008269, Position 1: Panel Feeding and Loading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 2: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Njdpex A Hggofx Akuoct Position 3: Double Sided Squaring/Edgebanding Machines IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 4: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 5: Panel Stacking and Offloading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3

Condition: good (used), Year of construction: 1985, functionality: fully functional, grinding length: 600 mm, grinding diameter: 250 mm, External cylindrical grinding machine WAGNER/YAM GU2760 Year of manufacture: 1985 Control: mechanical/hydraulic The machine is fully functional and can be inspected while powered on. Ncjdpsy Tcnkefx Akust Further details will follow.

Condition: good (used), Year of construction: 2001, Lifting capacity: 220 kg Ncodpfxsy Tiwlo Akust Width: 560 mm Height: 1400 mm Depth: 450 mm Net weight: 45 kg

Condition: used, Year of construction: 1990, x-travel 2800 mm y-travel 1000 mm z-travel 1200 mm table surface area 2000 x 800 mm rotary table dia. 800 mm spindle taper SK 50 spindle turning speed - stepless 50 - 2000 U/min max. torque on the spindle 3000 Nm spindle drive 30 kW feeds longditudinal/cross/vertical 2 - 2000 mm/min rapid motion -longitudinal/cross/vertical 7 m/min control SIEMENS control SINUMERIK 850 M no. of tools in magazin 56 workpiece diameter at full load 114 mm wotkpiece diameter with 2 vacant positions 200 mm workpiece length 400 mm weight of tools max. 16 kg tool changing time ca. 8 - 9 sec internal coolant system feed ja / yes weight of the machine ca. 25,4 t = 5-axis CNC-bed-type milling machine with integrated NC-rotary table and NC-swivelling milling head - Acc.: tool pre-setting device, various tool fixtures, chip conveyor, coolant with high pressure pump and filtration device, electron. Nsdpfx Asyt Rwljkujct handwheel, fixators

Condition: used, Drive motor 37 kW (can be increased to 75 kW) Njdpfey Th Euex Akusct Rotor diameter: 500 mm Rotor width: 600 mm Inlet opening: 500 x 600 mm 5 knives, diagonal cut Hinged housing, with 2 stator knives.

Condition: repair required (used), Year of construction: 2019, functionality: limited functionality, machine/vehicle number: 222971-1906-0457, travel distance X-axis: 300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, overall weight: 90 kg, pressure: 6 bar, input voltage: 230 V, The Geiger (device with intermittent operation) MiniServo II 1.5 is a servo-motor-driven extraction device or sprue picker, specifically designed for use on injection molding machines. The device is used to precisely and quickly remove sprues or small molded parts from the mold and place them aside. Njdpfxsy Tn Rdo Akuect Swivel axis (A): 0-105° Extraction stroke (X): 300 mm with linear guide and rack and pinion Vertical/lateral stroke (Y/Z): 800 mm linear guide and rack and pinion (part and gripper weight up to max. 1.5 kg) Servo-motor drive for the main axes Fail-safe mechanism (Y): electromechanical Sliding console Gripper F Rotary module B (pneumatic) with stop 1 compressed air circuit for gripper 1 compressed air circuit for rotary module B 1 vacuum circuit with monitoring Programming assistant for programming standard extraction sequences with 1 compressed air circuit and 1 vacuum circuit Interface connection Euromap 67 (standard) Interface and power cable 5 m Placement area behind and in front of the machine RAL 9016 white Additional HT7 control, vacuum circuit, and consoles Sale only to commercial customers; warranty excluded.

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 18,5 [kW] - Spindle speeds : 59 - 4500 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 250 [mm] - Max. chuck diameter : 215 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 59 - 4500 [rpm] - Max. bar diameter : 51 [mm] - Max. turning diameter : 165 [mm] - C axis indexing precision : 0,001 [°] - Travel : 575 [mm] - Spindle / counter-spindle distance : 250 - 870 [mm] TURRET 1 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 195/600 [mm] - Live tools speed : 80 - 3600 [rpm] - Live tools power : 5.5 [kW] TURRET 2 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 195/600 [mm] - Live tools speed : 80 - 3600 [rpm] - Live tools power : 5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 63 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3475 x 1933 [mm] - Machine height : 2225 [mm] Ncedpfxouhafxe Akuet - Machine weight : 7800 [kg] MACHINE HOURS - Number of hours under power : 58774 [h] - Number of spindle hours : 19265 [h] EQUIPMENT - CNC : 18i-TB - 3 colors status lamp - Coolant tank * with high-pressure pump : 25 [bars] - Chips conveyor - Parts catcher - Parts conveying strip - Number of turning tool holders : 11 - Number of fixed tool holders : 11 - Collet chuck