Used Schmedt Pracut 6501 Notching Machine for sale (65,310)

Condition: good (used), functionality: fully functional, Station 1: Angle adjustment from 30° - 120° Cutting length 150 mm Station 2: Notching 100 x 20 mm Dodpfx Ajzhgp Ejkhowa

Year of construction: 1990, condition: ready for operation (used), A hydraulic Euromac notching machine is available. Notching capacity steel/stainless steel: 6mm/5mm, blade length: 220mm, working angle: 90°, angle adjustment: 30°-140°, stroke rate: approx. 50/min. Machine dimensions X/Y/Z: approx. 1100mm/950mm/1300mm, weight: approx. 800kg. An on-site inspection is possible. Dwsdpfx Akozd Ei Ajhja

Condition: used, functionality: fully functional, Year of construction: 1993, machine/vehicle number: 398, control type: manual, degree of automation: manual, actuation type: hydraulic, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, input frequency: 50 Hz, type of input current: three-phase, overall weight: 900 kg, cutting length (max.): 150 mm, Equipment: angle stop, foot remote control, Cutting performance (90° notch) - Normal steel: 4.0 mm - Stainless steel: 3.0 mm Cutting angle: 30-120° Dodpfx Aevk I Avjkhewa Cutting length: 150 x 150 mm Working height: 900 mm Table: 1000 x 650 mm Motor power: 3.0 kW Weight approx. 900 kg Dimensions: 1250 x 1000 x 1160 mm (LxWxH) Equipment: - Angle adjustment 30° - 120 ° continuously - 2 digital displays for the adjustable stops * Set-up stroke * Single stroke * Continuous stroke - Plexiglass protection for better transparency - Hardened blades also for cutting stainless steel - Adjustable stroke height setting - Removable cutting container - Freely movable foot switch BOSCHERT angle adjustment: - the one-piece 30° The upper blade is directly connected to both a left and a right lower blade within a tool - for each notch over 30°, the notch is made once to the left and once to the right. - the swivel adjustment is carried out pneumatically immediately after the first notch has been completed. The machine can be demonstrated on site with power on. All information is provided without guarantee. Subject to errors and prior sale.

Condition: used, Year of construction: 1987, plate thickness 3 mm angle adjustable from - to 30 - 120 Grad table height 900 mm weight ca. 800 kg Cutting capacity: 3 mm St40 at 150 x 150 mm, 2 mm stainless steel; cutting angle continuously adjustable from 30° to 120°; pneumatic clamping for angle adjustment (Boschert system); machine is in good condition Dsdey Ihanepfx Akhewa

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, cutting force: 12.5 t, sheet thickness steel (max.): 6 mm, overall weight: 2,000 kg, Equipment: CE marking, emergency stop, finger protection, foot remote control, Hydraulic notching machine Manufacturer: Boschert, Type: K30 – 120, Punching press: Trumpf Year of manufacture: 2001 Technical data Width x Depth x Height: 1.5 x 1.6 x 1.4 m Weight: 2,000 kg Table dimensions: 1600 x 1000 mm Station 1: Notching Angle range: 30 - 120 degrees (infinitely adjustable) Cutting length: 200 mm Cutting capacity: 6 mm in ST 40 steel 4 mm in stainless steel Station 2: Punching (Trumpf tool system) Punching force: 12.5 t Punching diameter: 105 mm max. Overhang: 300 mm All information is subject to change without notice. The machine is in very good condition. A demonstration under power is possible at any time in our showroom. Dsdpozcm Ncofx Akhewa

Condition: good (used), Year of construction: 1980, machine/vehicle number: PN 0312, Offer 26138 Technical data: - 90° cutting head, pneumatically operated - Cutting thickness: - Normal steel: up to 2 mm Dwsdpjy U Hv Uefx Akhea - Stainless steel: up to 1.5 mm - Aluminum: up to 3 mm - Blade length: 130 mm - Table size: W 600 x D 380 mm - Working height: 940 mm - Foot pedal - Compressed air requirement: 6 - 8 bar - Space requirement: approx. W 600 x H 1250 x D 850 mm - Weight: approx. 180 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0164390271794, Offer 26137 Hydraulic combination flat bar shear with notching device and punch press Technical data: Dwodpfx Akjy Uwu Uehoa - Flat bar shear - Blade length 360 mm - For flat material 350 x 13 mm - or 230 x 20 mm - Profile steel shear - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Round bar shear - Round steel 50 mm - Square steel 42 mm - Notching device - For material up to 12 mm - Right-hand notching up to 52 x 90 mm - Punch press - Punching force approx. 550 kN - Stroke, infinitely adjustable 0 - 60 mm - Punches holes in steel up to 30 mm diameter in 16 mm - Overhang 320 mm - Hydraulic drive 400 V / 5.5 kW - Two separate working cylinders and separate foot switches for each - Space requirement approx. W 1400 x H 1600 x D 750 mm - Weight approx. 1300 kg - Includes: - Various punches and dies in a separate tool cabinet - Support and stop table - Stop

Condition: used, Year of construction: 1999, plate thickness 4 mm plate length 200 mm total power requirement 3 kW weight of the machine ca. 550 kg dimensions of the machine ca. 1,0 x 0,8 x 1,0 m Dwjdpfx Aey Tif Askhsa

Condition: used, Year of construction: 1990, Technical details: plate thickness: 8 mm cutting range: 300 x 300 mm table-size: 1100 x 900 mm voltage: 380 V / Hz Weight approx.: 1,7 t dimension machine xH: 1,3 x 1,2 x 1,5 m For notching of 90° sheet metal segments, works hydraulically. On the table are 2x rulers 300mm 90° offset. T-slot according to DIN 680: a=12mm, h=21mm, b=22mm, c=14mm with length = 1x 330mm and 2x 700mm Operation via control panel and foot switch Dodpfeu Ictbox Akhewa *

Condition: used, Technical details: total power requirement: 2,2 kW Dedpfx Asu Icq Tskhswa table-size: 500 x 780 mm working area: 250 x 250 mm height over floor: 940 mm voltage: 380 V / Hz Weight approx.: 0,642 t dimension machine xH: 1,0 x 1,3 x 1,2 m HYDRAULIC NOTCHING MACHINE On the table there are left and right 90° linear scales length 250mm stop bars length 400mm; angle adjustable left/right 90°) operated by switch button and/or hand/foot control incl. tool 2x upper and lower knives built in (knife length 250mm) *

Condition: ready for operation (used), Notching machine, COMACA Type 130/3mm -CE marking -Well-maintained original condition -Cutting angle 90 degrees -Work table 600x460mm -Cutting capacity 130mm -Cutting capacity 3mm / sheet thickness -Stroke rate 50-60 strokes per minute Dwedpfey T I Ngjx Akhja -Work table with T-slots/scale/adjustable angle stops -Foot pedal -Safety device Dimensions: L x W x H 0.7 x 0.7 x 1.3 meters / Weight 250 kg Errors and omissions excepted.

Condition: new, Year of construction: 2026, Suitable for Outer pipe diameter Ø 26.9(3/4″) Ø 33.7(1″) Ø 42.4(1_¼") Ø 48.3(1_1/2″) Ø 60.3(2″) Outer pipe diameter for zinc spout Ø 22 - Ø 76 Advantage: Quick and easy notching Wall thickness (steel): 5 mm Wall thickness (stainless steel): 3 mm Weight: 93 kg Operation: Electric (2.2 kW) Application: Round, square and rectangular tube Easy to operate With the motorized pipe notcher AL1-2U you can notch pipe outside diameters of Ø26.9 (3/4″), Ø337 (1″), Ø42.4 (1 ¼"), Ø48.3 (1 ½"), Ø60.3 (2″) and pipe outside diameters for zinc flow from Ø22 to Ø76. The machine is started at the push of a button and the pipe notcher is driven continuously. This allows the user to continue production without having to switch the machine on every time. Electrically driven Dwsdpjy T Raujfx Akhea With the motorized pipe notcher AL1-2U you can notch pipe outside diameters of Ø26.9 (3/4″), Ø337 (1″), Ø42.4 (1 ¼"), Ø48.3 (1 ½"), Ø60.3 (2″). Do you often notch pipes? Then the motor-driven pipe notcher AL1-2U with 2.2 kW electric motor is the solution for you! The motor forms a single unit with the special eccentric shaft that drives the punching tool. In addition, the motor is equipped with an on/off switch with 0-voltage protection and a protective cap.

Condition: used, functionality: fully functional, EUROMAC MULTI 220/6R NOTCHING MACHINE Maximum cutting length 220 mm Maximum sheet thickness 6 mm Variable cutting angle 30 - 120 WITH PUNCHING MACHINE EUROMAC Multi 220/6R 2-station notching and bending machine Press brake, press brake, cutting machine Cutting capacity steel from 6 mm to 45 kg/mm2 Becu Akmemck Ryo Iswn 4 mm for stainless steel Station I (notching) Notching angle from 60° to 140° (with special knives from 30° to 140°) Knife length 220 mm Table dimensions 950 x 640 - manual angle adjustment by handwheels - Notching angle with built-in knife set from 60° to 140° - hydraulic knife locking upper and lower - automatic cutting gap adjustment - Blank holder Djdpfowqdfxex Akhewa - Measuring tapes built into the table - Stop guides with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 tons Table dimensions 950 x 340 Working height 1100 mm - Regular lifting speed - Continuously adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4 prisms 90°, length = 415 mm - Upper tool 90°, length = 415 mm Motor power 4kW Mains connection 400 volts, 50 Hz OVERALL DIMENSIONS 115X100X125 WEIGHT: 900 KG

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Djdpfx Aksrzfh Hshowa Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 5104 € 98.51 € Dwedpfx Aoyui S Rokhsa 3/4" 26,9 mm, 1" 33,7 mm, mm 5 mm 3 mm 87 kg The motor driven AL 1-2E can be used to notch pipes with an external diameter of 26.9 mm (3/4"), 33.7 mm (1"), 42.4 mm (1 1/4"), 48.3 mm (1 1/2") and 60.3 mm (2"). Do you often have to notch pipes? If so, the motor-driven AL1-2E equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 5932 € 114.49 € 3/4" 26,9 mm, 1" 33,7 mm, mm Dwodpfjyui Sqox Akhsa 5 mm 3 mm 93 kg The motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4"), 33.7 mm (1"), 42.4 mm (1 1/4"), 48.3 mm (1 1/2") and 60.3 mm (2")and notch pipes with an external diameter of 22 mm to 76 mm for sink outflows. Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 811 € 3/4" 26,9 mm, 1" 33,7 mm, mm 3 mm Dsdpeyq Svdofx Akhjwa 2.5 mm 8 kg The AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4"), 33.7 mm (1") and 42.4 mm (1 1/4"). The hand-operated machines can be easily wall h ALMI pipe notchers filing or milling pipes has become a thing of the past. The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 979 € 1 1/2" 48,3 mm, 2" 60,3 m mm 3 mm 2.5 mm Dodpfeyq Su Hox Akhswa 15 kg The AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2") and 60.3 mm (2"). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 1063 € 1 1/4" 42,4, 1 1/2" 48,3 mm 3 mm 2.5 mm 15 kg Dedpfx Aeyq Su Tjkhjwa The AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 879 € Dedpfx Aeyq Snyekhowa 20 - 76,1 mm 3 mm 2.5 mm 7 kg The ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm. Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment. ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are immediately available.

Condition: excellent (used), Notching machine 30 - 135° INDUMASCH V 204 blade length 200 x 200 mm max. sheet thickness: mild steel 4 mm Drive power 4 kW Dimensions L x W x H 1700 x 1000 x 1500 mm Dwedpfx Akeunyk Aehsa Weight 940 kg

Condition: ready for operation (used), Year of construction: 1982, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 Hub/min angle adjustable from - to 30 - 120 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm * Machine with 1x new set of notching knives (!!) * installed in 2026 * approx. acquisition costs 1.000 Euro Dsdpfjxaaiiox Akhewa Equipment: - electro-hydraulic notching machine, with angle adjustment * Angle adjustment via hand wheels - Front control panel - Plexiglas protection for better transparency - Hardened blades also for cutting stainless steel - Planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x cutting stops * with movable and replaceable stop bars - lateral cut material ejection - Freely movable foot switch - operating instructions

Condition: used, Year of construction: 1987, plate thickness 4 mm blade length 150 mm Djdoyv Ntxjpfx Akhjwa cutting angle 30-120 ° Table dimensions 1000x650 mm

Year of construction: 2025, condition: like new (used), The machine is like new. The previous owner is out of business. Dodpfx Aoy Rpyhskhswa

Condition: good (used), Year of construction: 2000, machine/vehicle number: M 100-34 E3-D, Offer 24371 Technical data: - Machine for the production of closed cold-formed corners Dwsdpfeu Rartjx Akhoa - Material thicknesses 0.8 to 2.5 mm - max. achievable shelf height see table - min. Workpiece length / min. workpiece width 120 mm - Production time per formed corner, independent of material 10 sec. - Drive 400 V / 4 kW - Control panel with E - foot switch - Space requirement station 1 approx. W 1100 x H 1650 x D 1100 mm - Weight of station 1 approx. 800 kg - Space requirement for station 2 approx. W 800 x H 1400 x D 900 mm - Weight of station 2 approx. 500 kg