Used Schwan Optimal 300+200 for sale (29,059)

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, SHEARING MACHINE BL 3000 X 3/4 X 200 HYDRAULIC MOTORIZED BACK GAUGE USED MACHINE, IN WORKING ORDER Nedpfszfptbex Ac Tecu

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 1: KSB Blockp Etabloc 65-200/3002 GN10 IEC standard motor KSB 30 kW 2900 rpm Part No.: 48875108 Single-stage volute casing pump with rated capacities according to EN 733, fitted with KSB IEC three-phase motor, protection class IP 55, insulation class F, assembled as a block unit. Pump shaft rigidly coupled to motor shaft. Equipped with uncooled mechanical seal, corrosion-resistant shaft sleeve, replaceable wear rings. Drive lantern made of cast iron, with contact protection in accordance with EN 294. Mounting by support foot up to motor size 112, by motor foot from motor size 132 upwards. Volute casing: Cast iron Impeller: Cast iron Shaft, pump: Tempered steel Nsdpfsxbhtljx Ac Tjcu

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 2: KSB Blockp Etabloc 65-200/3002 GN10 IEC standard motor KSB 30 kW 2900 rpm Part no.: 48875108 Single-stage volute casing pump with nominal ratings according to EN 733, equipped with a KSB IEC three-phase motor, protection class IP 55, insulation class F, flange-mounted to form a monobloc unit. Pump shaft is rigidly connected to the motor shaft. Fitted with an uncooled mechanical seal, corrosion-resistant shaft sleeve, and replaceable wear rings. Drive lantern made of grey cast iron, with contact protection according to EN 294. Mounting via support foot up to motor size 112, and via motor foot from motor size 132 onwards. Volute casing: Grey cast iron Ncedpfx Acexbhtrj Tsu Impeller: Grey cast iron Shaft, pump: Tempered steel

Condition: new, Brinkmann TS 21/300-MV+211 submersible pump SN:0412003832-92658001 ,unused, 100% functional, scope of delivery as per photos Nedpfjur A Uxox Ac Tocu

Condition: ready for operation (used), GMN TSE 75 cdu x 200/30000 high-speed spindle, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nedpfxji Eaa Rs Ac Tscu

Condition: ready for operation (used), Gero F 100-200/12SO high temperature furnace 201101895 - 30 - 3000°C / Cable length green: 3.9 m, connection cable: 3.00 m, used, good condition, 100% functional, scope of delivery as per photos Ncedpsx Erpnefx Ac Tju

Condition: new, Rexroth KDS 1.1-100-300-W1-220, part number: R911220055, serial number: KDS111-763942-027, unused, in original packaging, 100% functional. Scope of delivery as shown in the photos. Njdpfxoi Ecznj Ac Tscu

Condition: ready for operation (used), GMN TSE 75 cdu x 200 high-speed spindle, SP: 12-18-30000 RPM, serial number: R336458, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nodpfxji Eaa Ho Ac Tscu

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 300-2000 CX injection molding machine Year of manufacture: 2010 We offer a high-class hydraulic injection molding machine from the renowned manufacturer Krauss Maffei. The machine is equipped with a modern MC5 control system with a color monitor, an integrated operator panel, and three USB ports. Thanks to its robust construction and high performance, it is perfectly suited for the production of thermoplastic parts. Equipment Fully hydraulic clamping system MC5 control system with color monitor Integrated control panel 3 USB ports Complete plasticizing unit for thermoplastics Ø 70 mm screw made of wear-resistant material Backflow valve Open nozzle Technical data Clamping unit Parameter Value Clamping force 3000 kN Mold opening force 169.3 kN Plate movement force – opening 86.3 kN Plate movement force – closing 67.8 kN Dimensions of mounting plates (h × v) 995 × 1050 mm Clearance between columns (h × v) 630 × 630 mm Mold opening stroke 820 mm Minimum mold height 330 mm Maximum opening stroke of plates 1150 mm Ejector stroke 200 mm Ejector force 57.7 / 28.3 kN Injection unit Parameter Value Screw diameter 70 mm Maximum injection pressure 1877 bar Injection volume 1078 cm³ Injection weight (PS) 981 g Injection rate (standard) 385 cm³/s Injection rate (with accumulator) 1155 cm³/s Screw speed 220 / 310 rpm Electro-hydraulic system Parameter Value Pump motor power 55 kW Pump motor power with accumulator 55 kW Heater power 29.2 kW Number of heating zones 6 Number of dry cycles (Euromap 6) 1350 / h Oil tank capacity 720 l Nodsza Uuzepfx Ac Tecu Dimensions and weight Parameter Value Net weight 14.5 t Dimensions (l × w × h) 6.5 × 2.2 × 2.3 m

Year of construction: 2025, condition: used, New: Yes Ncodpfx Acjvxdx Ae Tju Empty weight: 400 kg Dimensions of cargo space: 150 x 130 x 107 cm CE mark: yes Please contact Team DPX for more information

Condition: ready for operation (used), Year of construction: 2012, operating hours: 49,627 h, clamping force: 3,000 kN, screw diameter: 70 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details. • PP injection capacity: 640 g • Mould dimensions (min.): 320 mm • Tie bar spacing: 630 × 630 mm • Maximum mould opening: 1000 mm Nsdpfx Acjy S Tq Hj Tscu • Working hours: 49,627 h

Condition: ready for operation (used), Year of construction: 2011, operating hours: 49,533 h, clamping force: 3,000 kN, screw diameter: 70 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details. • PP injection capacity: 640 g • Minimum mould dimensions: 320 mm • Tie bar spacing: 630 x 630 mm • Maximum mould opening: 1000 mm Ncodpjy S Tqasfx Ac Tju • Working hours: 49,533 h

Condition: used, functionality: fully functional, coil weight: 2,000 kg, mandrel diameter: 508 mm, mandrel length: 420 mm, turntable diameter: 1,350 mm, Load capacity: 2 x 2000 kg Distance from floor to center of mandrel: 950 mm Outer diameter of stop: 1350 mm Mandrel length: 420 mm Ncsdpey Sl Rxofx Ac Tou Mandrel nominal diameter: 508 mm Coil guide rings: on both sides Braking system: pneumatic, brake disc/caliper Unwinding drive: electric, geared motor Mandrel expansion: threaded spindle with Allen key Locking of rotary bearing: foot pedal with electrical documentation Operated flawlessly in production at the customer's facility until decommissioning. We can support you with the following during integration: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate Ncjdpfsvwgpbsx Ac Tou - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 563048-200, Equipment: type plate available, Spiral conveyor by Apollo for elevating products Nodpoy Nzpxofx Ac Tjcu

Condition: new, Year of construction: 2026, neu 2026 070217 Juni 2026, Zwischenverkau Türkei 4800 € 500 kg 1200 mm 400 mm 550 mm 300 mm 50 mm 80 mm 0.55 kW 1400 mm 1200 mm 1550 mm 190 kg motorized drive Ncodpjwirz Sefx Ac Teu mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, Year of construction: 2026, neu 2026 070155 prompt, Zwischenverkauf v Türkei 6900 € 133.17 € 1 500 kg Nedpewirmuefx Ac Tjcu 1200 mm 400 mm 550 mm 300 mm 80 mm 1450 mm 1200 mm 1640 mm 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC PRESSURE ARM ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, power: 137 kW (186.27 HP), Conveyor belt continuous furnace, electrically heated, type DLE 600/200/3000 G, for soldering or annealing under exogas atmosphere. - Heating capacity: 137 kW - Soldering/annealing under exogas atmosphere - Conveyor belt width: 600 mm Njdpfx Ajy Ddtioc Tscu - Clearance above belt: 200 mm - Heated length: 3000 mm - Net throughput performance: 254 kg/h - Max. temperature: 1150 °C

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 66342/1B, conveyor belt length: 3,100 mm, conveyor belt width: 400 mm, conveyor belt speed: 50 mm/s, total height: 2,100 mm, input voltage: 480 V, input frequency: 60 Hz, For sale is a high-quality Schuma incline conveyor from the professional PRO-WAA series. Thanks to its robust construction, this belt is ideal for continuous industrial operation. Technical data: Ncedey Ec Uzopfx Ac Tou Manufacturer: SCHUMA GmbH Model: PRO-WAA 800/2000/400/300/S20 Serial number: 66342/1B Year of manufacture: 2023 Voltage: 480 V Frequency: 60 Hz Power: 0.18 kW Dimensions & geometry: Overall width (belt): approx. 400 mm Horizontal length (lower): approx. 800 mm Incline section (length): approx. 2000 mm Horizontal length (upper/discharge): approx. 300 mm Cleat height: 20 mm (S20) – ideal for small parts, granulates, or plastic components.

Year of construction: 2002, condition: ready for operation (used), A complete IGM welding system with robot is available. Robot: IGM RTI 2000, roller stand: IGM RB 300, positioner: IGM RP 300, control system: PLC/KUKA K C2, total system dimensions X/Y/Z: approx. 5250mm/4000mm/2800mm, drive time: 31091h, welding hours: 12930h, waiting time: 99278h, total time: 113051h. Without workpiece fixtures. The 6th axis of the machine can no longer be controlled. Documentation available. An on-site inspection is possible. Expected to be available in May 2026. Ncodpfxeyh Nvao Ac Tou

Condition: ready for operation (used), Year of construction: 1971, machine/vehicle number: 1-044/180, height of centers: 300 mm Ncedpfx Acjtu U Dtj Tsu center distance: 2000 mm max. circulation-Ø over bed: über Bett 620 mm spindle boring: 83 mm spindle retainer: Gr. 8 retainer taper tailstock: 5 MK spindle speed: 14 - 1000 rpm forwarding feed: längs/plan 0,086-4,842/0,04-2,258 mm/U thread pitch: 0,5 - 28 mm electrical connection: 380/400 V, 15 kW space needed: 3600 x 1200 x 1350 mm weight: 3400 kg

Condition: new, Year of construction: 2026, functionality: fully functional, BRAND-NEW, Fully functional Edwards T-Station 300 for sale in factory packaging, with a 1-year warranty. Ncodpfsyrr N Hex Ac Tou Worldwide shipping available - request a quote! If you are looking for a vacuum pump, accessories or any vacuum technology related equipment, please contact us. We are happy to help you with purchasing, technical advice or developing custom solutions.

Year of construction: 2020, condition: excellent (used), WM1 300 CNC incl. Renishaw TP 200 Ncsdpfxoyuut Ts Ac Tju Year of manufacture: 2020 Clamping tool from DK Fixiersysteme 3-axis CNC control High-resolution CCD matrix camera 1.5x magnification Incident light illumination via LED ring light, 4 sectors and 1 ring individually switchable Precision measuring table in X and Y axes Diode laser for positioning assistance Joystick and trackball for axis movement with fast/slow switching Camera-supported measurement data acquisition Precise edge detection in transmitted and incident light using intelligent image processing algorithms Compact and portable – powerful performance Easy handling with maximum measurement accuracy Special features Including Renishaw TP 200 touch probe system Switchable LED surface illumination Diode laser for positioning assistance With a measuring range of 300 mm × 200 mm × 200 mm, it excels especially in the measurement of stamped, plastic, rubber and milled parts as well as tools, profiles, and PCBs. Key features of the measuring microscope include camera-assisted data acquisition, quick operation, and its high precision. Of particular note is the precise edge detection in transmitted and reflected light, powered by smart image processing algorithms. Despite its powerful capabilities, the WM 1 300 CNC remains compact and handy with dimensions of 900 mm × 950 mm × 950 mm.

Condition: new, Year of construction: 2026, Hopper capacity: 40 [kg] Performance: Up to 140 [onions/min] Raw material size: 45 – 140 [mm] Overall width of the machine: 1050 [mm] Overall height of the machine: 1880 [mm] Overall length of the machine: 4830 [mm] Number of working paths: 2 Onion loading height: 1000 [mm] Onion discharge height: 700 [mm] Ncodjd Nimajpfx Ac Tsu Waste discharge height: 400 [mm] Power supply: 3 x 400 [V] / 50 [Hz] Installed power: 1.2 [kW] Compressed air connection: 8-10 [bar] Air consumption: 1.9 [m3/min] Noise level: Above 80 [dB] Material of the structure: Stainless steel and plastics approved for food contact CE certificate: Yes Topping cutter: No

Condition: new, plate width 2000 mm plate depth 4000 mm plate height 300 mm weight 5195 kg Clamping plates - T-slot plates - plate field 4000 x 2000 x 260 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this we can a custom made panel for you. edge distance: 240mm groove spacing: 230mm Groove size: 22mm Casting quality HT250 Ncedpsyq S Exefx Ac Tou Flatness less than 0.12 mm Surface machined according to DIN 876/III The cover picture is for orientation only and does not represent a true-to- scale image of the plate.