Used Scm Flex 1 for sale (78,167)

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Special SCM guide system for the saw carriage. The curved design between the ball bearings and running guides, as well as the hardened contact surfaces, ensure exceptional and consistent precision. The scoring unit can be easily swung in and out from the outside; a special plate enables precise positioning. The rip fence is extremely robust and can be used for both longitudinal and mitre cuts; quick reset to the starting position. The precise flip stops allow for direct reading of measurements along the entire length. Table dimensions: 830 x 1200 mm Saw carriage: 1500 x 290 mm Cutting length: 1500 mm Saw blade tilting: 45° Max. main saw blade diameter: 300 mm Max. scoring saw blade diameter: 100 mm Max. cutting height at 90°: 95 mm Max. cutting height at 45°: 67 mm Saw blade speed: 4,000 rpm Scoring saw speed: 8,000 rpm Cutting width with parallel fence: 1,000 mm Extraction port diameter: 100 mm Motor: 4 kW Crodpsy Nugdefx Ad Njb Weight: 425 kg Availability: short notice Location: Röllbach

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW with 4-roller feed, fixed speeds. Speed extensions. Height of worktable: 920 mm. Spindle tilting: -10° + 45°. Max. spindle projection above table: 175 mm. Spindle speeds: 3250/6500-5000/10000 rpm. Max. tool diameter: 250 mm. Weight: approx. 950 kg. Location: Nattheim. Codpjw Enw Iofx Ad Nerb

Condition: good (used), Year of construction: 2018, functionality: fully functional, Horizontal panel saw / Horizontal beam saw with lift table loading Manufacturer: SCM / Gabbiani Model: Gabbiani ST 115 Year of manufacture: 2018 Horizontal pressure beam saw with rear lift table loading, previously used in a parquet factory. Cutting length approx. 3200 mm Cutting depth on the lift table approx. 1850 mm Max. stack height on the lift table (with supports) approx. 600 mm Saw blade projection 115 mm Variable saw carriage speed: 0 - 135 m/min Variable pusher speed: 0 - 70 m/min Main saw motor approx. 9 kW Main saw blade speed: 3900 rpm Saw blade diameter: 400 mm Scoring saw motor approx. 1.8 kW Scoring saw speed: 6300 rpm Scoring saw blade diameter: 160 mm 6 clamps (3 of which include a front aligner) Crodoy H Up Hopfx Ad Nob 2 air-cushion tables, each with blower Voltage: 400 V, 3-phase, 50 Hz, 43 A Approximate weight: 5500 kg

Year of construction: 2008, condition: used, Mortise spindle Cjdpfey Hpk Eex Ad Nsrb Raboter chariot 380V

Condition: used, Year of construction: 2008, Sackson width planing 410mm Crodpfx Adey Hpkfo Neb Electrical rise and fall 380V

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Csdpfxjr A Eq Re Ad Nsrb Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: new, both working tables open at the same time! working width 410 mm cutter block DM 95 mm knife dimensions 410 x 30 x 3 max. chip removal 5 mm working table length 2200 mm Csdpfx Aodvn Hwsd Njrb thicknesses table dim. 410 x 775 mm feed speed 6/12 m/ min min. ÷ max. work piece height 3 ÷ 240 mm Motorleistung 5,0 kW, 400V, 50 Hz incl. options: "Tersa”-cuter block Ø 95 mm, with 4 pcs knifes auxiliary fence for small work pieces electric height adjustment for thicknessing table with digital readout

Condition: new, Sturdy cast steel construction High-precision sizing slide made of anodized aluminium with a travel of 2250 mm Maximum saw blade diameter of 315 mm possible, saw blade can be tilted 45 Large trimming frame (960 x 600 mm) with telescopic aluminum fence that can be extended up to 2660 mm Heavily ribbed dressing work tables made of gray cast iron, re-annealed and stress-free for decades of stability and flatness Helical toothed steel feed roller for even material feed Three milling speeds, manually adjustable Milling spindle with right/left rotation Three independent industrial motors With lockable main switch, motor protection switch, emergency stop switch Dressing table width 410 mm Dressing table length 1810 mm Chip removal max. 4 mm Thicknessing table length 605 mm Crodpeiiynnefx Ad Neb Thicknessing table width 410 mm Working height min. 3 mm Working height max. 230 mm Feed speed 7 m/min Chip removal max. 4 mm Suction nozzle diameter 4 x 120 mm Planer cutterblock type TERSA (3 pcs.) Planer shaft diameter 72 mm Speed 5200 min-¹ Circular saw Edging length 2250 mm Cutting width with rip fence 900 mm Max. Cutting width to the left of the saw blade 2310 mm Saw blade inclination 90 - 45 ° Max. Cutting height at 90° 90 mm Max. Cutting height at 45° 63 mm Saw blade diameter 315 mm Saw blade speed 4000 min-¹ Sliding carriage and table Length of sliding table 2600 mm Spindle diameter 30 mm Speeds 3500/7000/ 10000 min-¹ Milling tool diameter max. lowerable/ not lowerable 180/ 210 mm Power drive motor 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx. 560 kg INCLUDING OPTIONS - Handwheel with gravitational-numerical display for thicknessing table positioning - Sliding carriage length 2600 mm - Professional stops - "TERSA" planer cutterhead - Right-left rotation of the cutter

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Cjdpfetwzyfsx Ad Norb Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Sanding belt width/length mm: 1,370/2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" skew-grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combination: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (on/off) for automatic engagement/disengagement of the sanding roller sanding pad unit - Activation of segments via electronic control, which synchronizes their operation with feed speed and manages the number of active segments based on the workpiece geometry, allowing selection of more or fewer segments to the left or right of the workpiece. Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece scanning bar at infeed Additional equipment: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4” display with ‘eye S’ software integration Crjdpfx Adjhtuvro Nob NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm Credpfx Asd Supgjd Neb no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: new, spindle moulder with tillable spindle guaranteed quality at your finger tips - easy-to-use the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button carriage on work table for tenoning works incl. fence and work piece clamp incl. feeder unit STEFF 2048 4 rollers 8 speeds Codpfxjcuwpts Ad Nerb work table dimensions 1200 (2500) x 855 mm spindle DM 30 mm usable spindle lenght 125 mm max. tool DM under table 240 x 80 mm suction connection DM 2 x 120 mm motor 5,5 kW INcL. OPTIONS: version 'LL' with long cast iron tables (2500 mm) & pull out work piece support in front fence with hand wheel adjustment and numerical read out machine dimensions L x B x H = 2500 x 855 x 900 weight approx. 500 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Crodpfxsfh Tmmo Ad Nsb Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: used, Year of construction: 2011, AXES Working Range X-Y-Z Axes * mm 3050-1300-180 Workpiece length for pendulum operation mm 1390 Stroke X-Y-Z Axes mm 3460-1735-250 Max. traverse speed of X-Y axes m/min 60 WORK TABLE Number of workpiece supports and vacuum cups 6 / 2 standard type Standard end stops / position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles std/quantity/speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles std/quantity/speed 1/min 6 (4X-2Y) / 4000 Integrated grooving / saw unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power std./opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer traveling with unit carrier in X 4 places, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction connection diameter mm 150+150 (200) Machine weight Kg 3000 * X: distance between stops; Y: milling center as reference point; Z: workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center, C-frame design, and worktable with adjustable workpiece supports and vacuum suction cups, for: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Groove milling with disc cutter in the “X” direction - General milling work Self-supporting structure and work table Structure made from welded steel construction with control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV carrier options. Box construction made from cold-rolled steel with internal stiffening ribs and protective devices comprising a drilling head with vertical spindles, horizontal spindles, an integrated grooving and saw unit, and an SCM electrospindle with HSK 63 F quick-change tool system. Movement paths of the portal and unit carrier Movement in the X, Y, and Z axes is via linear prismatic guideways with preloaded ball bearings. The X-axis movement (moving gantry) uses a preloaded, backlash-free rack-and-pinion drive with helical gearing. Movement of the unit carrier in Y and Z directions is also preloaded for precision. Positioning of the working units and machine function control is through "brushless" AC servo motors and digital drives. CNC CONTROL The control unit comprises a numerical control for the milling and drilling machines and a PC with a graphical user interface "XILOG PLUS". Cjdpfx Adeyymz Uo Njrb PC office operating system Windows XP - 17" LCD color screen - QWERTY keyboard - Swiveling control panel - Machine interface: Xilog Plus software Xilog Plus Features Programming - Parametric, graphical, and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation on three axes, spatially linear, spirally on selected plane - Supported programming with graphical and syntax assistance for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Possibility to shift panel zero point for drilling on slanted or curved panel sides - Full compatibility with CAD/CAM Routocam (SCM) – AlphaCam Integrated additional functions - Calculator for direct transfer of computed data - S

Condition: used, Year of construction: 1990, Design: rigid Table size: 1200x730 mm Table height: 900 mm Speeds: 3000/4500/6000/7000/10000 rpm Milling arbor diameter: 30 mm Spindle adjustment: manual Usable spindle length: 180 mm Spindle right/left rotation: Yes Speed display: optical Automatic motor brake: mechanical Foot brake Jaw stop type: wooden Stop adjustment: manual Power feed unit: with 3 rollers Control panel position: bottom Weight approx.: 600 kg Motor power: 4 kW Extraction diameter: 120/120 mm Storage location: Credpfx Adoy H Nhws Nob

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: AB /139622, functionality: fully functional, input frequency: 50 Hz, pivoting range: 56 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,300 rpm, Equipment: CE marking, rotational speed infinitely variable, We are offering this well-maintained SCM T 150 Class spindle moulder, year of manufacture 2000. Description: Spindle moulder with 3-axis control and 999 program memory slots (spindle height, fence, spindle tilt, revolutions) Spindle tilt -10° to +46° Inverter motor, adjustable spindle speed from 3,300 to 10,000 rpm Table extensions at front and rear Swivelling fence Codpfjy Ir Ezjx Ad Norb Clearance between cutter and table is adjustable Very good condition, minor signs of use Including accessories: • 5 additional SK40 quick-change spindles • Curved fence • Power feeder with stand • Various hand tools If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Csdpfx Adey H N Tms Nsrb Oscillation overhauled and adjusted. Test run conducted Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working area X: 3800 mm Working area Y: 1640 mm 5-axis electrospindle Vertical drilling spindles: 13 Horizontal drilling spindles X: 6 Horizontal drilling spindles Y: 4 Crodpfx Asy Nyycod Nob Grooving saw in X direction Linear tool changer with approx. 13 positions Tool changer with 14 positions Worktable with 6 beams Software: Maestro Active Control panel 1 vacuum pump Weight approx. 4,250 kg Only 1,611 operating hours!

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 The T 110 is the spindle moulder from SCM, optimally combining quality and affordability. The construction is extremely robust. For convenient operation, all controls are arranged within easy reach on the front of the machine. Precise height adjustment of the tool is ensured by a mechanical display. Spindle tilting from -5 to +45 degrees. Table size: 1000 x 750 mm Spindle clamping length: 140 mm Spindle projection above table: 20 mm Spindle speeds: 3000-4500-6000-9000-10000 rpm Maximum diameter of tool retractable under the table: 320 x 40 mm Profiling tool max. diameter: 250 mm Motor: 4 kW Extraction nozzle: 120 mm Comes with 3-roller feed unit Weight: 520 kg Crjdpfx Adjy Ih Tuo Nsb Availability: short-term Location: Röllbach

Condition: excellent (used), Year of construction: 2005, Working area X: 6050 mm Cjdpfey Nfmuox Ad Njrb Working area Y: 1300 mm 4-axis Electrospindle Door milling unit Tool changer with approx. 24 positions Worktable with 10 beams Chip conveyor belt Safety mats Weight approx. 6400 kg Includes 16 clamps, suction cups, and Freud cutters for wooden and wood-aluminium profiles 68/82/92, and spare electrospindle Ideal machine configuration for windows, frames, and doors

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Csdpsw Dcccefx Ad Nerb

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Codpfew Dcb Sex Ad Nsrb

Condition: excellent (used), functionality: fully functional, edge thickness (max.): 45 mm, total height: 1,650 mm, total length: 2,800 mm, total width: 1,220 mm, overall weight: 660 kg, Equipment: CE marking, documentation/manual, Used edge banding machine after technical inspection. - Italian production - Not repainted - Very good condition - Used edge bander Technical parameters Equipment: - Plate - Glue tank (granulate) - Guillotine – pre-cutting of edge band Crodpfey Iv R Ujx Ad Neb - Unit for final trimming of edges with saw blade - 2 milling units for top/bottom edge processing - 2 scrapers for removing excess glue - 2 polishers - Max workpiece thickness: 45mm - Min workpiece width: 50mm - Min workpiece length: 150mm - Extraction port diameter: 60mm - Compressed air pressure: 6 bar Overall dimensions: - Length: 2800 mm - Width: 1220 mm - Height: 1650 mm - Weight: 660 kg Where can you inspect our machines? JBS MASZYNY STOLARSKIE WOLICA DRUGA 26 23-310 MODLIBORZYCE LUBELSKIE VOIVODESHIP

Condition: used, machine/vehicle number: 008047, Position 1: Brushing Machines SCM-BRAVOROBOT P1 Position 2: spraying machine SCM-BRAVOROBOT P1 Crjdpfx Adew Idbyo Nsb Position 3: Roller Conveyors SCM-BRAVOROBOT P1 Position 4: Compressed Air Dryers SCM-BRAVOROBOT P1 Position 5: Ovens SCM-BRAVOROBOT P1

Condition: used, Year of construction: 2011, Working size in X-direction: 2770 mm Working size in Y-direction: 1220 mm Working thickness (Z-dimension): 80 mm Machine design: Gantry-type machine Main spindle power: 11.0 kW Main spindle speed: 1500 - 24000 rpm Vector controlled spindle: Yes Clamping system: HSK 63 F Spindle cooling: Air cooling Number of axes: 3 Tool changer: Yes Tool changer positions: 10 Keyboard: Yes Mouse: Yes Programming system: Xilog Plus DXF interface: Yes Codpevvi Htjfx Ad Nerb Online connection possible: Yes CD-ROM drive: Yes Table type: Matrix table Stop system: Stop cylinders Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Safety: Safety tread mats Storage location: Sonnefeld