Used Scrap Shear for sale (1,962)

Year of construction: 2024, condition: new, - Cutting Force : 1100 Tons - Capacity : up tp 50 tons per hour - Side Compression Force : 2 x 120 Tons - Clemp Compression Force : 160 Tons - Electric Motor : 264 kW - Machine Weight : 85.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable Gedpfx Ajdfcpajfuokc

Condition: good (used), functionality: fully functional, Year of construction: 2006, Used M Shear from Safan Model: M Shear 430 6 TS 200 Capacity: 4300 x 6 mm Automatic setting of cutting gap, cutting angle, and back gauge Equipped with pneumatic sheet support at the rear Return to sender feature Scrap container Entry safety barrier Gedpfey H D I Eex Afuokc

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, machine/vehicle number: REFLEX 36290, This is a fully functional machine that will be ready for delivery in December 2025. It includes a loading table - it has dimensions of 6000 * 2500 mm. The length of the chamber is 6000 mm. The expected status as of December 31, 2025 will be approximately 8,800 hours. The machine is located at: U Panelárny 461, Předměřice nad Labem. Gksdpfjwhnbfex Afusc

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm Gjdpfx Afsxab Tvouekc 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück Gkedpfx Aozycpxefusc strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Condition: ready for operation (used), Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück Gjdpfxoxaaghe Afuskc cutting angle 0°40 - 2°20 Grad 3340 mm work height max. 860 mm 575 mm Control GP 37W2 13 - 33 Number of working hours ca. 15.800 h 0 max. 315 bar oil volume 100 ltr. total power requirement 6.0 kW weight of the machine ca. 6030 + 1850 kg In good condition (!!) current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms

Condition: excellent (used), DAGE Series 4000 PXY – Bond Tester / Shear & Pull Tester for Connection Strength Testing Gsdpjzma Skjfx Afujkc

Condition: good (used), Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Pressore stroke mm 100 Pressor width mm 550 Min width to be cut mm 18 Max width to be cut mm 530 Scrap adjustment field mm 0/50 Gsdpfx Afjqzky Ejuskc Photoelectric cells Electronic programmer allowing to program the number of cuts to be effectuated and the relevant width Perimeter protections Total power installed Kw 13, 9 Operating pressure bar 6/7 Overall dimensions mm 5200 x 1700 x 1800 h Weight kg 9000

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Gsdpfx Aszma Tbofujkc Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: used, Year of construction: 1971, operating hours: 12,345,678 h, functionality: fully functional, machine/vehicle number: M4514, Slitting shear with adjustable table for rubber sheets. Gkjdpfx Aoz Rm R Tofuec The desired cutting size can be variably adjusted, and the table feed is automatic. The shear operates smoothly.

Condition: ready for operation (used), Year of construction: 1978, Immediately available, free of any bankruptcy claims: Universal profiling steel shear with hole punch, Mubea Type KBL 11 N Gedpjz Ixn Refx Afujkc Year of manufacture 1978 Pressing force 35 tons Reach 320 mm Punching round holes up to 33 mm in diameter Cutting square sections up to 30 x 30 mm Cutting flat steel 100 x 10 mm Cutting angle iron 130 x 13 mm Cutting T-profiles 60 x 8 mm Various hole punches Weight 2 tons Price: EUR 1,750.00 plus VAT, ex works.

Condition: good (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 4702, stroke rate (max.): 18 1/min, power: 11 kW (14.96 HP), input voltage: 380 V, input frequency: 50 Hz, operating pressure: 200 bar, overall weight: 5,250 kg, total length: 3,860 mm, total width: 2,500 mm, total height: 1,560 mm, BAYKAL 3100 X 6 Plate Shear - Cutting capacity: 6 mm Gkjdjz Nftkjpfx Afusc - Cutting length: 3060 mm FCA D-35614 Aßlar - loaded onto a truck.

Condition: ready for operation (used), Year of construction: 1981, Available for immediate pickup from our location: Hydraulic plate shear, Köllschen Type BSH 2000/12.5 Year of manufacture: 1981 Cutting length: 2050 mm Material thickness: up to 12.5 mm Gkedjz Ixmgopfx Afujc Electric back gauge, adjustable from 5 – 1000 mm Drive power: 15 kW Weight: 11 tons Price: EUR 2,500.00 plus VAT, ex works.

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Model 210 / 16 Year of manufacture: 1977 Pressing force: 60 t Punching: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm T profile 45 degrees: 100 x 11 mm Gkjdsz Ixpujpfx Afujc Drive: 5.5 kW Weight: 3 t Many punching tools included Price: €1,500 plus VAT, ex site

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2528006, Sheet metal shear, 2 m, the blade is new, and maintenance has been performed by Fasti’s service department, including the replacement of the conveyor belts. The Fasti-Matik FM 5.1 S is a modern program control for hydraulic sheet metal shears. · Simple program creation · Clear presentation of the programs · User-friendly program management · 4 controllable axes: · 1 x upper blade · 1 x motor stop · 1 x shear angle · 1 x cutting gap · 4 additional function connections (R1 to R4) · Data input via LCD touch screen · Basic data consisting of information for: · Material strength [N/mm²] · Sheet thickness [mm / Inch*] · Number of program cycles · Program set consisting of information for: · Number of cuts · Dimension of the motor stop * [mm / Inch*] · Cutting length [mm / Inch*] · Shear angle [°] · Cutting gap [mm / Inch*] · Auxiliary function "reverse stop" [yes / no] · Auxiliary function "with sheet holding" [yes / no] · Auxiliary function "open clamp at TDC" [yes / no] Features Protection class IP 65 · 11.3“ color LCD touch screen display Gkodpfx Afoz R Dgxeuoc · Non-volatile memory for machine parameters · Material memory for 20 workpiece materials · Non-volatile memory for 15 programs, each with 20 steps · Max. 99 cycles per cutting sequence · Operating modes: Step Manual Automatic · Information aids: Actual value display, error display · Error detection and display of the error in plain text.

Condition: used, functionality: fully functional, Year of construction: 2001, machine/vehicle number: 10730, control type: manual, degree of automation: manual, actuation type: electric, overall weight: 2,400 kg, total length: 2,310 mm, total width: 1,200 mm, total height: 2,050 mm, Equipment: CE marking, emergency stop, foot remote control, The machine is used but in working condition. On-site testing is possible. I can send more photos and a video. Sold without warranty or guarantee. Gkodez Iwh Aspfx Afuoc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 14418, controller model: Elgo, working width: 4,060 mm, sheet thickness (max.): 6 mm, overall weight: 9,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. working width: 4,060 mm Back gauge depth: 1,000 mm MACHINE DETAILS Control system: Elgo Power: 11 kW Dimensions & Weight Dimensions (L x W x H): 4,900 x 2,400 x 1,750 mm Weight: 9,500 kg EQUIPMENT Digital display Pneumatic sheet support system Safety light curtain Design: Swinging beam Gksdez Nit Iepfx Afujc Drive type: Hydraulic Control: Conventional Back gauge type: Electric Angle adjustment: Motorized Shear gap adjustment: Motorized Table type: Fixed table CE marking

Condition: good (used), Year of construction: 1975, working width: 3,100 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, back gauge: 700 mm, overall weight: 6,000 kg, total length: 3,400 mm, total width: 2,200 mm, total height: 1,800 mm, cutting length (max.): 3,100 mm, throat depth: 300 mm, Cutting length 3100 mm, cutting capacity 10 mm, motor 15 KW, working high 800 mm, back gauge 700 mm motorised, footpedal, 3 frontarms, fingerstop, pneumatic back support, cutting angle adjustable, dimension 3400x2200x1800 mm, weight ca. 6000 kgs Godpjvvwdysfx Afuokc

Condition: good (used), functionality: fully functional, Cut: 1540 x 3.5 mm – Handle recesses in the table – motorized stop Gkodoz R Rihepfx Afusc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 6.922.191.908, controller model: Cybelec D-Touch 7, working width: 4,100 mm, sheet thickness (max.): 6 mm, overall weight: 10,470 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gkedpfsz Nippjx Afujc Max. sheet thickness: 6 mm Max. working width: 4,100 mm Type of back gauge: Electric Back gauge depth: 1,000 mm MACHINE DETAILS Control system: CNC Control system brand: Cybelec Control system type: D-Touch 7 Drive type: Hydraulic Power: 11.0 kW Dimensions & Weight Dimensions (L x W x H): 5,100 x 2,300 x 2,400 mm Weight: 10,470 kg Transport packages: 1 unit EQUIPMENT Pneumatic sheet support system Fixed finger guard with flip-up protection Ball-bearing table Angle adjustment: Motorized Cutting clearance adjustment: Motorized CE marking

Condition: used, Year of construction: 2011, total length: 3,800 mm, total width: 2,000 mm, total height: 1,900 mm, Colour: Grey Weight: 6.000 kg - Year: 2011 - Documentation available: Yes - CE marking present: Yes - Serial number: 22106 - Drive system: Teach-in - Control system brand: Robosoft - Control system type: SP8 - Drive type: Hydraulic - Configuration: Guillotine - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Cutting speed [mm/min]: 22 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Manual - Table type: Fixed table - Options: Digital readout - Transport dimensions: 3800mm x 2000mm x 1900mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information Gsdpfx Afsy Nk S Asujkc VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, Year of construction: 1985, operating hours: 27,150 h, machine/vehicle number: 2723007, control type: NC control, actuation type: hydraulic, working width: 3,000 mm, sheet thickness (max.): 4 mm, overall weight: 5,500 kg, total length: 4,000 mm, total width: 2,500 mm, total height: 1,700 mm, number of support arms: 3, Equipment: angle stop, documentation/manual, type plate available, This machine is still in use in the factory during the manufacturing process and is ready for demonstration immediately. Gjdpfx Afjz Imcieujkc

Condition: good (used), Year of construction: 1983, Sheet metal width: 6200 mm Gkjdsz Rnz Hopfx Afujc Sheet metal thickness: 8 mm Overhang: 60 mm Stand spacing: 6400 mm Cutting angle adjustment: 0.5 to 2° Total power requirement: 13 kW Machine weight (approx.): 19 t

Condition: ready for operation (used), Year of construction: 1982, Available immediately ex-works: Plate shear Schröder Capacity: 2500 x 4 mm Cutting length: 2550 mm Material thickness up to 4 mm Electric back gauge: 1000 mm Drive: 5.5 kW Gsdpfxez Ixm He Afuokc Weight: 3.5 tons Price: EUR 3,500.00 plus VAT, ex-works

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, sheet thickness (max.): 12 mm, overall weight: 8,000 kg, working length: 3,000 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Max. sheet thickness, steel: 12 mm Tensile strength, steel: 450 N/mm² Working length: 3,000 mm Max. feed rate: 88 mm/s Performance data Power: 22 kW Tool weight: 31.5 kg MACHINE DETAILS Power: 22 kW Input voltage: 380 V Input frequency: 50 Hz Dimensions & Weight Gksdpfx Afez Nnvbousc Dimensions (L x W x H): 4,500 x 2,600 x 2,100 mm Total weight: 8,000 kg External Reference: Zafa - Lot 12