Used Scrap Shear for sale (1,914)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, sheet thickness (max.): 6 mm, Equipment: emergency stop, finger protection, safety light barrier, in excellent condition, ready for use. Rcjdpfx Ajzlpgbjb Tef

Condition: used, Year of construction: 1998, plate thickness 16 mm cutting length 4075 mm weight 23 t Rcodeztfvnepfx Ab Tsf output 45 kw

Condition: used, Have we aroused your interest? Then please register on our homepage - we look forward to hearing from you! Rcjdpfx Asztw Hxeb Tef Your Maschinen Besmann Team We have an Amada Promecam GTH 420 for sale, which was manufactured in France. Due to its size, it also fits into a smaller workshop. Amada Promecam 420 GTH guillotine shears Manufacturer: Amada Type: Promecam 420 GTH Condition: used Cutting length: 2000 mm material thickness: 4mm in steel Backgauge: electric, 750 mm Motor power: 5,5 KW Weight: approx. 3300 kg

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! . Equipment: Left side gauge, 750 mm Redpfozt Sxvex Ab Tocf Cutting gap adjustment Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry

Condition: good (used), functionality: fully functional, Very robust cardboard cutter/guillotine cutter made of cast iron. Cutting length approx. 100 cm, very clean cut! Functions perfectly. Rsdjzuw Hbjpfx Ab Tscf Includes cross angle and guide angle. 250 kg.

Condition: good (used), Year of construction: 2005, sheet width 3050 mm plate thickness 12.0 mm ST plate thickness 8.0 mm VA no. of strokes 7 - 14 Hub/min down holder 18 Stück cutting angle 0.5 - 3.0 ° work height max. 930 mm back stop - adjustable 1000 mm Control SP 8 total power requirement 22.5 kW weight 8500 kg range L-W-H 4180 x 2030 x 2210 mm from a maintenance workshop good / well-maintained condition (!!) Equipment: - electro-hydraulic guillotine shear with guided blade beam Rjdpszr Rqnsfx Ab Tecf - includes HACO NC control system "SP 9" * in like-new condition * backgauge pre-selection positioning * digital display of actual value * electro-hydraulic cutting angle adjustment with digital display * emergency stop switch - NC motorized backgauge on recirculating ball screws - manual blade gap adjustment, adjustable from the rear - front finger guard - 1x side gauge ... 1,000 mm - rear sheet metal chute - 1x movable foot pedal - operating manual

Condition: used, Year of construction: 1990, plate thickness 5 mm cutting length 3000 mm rear stop 750 mm total power requirement 7,5-10 kW weight of the machine ca. 4 t Rsdpfx Abeztf Azo Tecf

Condition: excellent (used), Year of construction: 2016, Cidan CNC plate shear in top condition. I would be happy to send you a video! The shear is in very good technical and optical condition; all bearings are in perfect order. The machine comes from a small business and has been well-maintained and serviced accordingly. Ideal for sheet metal workers, roofers, carpenters, metalworkers, or workshops looking for a precise and reliable bending machine. Advantages of the machine: • Brand quality from Cidan • Very good condition • Precise operation • Ready for immediate use • Robust professional machine Sale: • Machine price, net • You will receive a proper invoice with VAT shown • Shipping or freight forwarding possible (upon request) • Inspection possible by appointment Please note: If you are interested, please contact us by phone. Phone: You can also find other sheet metal working machines and matching shears in my other listings. Quality you can rely on. Are you looking for an honest, stable in value, and technically sound machine? Rcodpezunvtefx Ab Tof

Condition: used, Year of construction: 2008, Cutting bench, cutting shear Type: Hydraulic Rcodpjzry Szjfx Ab Tef Manufacturer: Colmal Type: HS 40-13 Year: 2008 Controller: Delem DAC-350 Cutting width: 4050 mm Max. thickness: 13mm Incl. documentation and peripherals Incl. outfeed-conveyor Machine dimensions: 4800x2400x2650mm Machine weight: 15000kg - Year: 2008 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1974, total length: 1,700 mm, total width: 1,400 mm, total height: 1,200 mm, Colour: Grey Weight: 1.000 kg - Year: 1974 - Documentation available: No - CE certificate present: No - Serial number: 72 - Drive system: Conventional - Drive type: Mechanical - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 1050 - Backgauge type: Manual - Backgauge depth [mm]: 500 - Table type: Standard table - Transport dimensions: 1700mm x 1400mm x 1200mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Redpjzry Suefx Ab Tscf

Condition: used, total length: 2,500 mm, total width: 1,700 mm, total height: 1,500 mm, Colour: Grey Weight: 2.050 kg - Documentation available: Yes - CE certificate present: No - Serial number: 14/9 - Drive system: Conventional - Drive type: Mechanical - Configuration: Swing-beam Rcsdpfx Abjzry Snj Tof - Power [kW]: 5.5 - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 2040 - Cutting speed [mm/min]: 50 - Throat depth [mm]: 100 - Backgauge depth [mm]: 550 - Angle adjustment: Manual - Transport dimensions: 2500mm x 1700mm x 1500mm (l x w x h) - Transport weight [kg]: 2050kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1986, actuation type: electric, working width: 1,100 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: manual, back gauge: 600 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 1,200 kg, Equipment: foot remote control, type plate available, Well-maintained and fully functional mechanical shear. Redpfjzrp N Aox Ab Tjcf

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, overall weight: 720 kg, total length: 320 mm, cutting length (max.): 300 mm, Alligator shears JMC 320 Fully overhauled, as new IMMEDIATELY available from stock IUT Beyeler AG, DE-06188 Landsberg. Financing and rental possible. We are looking for used alligator clippers! 12-month warranty The well established 320 Shear is a must for any yard and is now recognised as the industry standard for all shears of this type. One of our most popular shears, the McIntyre 320 Shear has maintained dominance in a demanding market due to its strength, quality and reliability The 320 is powerful enough to deal with a wide range of cutting and cleaning operations and is able to handle; automotive scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and of course all the usual non ferrous metal separations. The 320 can also be used to cut ferrous metals. Rsdpfxjfxvkls Ab Tscf Every shear comes with 1 year guarantee, spare parts can be delivered within 24 hours to whole europe.

Year of construction: 2026, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (at ). Westtech Woodcracker R900 Grapple / Year of manufacture: 2026 / DEMO unit / in stock & immediately available / in top condition! Price: €21,290.00 net / €25,335.10 gross Rodpfxoztipfo Ab Tocf - Grapple opening: 955 mm - Cutting force (depending on operating pressure): up to 45 t - Own weight: 1,200 kg - Recommended flow rate: 100 - 190 l/min - Recommended operating pressure: 240 - 280 bar - Service weight of carrier vehicle: 25 t Optional: - MS10 adapter plate (currently installed): €1,990.00 net We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. In our warehouse, we have a very large selection of various Westtech products that are immediately available! Mr. Herden (Tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Westtech Woodcracker range! Errors and prior sale excepted! Internal No.: 125263 = Further information = New: No Intended use: Construction Unladen weight: 1,200 kg Please contact Marius Herden for further information.

Condition: new, functionality: fully functional, Year of construction: 2010, overall weight: 4,500 kg, HACO HSLX 3006 in new condition Equipped with a new set of blades and a new control system. Technical condition: Excellent Capacity for regular steel: 6 mm (400 N/mm2) Length of back gauge: 750 mm Control system: SC 101 (NEW) Max. cutting angle: 3.0° Number of clamps: 18 Strokes per minute at the smallest angle: 14 Strokes per minute at the largest angle: 8 Working height: 770 mm Motor power: 7.5 kW Total length: 3800 mm Total height: 1750 mm Total width: 1650 mm Total width with CE guarding: 2700 mm Rsdpfx Aezrgf Usb Tecf Weight approx. 4500 kg Year of manufacture: 2010 Delivery and installation at your location are, of course, possible; delivery costs and any additional charges will be agreed upon. Since 2019, we have been the Dutch dealer for HACO press brakes and shears. In addition to the sale of sheet metal processing machines, we offer a complete package for service, maintenance, and repairs.

Condition: new, Year of construction: 2026, neu 2026 090222 prompt, Zwischenverkauf v Spanien 15800 € 303.36 € 1 1 50 to 177 mm 5 1 31 x 12 mm 34 1/min 350 x 15 mm 80 x 8 mm 35 / 30 mm 10 mm 100 x 10 mm 3 kW 1300 mm 1100 mm 1850 mm 950 kg with bending station capacity 50 to 5 working stations flat steel shear with device to reduce deformation 350 x 10 mm with adjustment 2° 350 x 15 mm with adjustment 5° angle iron shear 80 x 8 mm with round- and squarebars opening 35/30 mm recangular notcher 90 x 42 x 10 mm punching station 31 x 12 mm press brake device for flat steel max. 100 x 10 mm table at flat steel station table at notching station manual backgauge with electric contact 2 dies V40 and V70 gap at punching station 177 mm vertical movement of all stations (nor radial) hydraulic drive 1 foot release Rjdpjwirahjfx Ab Tocf user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES!

Condition: ready for operation (used), HAULICK slitting shear for rolled sheet metal / rotary knife shear -Max. sheet thickness: approx. 2.5 mm -Cutting length: endless (unlimited) -Cutting method: 2 rotating circular knives -Knife diameter: approx. 120 – 150 mm -Table size: approx. 500 x 250 mm -Overhang / feed area: approx. 250 mm -Motor power: 0.75 – 1.1 kW -Drive: belt drive -Straight cuts -Strip cutting Rsdjztctwepfx Ab Tocf -Endless cutting of sheet metal -Steel sheet up to approx. 2.5 mm -Aluminum and non-ferrous metals, correspondingly thicker Dimensions: L x W x H 0.6 x 0.9 x 1.1 meters / Weight 180 kg Errors and omissions excepted

Year of construction: 1980, condition: used, Shearing jaws. Rjdpjzr Iphefx Ab Tocf

Condition: used, Year of construction: 2013, control type: CNC control, controller manufacturer: ELGA, working width: 3,100 mm, sheet thickness (max.): 6 mm, power: 10 kW (13.60 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 210 bar, pressure (max.): 210 bar, overall weight: 6,000 kg, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, We offer this used UZMA HSB 3006 guillotine shear, year of construction 2013. Type: HSB 3006 Year of Manufacture: 2013 Series Number: 1308144 Maximum Cutting Length: 3100 mm Rcjdpfx Aezt Hguob Tef Maximum Cutting Thickness: 6 mm Maximum Hydraulic Pressure: 210 Bar Approximate Weight: 6000 kg Main Motor Power: 10 kW Voltage: 400 Volt Number of Phases: 3Ph + N + GND Frequency: 50 Hz Overall Full Load Current: 25 A Minimum Light Beam Distance from Blades: 1860 mm If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1994, machine/vehicle number: 94102, Offer 26181 Technical Data: - max. working width 2540 mm - max. cutting capacity St 40 10 mm - Cutting angle adjustable, motorized 0.5 - 3 ° - Manual cutting gap adjustment - Number of hydraulic clamping cylinders 15 pcs - Motorized rear stop with positioning control 10 - 1000 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 strokes/min - Hydraulic drive 400 V / 15 kW - Table height 770 mm Redpfxezruf Ne Ab Tocf - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 7500 kg - Including: - Electronic foot switch - Cutting line illumination

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2009, working width: 3,000 mm, sheet thickness steel (max.): 6 mm, Refurbished machine HACO hydraulic guillotine shear, HSLX type, 3m x 6mm New SP9 control system Pneumatic sheet metal holding system 1.5 m squaring stop Rsdpfx Aezqa A Rjb Tecf New four-edged blades, stainless steel quality

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2004, working width: 2,500 mm, sheet thickness steel (max.): 6 mm, cutting length (max.): 2,500 mm, Refurbished machine HACO hydraulic guillotine shear, TS 2.5m x 6mm model New SP9 control system Redpszp U H Ujfx Ab Tjcf Retractable rear stop with 820mm stroke New, four-edged blades made of stainless steel

Condition: good (used), Year of construction: 2016, machine/vehicle number: 12300379, Offer 26209 Rcedpfx Abjzrk Rue Tsf Technical data: - max. working width 1020 mm - max. material thickness 2.5 mm - cutting angle 2.4 ° - stroke rate up to 34 1/min - manual rear stop with digital position display 500 mm - table height 850 mm - front angle stop - front extendable material support - pneumatically assisted sheet metal lifting with sheet metal discharge to the front - electric foot pedal - tapping – single stroke can be preselected - rear safety guard - mounted on a steel plate - pneumatic connection 6 bar - drive 400 V / 3 kW - space requirement approx. W 2100 x H 1150 x D 2200 mm - weight approx. 1400 kg

Condition: used, Sacma cutting and slitting line: •Manufacturer of the line: Sacma S.R.L., Italy, Vigevano (PV) •Year of manufacture: 1975 •Electrical power: Voltage 400 V ± 10% - 50 Hz frequency •Compressed air: Pressure min/max 4.5 - 6 bar Redszumm Dopfx Ab Tecf •Cycle time: Maximum unwinding speed is 12 m/min •Dimensions of the line: Length 23.5 m; width 4.8 m •Width of the coil: Min 300 mm / max 1280 mm (maximum coil weight 12 tons) •Length of the sheet: Min 450 mm / max 3000 mm •Material thickness: 0.4 - 1.0 mm

Condition: used, Year of construction: 2020, Attachment suited for: Construction machines Rjdszp U Skopfx Ab Tscf