Used Sealedair Vacuum Deep-Drawing Machine for sale (66,944)

Condition: used, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 16803, fuel type: electric, empty load weight: 750 kg, total length: 1,810 mm, construction height: 1,500 mm, drive type: Elektro, construction width: 1,225 mm, sweeping width: 1,000 mm, Sweeper-scrubber machine Chassis number: 16803 Condition: As new Technical condition: Very good Battery voltage: 24V Battery capacity: 240Ah Battery manufacturer: Hoppecke Aquamatic Dcedpfeyytixsx Ad Nog Battery type: PzS Battery year: 2024 Battery condition: 80 - 100% Description: 1,000 mm working width, 6,000 m²/h surface performance, 120 l container capacity, hydraulic high dump, round filter, automatic filter cleaning, 3.5 h battery runtime, right-hand side brush, gradeability 12%, working speed 6 km/h, suitable for indoor and outdoor use.

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm Dedpfx Adswi Tidj Nocg finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: M38L/9008, Offer Number: M38L/9008 Machinetype: pre-drawing machine Make: RMG Type: 910-2563-21 Constr. year: 2003 diameter range: 15,6 mm high-tensile: 14,1 mm Dcedpfx Adowxdk Dj Nsg capstan diameter: 900 mm drawing speed: 16 m/min output: 1500 kg Location: In our warehouse

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Constr. year: inlet wire diameter: 6,5 mm Dcedpfx Ajwi S Ixsd Nog finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: M38L/8943, Offer Number: M38L/8943 Machinetype: pre-drawing machine Info: only the draw drum Make: RMG Type: 67 Constr. year: 2020 diameter range: 11 mm capstan diameter: 700 mm clear width: 150 (160) mm Dcedswi Tdzopfx Ad Neg Location: In our warehouse

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: M38L/7658, Offer Number: M38L/7658 Machinetype: pre-drawing machine Make: RMG Type: 56-0776-85 Dedpfx Adewi S R To Nocg Constr. year: 1986 diameter range: 8 mm drawing speed: 19 m/min mild steel: 9,5 mm high tensile: 8 mm capstan diameter: 600 mm drawing power: 1400 kg Location: In our warehouse

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: M38L/9009, Offer Number: M38L/9009 Machinetype: pre-drawing machine Make: FASTENER ENGINEERS Type: DTVA 2050-36 Constr. year: 1997 diameter range: max 18 mm Dcjdpfxewxdkqs Ad Neg feeding speed: max 15 m/m capstan diameter: 900 mm output: 20 HP Location: In our warehouse

Condition: new, Sheet metal cutting moulds Sheet metal cutting moulds Sheet metal form moulds Hot brass forging Hot steel forging Cold steel forging Cold forged aluminium & steel Deep drawing moulds Automotive and spare parts white goods Product Info: Dcedpfx Asfuangod Nsg No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, drilling depth: 1,500 mm, feed length X-axis: 3,250 mm, feed length Y-axis: 1,500 mm, spindle speed (max.): 4,200 rpm, table load: 35,000 kg, CNC SELCA 4040 DH Maximum drilling depth in single cycle, V axis: 1,500 mm Column, longitudinal travel X axis: 3,250 mm Vertical travel Y axis: 1,500 mm Drilling slide, workpiece support movement W axis: 500 mm Maximum workpiece height: 2,400 mm Clamping table and workpiece approach movement U axis: 1,000 mm Controlled radial resolution, B axis: 360,000 divisions/rev Clamping table, rotating surface size: 1,600 x 1,800 mm Clamping table, max load with rotating workpiece: 20,000 kg Standard T-slot size: 22 mm Minimum–maximum solid drilling diameter: 5 – 50 mm Rapid feed rate, adjustable max speed: 8,000 mm/min Drilling spindle rotation speed, adjustable: 1 – 4,200 rpm Drilling spindle motor power: 15 kW Gun drill tool holders: Shank for drill Ø < 6 mm: Ø 10 x 40 mm Shank for drill 6 mm < Ø < 25 mm: Ø 25 x 70 mm Shank for drill Ø > 25 mm: Ø 40 x 70 mm Dimensions and weights Width x Length x Height MF 1500 BB: 5,900 x 7,600 x 3,850 mm Total weight: 42,000 kg Oil tank capacity: 600 – 1,200 liters WORK SLIDE TILTING Minimum / maximum vertical inclination – A axis: +20° / -20° Continuous controlled radial resolution: 0.001° MILLING HEAD – ISO 50 spindle connection Max horizontal working stroke – Z + W axes: 1,000 mm Column longitudinal travel – X axis: 3,250 mm Drilling slide vertical travel – Y axis: 1,500 mm Spindle rotation speed, adjustable max: 2,500 rpm Spindle power (S1 duty): 17 kW Maximum spindle torque: 680 Nm ROTO-TRANSLATING CLAMPING TABLE Max clamping surface: 2,000 x 2,000 mm Max horizontal travel – U axis: 1,000 mm Continuous controlled radial resolution: 0.001° Max rotating workpiece load: 35,000 kg Standard T-slot size: 22 mm Machine complete with: Dsdpfxjyymdij Ad Necg • Remote electronic handwheel • ISO 50 tool changer magazine with 10 positions • Many tools and working equipment • Rack with various drills • User manual, maintenance manual, and CE conformity declaration

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, film width: 1,340 mm, input frequency: 50 Hz, Skinpack packaging machine, manufactured to special order for maximum working space. Never connected to a production line; not used due to change in product range. Fully operational as shown in the video. Maximum film size: 1340 mm. Maximum working table size: 1300x1300 mm. Total power: 25 kW. Power supply: 3x400V 50 Hz. Weight: 600 kg. Djdpjyy Rl Defx Ad Necg Skin-pac skin skinpac

Condition: good (used), Vacuum packaging machine. Dodpfxewt Tmko Ad Njcg

Condition: used, Year of construction: 2019, Henkovac T4 – Professional Vacuum Packaging Machine (2019) Reliable vacuum performance with robust build quality for food‑industry environments. The Henkovac T4 is a compact yet powerful tabletop vacuum packaging machine engineered for professional food processors, restaurants, butcheries, and commercial kitchens. Featuring a high‑quality pump and intuitive controls, the T4 delivers consistent vacuum sealing performance for a wide range of products. Technical Specifications - Model: Henkovac T4 (Tabletop) - Year: 2019 (design generation from this period) - Vacuum Pump Capacity: 16 m³/h – reliable throughput for medium‑duty packaging operations - Chamber Dimensions: approx. 530 × 590 × 460 mm - Seal Bar Length: approx. 420 mm - Weight: ~55 kg - Standard Power: 220‑240 V, single phase, 50/60 Hz (other voltages on request) Key Features - High‑Quality Busch Vacuum Pump: Proven reliability and performance for continuous operation - Deep‑Drawn Stainless Steel Vacuum Chamber: Durable, easy‑to‑clean construction - Maintenance‑Friendly Design: Simple access and serviceability help reduce downtime - Cable‑Free Welding Bar: Clean sealing without clutter, enhancing hygiene and safety - Intuitive Control Panel: Digital time control with optional program upgrades Dcodpfxsyudtis Ad Njg - Optional Consumables Starter Kit: Includes Teflon tape and welding wire for immediate use Ideal For - Vacuum packaging of meats, cheeses, dry goods, and prepared foods - Retail food‑to‑go operations - Small to medium commercial kitchens - Product portioning and shelf‑life extension * Model: Henkovac T4 (Tabletop)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, drilling depth: 1,600 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 1,500 mm, overall weight: 50,000 kg, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, table length: 2,100 mm, table width: 1,900 mm, CNC Heidenhain iTNC 640 AXES OF MOVEMENT Maximum drilling depth in a single operation (V axis): mm 1,600 Table travel, horizontal movement (X axis): mm 3,000 Vertical movement (Y axis): mm 2,100 Column approach movement (milling) (Z axis): mm 1,500 Drilling slide tilting (resolution 0.001°) (A axis): +30° / -15° Table rotation (resolution 0.001°) (B axis): 360° Max axis feed rate: mm/min 10,000 DEEP HOLE DRILLING AND MILLING SPINDLE – ISO 50 Solid drilling capacity: mm 5 – 25 Maximum drilling diameter: mm 40 Adjustable spindle speed: rpm 1 – 4,500 Spindle power S1: kW 17 Spindle torque: Nm 324 Standard drilling tool holder: mm Ø 25 x 70 Maximum internal spindle pressure: bar 120 Taper type: ISO 50 DIN 69871/A Coolant system: Yes ROTARY TABLE Rotary table dimensions: mm 1,900 x 2,100 Table rotation (resolution 0.001°) (B axis): 360° Table load capacity in rotation: kg 20,000 T-slots: mm 22 OIL SYSTEM Hydraulic pump motor power: kW 4 – 7.5 Self-regulated oil pressure: bar 15 – 120 Self-regulated oil flow rate: l/min 5 – 80 Oil tank capacity: L 800 – 1,000 Cooled oil temperature: 25 – 32 °C Filtration grade: micron 16 MACHINE DIMENSIONS AND WEIGHT Width x Length x Height: mm 7,000 x 7,900 x4,700h Machine weight: kg 50,000 DRILLING CAPABILITIES WITH GUN DRILLS Maximum depth: mm 1,600 Maximum rotation speed: rpm 4,500 Minimum drilling diameter: mm 6 Maximum drilling diameter: mm 40 THREADING HEAD “IMSASISTEM” WORKING FEATURES Max rotation speed: rpm 4,500 Maximum threading on C40 steel: M36 Machine equipped with: Dcedoywnr Nspfx Ad Nsg • Remote electronic handwheel Heidenhain • ISO 50 tool changer magazine with 40 positions • Fume extraction system 4,000 m³/hour • Through-spindle air/oil system • M24 threads on table side • Various tools and equipment • Tool rack with assorted gun drills • User and maintenance manual and CE declaration of conformity

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Dcsdpfx Ajyupulsd Nsg Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: excellent (used), Year of construction: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm • Longitudinal travel (X-axis) table: 1800 mm • Cross travel (Z-axis) column: 1700 mm • Cross travel (W-axis) drilling head: 1150 mm • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping surface NC table: 1500 x 1000 mm • Maximum table load: 10 t • Rotary axis (B-axis) rotary table: 360° • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1-15 m/min (Y-axis: 1-10 m/min) • Rapid traverse speed in all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm • Tool holder: SK 40 • Tool clamping: OTT • Rated power main drive (100% ED, S1/40% ED, S6): 9/13 kW • Coolant tank capacity: 1000 l • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal coolant supply • Power supply: 3x 400 V; 50 Hz • Required installation space (L x W x H): 6550 x 5350 x 4130 mm • Machine weight: 12,000 kg Deep Hole Drilling Machine Equipment • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with minimal backlash, dimensions 1500 x 1000 mm • Swiveling drilling head +15°/-25° Dsdpfoxyf E Nsx Ad Nocg • Shank drilling head • Handwheel HR520 • Fixed supports (2 units) • Tool magazine: ELB tools: 12 pcs (max. diameter: 32 mm / max. length: 1550 mm) Standard tools: 12 pcs (max. diameter: 140 mm / max. length: 400 mm) • Direct measurement and positioning system in X, Y, and Z axes • Collision monitoring system for supports and drill sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for electrical cabinet • Enclosed upper cover (roof) • Drip tray for machine and tank facility (tray height 30 mm) • Extraction system • Infrared touch probe • Drilling depth extension 1200 mm (retrofit) • Chip conveyor

Condition: excellent (used), drilling depth: 10,000 mm, MGA (Romanian) Deep Hole Boring Machine Max Boring Dia: 187mm Max Boring Length: 10,000mm Chuck Diameter: 813mm Chuck Bore: 152mm Machine had a complete retrofit in 2007 to enable CNC or manual mode operation Controls: Bosh Rexroth Electric Drives Software Winstudio At the moment the machine is set to bore 3000mm length Has 5 other bed sections to increase this 12 Various Boring Tubes 30 Various Boring Heads 5 Supporting Steadies Dedeyk Tcfspfx Ad Njcg 2 Pressure Heads

Condition: used, URANIA DSK Maximum paper size: 80 × 112 cm Minimum paper size: 30 × 42 cm Dodpfsw R Eqbex Ad Njcg • Frame opening (normal): 78.5 × 108.5

Condition: used, functionality: fully functional, machine/vehicle number: 3081454316, This is a vacuum packaging machine from the manufacturer Komet, model PlusVac 20, tabletop unit. The vacuum machine is in very well-maintained condition. The unit has undergone a thorough inspection in our in-house workshop (motor flushing and new pump oil applied). The following parts have been replaced: counter pressure bar of the sealing beam, air separator, lid gasket, lifting cylinder, overhauled sealing beam, replacement of sealing wires, and renewal of Teflon tape. The device is fully functional. You will receive an invoice with VAT shown separately. This unit is made of stainless steel—robust and reliable. The machine is equipped with a plexiglass lid, electronic control, and vacuum stop button. It features a double-wire sealing bar with a sealing length of 405 mm. The maximum bag size is approx. 400 x 500 mm, and the chamber size is approx. 430 x 505 x 175 mm. Our used equipment service for you: - 6 months warranty on electrical parts, limited to replacement of defective components, excluding installation and removal costs - High-quality branded equipment at fair prices - Professional overhaul/inspection & expert cleaning - Tested & fully functional – or your money back - Flexible options for shipping or self-collection - Competent advice before and after purchase - Provision of user manuals, wiring diagrams & spare parts - DGUV V3 testing Technical Data: W x D x H: approx. 485 x 615 x 400 mm Electrical connection: V: 400 / kW: 1.078 / A: 3.487 / Hz: 50 Weight: approx. 62 kg Machine No.: 3081454316 Chamber size (W x L x H / mm): 430 x 505 x 175 Control: Standard Comfort, optional Perfect Sealing length (mm): 1 x 405 (2 x 405) Sealing bar length (mm): 420 Double sealing Distance x (y) (mm): 455 (400) Sealing bar position: Standard front, optional rear Pump capacity (cbm/h): 21 Power supply: 400V / 3Ph+N+PE / 50Hz Power rating (kW): 1.1 Max. bag size (mm): 400 x 500 Insert plates: 2 External dimensions (lid closed / W x D x H mm): 480 x 655 x 385 External dimensions (lid open / W x D x H mm): 480 x 655 x 920 Condition: Used, inspected, fully functional Shipping: Delivery or collection by arrangement Worldwide shipping on request Dedpfoxpxbpsx Ad Nscg Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have questions, need advice, or wish to view the machine on site? We are available by phone during our business hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is subject exclusively to our General Terms and Conditions (GTC).

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. We are official Makor dealer in Finland. Technical specs: Very little used vacuum extuding machine, year 2023. IN FEEDER FOR VACUUM mod. TEP 2000 reinforced version The in feeder, which is integral part of the vacuum coater, is equipped with high adherence belt and piece side guides. It is use to properly feed profiles in the vacuum head. TECHNICAL DATA TEP 2000 for vacuum Max. working width mm 220 Working height mm 850±30 Feed speed m/min 25÷150 Feed motor power (with inverter) kW 0,55 VACUUM EXTRUDING MACHINE mod. STORM WB Vacuum extruding machine for applying water base paints, designed in stainless steel plate (inox) and anti-adherence material. The machine is complete with a “cutting down” unit which allows a high reduction of the polluting emissions and a complete recovery of the excessive paint in order to reduce the consumption of paint to the minimum. PAINTING Extruding head realised in anti-adherence material. The head is complete with an adjustable profile guiding system, with paint adduction distributors. All the inner components are easily taken apart for a quick cleaning. A double diaphragm pneumatic pump with high capacity, transfers the paint from the tank to the extruding head, complete with a basket filter in stainless steel (inox) and an anti-pulse device for the interruption and feeding of the product. AUTOMATIC FILLING SYSTEM Automatic filling system for automatic decanting of the product directly from the paint drum to the tank of the machine. The system is also provided with an acoustic alarm in order to signal decrease of paint level inside the tank. Thanks to this system it is possible to maintain in circulation a minimum quantity of the product. CONTROL PANEL General electrical switch-board which is integral part of the aspiration tower equipped with control panel for the start-up and the control of the machine. Two vacuum indicating gauges for the control of vacuum degree and of loss of filter efficiency. TECHNICAL DATA STORM WB Compressed air consumption (~5 bar) nl/min 1500 Working height mm 870 +/-30 Turbines capacity (each) mc/h 470÷600 mbar 200÷250 Turbine motor power x 3 Kw 11 AUTOMATIC PRE-WASHING SYSTEM The automatic PRE-washing system allows a quicker product change or an easier maintenance of the machine. The cycle consists of the following phases: 1) Through a three-way valve the feeding pump sends the remaining product to an external container till the tank is completely empty. 2) Through hydric plant (at customer’s charge) the product tank is filled with water. 3) Turbines are activated while the previous three-way valve goes back to working position so that the feed pump can send in circulation the clean water for a defined time necessary for the washing. 4) The three-way valve goes back to discharge position and the tank is emptied by the washing water. Djdetqu Dijpfx Ad Njcg 5) The automatic filling system activates for the new product.

Condition: new, functionality: fully functional, Year of construction: 2026, fuel type: electric, drive type: Elektro, sweeping width: 1,100 mm, Sweeping and vacuuming machine Condition: New device Technical condition: New Battery voltage: 24V Battery capacity: 180Ah Dcedpfx Adjrqqv Hj Njg Battery type: Gel Battery year: 2024 Battery condition: 80 - 100% Description: New device with 12 months warranty

Condition: new, Year of construction: 2026, functionality: fully functional, fuel type: electric, drive type: Elektro, sweeping width: 1,100 mm, Sweeping and suction machine Condition: New unit Technical condition: New Battery voltage: 24V Battery type: Lithium-ion Battery year: 2024 Battery condition: 80 - 100% Description: New unit with 12-month warranty, water spray system for side brushes, warning beacon. Dedpjxmb Sljfx Ad Necg

Condition: new, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15VWL1032, The machine includes fixtures for the production of electrical couplings in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 Original MSA drawings are also included. The VWL 1200 is a CNC controlled vertical three-axis electric pipe laying machine designed for laying medium to large fittings or pipes. The machine can produce fittings typically in the 250 to 1400 mm internal diameter range (1400 mm SDR17). An optional 2-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling end holes during the external profiling cycle. The VWL 1200 uses special fixtures that clamp onto an innovative feature that is integral to the coupling design, so that there is a separate fusion zone in each half of the coupling. The process of laying the wire starts at one clamp at the end of the coupling. The wire is inserted with twice the required pitch at the end of the fusion zone, whereupon the tool system rotates and then moves in the opposite direction between the first laid pitch until it reaches the resting position at the second clamp. The process is completed at the second part of the coupling. Dcedpfx Asu Itk Red Nsg The VWL 1200 system is designed to allow the loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine has a completely open top, which allows easy loading overhead using a gantry system. Alternatively, parts can be loaded through the extra wide operator's door using suitable gripping and handling equipment.

Year of construction: 2018, condition: as good as new (ex-display), Number of spindles 1 full drilling 5-40 mm Drilling depth 1.000 mm Djdpjd S Ualefx Ad Nscg

Condition: excellent (used), Year of construction: 2018, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,800 mm, Table 1,500 x 1,500 mm X 2,000 mm Y 1,600 mm Dcodpfxjxyic Ss Ad Nog Z 1,800 mm B-axis, A-axis swiveling +/- 19 degrees Machine features full enclosure Chip conveyor and high-pressure coolant system Tool holder SK 50 Control Heidenhain iTNC 640 Table load capacity 20 tons Spindle speeds up to 4,000 rpm Rapid traverse 20 m/min Tool changer with 40 stations

Condition: excellent (used), Year of construction: 2001, drilling depth: 700 mm, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,600 mm, spindle speed (min.): 6,000 rpm, drill diameter: 40 mm, table length: 1,500 mm, table width: 1,250 mm, table load: 10,000 kg, Year of manufacture: 2001 Control: Heidenhain TNC 430 X: 1600 mm Y: 1200 mm Z: 1600 mm W: 500 mm Dcedpfsxu Dkgjx Ad Njg Table: 1500*1250 mm, 10T B-axis, A-axis swiveling +/- 19 degrees Machine features full enclosure Chip conveyor with coolant system Tool holder: SK50 Tool changer: 20 positions