Used Section Bending Rolls for sale (11,583)

Condition: used, Year of construction: 1986, sheet width 2040 mm plate thickness 4,0 mm distance between columns 2100 mm roll diameter 150 mm total power requirement 7,0 KW weight of the machine ca. 2,2 t dimensions of the machine ca. 2,95 x 1,0 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Rear roller electrically adjustable - Conical bending - Foot switch - Emergency stop device Guodpfx Ajy Ezzyslxsb

Condition: used, functionality: fully functional, machine/vehicle number: 3217, sheet thickness steel (max.): 50 mm, working width: 2,500 mm, Boldrini SIJ 2500x50 Three Roll Initial Pinch Plate Bending Machine 2,500mm x 50mm plate capacity Cardan shaft drive from gearbox Radio control console control of rolls and rolling speed Gsdpfjy Azgwex Alxeub

Condition: new, Shaft diameter: 120roll diameter: 390motor power: 15length: 2000width: 1650heigth: 1900weight approx.: 4450 Standard Equipment • Steel construction frame • 3 rolls powered by hydromotor and planetary gearbox • Horizontal and vertical working position • Mobile control panel • Hardened standard rolls • Hardened and ground shafts made of high-tensile special steel • Digital read-outs (2 pcs) • 3-axis hydraulic lateral angle guide rolls • Two-speed working system Godpfjy Hymqox Alxsub • Hydraulic elements: Duplomatic (Italy) components used • Electrical equipment: Siemens (Germany) or Telemecanique (France) • Built according to EC safety directives (CE mark) and ISO 9000 certificate • User’s manual in English Options: - NC Unit 7 Screen EURO 7.500,-- Capacity Chart: NoProfile TypeSize Max Min. es1125x25 1200 Standard Rolls2200x50 1000 Standard Rolls365x65 750 Standard Rolls4Ø80 850 Optional Rolls5Ø5”x6,35 1500 Optional Rolls6Ø160x4 2800 Optional Rolls7120x40x4 1800 Optional Rolls890x5 1800 Optional Rolls9120x120x12 1200 Optional Rolls 10100x100x10 1200 Optional Rolls 11100x11 800 Standard Rolls12100x11 1000 Standard Rolls13100x11 800 Optional Rolls14UPN 220 1000Standard Rolls*15UPN 220 1200 Standard Rolls*16IPN 220 1000 Standard Rolls *17HEB 120HEA 14012001200Standard Rolls *18UPN 120 10000 Optional Rolls 19IPN 160 5000 Optional Rolls 20HEB 100HEA 12016004000Optional Rolls

Condition: used, Year of construction: 2002, sheet thickness: 8sheet length: 2000prebending: 6Upper Roll Diameter: 205Side Roll: 185messurements (LxWxH): 3850 x 1550 x 1420Standard Accessories Steel construction The adjustment of the rolls is made by hydraulic cylinders The rotation of the rolls is driven by individual hydraulic motors and planetary gears Pressure limit valves protect the machine against overloading Guedpfx Aey Hymwolxob Pre-bending can be adjusted according to the operator’s selection and increases productivity Electrical control panel Portable control panel Conical bending system 2 pcs. digital readout for movement of both side rolls

Condition: refurbished (used), functionality: fully functional, overall weight: 540 kg, total length: 905 mm, total width: 950 mm, total height: 1,125 mm, Year of construction: 2013, operating hours: 50 h, input frequency: 50 Hz, shaft diameter: 40 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, Profile Bending Machine ARKUS12 Tablet350 (refurbished) For sale is a profile bending machine ARKUS12 with Tablet350 control system, year of manufacture 2013. The machine was completely refurbished in 2026 and technically upgraded to the new Tablet350 control system. With only approximately 50 operating hours since the overhaul, the machine is in an excellent, nearly new condition and is available immediately. Technical Data: Machine type: Profile Bending Machine Gedpjy Exdfofx Alxjub Manufacturer / Model: ARKUS12 Control system: Tablet350 (2026 upgrade) Year of manufacture: 2013 Operating hours: approx. 50 hrs Condition: As-new, fully refurbished and upgraded Warranty: 2-year warranty on electronics Availability: Immediate Further technical details and specifications as per manufacturer can be found at pbt-ag.com. Note: The sale is made under exclusion of liability for material defects, except for the stated warranty.

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 2050 mm plate thickness 4.5 mm 4.0 mm roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Special price on request Features: - Robust electromechanical bending machine Gedoxaawgjpfx Alxoub - 2 central rollers driven by electric motors (top & bottom rollers) - Top roller manually swivels out, with hinged bearing - Includes tapered bending attachment - Freely movable control panel - Bottom roller manually adjustable via handwheel - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety tether with switch unit) - CE marking/Declaration of Conformity Optional equipment included in the price: - Hardened rollers - Motorized side roller adjustment - Digital position display for motorized adjustable side roller

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC Guodpfx Ajxacdvelxeb - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: new, Cesurbend 3-roll round bending machine MRS 1250 x 140 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment digital display sheet width 1250 mm sheet thickness 5,5 mm max. sheet thickness 5,0 mm bending roll length 1250 mm roll diameter 140 mm weight 1150 kg dimension L-W-H 2020 x 900 x 1200 mm motor: 2.2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out Gsdpfx Alsh Timpoxsub conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line CE mark

Condition: used, Year of construction: 2021, gebraucht 2021 9502 Türkei 2100 € 1 1050 mm 2 mm 75 mm 1930 mm 700 mm 1160 mm 300 kg MINT CONDITION Gedpowiquqofx Alxeub 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 20000 € 384 € 1270 mm 5 mm 5 mm 4 mm 5 mm 4 mm 4 mm 3 mm 130 mm 130 mm 130 mm 5 m/min 3020 mm 1150 mm 1110 mm 2150 kg motorized roller drive Gjdpfxoyb Sz Uj Alxeub upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT: overhead crane side supports NC control variable speed

Condition: used, Year of construction: 2017, 2017 MG4 R2014 R Hydraulic Bending Rolls Gsdpfxjy Dr Nrj Alxjub Working Length: 2,050 mm. Roll Dimensions: Upper 220 mm | Middle 200 mm | Lower 170 mm. Rolling/Bending Capacity: 14 mm / 10 mm. Machine Weight: 3,200 kg. Motor Power: 5.5 kW. Overall Dimensions (L × W × H): 3.8 × 1.6 × 1.5 m Arm Dimensions (L × W × H): 3.0 × 0.6 × 3.0 m. S/No.17104 (2017)

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4600 € 1050 mm 2 mm 75 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): Godey Dvlkspfx Alxoub hardened rolls

Condition: new, bending length: 3100sheet thickness: 8upper roll diameter: 230 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: variable rotation speed EURO 4.682.00 Material feed table on request Gujdpfx Aled Ab Tgsxob Oil cooler EURO 1,040.00 Center support EURO 8.250.00 Side supports EURO 7.070.00 We have many references!

Condition: like new (used), Year of construction: 2020, Technical data: Gujdsyzc Iaopfx Alxeb Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Hardened rolls Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 2.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very good, almost as-new condition, very little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. Gujdpfxsh U Rzgo Alxsb MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: new, sheet length: 2600sheet thickness: 6upper roll diameter: 190Side Roll: 170prebending: 4motor: 3messurements (LxWxH): 4450 x 1080 x 1160weight approx.: 3350 Technical specifications: - Hardened and polished rolls Gedpfx Alsd Ab Tnoxeub - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- We have many references!

Condition: new, bending length: 4100sheet thickness: 9upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 10.250,00 Guodjd Ab S Hjpfx Alxsb We have many references!

Condition: new, Shaft diameter: 180Upper Roll Diameter: 60Bottom Roll Diameter: 50working speed: 5motor power: 3length: 1200width: 850heigth: 1200weight approx.: 1000 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 7 Screen EURO 9.000,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6 Gedpfx Aed Ab H Nslxsub         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, sheet thickness: 10bending length: 3100upper roll diameter: 270messurements (LxWxH): 5600 x 1450 x 1600prebending: 8motor: 11Bottom Roll Diameter: 250Side Roll: 210 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Gjdpfjd Ab R Sex Alxoub Options: DescriptionQtyNet Price (¤)Heating + Cooling11.477 ¤Variable Speed Rotation13.323 ¤Material Feeding Table 1000 × 2000 – 1 pcs12.414 ¤Central Support15.857 ¤Central Support Preparation1888 ¤Side Supports Left and Right15.020 ¤Side Support Preparation vs Standard1923 ¤Control System CNC-CS618.200 ¤Control System NC-CS617.721 ¤Ejector System113.020 ¤ We have many references!

Year of construction: 2021, condition: new, New high quality ISITAN IRM 1550 x 140 Plate Bending Machine – powered sheet metal bending rolls 3 Rolls – other sizes and capacities in stock STANDARD FEATURES & SPECIFICATIONS Easy operation with mobile control panel with push buttons Conical bending device Very suitable for light and medium plates, aluminium or stainless steel Built according to EC Safety Directives and has CE Mark Manual Drop-End for easy removal of finished ferrule Hot rolled SAE 1050 (CK 45) Steel Rolls Main motor with Brake System Precision Bending with Brake Motor SAE 1050 Quality Certificated Steel Rolls with high tensile strength Two rolls powered by a single gearbox and gear system for top and bottom rolls Spheroid Cast Iron Main Frames Wire grooves at the end of the rolls Precision Bending with Brake Motor Model IRM 2550×140 produced standard with motorised back roll Specification on these 1550mm x 4mm powered bending rolls in the chart below: MODEL Usefull length mm Bending capacity mm Roll diameters Ø mm Roll speed m / min. (dk.) Motor power Gusdpfx Alshpchysxjb kw Wire grooves dia. mm Length mm Width mm Height mm Weight kg IRM 1050 x 110 1050 4 110 3 2.2 4 / 7 / 9 / 13 2200 750 1000 990 IRM 1050 x 130 1050 5 130 3.5 2.2 4 / 7 / 9 / 13 2200 750 1000 1200 IRM 1270 x 120 1270 4 120 3 2.2 4 / 7 / 9 / 13 2470 750 1000 1115 IRM 1270 x 140 1270 5 140 3.5 2.2 4 / 7 / 9 / 13 2470 750 1000 1350 IRM 1550 x 110 1550 3 110 3 2.2 4 / 7 / 9 / 13 2700 750 1000 1200 IRM 1550 x 140 1550 4 140 3.5 2.2 4 / 7 / 9 / 13 2700 750 1000 1420

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 90 mm, roller (top) diameter: 90 mm, roller length: 1,100 mm, working width: 1,030 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 2 mm, overall weight: 440 kg, total length: 1,750 mm, total width: 650 mm, total height: 1,100 mm, power: 1.5 kW (2.04 HP), input voltage: 400 V, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, 3 rolls plate bending machine DURMA MRB 1030/3mm rolling machine for sale in excellent condition. manufacturer: Durma MRB-E 1003 year of manufacture 2010 number of rollers 3 upper roller diameter Ø: 90 mm roll length: 1030 mm high tensile steel rollers with SAE 1050 quality certificate - Wire grooves at the ends of the rollers (4/6/9) mm CE certification Cone rolling Guedpfsyzrcgox Alxjb Upper roller can be opened Manually adjusted rear and lower roller Operation: Foot pedal Motor power: 1.5kw braked gear motor Electrical connection 400 V Cast iron frame construction Machine weight: 440 kg length: 1750 mm width: 650 mm height: 1100 mm

Condition: excellent (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, electrically driven -Bending adjustment: electric Guodpfx Alsywzlpoxob -Max. sheet width: 2040 mm -Max. sheet thickness: 4 mm -Roller diameter: 150 mm -Dimensions: 1080/2880/H1370 mm -Weight: 1770 kg

Condition: used, 3-roll plate bending machine Manufacturer: Luna Model: 8266 20/25 Machine No.: 2202 Working range: 2000 x 2.5 mm sheet thickness Swing-out top roll Guedpfx Asyw S N Selxob Power supply: 3-phase, 16 amps

Year of construction: 1996, condition: as good as new (ex-display), machine/vehicle number: 910/96/221, working width: 1030 mm metal sheet thickness: 1 mm upper roller-Ø: 60 mm below roller-Ø: 60 mm Gedpobpytpefx Alxjub weight: 170 kg space needed: 560 x 1570 x 1080 mm

Condition: used, working width: 1020 mm metal sheet thickness: 1 mm upper roller-Ø: 55 mm below roller-Ø: 55 mm space needed: 1370 x 570 x 1100 mm Gjdpfx Aleda I Itsxoub