Used Seitz - Werke Gmbh Combi Filter As Frame Filter for sale (78,761)

Year of construction: 2016, condition: excellent (used), machine/vehicle number: 216 105, BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 Bdjdpfx Adshqmghj Aob ISO class F, B3, KKL

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16501575, volume flow: 4,800 m³/h, input voltage: 380 V, power: 2.5 kW (3.40 HP), Equipment: type plate available, The resulting dirt particles, emulsion and oil mist, as well as smoke, are captured directly at the source and passed through the individual filtration stages. The separated liquid collects at the bottom of the unit and can be returned to the machining center via the siphon. In the first filtration stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filtration stage removes the majority of fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the degree of contamination. The third filtration stage consists of a large-area HEPA filter of class H13. A consistently high filtration efficiency of 99.95% at a particle size from 0.3μ DOP is ensured here. Type testing in accordance with DIN EN 1822-1 H13 allows the filtered air to be returned to the workspace. Bodpfoyz Sn Nex Ad Aodb

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Bdodperunu Iefx Ad Asb

Condition: ready for operation (used), A Seitz filter machine including a Schenk dosing device for beer production is available. 1) Kieselguhr frame filter Seitz Orion 60, max. throughput capacity: 70hl-80hl/h, effective throughput capacity: approx. 45hl/h, max. total filtration capacity: approx. 600hl, pressing device: 2-stage planetary gear, number of plates: 36, number of end plates: 2, plate dimensions X/Y: 600mm/600mm, pipe diameter: 50mm, nominal width: NW50, machine dimensions X/Y/Z: approx. 3800mm/1100mm/1400mm. 2) Dosing device Schenk DO-S120, year of construction: 1971, capacity: approx. 160l/h, high-speed capacity: approx. 320l/h, nominal width: NW50, pipe diameter: 50mm. Documentation available. On-site inspection is possible. Bsdowd Talspfx Ad Ajdb

Condition: good (used), Year of construction: 1997, The photo shows a Fanuc Series 0-M (a popular CNC controller used in the 1980s/90s). It supports X, Y, Z axis interpolation and a tool magazine. Features include a CRT screen and a classic push-button keyboard. 3. Electrical parameters (nameplate) Power supply: 3-phase, 380 V, 50 Hz Control voltage: (not specified, but typically Fanuc 110/220 V → transformer) Auxiliary voltage: 24 V Protection: 16 A (flink) Electrical diagram number: 711 792 01 01 4. Machine construction Vertical CNC machining center (milling machine) with a fully enclosed housing. Worktable with grid of holes for mounting workpieces. Carousel tool magazine (visible in the photo) – most often 12, 20, or 24 tools (depending on version). Automatic tool changer (ATC). Z-axis operates vertically (guideway assembly and telescopic way covers visible). 5. Typical technical data (for Chiron FZ 12/15 machines from this period) (values may differ depending on the model, but these are approximate parameters): Travels (X/Y/Z): approx. 500 – 700 / 400 / 400 mm Table surface: 800 × 400 mm (example) Table load: 200 – 300 kg Spindle speed: 20 – 6000 rpm (some versions up to 8000 rpm) Spindle taper: SK 40 (DIN 69871) Spindle drive: 7.5 – 15 kW (depending on version) Tool magazine: 12 – 24 tools Positioning accuracy: ±0.005 mm Rapid traverse: 30 m/min (X/Y/Z axes) 6. Application Metalworking (steel, aluminum, cast iron, light alloys). 📌 General information: • Manufacturer: CHIRON, Germany • Type: CNC machining center • Control: as seen in the photo (Fanuc Series 0-M) • Automatic tool changer • Heavy-duty worktable with workpiece clamping options • Solid industrial construction 📌 Machine condition: • Used machine, in good condition • Regularly serviced • Shows normal signs of use • Fully functional 📌 Application: • High-precision milling Bdodow Uab Ajpfx Ad Ajb • Machining of metal components • Single-part and batch production

Condition: used, Year of construction: 1991, Name: Used Filter Press Frame Manufacturer: Passavant Type: 1200 x 1200 mm Year built: 1991 Construction form: Bridge beam press Filter pressure: 15 bar Bdjdpfxew Aw Rls Ad Asb Press content: Possible approx. 2200 liters m2 Cycle: Closed Filter area: Possible approx. 160 m2 Plate size: For 1200 x 1200 mm Number plates: Without plates, 66 plates fit with a cake thickness of 30mm Plate transport: Automatic Filter cloth washer: Yes Cake thickness: 30 Possible Dimensions: L 6.700 x W 1.800 (2.400) x H 2.250 + 500 mm Empty weight: Approx. 14000 kg Technical doc.: Yes Message: Without plates but with 66 carriages for hanging the filter plates Accessories: A light curtain, a filter cloth washing system Condition: Second hand Price: On demand

Condition: used, Year of construction: 1982, 1 Combi-Filter Seitz, type Orion 100 Year of construction: 1982 Output: 100 hl/h complete with beer pump, conductivity measurement, dosing vessel, Control cabinet, switching panel, KG collecting pan with conveyor and disposal pump. Filterarea kieselguhr appr.: 35 m² Filtration capacity: 100 hl/h Length: 5200 mm Bdodsxbpayspfx Ad Aob Width: 1320 mm Height: 2250 mm Formats: 1 m x 1 m filter plates Material: Stainless steel Position: Horizontal Base construction: Frame filter Features: Hydraulic filter compression; altguhr conveyer: up to 200 Filter sheets or 55 kieselguhr plates and 56 filter sheets

Condition: good (used), functionality: fully functional, maximum load weight: 2,700 kg, permissible axle load (axle 1): 1,350 kg, permissible axle load (axle 2): 1,350 kg, trailer brake: trailer braked, Dimensions: approx. 420 x 180 x 220 cm Bedpfeyvy Aqex Ad Asdb Overall length: 570 cm The trailer is immediately ready for use and runs smoothly and reliably. Technical specifications: • Manufacturer: Böckmann Fahrzeugwerke GmbH • Model: CHF 613/20 • Gross weight: 2,700 kg • Axles: 2 × 1,350 kg (tandem axle) • Braking system: overrun brake (Knott KFZ 27) • Plug: 13-pin • Jockey wheel: present, fully functional Features & Highlights: • Sturdy tarpaulin body – weatherproof, good condition • Extremely robust Böckmann heavy-duty construction • Tandem axle = smooth and safe ride • Numerous lashing points • Ready for immediate use Condition: The trailer is used but technically reliable. Tarpaulin is clean and tight, electrics fully functional, chassis solid. Normal signs of use on metal parts (see photos).

Year of construction: 1979, condition: used, Centrifugal high-performance kieselguhr filter with buffer tank, kieselguhr dosing vessel and peristaltic pump. Additional title: Kieselguhr filter Capacity approx.: 110 hl/h Vessel volume: 1550 l Operating pressure: 9 bar Operating temperature: 100 °C Operation / Control: Control cabinet with operating buttons Bodpfevcqmbex Ad Aodb Material: Stainless steel Features: Kieselguhr dosing vessel, 14,26hl; hose pump Periphery: buffer tank, vessel

Year of construction: 1975, condition: used, Filter system constructed with horizontally stacked filter elements. Once filtration is completed the kieselguhr is expelled from the vessel by centrifugal force. Capacity: 140 hl/h Vessel volume: 26 hl Length: approx. 4000 mm Width: approx. 2000 mm Height: approx. 3500 mm Material: Stainless steel1.4541 (vessel) Bdodpsvcqpcsfx Ad Asb Base construction: on feet Features: Kieselguhr dosing vessel with dosing pump; pumps; fittings, measurement technology

Condition: used, Oil Mist Extractor, Emulsion Mist Separator, Used Machine Manufacturer: IFS Industriefilter Service GmbH Type: IFM 2000 Overall dimensions: Bdsdpfxoyn Rmio Ad Asb Width: 1170 mm Depth: 700 mm Height: 1100 mm Weight: 136.5 kg Year of manufacture: 1995 Electrical data: 400V, 1.5 kW, 3.2 A Filter size: 605 x 615 mm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, volume flow: 3,000 m³/h, total width: 2,200 mm, total length: 10,600 mm, total height: 2,350 mm, Biofilter System for Odor Reduction – bioteg MCBF 3000 QSW For sale is a bioteg MCBF 3000 QSW biofilter system designed for exhaust air purification and odor reduction, suitable for an airflow rate of up to 3,000 m³/h. The system was decommissioned due to regulatory requirements, is technically complete, and was engineered for fully automatic, continuous outdoor operation. The installation comprises a double-walled biofilter container (outer shell made of steel, inner lining PE-HD), a pre-connected air humidifier (cross-flow scrubber), a radial fan with frequency converter, as well as a separate technical compartment with control cabinet. The filter bed is filled with approximately 30 m³ of durable, longitudinally-shredded root wood, offering high shape stability and low compaction. The biofilter system complies with VDI guideline 3477 and ATV leaflet 204 and achieves high purification performance (including up to 97% odor reduction, 98% H₂S, and 97% NH₃ at design conditions). Maintenance requirements are low (regular visual inspections, annual servicing). Typical areas of application: Waste treatment facilities, composting plants, wastewater treatment plants, industrial exhaust air purification, municipal waste management operations. Further technical documentation, dimensions, performance data, and viewings available on request. Bdsdpeyhwacsfx Ad Ajb

Condition: like new (used), functionality: fully functional, Year of construction: 1986, machine/vehicle number: 1519 - 5016GW, Equipment: CE marking, The conditions are mint! Fully refurbished and upgraded the complete filter in 2017. Including haze and color control from Optek and new dosing pump, all process connections GEA Varivent, Profibus interface, including the heat exchanger and pipe panels and so on. There isn+t a single old pipeline on it! Last 5 years the filter was running really low and was cleaned more than running production. Bdjdpfx Adsw Ic A Ne Asb Last operational 12.2024

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 460,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Bdedpfoq Nmw Iox Ad Aob

Condition: used, Kerzenfilter für 3 Filterkerzen mit 20" länge. Bdedpexytynefx Ad Aob

Condition: good (used), Year of construction: 1988, machine/vehicle number: 40 / 670, functionality: unexamined, -KOM 853- Offered here is a Unifil air purifier from ILT Industrie-Luftfiltertechnik GmbH. This unit is in used condition and has not been tested for functionality. Manufacturer: ILT Industrie Luftfiltertechnik GmbH Model: U40 Serial No.: 40 / 670 Year of manufacture: 1988 Voltage: 80 V Current: 3.3 A Frequency: 50 Hz Bjdpjw Ehzyefx Ad Aedb

Condition: good (used), For sale is a directional jet agitator from Stelzer Rührwerke International GmbH. It is the model SM460-DF. Product data: 1455 R.p.m. 400V 18,5 kW Shaft length 720mm Blade diameter 280mm For further data see type plate (photo) Bdedpfx Adefr Icuo Aob

Year of construction: 1985, condition: used, Sheet filter with square filter elements hanging vertically, arranged row. Hydraulic filter sheet press. Control of the hydraulics from the built-in electrical control panel. Additional title: Sterilisation filter Operating pressure: 8 bar Number of plates: 100 pcs Plate area: 1 m2 Bsdpjw Tmtiofx Ad Aodb Length: 5,5 m Width: 1,5 m Height: 2,3 m Operation / Control: Control cabinet with operating buttons Material: Stainless steel Base construction: Frame Features: Hydraulic press; control panel

Condition: used, Year of construction: 1974, Combination Kieselguhr and Sheet filter. Stationary sheet filter with square filter elements in vertical row arrangement. Capacity: 60 hl/h No. of plates - KG Filter: 34 Plates No. of frames - KG Filter: 35 filter frames No. of plates - sheet filter: 150 Plates Length: 6500 mm Width: 1000 mm Height: 1500 mm Formats: Quadratic filter elements - 60 cm x 60 cm Base construction: Frame Bdedpfx Adoxbpdls Asb Features: Manual filter element compression Periphery: Kieselguhr dosing unit with dosing pump Layer patterns: Vertical filter elements in a row

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, WE Flexmaster 400 laser welding machine Year of manufacture: 2010 Laser unit TruDisk 3302, Trumpf company Bjdpsv Ipcfofx Ad Ajdb Cooling unit P805-17640, Termotek company Material: black sheet metal and stainless steel sheet Sheet thickness: 0.6 - 2.0 mm Pipe diameter: 80 - 600 mm Pipe length: 100 - 1250 mm

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. Bjdpeng Exajfx Ad Aedb The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. Bsdpfx Aeyxccrsd Aodb With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2025, condition: new, Universal Testing Machine PM50 Force: 50 kN Crosshead Travel: 1200 mm Test Area: 400 mm Overall Height: 1817 mm Weight: approx. 380 kg Resolution (Travel): 0.01 mm Test Speed: 0.03 - 1000 mm/min Return Speed: 1000 mm/min Load Cell: 50 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, which means that a "quick test" can be performed even without a PC. For tests requiring data storage and curve recording, our basic software enables you to control the machine and evaluate results. The software allows you to generate different test sequences and create test reports. Furthermore, you can export raw data for further processing in your own programs. Bjdpsydazuefx Ad Asdb Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips/accessories: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2025, condition: new, Universal testing machine PM50 Force: 50 kN cross beam stroke: 1200 mm Installation space: 400 mm Overall height: 1817 mm Weight: ca.380 Kg Travel resolution: 0.01 mm Testing speed: 0.03-1000 mm / min Return speed: 1000 mm / min Force transducer: 50 kN Bsdpsd R Dp Eefx Ad Aedb incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: excellent (used), Year of construction: 2006, Carl Zeiss Contura G2 7/10/6 VAST XT Gold Technical data: Measuring range: X=700mm, Y=1000mm, Z=600mm Controller: C99 with BP26_SE control panel Last calibration: 05/2025 Retrofit Equipment: 8-fold MSR probe changer system Probe changer rack Probe accessories Calibration sphere Bedpoy Ia Taofx Ad Aedb HP Z4 WIN11 workstation with monitor Calypso software Options: Planner, IGES in/out additional accessories