Used Strautmann Siloblitz 260 Kd for sale (3,419)

Condition: used, Year of construction: 2026, Demonstration forage wagon approx. 112 loads - 37 knives - Tandem bogie axle with steered trailing axle, 16 t axle load,   40 and 60 km/h, track width 2,100 mm, wheelbase 1,320 mm, brake 400x120 Psdpfx Aj Affd Tei Tsrc - Tires 4x 710/40 R 22.5 161D 10-hole, BKT FL 630 Ultra - Spacer ring for tires 710/40 R 22.5 - 2-line pneumatic brake with ALB for 16 t axle - Direction of travel detection for steered trailing axle - Drawbar with lower hitch and ball coupling, 3 t vertical load - Conveyor floor advance with 2-stage hydraulic motor - Operation via ISOBUS Basic with steered trailing axle - ISOBUS control terminal 5" - Silage body - Hydraulic couplings with load-sensing connection size 2 and 4 - Flex-Load pick-up - Additional idler roller behind the pick-up - PTO shaft with overrunning clutch 1650 Nm on one side   Wide angle 1 3/8" Walterscheid - Automatic loading with ISOBUS - 2nd work light LED rear left on fender

Condition: used, Year of construction: 2005, - 12 cubic meters - 2 augers - Sliding gate at the front left and front right - PTM weighing system - On-board computer - PTO (power take-off) - Control panel Predpfxsz Na T Ds Ai Tsc - PTO shaft

Condition: good (used), Year of construction: 2021, functionality: fully functional, pressing force: 58 t, Very good condition, fully functional, low operating hours, year of manufacture 2021, pressing force 58 tons. New price: seen for €19,500 Pjdjyzw U Uopfx Ai Terc Pressure cylinder has been dismantled for transport, inspection possible by appointment. Further presses in stock.

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2026, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of statutory value-added tax, ex works and without packaging. The press has been cleaned, functionally tested, repaired and equipped with a new control system in accordance with EN16500. All replacement parts used are original parts from Strautmann. Technical details: Manufacturer: Strautmann Umwelttechnik Type: PP 1207 Bale dimensions (L x W x H): 1180 x 700 x 800 mm External dimensions (L x W x H): 1838 x 1059 x 2871 mm Transport height: 2050 mm Feed opening: 1190 x 600 mm Pressing force: 59 tons / 580 kN Throughput: 1 - 2 bales / hour Number of belt channels: 4 Binding material: Wire Weight of the press: 2,300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: indoors / outdoors, covered Includes starter kit for bale strapping, 19mm Serial number: 610.00.184 Year of manufacture: 2003 Prjdpfx Aiov Rzwme Tec

Condition: used, Year of construction: 2017, Mechanical scraper, hydraulic lifting frame. The sale is made with the exclusion of any warranty. Psdez Saafspfx Ai Terc

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,828 h, functionality: fully functional, machine/vehicle number: 61700170, total width: 2,300 mm, total height: 3,300 mm, total length: 9,200 mm, overall weight: 10,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General information Year of manufacture: 2016 Operating hours: 1,828 h Serial number: 61700170 Color: Blue Prodpfx Aoz Ea Rbsi Toc CE certificate available: No Documentation available: No MACHINE DETAILS Dimensions and weight Overall length: 9,200 mm Overall width: 2,300 mm Overall height: 3,300 mm Unladen weight: 10,000 kg Transport data Transport dimensions: 9,200 × 2,300 × 3,300 mm (L × W × H) Transport weight: 10,000 kg Transport packages: 3 pcs.

Condition: new, Year of construction: 2023, Demonstration machine – used only twice. Podpfs Afgcksx Ai Tsrc Trailing axle with direction detection. Flex-Load pickup. Wide-angle driveshaft. 2nd LED work light. Front grill, hydraulically foldable.

Condition: used, Year of construction: 2018, Tires: 620/40 R22.5, PTO shaft, K80 lower linkage, air brake system, load sensing, articulated drawbar, 40 km/h, 3 metering rollers, trailing axle, ISOBUS control system including terminal, cutting rotor with 37 knives, automatic foreign object protection, Flex-Load pickup, roller presser, loading area lighting, access hatch. Pjdpfsz Sazisx Ai Torc

Condition: used, Year of construction: 2012, tire size: 435/50 R19.5, - Front conveyor belt - Single axle, air brake, 25 km/h - Set of blades for straw Podpez Nbbcsfx Ai Tsrc - Electro-hydraulic control, 2 functions - Single-sided universal joint propeller shaft - Overflow ring, external - Electronic controller for conveyor belt

Condition: used, Year of construction: 2004, Year of manufacture: 2004 Very well maintained, no use in chopping applications. Pick-up: 1.80 m, 5 tine bars Deflector plate with 2 chains Feed system: hydraulic motor, 2-stage Tire: 500/55-20, 12PR, 10L, ET 0, flotation DL 33 K, articulated drawbar, hydraulic Brakes: pneumatic, with and without steering, 15t, 40 km/h, with ALB 1 cutting frame with silage cutting unit Cutting unit knives Body Additional body support in the middle Metering unit: 2 rollers Electro-hydraulic system - basic equipment PTO shaft, wide-angle, 2 WW, cam-actuated clutch Lighting Automatic grease lubrication for the feed system and pick-up Psdpfszdmuyox Ai Tjrc Instead of a cover at the front: automatic loading system Individual operating permit for 40 km/h Loading area lighting on the front panel Axle track: 2.03 m, for a wheel outer width of 2.53 m Price: 19,900.00 Euro net Location: null

Condition: used, Year of construction: 2012, functionality: fully functional, Strautmann baling press, type BaleTainer, pressing force 60 t, year of manufacture 2012 Technical data: Manufacturer: Strautmann Umwelttechnik Type: BaleTainer Year of manufacture: 2012 Pressing force 60 t Total connection power 30 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 straps Bale weight up to 400 kg (3 straps) Predpfxsz A T U Uj Ai Toc Binding: 4-way vertical Dimensions: 5,348 x 2,113 x 2,752 mm (L x W x H) Weight approx. 7,280 kg Materials: Paper, cardboard, PET bottles, film Note: The press is in good working order and has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, Year of construction: 2021, Tires: 800/45 R26.5, PTO shaft, K80 lower linkage, air brake system, ISOBUS control, articulated drawbar, hydraulic front wall, roller press, Flex Load pickup, cutting rotor with 48 knives, hydraulic suspension, steering axle, 3 metering rollers, hydraulic load space cover. Podpfxjz Sck Hj Ai Tjrc

Condition: new, Year of construction: 2020, 1 used short-cut forage wagon STRAUTMANN Giga-Vitesse CFS 4002 Demonstration machine Identification number: 435574 Serial number: W097505L0S38027 Year of manufacture/registration: 2020 Dimensions: Width 2.55m; Height 4.00m; Length 10.22m. Weight: 8850 kg Permissible total weight with lower hitch: 22,000 kg Power requirement from 118kW/160HP Type of conveying unit: Rotor Number of knives [pieces]: 44 Pick-up width 2.25m 40km/h Prsds Af S Rzspfx Ai Tjc Hydr. tandem axle with trailing steering Wheelbase 1820mm, track 2100mm Brake 410x180, 20t axle load 2-line pneumatic brake with ALB for hydraulic tandem axle Direction detection for trailing steering Without suspension for hydr. tandem axle Drawbar with lower hitch with ball coupling, 4t support load Operation via ISOBUS with Field-Operator 1 Hydraulics complete for trailing steering Hydraulic couplings with load-sensing connection Deflector plate on the upper part of the front grate Cardan shaft with cam-actuated coupling Lighting LED Outline lighting Upper part of front grate hydraulically foldable via direct connection to the tractor Additional wheels behind pick-up Number of loads hauled: 962 Location: D-91575 Windsbach Further information from Wolfgang Friederich Tel:

Year of construction: 2023, operating hours: 400 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 10948/11/23, For sale is a like-new MHG rotary table blasting system – an injector sandblasting system, type SMG 260 DTTA, for blasting components on a rotary table. The system was manufactured in 2022 and has only approximately 400 operating hours. Blasting was carried out exclusively with glass beads, resulting in minimal wear and tear, leaving the system in almost new condition. The blasting system has 3 blasting stations with a total of 8 automatic blasting nozzles. The injector blasting nozzles are flexibly lockable and adjustable, allowing them to be precisely aligned with different components (max. component height 350 mm). Loading is done via 2 airlocks with an automatic compressed air blow-off device. A side viewing window with an impact protection flap, 2 side doors, a safety light curtain, and a release mechanism ensure control and safety. The abrasive material storage container is equipped with a level indicator (MIN). The system is controlled via a Siemens SIMATIC HMI control system with a KTP700 display. A 30 m³ dust collector ensures the necessary vacuum and room air extraction; the system's power consumption is 6 kW. The system has already been partially disassembled and is ready for pickup. Manufacturer: MHG Strahlanlagen GmbH, Düsseldorf Type: Injector sandblasting system SMG 260 DTTA (rotary table blasting system) Year of manufacture: 2023 Prodpfx Ae Adzhrsi Tec Operating hours: approx. 400 hours Condition: Almost new – blasted exclusively with glass beads, minimal wear Housing color: RAL 7021 Blasting stations: 3 blasting stations with a total of 8 automatic blasting nozzles Blasting nozzles: Injector blasting nozzles, flexibly lockable and adjustable Max. component height: 350 mm Airlocks: 2 airlocks with automatic compressed air blow-off device Viewing window: Side viewing window with impact protection flap Access: 2 side doors, safety light curtain, release mechanism Abrasive material container: With level indicator (MIN) Control system: Siemens SIMATIC HMI, KTP700 display Power consumption: 6 kW Dust collector: 30 m³ dust collector for vacuum and room air extraction Location: 35216 Biedenkopf

Condition: new, Year of construction: 2026, - Hydraulic tandem axle (BPW) with trailing steering, 40 km/h, track width 2100 mm - 4x complete wheel 710/50 R30.5 173D, 10-hole Vredestein Flotation Trac - 2-circuit compressed air brake system with ALB, 40 km/h - Towing eye with cross member - Universal joint, wide-angle type, Z=6, Walterscheid, on one side Podpe Agam Esfx Ai Terc - Loading area lighting (LED) for direct connection to the tractor

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: Serial No.: 167, type of input current: three-phase, input voltage: 380 V, total width: 800 mm, total length: 5,300 mm, total height: 1,900 mm, year of last overhaul: 2025, overall weight: 2,200 kg, pressure: 70 bar, We offer this used Ruian 260 blister packing line, year of construction 2019. Punching frequency: 21 times/min Max pulling length: 230 mm Max forming depth: 20 mm Max forming area: 250×220 mm Total power: 12 kW Voltage: 380 V Voltage frequency: 50 Hz Air consumption: 1 m³/min Pressure: 7 MPa Prsdpj Adq Ibofx Ai Toc Machine dimensions: 5300×800×1900 mm Weight: 2200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, - Hydraulic tandem axle (BPW) with trailing arm steering, 40 km/h, track width 2100 mm - 4x complete wheel 710/50 R30.5 173D, 10-hole Vredestein Flotation Trac - Two-line pneumatic brake system with ALB, 40 km/h - Towing eye with cross member - Universal joint, wide-angle, single-sided, Z=6, Walterscheid Podpfxo Agam Ns Ai Terc - Cargo area lighting (LED) when directly connected to the tractor

Condition: used, Year of construction: 2012, _____Strautmann Giga Vitesse CFS 4401 DO Year of manufacture: 2012 Capacity: 4,600 CFS Roller Metering roller Pedpjzknxmefx Ai Tsrc Silage additive system Forced steering Chopping flap (front) Hydraulic suspension Tires: 750/45 R 26.5 Price: 46,000.00 Euro (net) 54,740.00 Euro (+19% VAT) Location: null

Condition: used, Year of construction: 2005, Technical details: Psdpfx Aiezgvhhs Tjrc pressure: 58 t box depth: 1145 mm material: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen bottles Feed opening: L: 1145 x B: 600 mm voltage: 400V / 50 V / Hz total power requirement: 4,0 kW weight of the machine ca.: 2,6 t machine dimensions LxWxH: ca. 1,07 x 1,84 x 3,1 m Anwendung: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen platzsparende Recycling Lösung kompakte Bauart automatische Pressplattenrückführung, dadurch erhöhter Bedienkomfort Öffnung an der Vorderfront Tür horizontal verschiebbar ca. 600mm Presskammer/Ballengröße: LxBxH: 1000 x 600 x 600 mm (0,36 m³) Bindeeinheit Band- und/oder Drahtabbindung Bedienung über Schalttafel *

Condition: used, Year of construction: 2014, operating hours: 2,000 h, functionality: fully functional, sheet thickness (max.): 38 mm, sheet thickness steel (max.): 38 mm, sheet thickness aluminum (max.): 25 mm, table length: 3,000 mm, working width: 1,500 mm, table width: 1,500 mm, working length: 3,000 mm, controller manufacturer: Hypertherm, controller model: EDGE Pro, control type: CNC control, sheet thickness stainless steel (max.): 25 mm, Equipment: cooling unit, documentation/manual, We offer this used Ermaksan ER 4000 Plasma Cutting Machine, year of construction 2014. Prjdpfx Ajz Sqpioi Tsc Hypertherm HyPerformance® HPR260XD plasma source and Hypertherm EDGE® Pro CNC control. The table size is 3000x1500mm, and it uses TurboNest® CAD/CAM software. It can cut black steel up to 38mm, stainless steel, and aluminum up to 25mm. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, EURO-Jabelmann bagging scale, model TN 260, with bulk material hopper 1,500 × 1,500 mm – year of manufacture 2022 – like new, including accessories For sale is a practically new bagging scale, model TN 260, from EURO-Jabelmann (manufacturer in Itterbeck, Made in Germany), with an upstream bulk material hopper 1,500 × 1,500 mm, manufactured in 2022. The scale doses and fills bulk materials such as potatoes, onions, vegetables, or firewood directly from the storage hopper into bags. Condition: – Like new, hardly used – Fully functional – Inspection and test run possible by arrangement Pjdpfxjz Tda Re Ai Terc Included in the scope of delivery: – Bagging scale, model TN 260, with bulk material hopper 1,500 × 1,500 mm – “Gantry” for hand sewing machine with roller track, roller device, and aluminum spring tensioner (load capacity 4–6 kg) – new price €825 net – 2× hand sewing machine Union Special 4000A (bag sewing machine, single-thread chain stitch, with thread chain separator, 90 W) – new price €1,425 each net New price of the scale without accessories: €18,950 net. New price of the entire package: €22,625 net. Price: €10,000 net plus VAT (11,900 € gross) for the complete package, negotiable – VAT can be shown separately. Collection & shipping: – Location: 31848 Bad Münder am Deister – Loading will be assisted – Shipping by freight forwarder possible for an extra charge

Condition: used, Year of construction: 2003, Technical details: pressure: 58 t box depth: 1145 mm material: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen bottles Feed opening: L: 1145 x B: 600 mm voltage: 400V / 50 V / Hz total power requirement: 4,0 kW weight of the machine ca.: 2,6 t machine dimensions LxWxH: ca. 1,07 x 1,84 x 3,1 m Pjdjzgvhuepfx Ai Torc Anwendung: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen platzsparende Recycling Lösung kompakte Bauart automatische Pressplattenrückführung, dadurch erhöhter Bedienkomfort Öffnung an der Vorderfront Tür horizontal verschiebbar ca. 600mm Presskammer/Ballengröße: LxBxH: 1000 x 600 x 600 mm (0,36 m³) Bindeeinheit Band- und/oder Drahtabbindung Bedienung über Schalttafel *

Condition: excellent (used), Manufacturer: Strautmann Type: PP 1207 Plus Bale dimensions (L x W x H): 1200 x 1100 x 730 mm Bale weight: approx. 400 - 500 kg External dimensions (L x W x H): 1850 x 1047 x 3079 mm Transport height: 2500 mm Filling opening: 1190 x 600 mm Pjdpfxsv Aiymj Ai Tsrc Pressing force: 59 tons / 580 kN Capacity: 1 - 2 bales/hour Number of ties: 4 Press weight: 2300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: sheltered indoors/outdoors Noise level: less than 80 dB(A) I also have Strautmann PP 1207 balers, model years 2009-2011, price €5500. I also have Strautmann PP 1208 balers, model years 2014-2015. Strautmann AutoLoadBaler, model years 2018, price €6500.

Condition: good (used), Year of construction: 2019, operating hours: 18,400 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, workpiece length (max.): 2,600 mm, workpiece width (max.): 700 mm, total height: 2,700 mm, total length: 6,335 mm, total width: 4,600 mm, table load: 1,500 kg, overall weight: 16,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 20 rpm, operating hours of spindle: 11,370 h, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Travel ranges & dynamics • X-axis: 2,600 mm • Y-axis: 700 mm • Z-axis: 700 mm • Rapid traverse rate / feed rate: 40 m/min Work table (fixed table) • Clamping area: 2,900 x 700 mm • Max. table load: 2,150 kg Milling spindle (standard configuration) Pjdpfx Asz Indhei Torc • Max. speed: 15,000 rpm • Drive power (40% duty cycle): approx. 18.9 – 20 kW • Tool holder: SK 40 Tool magazine • Tool positions: 30 • Max. tool length: 300 mm

Condition: used, Year of construction: 2017, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control Celos 840 D SL Operate Siemens turning speed range - main spindle 20 - 20.000 min/-1 power capacity - main spindel 35 / 25 kW Torque 130 / 86 Nm tool taper HSK-A63 b - axis +-100 ° table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 120 pos. tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 67 kVA weight of the machine ca. 16,24 t dimensions of the machine ca. 8,0 x 5,6 x 2,9 m CNC - Travel Column Milling Machine DMG MORI - DMF 260 - 7 Psdpo Afpziofx Ai Torc - NC tilting milling head (B-axis ±100°) - Balluff BIS C tool identification system -> One read/write head each at the tool loading/unloading station -> Evaluation unit -> CNC software -> Balluff chips NOT included! - incl. workspace partition - MPC (Machine Protection Control) - ATC (Application Tuning Cycle) - Dual changeover filter (25 µm) - Bed flushing / door flushing system (includes additional pump) - 2D surface feature (as an add-on to ATC) - EES (Extended Editing System) option - Provision for refilling the internal coolant supply (ICS) system - Provision for vacuum clamping - Clamping devices and machine vises NOT included!