Used Studer S40-4 for sale (58,882)

Condition: excellent (used), mileage: 25 km, power: 382 kW (519.37 HP), first registration: 04/2026, fuel type: diesel, axle configuration: 6x6, wheelbase: 4,150 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: other, emission class: euro3, Year of construction: 2026, Equipment: air conditioning, electric window regulation, retarder, trailer coupling, = Additional options and accessories = - All-wheel drive - Leaf spring suspension - Intarder - Cab - Sun visor Ndsdpoyyyn Isfx Aa Rea - Power take-off (PTO) - Tow hitch = Further information = Transmission: continuously variable transmission Front axle: Steerable Number of cylinders: 6 GVWR: 180,000 kg Body brand: TURBO RETARDER CLUTCH Technical condition: very good Optical condition: very good

Condition: excellent (used), mileage: 21 km, power: 520 kW (707.00 HP), first registration: 04/2026, fuel type: diesel, axle configuration: 6x6, wheelbase: 4,150 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: other, emission class: euro3, Year of construction: 2026, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, retarder, trailer coupling, = Additional Options and Accessories = - All-wheel drive - Leaf spring suspension - Differential lock - Intarder - Cab - Sun visor - Power take-off (PTO) Nodpfx Ajyyypfoa Rjda = Additional Information = Transmission: TURBO RETARDER CLUTCH, continuously variable transmission Front axle: Steerable Number of cylinders: 6 GVWR: 180,000 kg Technical condition: very good Optical condition: very good

Condition: good (used), Geared motor, electric motor, electric geared motor -Speed: 54 rpm -Power: 0.25 kW Nedpfx Aoc R R Ayoa Rsda -Design: B5 angle -Shaft diameter: 25 mm -Protection class: IP 44 -Outer flange: Ø 160 mm -Recess: Ø 110 mm -Number: 1x motor available -Price: per piece -Dimensions: 390/200/H200 mm -Weight: 21 kg/piece

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 54 rpm -Power: 0.25 kW -Construction: B3 angle Nedpjc R R Axofx Aa Rjda -Diameter shaft: 25 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 380/240/H155 mm -Weight: 17 kg/piece

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear units SEW type: S40 Ndsdpfx Aaecxta Sj Rea -Manufacturer motor SEW type: DFT71C2BAZ -Motor power: 0.37 kW -Speed range: 41-205 rpm -Motor: adjustable -Drive shaft: Ø 25 mm -Construction: B3 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 560/180/H275 mm -Weight: 30 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 41 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Price: per piece -Number: 2x available Ndedpfx Aajchq Iks Rea -Dimensions: 550/290/H276 mm -Weight: 17 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 11/21 rpm -Power: 0.2/0.28 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 Nodpfx Aaschq Ihe Reda -Brake -Dimensions: 450/200/H220 mm -Weight: 24 kg

Condition: ready for operation (used), For sale here is a main spindle from a Fooke Endura milling machine; it is in working condition. Ndjdpezhh Ipjfx Aa Rja

Condition: ready for operation (used), Nord Getriebebau SK 1S40A-71 L/4 gear motor, serial number: 952356400, used, in good preserved condition, 100% functional, delivery as shown in photos. Nsdpfx Aow A Ui Eja Reda

Condition: ready for operation (used), Danaher Motion DBL3H00250-BR2-000-S40 servo motor, serial number: 1306312230, used, shows significant signs of wear, 100% functional, scope of delivery as shown in the photos. Ndedjk Axb Ajpfx Aa Roa

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,550 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, clearance between the columns: 750 mm, Equipment: documentation/manual, CNC Jig grinder HAUSER S 40 400 TECHNICAL CHARACTERISTICS : Stroke X axis : 650 [mm] Max. Stroke speed X axis : 4000 [mm/min] Working feed X axis : 0 - 1800 [mm/min] Stroke Y axis : 450 [mm] Working feed Y axis : 0 - 1800 [mm/min] Stroke Z axis : 130 [mm] Min. Stroke speed Z axis : 0.5 [mm/min] Max. Stroke speed Z axis : 12000 [mm/min] Stroke frequency Z axis : max. 4 [Hz] Stroke W axis : 500 [mm] Planetary speed C axis : 5 - 250 [rpm] Max. Stroke speed W axis : 800 [mm/min] Stroke U axis (radial feed) : 5.5 [mm] Distance between columns : 750 [mm] Table length : 770 [mm] Table width : 630 [mm] Clearance between grinding motor and table : 585 [mm] Max. load on table : 500 [Kg] Supply voltage : 400 [V] Weight : 4550 [Kg] EQUIPMENT INCLUDED: x1 HI-CUT pack including: Njdpfx Aaszdfbyj Reda -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -automatic paper tape filtration unit x1 grinding motor 22 S, speed 4500 - 22500 [rpm], for EX23 collets - part number: 181561 x1 45 S grinding motor, speed 9000 - 4500 [rpm], for EX19 collets - reference: 144017 x1 80 S grinding motor, speed 40000 - 80000 [rpm], for F6 collets - reference: 144021 x1 grinding motor for slot grinding (motor + belt are included) - reference: 144022 x3 grinding tools for slot grinder x1 set of belts for slot grinding motor x1 intermediate plate for alignment of grinding motors - reference: 192940 x1 infinitely adjustable cantilever plate with mounted grinding motor for grinding up to Ø360 [mm] - reference: 144023 x1 adjustable plate, for tilting grinding motors and turbines (up to 16°) - reference: 126148 x1 set of 2 HAUSER 90° angle brackets - reference: 155361 x1 centring microscope - reference: 146318 x1 tool contact detection device - reference: 162334 x20 grinding wheel holders x1 cable for grinding motor Various tools Complete documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT44001000966, empty load weight: 9,400 kg, maximum load weight: 30,600 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 10/2010, loading space length: 7,145 mm, loading space width: 2,750 mm, loading space height: 900 mm, total length: 12,120 mm, total width: 27,500 mm, total height: 900 mm, suspension: steel, tire size: 235/75 R17,5", color: red, The images shown are archive photos! Permissible / technical gross weight: 24,000 / 40,000 kg Permissible / technical payload approx.: 14,600 / 30,600 kg Permissible / technical axle load: 24,000 / 40,000 kg Unladen weight (basic version) approx.: 9,400 kg +/- manufacturing tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Ndodpfx Aaeyxq A Hj Roa Low bed platform length in wheel track area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loaded bed height in low bed approx.: 900 mm Drawbar height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection 1 plastic toolbox, Extendable width up to 3,250 mm (not at rear bevel) (track width of machine/vehicles to be transported must not exceed outer frame width of 2,750 mm) Storage compartment for wooden boards in the center of the loading area 70 mm wooden boards for extension to 3,000 mm 2 pairs of stake pockets in the low bed recessed into the longitudinal beams Lashing points low-bed: 2 pairs of lashing eyes on neck, 5 tons each 1 pair of lashing eyes in rear bevel 4 lashing eyes recessed in the middle of the floor 2 pairs of keyhole profiles in wheel track area for insertion of longitudinal guide rails and as additional lashing option 6 pairs of lashing pins recessed in outer low-bed frame, 10 tons each 5 pairs of stake pockets recessed in the outer frame of the low bed 4 additional pairs of 10 ton lashing eyes: - 1x on neck - 3x recessed in low bed floor Trailer towing device, turntable design Drawbar with certified 50 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization front and rear (rocker balancing) Wheels and Tires 235/75 R 17.5" Steel twin wheels, factory silver finish Brake System 2-line compressed air brake system Spring-loaded parking brake 2 foolproof couplings at front, with interconnecting lines to tractor ABS and ALB, with ABS socket at front and connection cable Note: The trailer may only be towed by vehicles ensuring proper ABS functionality! Floor Neck area with steel / checker plate covering Followed by 70 mm softwood floor; in wheel arch area steel / checker plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, with wooden covering Hydraulically operated via tractor auxiliary drive Operating Notes At 10,000 kg axle load, an exemption permit is required, only indivisible loads permitted! Note! Oversize length and width require a permanent special permit. When applying for an exemption for regulated heavy haulage, an axle load indicator is required for air-suspended vehicles! This applies to any deviation from § 34 StVZO (axle and permissible total weight overrun), which requires an exemption under § 70 StVZO. The specified gross weight is technically possible; depending on the load, the total weight permitted by axle, support, and kingpin loads may not be achieved. (Poor driving or tracking behavior may occur due to improper load distribution) The images shown are archive photos!

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, WE OFFER AN NICE CONDITION TWIN ROBOTI WELDING CELL YEAR 2012, MACHINE WAS USED IN PRODUCTION FROM 2012 TO 2019 ONLY 7 YEARS IN USE . MACHINE WE CAN PUT FOR CUSTOMER ON GROUND, START UP AND MADE AN OPERATORS TRAINING POSITIONER IS HORIZONTAL TURNING: SEE VIDEO Nedpfxovkkhbe Aa Rsda LENGHT OF POSITIONER: 4 METERS MAX LOAD PER SIDE PALET 750KG ROBOTS 2X OTC MODEL: NV61-NEFN ROBOTS CONTROL: AX-21 CV0000 WELDING MACHINES 2X FRONIUS CMT TOOLINGS PALET CAN BE CHANGING WE CAN OFFER ALSO TOLINGS FOR THE CUSTOMER PRODUCT

Condition: excellent (used), Year of construction: 2000, BOGE S40 screw compressor Technical data Capacity: 4.30m3/min (4300 L/min); 30 KW engine; max pressure: 10 bar; mileage: 10876 h; Nedpfxjvvkyho Aa Rjda year: 2000

Condition: used, Year of construction: 1955, functionality: fully functional, machine/vehicle number: D12L/7525, Offer Number: D12L/7525 Machinetype: wire nail press Make: WAFIOS Type: S40 Constr. year: 1955 Ndodpfewi S Rgsx Aa Roa diameter range: 0,8-1,8 mm nail length: 10-40 mm output - pieces/min: 550 Location: In our warehouse

Condition: used, Year of construction: 2015, Manufacturer: Krohne Model: OPTIMASS 1300 C S40 Year : 2015 Type : Mass flow meter Nodex R Davopfx Aa Roda Application : Flow measurement Quantity available : 2 12-24 VDC Power : 12 W Maximum pressure class for all hygienic connections is 10 bar at 130°C

Year of construction: 2026, condition: new, machine/vehicle number: Al160, Compact size, high productivity food processing machine: Vegetable processor is a productive, compact-sized commercial cabbage shredding machine that is intended for cabbage shredding, slicing, grating, as well as beets, carrots grating, and julienne cutting. High productivity 500-1000 kg/h, high-quality materials as food-grade stainless steel AISI 304. Made for small and medium-sized producing companies. General Features: • Productivity 500-1000 kg/h; • High quality, longlasting stainless steel cutting knives (up to 100 tons between sharpening); • Disc diameter of 40 cm, grants, that you can put whole or cut in half small cabbage heads; • The universal cutting machine, very good for slicing, grating, mashing, julienne stick cutting; Nsdpjdwfdqsfx Aa Reda • Compact size can be equipped with wheels and easily transported; • Easy to clean, can be washed with low-pressure water; • All food contact elements made of stainless steel; • Powder-painted frame, three-layer lacquer in the standard version, or full stainless steel version • Machine motors can be adjusted as required up to 2200 W. • Electric connection 400/220/120 Volts, 50-60 Hz. For different connections, please ask;

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: S40Basic, Compact size, high productivity vegetable processing machine: ​ The commercial vegetable processing machine, cabbage shredder S40 is a productive, compact size commercial food processing machine that is intended for cabbage shredding, slicing, High productivity 500-1000 kg/h, high-quality materials as food-grade stainless steel AISI 304. Made for small and middle-size producing companies. General Features: Productivity 500-1000 kg/h; High quality, long-lasting stainless steel cutting knives (up to 100 tons between sharpening); Disc diameter of 40 cm, grants, that you can cut small cabbage heads that are sliced in half. Universal cutting machine, very good for slicing, grating, mashing, julienne stick cutting; (additional attachments) Compact size, can be equipped with wheels and easily transported; Nsdpfx Aajffwgvj Rjda Easy to clean, can be washed with low-pressure water; All food contact elements made of stainless steel; Powder painted frame, three-layer lacquer in the standard version, or full stainless steel version(additional option) Machine motors 0.75kW in the ​standard version Electric connection 400/220/120 Volts, 50-60 Hz. For different connections, please, ask

Condition: new, Year of construction: 2026, functionality: fully functional, High performance soft and hard cheese grater. The 2.2kW motor will easily grate any cheese. By changing blades you can get vegetable slicer with the same machine. General Features: • Productivity 500-1000 kg/h; • High quality, long lasting stainless steel cutting knives (up to 100 tons between sharpening); • Disc diameter of 40 cm, grants, that you can put whole or cut in half small cabbage heads; • The universal cutting machine, very good for slicing, grating, mashing, julienne stick cutting; • Compact size can be equipped with wheels and easily transported; • Easy to clean, can be washed with low-pressure water; • All food contact elements made of stainless steel; • Powder painted frame, three-layer lacquer in the standard version, or full stainless steel version(picture); • Machine motors can be adjusted as required up to 2200 W. • Electric connection 400/220/120 Volts, 50-60 Hz. For different connections, please, ask; Nsdpedv Ec Ujfx Aa Rsda

Condition: new, pressure: 40bending length: 1600column width: 1980motor: 4slide stroke - max.: 150opening width: 370CNC Press break KK Industries 40x1600 4 Axis Y1-Y2-X-R mit CNC Bombing Technical Parameters:Nominal Pressing Force: 63 kN Bending Length: 1600 mm Distance Between Columns: 1980 mm Throat Depth: 250 mm Slider Stroke: 150 mm Maximum Opening: 370 mm Slider Down Speed: 180 mm/s Slider Return Speed: 150 mm/s Slider Working Speed: 15 mm/s Main Motor Power: 4 kW CNC System: ZY68 Number of Control Axes: 4+1 Oil Tank Capacity: 90 L Back Gauge:X-Axis:X-Axis Travel: 600 mm X-Axis Speed: 200 mm/s Positioning Accuracy: ±0.10 mm Repeat Positioning Accuracy: ±0.015 mm Motor Power: 0.85 kW R-Axis:R-Axis Travel: 150 mm Nedpfx Aaowacq Ee Roda R-Axis Speed: 100 mm/s Positioning Accuracy: ±0.10 mm Repeat Positioning Accuracy: ±0.015 mm Dimensions and Weight:Length: 1850 mm Width: 1250 mm Height: 2180 mm Weight: 2700 kg Motor Power (additional): 0.85 kW Delem T53 Control System (additional cost 5,000¤)

Condition: used, overall weight: 40,000 kg, first registration: 04/2009, Schwarzmüller G404 Unladen weight: 8,580 kg Gross weight: 40,000 kg Ramps: mechanical Leaf suspension Errors and omissions excepted! Njdpfoyrdhhox Aa Roda

Condition: like new (used), functionality: fully functional, overall weight: 7,000 kg, This machine is configured with 4 fully electronic CNC axes and has integrated software that generates the automatic program. Description Maximum gear diameter: 400 mm Gear width: 76 mm Stroke: 82 mm Rotation: 150 - 700 rpm Module: min. 0.5 mm Module: max. 6 mm Machine weight: approx. 7500 kg Electrical equipment: – Operating voltage: 380/400 V – Protection: 20kva Machine with new CNC Siemens 808D Siemens drives and servomotors New update 2025 Screens for automatic program generation Automatic cycles NR12 Included in Chip conveyor Coolant tank Automatic lubrication Ndodpfx Aaowvbqis Rea Digital pressure controls Hydrostatic guide

Year of construction: 1992, condition: ready for operation (used), - USED - BRIDGE-TYPE CNC GRINDING MACHINE LONGITUDINAL TRAVEL: 650 mm TRANSVERSAL TRAVEL: 450 mm VERTICAL TRAVEL: 500 mm VERTICAL SPINDLE TRAVEL: 130 mm Nedpfxeyru Nis Aa Rsda TABLE SIZE: 770 x 630 mm MAX ADMITTED LOAD: 500 Kg DISTANCE BETWEEN THE COLUMNS: 750 mm DISTANCE BETWEEN SPINDLE AXIS-TABLE: 0-600 mm SPINDLE: 30.000 rpm CONTROL UNIT: FANUC 210 IS-M WEIGHT: 4000 Kg OVERALL DIMENSIONS: 2650 x 2000 x 3150 mm ACCESSORIES: RS 232 SERIAL PORT NOTE: MACHINE WITH SPINDLE 60/70.000rpm, SPINDLE 100/120.000rpm; MACHINE COMPLETELY OVERHAULED IN 2002

Condition: excellent (used), functionality: fully functional, planing width: 430 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 2,900 mm, total width: 700 mm, total height: 1,000 mm, overall weight: 750 kg, SAC FS 400 Planer | 4-knife surface planer! Excellent condition! SAC FS 400 Planer | 4-knife surface planer! EXCELLENT CONDITION! Machine from an Italian manufacturer. TECHNICAL SPECIFICATIONS: Ndsdjzqlqmjpfx Aa Rea - Table length 2900 mm - Working width 430 mm - 4 traditional knives - 3kW motor - Shaft rpm 5000 - Shaft diameter 120mm - Both tables are adjustable - Stable, solid fence - Shaft damping system Machine dimensions: - Length 290 cm - Width 70 cm - Height 100 cm - Weight 750 kg WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Ndjdpozma Tbofx Aa Rsa Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.