Used Sundstrand Tfp200/26,5 D Co 01 Lab F/5H for sale (86,443)

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 8,004 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,520 mm, fuel type: diesel, mast type: triplex, construction height: 2,121 mm, fork carriage width: 980 mm, fork length: 1,000 mm, empty load weight: 2,985 kg, total length: 2,200 mm, drive type: Diesel, construction width: 1,080 mm, Diesel forklift Load center: 500 ISO class: FEM 2 A Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 18x7-8 Front tire condition: 40 - 60% Dodpfxoz Hnv Uj Adrecn Rear tire type: Superelastic Rear tire size: 2 x 18x7-8 Rear tire condition: 80 - 100% Battery year of manufacture: 2015 Additional single hydraulic circuit, integrated side shifter, windshield, roof window, roof guard, single-pedal operation, 2 work lights at the front

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: Dcsdpfx Adszg Dx Uorjn High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: as good as new (ex-display), Year of construction: 2024, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 15 mm, positioning speed: 5 m/min, repeat accuracy: 5 mm, overall weight: 12,000 kg, warranty duration: 12 months, working range: 3,050 mm, Equipment: safety light barrier, Manufacturer: DURMA Model: HD-F 3015 III Fiber Working area X-Y-Z: 3060x1530x160 mm Laser power: 10000 Watt IPG Control system: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness, mild steel: 30 mm Sheet thickness, stainless steel: 26 mm Sheet thickness, aluminum: 15 mm Sheet thickness, brass: 20 mm Sheet thickness, copper: 15 mm Sheet size: 3048x1524 mm Load capacity: 200 kg/m² Speeds, X-Y axes: 100 m/min Speeds, X-Y axes, simultaneous: 280 m/min Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Footprint (L/W/H): approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet positioning and sheet size measuring system Automatic nozzle cleaning Positioning laser diode Central lubrication Simple user interface, parameter page (power, speed, pressure) External CAD/CAM programming software with auto-nesting, optionally Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 10000 Watt including cooler Filter, compact dust collection system Vanterm Dcedpfx Ajdx Nalodron Motorized chip conveyor for small parts/scrap Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode and automatic sheet layer detection, measurement Automatic nozzle changer The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by prior appointment. Further machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: used, Year of construction: 2020, Format: 0x0 Equipment: Hugo Beck Flexo X Intermittent Film Packaging Machine Product Feed:Manual as a standalone machine / Automatic in-line (flexible configuration) Control System:Touchscreen with temperature memory and reproducible format settings Film Processing:PE, PO, bio-films, center-folded film, and flat film Sealing System:Side sealing + intermittent cross-sealing Operation:Intermittent Kallfass Compact 650 D Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Dcjdpezpgh Dofx Adron Safety:Safety equipment according to EC directive EN 60204

Condition: used, axle configuration: 3 axles, first registration: 08/2015, color: other, Year of construction: 2015, Empty weight: 3.800 kg Dsdpfx Adozhv D Serjcn Axle 1: left 12 mm right 12mm Axle 2: left 12 mm right 12 mm Axle 3: left 12 mm right 8 mm We have the possibility to stack trailers!

Condition: as good as new (ex-display), Year of construction: 2024, Machine dimensions: • (L x W x H) 9,350 mm x 2,800 mm x 2,300 mm, length including filter: 5,300 mm. Dcodpfxsd N Rfds Adrjn Technical details: • Max. sheet size: 3,048 x 1,524 mm • Max. sheet weight: 200 kg/m² • Laser power (IPG): 6 kW • Z-axis travel: 125 mm • Max. synchronous speed (X-Y): 141 m/min • Max. acceleration (X-Y): 10 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm Standard equipment: • Control system: Siemens Sinumerik 840 D • Laser head: Precitec light Cutter F 125 Focus • Sheet support detection and measuring system • Positioning laser diode • Automatic sheet changer • Automatic nozzle cleaner • Central lubrication unit • Chip collection tray • Software: Lantek or Metalix CAD/CAM software with auto-nesting • Remote control: remote maintenance Laser cutting options: • Pierceline (piercing settings) • Focusline • Plasmaline • Fastline • Flyline Options include: • Tower with 10 pallet spaces • Automatic chip conveyor • Integrated camera (part tracking, micro-joints) • Air dryer • Automatic nozzle changer • Camera inside

Condition: used, Year of construction: 2014, Year of manufacture: 2014 Faymonville Mega Z-5H+3L-V-AT-A Lowbed Bj 2014, Bj 2006 Dsdpfx Adjz I A U Uerocn 3 axle dolly (bj 2014) Airsuspension SAF axles First axle is a liftaxle Last axle positive steert Low Bed (bj 2014) Length 6.410 mm + 3.700 mm extendible Width 3.000 mm + Side extensions 3.500 mm 5 axle (bj 2006) Hydraulic Suspension All 5 axles hydraulic steert Extra remote steering Excavator trough Width 2.750 mm With 80 km/h Kingpin 30 ton 3 axle Dolly 36 ton 5 axle trailer 60 ton Total 125 ton With 30 km/h Kingpin 30 ton 3 axle Dolly 39 ton 5 axle trailer 65 ton Total 134 ton

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Equipment: documentation/manual, We offer an very special development line of water transfer printing with complete know how of CUBIC - JAPAN EQUIPMENT CAN BE USED FOR ALL KIND MATERIALS, PLASTIC, WOOD, METAL AND OTHER.... Specifications Manufacturer COLOR DEC Model ITALY-CUBIC LAB 2000 Year 1996 Condition Used COMPLETE CUBIC PLANT- 3D WATER TRANSFER PRINTING EQUIPMENT LOOK ATTACHED PHOTOS Include complete production equipment for 3D watertransfer print. -washing machine -transport system for clean room -clean room humidity device -storage for the CUBIC FILMS - heating-drying cabine for lack drying -bath with halfautomatic floating system- possiblle to make more parts at once, depende from the size of printing parts Equipment is in perfect working condition, ready to use. FOR ADDITIONAL PHOTOS WE CAN SEND BY EMAIL. ALL DOCUMENTATION WILL BE PRESENT TO BUYER. Djdpfx Adevk Ev Herocn

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 1,882 h, load capacity: 2,000 kg, lifting height: 3,145 mm, free lift: 1,519 mm, fuel type: diesel, mast type: duplex, construction height: 2,121 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, empty load weight: 3,295 kg, total length: 2,350 mm, drive type: Diesel, construction width: 1,150 mm, Diesel forklift Load center: 500 ISO class: PIN-TYPE Mast type: Duplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 200/50-10 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 18x7-8 Rear tire condition: 80 - 100% Battery year of manufacture: 2020 Djdpfx Ajz Htitedrjcn Double auxiliary hydraulics, integrated fork positioner with side shift, full cabin with heating and air conditioning, rear-view camera, fire protection system, spark arrester, 2 x front work lights, 1 x rear work light according to StVZO (German Road Traffic Licensing Regulations).

Condition: new, Year of construction: 2025, Fully automatic High-speed Sideshrink Machine. Continuous motion sealing machine with moving sealing unit for reliable and trouble free packaging. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 120 cycles/minute; max. packaging size: L(80-1000)xW(80-400)xH(5-180) mm; sealing blade length: 500mm; 220V, 6.5kW, 6bar, 0.6m³; machine dimensions: L5405xW1780xH1380 mm. Dcsdpfx Adjv Nl Hpsren Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic continuous side sealer for fast and reliable product flow due to continuous motion sealing unit. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 70 cycles/minute; max. packaging size: L(80-700)xW(80-380)xH(5-180) mm; sealing blade length: 530mm; 220V, 6.5kW, 6bar, 0.6m³; machine dimensions: L4755xW1660xH1370 mm. Djdpfsv Nl Hijx Adrscn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic High-speed Sideshrink Machine. Continuous motion sealing machine with moving sealing unit for reliable and trouble free packaging. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 120 cycles/minute; max. packaging size: L(80-1000)xW(100-500)xH(5-180) mm; sealing blade length: 630mm; 220V, 6.5kW, 6bar, 0.6m³; machine dimensions: L6350xW1950xH1380 mm. Dcodjv Nl Hvepfx Adrsn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, functionality: unexamined, Ferwood Code: RU0012077 - Manufacturer Code: HDS03,2W075N-HS12-01-FW - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 14 kg - Dimensions: 70x46x34 - If interested, we offer a refurbishment service, please contact us. Dedoyztwljpfx Adrocn

Condition: excellent (used), Stäubli robot RX 60B LCR with control unit and handheld device Here we offer a Stäubli robot RX 60B with control unit. Robot: Stäubli robot RX 60B LCR Lifting capacity (nominal load - kg): 2.5 kg Weight: 46 kg Type: RX60B LCR / F04/50R7E1/A/01 Control unit: Stäubli CS8 RX60B LCR 3X400V - 50/60 Hz - 3000VA Weight: 170 kg Type: CS8 RX60BLCR / F06/546XA1/C/01 Handheld device: Stäubli SP1 Condition: used Scope of delivery: (See picture) Dsdozdytvjpfx Adrjcn (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, maximum load weight: 39,365 kg, overall weight: 44,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 11/2026, total length: 11,050 mm, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2023, Additional information: * Type | First axle: Hankook R * Tire size | First axle: 385/55 R22.5 * Tire tread depth inner left | First axle: 50% * Tire tread depth inner right | First axle: 50% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Hankook R * Type | Third axle: Hankook R * Tire size | Second axle: 385/55 R22.5 * Tire size | Third axle: 385/55 R22.5 Dcsdpfxoz I H Eke Adrsn * Tire tread depth inner left | Second axle: 50% * Tire tread depth inner left | Third axle: 50% * Tire tread depth inner right | Second axle: 50% * Tire tread depth inner right | Third axle: 50% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Price on request: Yes * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Drum brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Drum brakes * Brake type | Third axle: Drum brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension Additional features: * Homepage * Lift axle * SemCollection * SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your specific country. Location | Maasdijk (NL) | 140 km from the German border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors. The stated prices exclude BPM (Dutch motor vehicle tax) and are only valid for export.

Condition: ready for operation (used), Indramat DKR02.1-W200Z-BE12-01-FW MNR: R911273637 AC-Controller SN:261355-00741. The item was only briefly used for testing purposes, is used with minor signs of wear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! Dodpfxjx Dw Evj Adrocn

Condition: used, axle configuration: 3 axles, first registration: 01/2016, color: other, Year of construction: 2016, Empty weight: 4.861 kg Axle 1: left 8 mm right 8 mm Dcodpfxozrfgqo Adren Axle 2: left 10 mm right 10 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: used, This listing is for Genlab OV/100/SS/F/DIG Oven The unit is in full working condition and ready for immediate use This high-quality laboratory oven features a stainless steel interior, fan circulation for temperature uniformity, and an intuitive digital controller for precise thermal processing. [[1](), [2](?srsltid=AfmBOoqrBx2xG5acm9HXLERUkvFsY4t5ruoXCtKGooEYCW5co-g 0--YA), [3]()] Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Dodpfxezc H Tbj Adrscn Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: new, All Items Boxed in original Packaging. Supplier Catalogue No 5555305P9-SS-A EXPIRY DATE 31st July 2026 Dodpoxhdvcefx Adrjcn All Items Unused and boxed in there original Packaging - 4 Pieces Sartorius Lab Instruments Sartopure GF+ MidiCaps (0.65 µm, BH9, 4 pcs) are high-quality filter capsules designed for microbial removal and particle filtration in laboratory and industrial applications. Here’s a breakdown of their key features and specifications

Condition: used, Year of construction: 1990, Max pressure: 28 Bar Dcsdpfxjywi Ixs Adren Flow: 120 m³/h Suction dimension: 20 cm Discharge dimension: 20 cm Used for: Oil, Flammable Liquid Dimensions (LxWxH): 4 x 1.3 x 1.65 m Approx. weight: 3,800 kg Operating hours: 76 since new

Condition: excellent (used), Labotek Type: FMD-M-M-15-15-V Model 101134 The Labotek FMD-M-M-15-15-V model belongs to the FMD-M series from Labotek, a leading manufacturer of equipment for material drying, dosing, and conveying in the plastics industry. The FMD-M series includes modular dryers that have been developed for processing plastic granules. Technical specifications of the FMD-M series Type designation: FMD-M 15/15 Dimensions: 80 x 120 x 120 cm Net weight: 88 kg Shipping weight: 113 kg Shipping dimensions: 80 x 120 x 120 cm Shipping volume: 1.15 m³ These dryers are designed for processing plastic granules and are characterized by their modular design, which allows for flexible adaptation to various production requirements. Volt: 3x400 Vac+PE Amp: 10.4 Amp Dcodpszii Dbefx Adren Overcurrent protection: 16 Amp kW: 2.6 kW HZ: 50/60 HZ The Labotek AVR3G is an industrial vacuum conveyor with a capacity of 1 liter, designed for the automatic conveying of free-flowing plastic granules. It is particularly suitable for small to medium-sized production plants, where space and weight are critical factors. Technical data of the Labotek AVR3G (1 liter): Capacity: 1 liter Conveying capacity: Up to 15 kg/h Conveyed material: Free-flowing, granular raw material (minimum particle size 3 mm) Operating noise level: Under 69 dB Material contact surfaces: Stainless steel AISI 304 Maximum material temperature: 80 °C Alarm function: In case of material shortage Power supply: Compatible with 50/60 Hz Weight: 88 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 3,336 h, load capacity: 1,800 kg, lifting height: 3,150 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,121 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Diesel, Diesel Forklift Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Standard Transmission: Single-Pedal Control Condition: Ready for use and fully functional Technical Condition: Good Front Tires Type: Super Elastic Front Tires Size: 18x7-8 Front Tires Condition: 20 - 40% Rear Tires Type: Super Elastic Rear Tires Size: 18x7-8 Rear Tires Condition: 20 - 40% Djdpfsyz D U Uox Adrscn Description: Delivered with a new FEM 4.004 inspection including inspection booklet. If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to discuss leasing & financing as well as delivery at favorable conditions. Linde equipment can also be traded in – even without purchasing it from us. Reported operating hours were read as of the date of registration. Subject to prior sale, changes and errors excepted. Load backrest, sideshift, Integrated sideshift 3rd valve, rear work lights, front work lights, half cab, safety light,

Year of construction: 2019, condition: defective spare-parts repository (used), functionality: not functional, Important note regarding the item's condition: Please read carefully before purchasing: This item comes from a business closure or warehouse liquidation. We were unable to test the device for functionality, and therefore it is explicitly sold as UNTESTED, DEFECTIVE, and NON-FUNCTIONAL. It is intended solely for hobbyists, technicians for repair purposes, or as a source of spare parts. The sale is made with the exclusion of any warranty regarding functionality or completeness. Product description: Offered is an industrial climate testing chamber / temperature and humidity testing chamber from the manufacturer SHENGS (Shanghai Shengs Electronic Technology Co., Ltd.). Devices of this type are generally used for material tests, aging simulations, or electronic component tests under defined temperature and humidity conditions. Features & visual characteristics (according to the images): • Interior: High-quality stainless steel interior, easy to clean. Includes a solid, perforated insert (grid). • Connections & access: Side cable entry (port) with a plug for passing through sensors or power cables for the test item. • Technical area: Easily accessible technical compartment on the side (electronics, contactors, relays, fan motors, and a stainless steel water tank for the humidification unit are installed). • Mobility: The heavy device is mounted on four stable swivel casters and can therefore be easily positioned at the place of use. • Other: Manometer on the outside, drain/supply hose in the lower area. Technical data (according to the nameplate): • Manufacturer: Shanghai Shengs Electronic Technology Co., Ltd. • Model: STH-2P-C (handwritten) • Year of manufacture / Date: 14.08.2019 • Serial number: SS-SC19011 • Power supply: 1 phase, 220V AC • Current consumption: 30A Visual condition: The device shows signs of wear and tear due to age and use (scratches, slight dirt, discoloration). A side panel for the technical area seems to be missing or was removed for the photos (please check the pictures carefully). The seals on the interior appear to be intact. All internal components shown in the pictures (circuit boards, cables, water tank) are included in the scope of delivery, but no guarantee is given regarding their functionality or completeness. Scope of delivery: • 1x SHENGS STH-2P-C climate testing chamber (as shown in the photos) • 1x Grid (already installed in the interior) • No other accessories, no manuals, or test reports are included. Shipping and pickup information: Due to its size and weight, regular parcel shipping is not possible. • Pickup: Pickup by the buyer is preferred (Please bring a suitable transport vehicle and possibly helpers/pallet truck). • Shipping via freight forwarder: Can be arranged on request and at the buyer's expense (buyer arranges shipping or freight costs are charged separately). Dedszcxbwjpfx Adrocn

Condition: used, axle configuration: 3 axles, first registration: 01/2016, color: other, Year of construction: 2016, Empty weight: 4.861 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm Dcodpfx Ajzva Udsdron We have the possibility to stack trailers!

Condition: ready for operation (used), Mitsubishi Electric MELFA RV-13FM-D1-S15 industrial robot SN: FK612018R, used, in good condition, fully functional, supplied as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! The following components are also available in our shop: Controller "Mitsubishi Electric MECHA CR750-07VLD1-1-S15" / Connection cable "Mitsubishi Electric BKO-FA0741H07-D" / Connection cable "Mitsubishi Electric BKO-FA0739H07-D" Dcodpfex Dw Nusx Adrjn