Used Theodolite Tripod for sale (55)

Condition: used, GOM - ATOS III Rev.02.1 - 3D Measuring Device Condition: Used, very good. Technical specifications: Camera system: 2 x 8,000,000 Camera pixels: 2048 x 2048 pixels (approx. 4 megapixels) Measuring field sizes XYZ: 150 x 150 x 100 mm up to 2000 x 2000 x 2000 mm Measuring point distance: 0.075 mm to 1.0 mm Scan time: approx. 2 seconds Measuring volume: 700 series (incl. calibration plate) Blue light technology: Precise measurements independent of ambient lighting. Includes computer equipment and USB dongle Software version: 2023 Gujdsxurmcopfx Abfjf Includes Tritop System (camera, 2x 1m reference scales, license) All in original cases With tripod, PC, rack, monitor, small tools, reference points, 1x probe Plug in and start working immediately…

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 60766, API Radian R20 Laser Tracker – a professional 3D measurement system For sale is a professional 3D laser tracking and measurement system, the API Radian R20, used in industry, quality control, automation, robotics, and industrial metrology. The device is fully functional, ready for use, and comes from the equipment of a research and development company. The tracker was used in industrial conditions as intended. Technical data: Manufacturer: API – Automated Precision Inc. Model: Radian R20 Serial number: 60766 Year of manufacture: 2016 Measurement range: 20 m Technology: Laser Tracker 3D The set includes: API Radian R20 Laser Tracker controller / control unit SMR reflector tripod tracker transport case accessory transport cases cables and accessories as shown in the photos Technical condition: The device comes from the equipment of a research and development laboratory. The technical and visual condition corresponds to the product photos. Before sale, the equipment undergoes technical verification. Guodpezila Sjfx Abfof Commercial information: The product is covered by a start-up warranty. If you have any questions or need additional information, please send a message or contact us by phone.

Condition: used, Laser Stereo Camera Factory refurbished with warranty The Leica BLK3D is a photo-based measurement solution. Each photo captured is a complete measurement report containing height, width, and depth measurements. Measurements can be created at any time, immediately on-site using the handheld BLK3D imager or at any time afterward using the BLK3D desktop software. The BLK3D device combines a calibrated stereo camera, measurement sensors, software, and integrated edge detection capabilities to perform in-image measurements with professional accuracy. Each captured image is a complete and precise 3D measurement report. Stereo Camera: Gsdpfjv Ntbbsx Abfeuf Field of View 80° Focal Length 4 mm Aperture F 3.0 2x Synchronous LED Flash Intuitive Android Operating System 65 GB Storage; Space for thousands of digital images Fast data transfer via USB-C and Wi-Fi Rechargeable battery lasts a full day 180 x 77 x 27 mm 480 g Laser accuracy Accuracy under favorable conditions +/- 1 mm Range under favorable conditions 250 m Availability: Short-term Storage location: Hochheim With tripod adapter With device bag With DST 360 set including DST 360 adapter, TRI120 tripod, shoulder strap, and carrying case

Year of construction: 2018, condition: new, Demonstration machine Year of manufacture: 2018 With full warranty Features and technical data: Functionality · Room geometry capture via laser measurements · Total station function: standard measurement points can be augmented by custom measurement points · Complex 360° panoramic capture from each room scan · Image and measurement functions for every detail · Complete photographic documentation · Preview panorama display via HottScan app · Data transfer via USB stick or WiFi with app Technical Data Overview Angle meter features Measurement range: Horizontal 347°, Vertical 180° Accuracy: 0.01°, relative Laser distance meter features Type: Coaxial, visible red laser Measuring range: 0.05–80 m Laser class: 2 Laser type: 650 nm; < 1 mW Laser spot diameter (at distance): 5 m: 4 mm; 10 m: 8 mm; 50 m: 28 mm x 14 mm Accuracy: +/- 1 mm, depending on distance, surface & light conditions Operation User interface: Control panel with soft-touch keys and LED lighting/Display of battery capacity/status and error indicators Data exchange Flash memory: 32 GB, USB and WiFi Range: 50 m (depending on environment) Power supply Power adapter: 14.8 V, 1.2 A, with a cut-off voltage of 16.8 V, primary voltage 100 V – 240 V, 19.5 VA, 50/60 Hz Battery: operating range between 11.2 V and 16.8 V Runtime: Up to 11.5 hours, depending on use of LED lighting; approx. 8 hours under typical use Guodpfx Aow I Uizsbfof Environmental Conditions Operating temperature: operation and battery charging: +0° to +40° C Storage temperature: -20° to +50° C Dust and moisture: IP 40 Special Features · Hot Swap: the replaceable battery can be exchanged during operation in just seconds · Integrated lighting assists in poor lighting conditions · Mobility: Lightweight (approx. 4.7 kg) combined with a foldable tripod makes the HottScan HS-1 a compact tool for on-site inspection and maintenance jobs Your Advantages · Mobility (light weight) and long battery life · Avoidance of multiple on-site visits · Battery change within seconds · Free loan device in case of servicing from the 3rd business day Includes HottScan Room Modeler full version Software for generating a 3D room model from scanner data, export of quantity data in CSV format, geometry export in DWG/DXF format with layer structure, and Collada format Performance scope · Simple room modeling from first-person perspective · Export of quantity data in CSV format · Geometry export: DWG/DXF format with layer structure and Collada format with textures; continual post-processing possible in all 3D CAD programs Includes transport case for HottScan 3D room scanner · Weather-, corrosion- and temperature-resistant aluminum sheet · Lid and bottom profiles welded at the seam · 2 stainless steel hinges · 2 lever-lock clasps · Continuous rubber seal providing dust and splash water protection · Temperature resistance from -40°C to +80°C Interior · Egg-crate foam in the lid · Foam insert in the base with product-shaped cut-outs Availability: Short notice Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 25,000 mm, CMM machine manufactured in 2020. This KEYENCE WM c3000 includes a measuring range of up to 25 m and operates within a temperature range of 0 to 40°C. The delivery scope features a camera tripod, laser scanner, handheld tactile probe unit, and various measuring tips. If you are looking to get high-quality measurement capabilities, consider the KEYENCE WM c3000 machine we have for sale. Contact us for further details. Gedjzggw Tepfx Abfouf - Input Voltage: 24 V DC- Input Current: 1.7 A- Measuring Range: Up to 25 m- Operating Temperature Range: 0 to 40°C- Interface Ports: USB, Power Input- Scope of Delivery / Included Components:* Camera tripod with black carrying bag* Laser scanner (WM-P6200 compatible series) and handheld tactile probe unit in a heavy-duty rolling hard-shell transport case* Component accessory box with various measuring tips/styli* Position-tracking magnets for reference points and calibration* Power supply units (AC adapters) and connection cables* Printed technical documentation / instruction manuals- X-axis travel: 25,000 mm- Y-axis travel: 12,500 mm- Z-axis travel: 12,500 mm(based on the specified measurement volume of 25 m × 12.5 m × 12.5 m)

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, A laser marker that can operate anything? Indeed! This is the Wattsan UV TT, an ultraviolet marker that works with a variety of materials, including leather, ceramics, glass, rubber, wood, leather, fabric, gems, organic and electrical components. The Wattsan UV TT is suitable for QR-codes, bar-codes, data and time, and any other images. This marker can operate big workpieces; the scanning tripod can be taken off and placed on the deck. Additionally, you may alter the machine's functionality by just switching out the lenses! You can give our managers a call for additional details! Wattsan UV TT machine characteristics: Working area: from 75x75 to 300x300 mm Laser power: 3/5/10/15 W Machine size: 880x420x1000 mm Packing size: 960x500x1100 mm Weight: 82 kg Laser sourse: JPT Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. Gujdpfsr D Ngtsx Abfjf YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, A laser marking machine is an invaluable part of a production. Wattsan FL TT can mark or engrave QR codes, serial numbers, dates, and any picture you want onto items. This laser marker works with metals and their alloys. Plastic, fabric, leather, glass, and other materials are also within reach of a laser. The marker’s tripod can be removed and mounted on the ceiling, allowing you to operate work items of any size! Wattsan FL TT comes with the EzCad system, which allows you to edit text in real time. It also supports vector, bitmap, BMP, PLT, CDR, DXT, and AI formats, among others. You can give our managers a call for additional details! Wattsan FL TT characteristics: Working area: 300x300, 110x110, 200x200 mm Laser power: 20-100 W Machine size: 740x400x740 mm Packing size: 820x490x850 mm Weight: 54 kg Laser sourse: RAYCUS, JPT (MOPA), IPG, MAX Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. Gusdpfxjh Uc Dbs Abfjf YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, We are selling our Keyence XM because we are acquiring a larger machine. The device has been used regularly, but it is too small for our applications, so it is practically like new and in perfect condition. Gsdpfx Abezfik Hefeuf The device is fully equipped and comes with an extension and a tripod.

Condition: used, mileage: 26,914 km, power: 200 kW (271.92 HP), first registration: 11/2019, overall weight: 40,000 kg, fuel type: diesel, empty load weight: 16,500 kg, fuel: diesel, brakes: engine braking, driver cabin: other, gearing type: other, emission class: euro6, Year of construction: 2019, operating hours: 931 h, Equipment: ABS, additional headlights, air conditioning, differential lock, fog lights, immobilizer system, navigation system, seat heater, second-hand vehicle warranty, trailer coupling, Chassis configuration * VarioPilot (Right/Left steering switch) Gedpfx Abezcfygsfsuf * Model series: Utility vehicle * Weight variant 16.5 t (7.5/9.5) * Scope of delivery, Germany * Vehicle for right-hand traffic Recommended scope of delivery * Digital tachograph, 2nd generation ADR * Tachograph manufacturer: VDO * First aid kit * Warning triangle and warning light * Pre-installation for toll collection Engine * High Performance Engine Brake * Coolant quick cleaning system Clean-Fix * Engine PTO incl. front PTO * PTO speed limitation Transmission * EasyDrive (Hydrostatic drive) (SN) * Transmission oil cooler Axles * Differential lock, front axle * Axle bridge variant Euro 6 * Reinforced wheel hub * Reinforced steering components on the axle side * Axle ratio I = 6.377 Wheels & Tires * Steep shoulder rims 11.75X22.5 ET 135 Frame & Frame components * Side protection * Mounting brackets, rear * Front mounting plate DIN76060, Type B, Size 3 * Fuel tank 250 l, left, aluminum * Trailer coupling, large hook, ring, pin 38.5 * Increased trailer load, maximum 20t Braking system * Trailer brake, 2-line Cab exterior * Transparent exterior sun visor * Windshield, clear, heated * Red/white reflective warning stripes Cab interior * Air conditioning system * Activated carbon filter * Suspension seat with air suspension, passenger * Suspension seat with air suspension and seat heating, driver * Additional steering column switch, left * Holder, universal, for control panel Electrical system / Electronics * Battery main switch on the battery box * ABS trailer socket 24V, 7-pole / 5-pin * Trailer socket 12V, 13-pole * Front socket 24V, 7-pole * Reverse warning * Equipment socket 32-pole * Continuous power sockets 12V (C3), 12V and 24V, center console * On-board socket 24V/25A in the cab, with C3 signal * Front camera * Rear view camera * Generator 28 V / 150 A * Monitor for camera system * Universal electrical interface according to EN16330 * Immobilizer with transponder * CD radio, Bluetooth * Fog lights, halogen * Work lights, cab rear wall, top * Step lights in the entrance area * Warning lights, LED, yellow, left and right, with tripods * Additional headlights, adjustable, A-pillar Hydraulics * Hydraulic connection, rear, 4-way, cell 1+2 * Pressure line, rear, for 2nd hydraulic circuit * Separate return line, rear * Hydraulics for tipping device Superstructure * Platform subframe Additional scope of delivery * Fire extinguisher, 2 KG * Instruments/signs/printed matter, German * Tire inflation hose with pressure gauge Other * Combination cylinder 12/16 * Axle mounting variant Euro 6 * Synthetic oil (HA) * Haldex air disc brake * Pre-installation, cab for mowing door/mowing seat, right * Coupling flange Ø150mm (instead of 120mm) * Hydraulic system, 2-circuit, 3-cell, full check, snow plow relief * Compression stage (6) 2 * Compression stage (7-8) 12 Chassis LL Other: * Trade-in and purchase of vehicles and machinery possible. * Selling price excluding transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes, and prior sale. * Offer subject to change. * Photos may vary. Price applies to the existing condition. * All information without guarantee.

Condition: used, mileage: 48,984 km, power: 130 kW (176.75 HP), first registration: 11/2018, fuel type: diesel, empty load weight: 7,490 kg, overall weight: 21,490 kg, tire size: 335/80 R20, fuel: diesel, brakes: engine braking, driver cabin: other, gearing type: other, number of seats: 2, Year of construction: 2018, operating hours: 2,990 h, Equipment: ABS, additional headlights, air conditioning, all wheel drive, differential lock, navigation system, seat heater, second-hand vehicle warranty, trailer coupling, Direct contact/used vehicles and equipment: * A1W Differential lock, front axle * AZ5 Axle ratio I = 6.527 * B5B Trailer brake, two-line system * B89 Low-pressure braking system * C7H Side guard protection device * CA4 Rear mounting brackets * CD2 Mounting components for spreaders on platform body * CP3 Front mounting plate DIN 76060, Type B, Size 3 * D6F Air conditioning * DF3 Air-suspended driver’s comfort seat with seat heating * DG1 Additional left-hand steering column switch * DH3 Universal mount for control panel * E33 Battery master switch at battery box * E42 13-pin 12V trailer socket * E45 7-pin 24V front socket * ED2 12V (C3), 12V and 24V constant power supply sockets, center console * ED6 24V/25A cab socket with C3 signal * F6B Heated clear windscreen * G34 EasyDrive (hydrostatic drive) (SN) * G97 Transmission protective plate * H43 Tipping cylinder * H55 4-way hydraulic coupler rear, cells 1+2 * H58 Second hydraulic circuit pressure line rear * H59 Separate return line rear * HE1 Tipper hydraulics * HN6 2-circuit, 3-cell full-tested hydraulic system with snowplow relief Gusdsyfdvfjpfx Abfjf * IB1 Implement carrier series * J48 Warning light for telescopic cylinder * JV5 Preparation/cabling/antenna for radio * K3T AdBlue tank, 25 liters * L60 Entry lights in access area * LB3 LED beacon, yellow, left, with tripod * LL6 Height-adjustable auxiliary headlamps * M1I Engine OM934, inline 4, 5.1 L, 130 kW (177 hp), 750 Nm * M5M Euro VI engine version with OBD-C * M5V High Performance Engine Brake * N08 Engine PTO including front PTO * N09 PTO speed limiter * P60 Subframe for platform body * PB6 Platform body, internal dimensions 2385 x 2075 x 400 * Q94 Trailer coupling, large jaw, ring-type, 38.5 mm pin * RT2 Low-bed rims 11x20 * S8A First aid kit * SC4 Retroreflective red/white warning stripes * SV2 Warning triangle and beacon * TA2 7.49 t weight variant (4.4/4.8) * VB7 Unimog implement carrier series * WJ1 Additional weight variant, 11.0 t (5.5/6.0) * X4H Instruments/decals/manuals in German * XG3 2nd and 3rd year warranty up to max. 4500 operating hours * Z01 Left-hand drive vehicle * Z5Y Vehicle for right-hand traffic * Z96 Provision fee * ZL9 Delivery specification not included, registration to be checked * ZS6 Auxiliary controller trigger Other: * Trade-in and purchase of vehicles and machinery possible. * Sale price excludes transport and delivery. * No liability for printing or typographical errors. * Subject to error, change, and prior sale. * Non-binding offer. * Photos may differ. Price applies to current state. * All information without guarantee.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, warranty duration: 3 months, OFFER FARO QUANTUM 2.5E + SCAN HD Quantum E 2.5m 7 Ejes Serial No W25-E5-17 Model 2100 Volumetric 50m Gedpfxjvvt N Es Abfjuf Quantum M 2,5m 7 axis includes Arm with Bluetooth and Wireless technology, calibration kit, base, plate, 3mm probe, 6mm cables, heavy-duty case, rechargeable bat Polyworks inspector Standard Package, the universal 3d metrology software platform for dimensional inspection, node-locked license. 2023 (no Mantenimiento) Calibración ENAC, basado en la norma ISO 10360-12:2016 Opcional 8 AXIS + POLYWORKS 2023 + TRIPODE

Condition: good (used), Year of construction: 2010, saw blade diameter: 250 mm, overall weight: 130 kg, input voltage: 380 V, coolant pump power: 100 W, Huvema HU250 DV cold circular saw for sale Manufacturer: Huvema Type: HU 250 DV Year of manufacture: 2010 Voltage: 400 V 50 Hz Mounted on a tripod, rotating head, quick clamp. Guedpfx Abotwdviofjf 2-speed motor Liquid cooling with pump Dimensions of the saw blade: 250 x 32 mm Cutting capacity 45° straight: 50 x 60 mm Cutting capacity in a 45° circle: 65 mm Cutting capacity 45° square: 55 mm Cutting capacity 90° straight: 55 x 95 mm Cutting capacity in a 90° circle: 70 mm Cutting capacity 90° square: 70 mm Dimensions: Height: 150 cm Width: 60 cm Length: 90 cm Weight: approx. 150 kg

Condition: like new (used), Year of construction: 2024, operating hours: 120 h, functionality: limited functionality, For sale is a high-quality digital microscope, the KEYENCE VHX-7000 – a fully integrated system for material analysis, defect analysis, quality control, research, and industrial inspection. The VHX-7000 combines ultra-high-resolution 4K imaging with intuitive operation and advanced measurement functions, including automatic focus stacking, image stitching, 2D/3D measurements, and multi-angle observation. As one of the world's first digital 4K ultra-high-precision microscopes, the system delivers exceptional image quality at SEM level while combining the speed and ease of use of optical microscopy. Included configuration: Main system: KEYENCE VHX-7000 Controller Unit Camera: KEYENCE VHX-7020 High-Performance Camera Optics & Adapter: KEYENCE VH-Z20T Zoom Lens / Objective (20x–200x) KEYENCE VH-K20 360° Multi-Function Side View Adapter KEYENCE VHX-20T Tripod Adapter Mechanical components: KEYENCE VHX-S750E Motorized XYZ Stage (40 mm) Software & Accessories: KEYENCE VH-H5M 3D Measurement Software KEYENCE VHX-A70D Console for the VHX-7000 Swiss power cable/adapter Original manuals Key features: 4K Ultra-HD imaging Seamless magnification from 20x to 6000x Fully motorized operation Gjdpfx Absy U Iy Ijfsuf Multidirectional lighting Real-time 3D and roughness analysis Automated focusing and positioning User-friendly touch operation Ideal for industrial inspection, electronics, materials science, metallurgy, and R&D laboratories

Condition: used, Year of construction: 1994, Technical details: tank capacity: 150 l operating pressure: 11 bar dimensions L x W x H: Ø 550 mm x H: 1,2m weight: ca. 60 kg For sale as shown and described, as an unpressurised tank for a sale at low price. Condensation drain valve at the bottom with hand lever 2 connection pieces 1/2 inch 2 connection pieces on the ceiling side 2 inch with blind plugs Boiler/tank Ø 450 x 1000mm upright on tripod stand Temperature max. +50°C / min. 10°C Godpfju Nz Tijx Abfouf pressure gauge *

Condition: good (used), Year of construction: 2022, Equipment: type plate available, Technical Data - KEYENCE WM 3000 Additional Equipment - Measuring head WM 3000 - USB cable - Power supply - Measuring probe WMP3000 - Probe tip Ø 5 mm - Calibration device - Tripod Gedpow Sviqjfx Abfouf - 3D-CAD additional software - Transport case - 4x batteries for measuring probe

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, pipe diameter (max.): 35 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 360 °, bending radius (max.): 150 mm, bending radius (min.): 32 mm, overall weight: 28 kg, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room Godsnfvx Nopfx Abfjuf - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: like new (used), Year of construction: 2021, Keyece Lasertracker WM 3000, year 12/2020 Complete with notebook and handheld probe. Gedpfxoy Nx Hhs Abfjuf Includes tripod and carrying case.

Condition: used, This listing is for the Churwell PBI air sampler SAS Super with case and charger The unit is in full working condition and is ready for immediate use Churwell PBI Air Sampler SAS Super 100 L with Case and Charger The Churwell PBI Air Sampler SAS Super 100 is a widely used microbiological air sampling device designed for cleanrooms, pharmaceutical environments, operating theatres, and laboratories. It enables reliable air monitoring by collecting air-borne microorganisms onto contact plates or Petri dishes. Gsdpoxv Dpxsfx Abfsuf Key Features: Sampling Principle: Designed to collect airborne microorganisms on microbiological agar by impaction, produced through controlled air aspiration. High Sampling Efficiency: The SAS Super models—such as the SAS Super 100 and SAS Super 180—can collect particles down to 1 micron. The SAS Super 100 offers a sampling rate of 100 liters of air per minute. Digital Control: Features a digital interface for setting sampling volume, duration, and storing operator information. Battery-Powered: Equipped with a rechargeable battery, allowing for multiple sampling sessions on a single charge. Comes with a charger included. Portability: Lightweight and easy to carry with a protective case, ideal for field use or portable cleanroom monitoring. Technical Specifications: Air Flow Rate: 100 liters per minute Dimensions: 10.5 × 11 × 29 cm Weight: 1.75 kg Data Management: Some models support data logging and CFR 21 Part 11 compliance (varies by version) Materials: Typically stainless steel or autoclavable materials for sterile environments Accessories and Options: Aspirating heads (stainless steel or disposable) Tripods and stands Calibration adapters USB data cable (for models with digital logging)

Condition: used, This listing is for the Hund Wetzlar H600/12 Microscope The unit is in full working condition and is ready for immediate use The Hund Wetzlar H‑600 series is a line of high-quality laboratory upright compound microscopes manufactured by Helmut Hund GmbH, a German optical instrument maker that later absorbed the traditions of Will Wetzlar—a well-respected older Wetzlar-based manufacturer These microscopes are tailored for laboratory, educational, clinical, and research use. They are known for their robust mechanical build, ergonomic design, and optical clarity—making them reliable and long-lasting instruments Key Features Across H‑600 Variants Here’s a breakdown of typical configurations and options in the H‑600 series: Feature Description Stand & Mechanics Solid cast‑iron tripod, coaxial coarse/fine focusing (fine ~2 µm), 160 × 130 mm mechanical stage, 5‑position ball‑bearing nosepiece Guedpexhfdzofx Abfjf . Optics & Contrast Methods Supports brightfield, darkfield, phase contrast, and select models include incident fluorescence illumination Tube & Eyepieces Binocular tube, typically 30° viewing angle, with wide-field eyepieces (e.g., 10×/18 or 10×/20) Objectives Plan or achromatic objectives: 10×, 20×, 40× phase, and 100× oil immersion (numerical apertures e.g., 0.65, 1.25) Illumination Integrated 12 V / 30 W halogen lamp with continuous brightness control; some models also include HBO fluorescence or LED options Accessories Often include centering keys, filter sliders, spare bulbs/fuses, dust covers, and optional filters or conversion accessories .

Condition: used, functionality: unexamined, machine/vehicle number: C320, Used Sokkia C320 Level – Surveying instrument with accessories Description: Automatic level Sokkia Manufacturer: Sokkia Model: C320 Guodexiw Dijpfx Abfef Complete with new tripod (in box), extendable aluminium measuring rod, level in original case with manuals and accessories.

Condition: new, tube diameter 1/2 - 2.0 Zoll wall strength 2.75 - 4.5 mm ST pressure 10.0 t weight of the machine ca. 46.0 kg With a hinged bending frame for efficient work - Various bending dies included - Universally applicable for gas, boiler, and water pipes - Fast work thanks to rapid feed - With a tripod stand for safe work Gjdpfx Asxaac Njbfsuf - Also ideal for copper and coated pipes - Bends up to 90° can be created Features: - Bending dies: ½" - ¾" - 1" - 1 ¼" - 1 ½" - 2"

Condition: new, weight max. 1000 Kg workpiece diameter 20 - 800 mm drum diameter 200 x 50 mm feed 50 - 2000 mm/min weight 65 kg total power requirement 0,6 kW Gsdjk Dvhdopfx Abfjuf dimensions of the machine ca. 0,8 x 0,6 x 0,6 m roller block - Torch tripod - Speed infinitely variable - foot switch - User manual in English

Condition: new, table diameter 315 mm 50 Kg 25 Kg chucking diameter 200 mm turning speeds 0 - 5 stufenlos swivelling range 90 Grad tilt adjustment: manually/mechanicall manuell connected load frequency 230 V weight of the machine ca. 45 Kg Gedpfx Aboi Hg I Defsuf dimensions of the machine ca. 800 x 600 x 600 m welding turntable with - With integrated tripod and universal welding torch holder - Quick chuck 200mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Condition: new, weight max. 1000 Kg workpiece diameter 20 - 800 mm drum diameter 200 x 50 mm feed 50 - 2000 mm/min weight 65 kg total power requirement 0,6 kW dimensions of the machine ca. 0,8 x 0,6 x 0,6 m roller block - Torch tripod Gedpfx Absvn U E Sofjuf - Speed infinitely variable - foot switch - User manual in English

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Mobile 3D coordinate measuring machine - Flexible 3D measurements at any location Image guided 3D coordinate measuring machine Keyence Measuring System WM-3000 Coordinate Measuring System XM-2000, XM-1600 Digital Inspection Station TECHNICAL DETAILS camera chip: 4 MP CMOS Measuring range: 600 x 300 x 200 mm Smallest display unit: 1 µm Smallest angle: 0.0001 Repeatability (locked): +- 3 µm Table load: max. 25 kg Display: 15" TFT Initial purchase: 12/2020 Coordinate measuring system Measuring head: WM-3000 Camera tripod: WM-S1 Tripod extension / stand for measuring head: WM-EX1 Measuring software: incl. laptop Additional software 3D-CAD import/export: WM-H1C WM Battery charger: WM-BC1 Probe battery: WM-B1 Stylus: OP-88422; 2.5 mm Mouse: WM-M30D User manual: German Euro AC power cable: OP-99032, OP-99033 Attachments for camera realignment: OP-88546 Calibration cone for needle probe: OP-88547 Magnets for attachments camera realignment: 972344 Gjdepz Ityepfx Abfeuf Digital test station measuring head: XM-2000 Digital test station control unit: XM-1600 Additional software 3D-CAD import/export: XM-H1C XM Mouse, Keyboard: XM-M26E User manual: English AC power cable: OP-99031 MACHINE DETAILS Main electrical connection: 24 V Weight measuring head: 25,0 kg Weight tripod: 4,5 kg Weight extension: 4.0 kg