Used Trejon Winter Service Equipment for sale (51,034)

Condition: used, Year of construction: 2021, number of beds: 2, _____Basic equipment:Base frame for mounting on carrier vehicle with technical compartment for protected storage of components- 60001 GRP safety tank with baffle walls- 6-cylinder piston diaphragm pump with hydraulic drive from vehicle min. 40 l/min incl. 21/2" suction fitting with external suction via Storz C-coupling and pressure switch fitting- Spray bar with 1" stainless steel nozzle line mounted at the rear, incl. tip protection in front of spray bar- Manually operated triple nozzle holder for turning with 3-fold nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling and pressure switch fitting Manually operated triple nozzle holder for turning with triple nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling- Low-level drain tap with Storz C-coupling- Mechanical fill level indicator- Electro-pneumatic pressure filter flushing- Plug-on RKL at the rear- Position lights on spray bar left and right: front white, rear red- The nozzle carrier can be switched on and off pneumatically to prevent dripping- The application rate is controlled and monitored fully automatically via a Spray-Dos computerMore equipment:- Draw hook: base frame as draw hook design- Spray bar can be folded up- Spray bar 2.50 m- Pump capacity 320 l/min 2 1/2" suction filter Dodpfsuw Dnxsx Akmewc

Condition: used, Year of construction: 1996, Suitable for (model): Unimog, truck_____We are selling 1 used Schmidt snow plow CP 3 with sliding shoes, lighting, and hydraulic swiveling left/right. Further information available upon request. Location: 93095 Hagelstadt. Dedoyq Aq Sopfx Akmowc

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 36 h, On behalf of a customer: City Ranger 3070, like new, only 36 operating hours, cab, air conditioning, Isri luxury seat with seat heating, front sweeper reduced to 122 cm, spreader, cruise control, etc. Has not been used for winter service yet. Only €82,000.00 plus VAT. Available immediately. Djdpfx Asx N Ayfokmswc

Condition: used, Year of construction: 2024, _____Basic equipment: Frame with ploughshare Hydraulic swivel device left-right Hydraulic installation with quick hydraulic couplings in accordance with DN10-ISO7241-1A Curbstone deflector left-right Three-point attachment plate CAT 2N, 2 and 3N in two mounting heights / for MG-150 to -210 CAT 1N, 1 and 2N OR municipal attachment plate F1, F2 in accordance with EN15432-1:2011 (formerly DIN 76 060, size 3) with lifting system for tension-free lifting and lowering Pressure relief valve Cylinder in strong design, double-acting Pendulum compensation up to 18° Adjustable skids Attachment device screwed Warning flags with holder Parking foot Municipal paint RAL 2011Special equipment:Equipment subject to surcharge:Euro mountWheelsLED lightingPU scraper barsAlso available as a three-point attachment!Price from 7,013.00 (net)The picture serves as an example, can contain special equipment.,Storage location:null Dedpfx Akju Ebkmjmowc

Condition: used, functionality: fully functional, fuel type: diesel, axle configuration: 8x2, maximum load weight: 26,000 kg, fuel: diesel, emission class: euro5, Year of construction: 2010, machine/vehicle number: YV2VH80D9AB566699, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, This ready-to-use combination comes complete with: Schmidt Stratos B90-42 PCLN 700 wet salt spreader (9m³ capacity) and Schmidt SNK34 snow plough with 300 cm working width. Low mileage! Vehicle is located in Bogdaniec, Poland. Dwodpfsx Nn I Isx Akmjc

Condition: new, Year of construction: 2026, RPS-1500 The RPS-1500 self-contained sand-and-salt spreader from TISAV is the ideal piece of equipment for the effective spreading of de-icing materials on roads and pavements, minimising the need for manual labour and significantly reducing the risk of accidents and personal injury. The spreader is fitted with a 1.5 m³ hopper featuring a scraper-chain feed mechanism and a disc for spreading materials. Thanks to its self-contained design and compact dimensions, it can be used with any vehicle. SPECIFICATIONS: • Spreading width, depending on disc speed – 3–6 m • Hydraulically driven mechanisms Dwedpfx Ajt Ifxlokmjc • Disc tilt adjustment (manual) • Mixture feed mechanism – scraper-chain • Proportional control system for disc rotation speed via the control unit in the driver’s cab (optional) • Equipment controlled via a control panel from the driver’s cab. • Features its own wheelbase, or can be mounted on the customer’s vehicle.

Condition: new, functionality: fully functional, color: orange, empty load weight: 2,200 kg, brakes: other, gearing type: other, emission class: none, loading space length: 5,745 mm, loading space height: 2,821 mm, Year of construction: 2026, Equipment: additional headlights, hydraulics, TICAB RPS 9000/6000 (9 m³) Sand & Salt Spreader | Heavy-Duty Winter Road Maintenance Equipment Engineered for productivity and durability, the RPS 9000 provides uniform spreading performance even in extreme weather conditions, helping maintain safe and accessible roads throughout the winter season. The TICAB RPS 9000 is a high-capacity, professional-grade sand and salt spreader designed for efficient winter road maintenance, snow and ice control, and anti-icing/de-icing operations. Built for demanding conditions, it ensures reliable performance on highways, municipal roads, airports, parking areas, and industrial surfaces. Key Advantages ✔ Large 9 m³ hopper capacity for long, uninterrupted operation ✔ Hydraulic scraper-chain feeding system ensures stable and consistent material flow ✔ Disc spreading system for precise and uniform salt/sand distribution ✔ Adjustable spreading width from 4 to 8 meters ✔ Optional autonomous engine for independent operation ✔ Optional cab-controlled proportional disc speed for enhanced precision ✔ Quick mounting system for fast installation on trucks ✔ Heavy-duty construction designed for harsh winter environments Applications • Winter road maintenance and snow control • Airport runways and taxiways • Anti-icing and de-icing operations • Highway and municipal street maintenance • Parking lots and logistics centers • Industrial and commercial территории Built for Professional Winter Operations The TICAB RPS 9000 is designed to meet the demands of modern winter maintenance fleets. Its high-capacity hopper and precise spreading system ensure efficient material usage, reduced operating costs, and improved road safety under snow and ice conditions. Why Choose TICAB RPS 9000? • High productivity with large working capacity • Reliable performance in extreme weather conditions • Precise and uniform spreading quality • Flexible truck-mounted design • Ideal for municipal and highway winter service fleets Request a Quote Today Contact us for pricing, delivery options, and full technical specifications. The TICAB RPS 9000 is available for fast production and worldwide shipping. Djdpfsx Uwp Eex Akmewc

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 44 h, Winter service vehicle EGHOLM Park Ranger 2155 with warranty, cabin, reversing camera, heated mirrors, LED headlights, air-suspended seat Cobo SR 840, adjustable backrest, cup holder, liquid wax coating, DAB+ radio, front sweeper shortened to 1 meter outer width of the machine, all-wheel drive, spreader, parking support. Immediately available, only 44 operating hours. Price: €49,900.00 plus VAT. Djdpfez I Hlqox Akmowc

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc - Automatic dry material reduction - 2 side salt tanks and 1 center tank - Tank capacity approx. 820 liters - Stainless steel spreading disc, 8 m spreading width - Screw couplings - Cable separation Dwodpfx Ajzf E Dvskmjc - Folding roof - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics * Wet salt system mounted on the spreader Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Advantages of KUGELMANN mounted spreaders: - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to the rear - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Condition: new, functionality: fully functional, color: orange, brakes: other, gearing type: mechanical, emission class: none, suspension: hydraulics, Year of construction: 2026, Equipment: additional headlights, fog lights, hydraulics, low noise, onboard computer, traction control, TICAB Sand & Salt Spreader RPS 1500 | 1.5 m³ – Professional Winter Road Maintenance & De icing Equipment Featuring a 1.5 m³ hopper, hydraulic drive and efficient brush chain feed, this spreader delivers uniform distribution of salt, sand, grit, and other anti skid materials, helping municipalities, contractors and road services maintain safe roads, sidewalks and pavements throughout the cold season. The TICAB RPS 1500 is a high performance sand and salt spreader engineered for winter road maintenance, snow and ice control, anti icing, de icing, and surface safety operations. Key Features • Spreading width: 3–6 m (varies with disc speed) for broad winter coverage • Disc spreader with adjustable tilt for optimized salt and sand dispersion • In cab control panel with optional proportional disc speed control • Hopper capacity: 1.5 m³ for extended operation without frequent refills • Hydraulic scraper chain feeding system for reliable material delivery • Can be mounted on a trailer or customer truck chassis for versatile use Applications Dwsdpfx Ajx Uql Hjkmjc • Winter road de icing & anti icing spreading • Municipal street, highway & urban pavement treatment • Sidewalks, parking lots & industrial surface maintenance • Sand, salt & grit spreading for traffic safety Why Choose TICAB RPS 1500 It’s a cost effective choice for municipalities, winter service contractors, and road maintenance fleets. The TICAB RPS 1500 delivers compact design, high efficiency, and reliable performance — reducing manual labor, improving safety, and increasing productivity during winter road service, de icing, and anti skid applications. Contact us for price, delivery options, and full technical specifications. Get ready for safe winter roads with TICAB!

Condition: excellent (used), functionality: fully functional, power: 47.81 kW (65.00 HP), fuel type: diesel, fuel: diesel, Year of construction: 2019, Equipment: all wheel drive, HOLDER C65 SC Municipal implement carrier with winter maintenance equipment Equipment included: Dodoxbf Nkopfx Akmjwc 1. FIEDLER KVS-1205 wedge vario snow plow with a maximum clearing width of 120 cm 2. FIEDLER FSSA-650 brine silo spreader with control panel 3. FIEDLER FKM-1310 front-mounted snow sweeper This HOLDER C65SC implement carrier was first commissioned in 2019, has only 88 operating hours according to the meter, and is in well-maintained overall condition with the usual signs of use and wear for this equipment class. Recent service completed. - Net price: €57,900 // Gross price: €68,900 - Viewing / test drive possible by arrangement - Nationwide shipping can be organized; shipping costs depend on distance. - We are happy to provide you with an attractive leasing or financing offer through our leasing partner!

Condition: used, Year of construction: 2024, _____Basic equipment: two ploughshares mounted on the frame with king pin Collision protection via spring flaps Center pin secured against accidental triggering Hydraulic swivel device left-right Hydraulic installation with 4 quick hydraulic couplings and 1 unpressurized return connection Kerb deflector left-right Three-point mounting plate CAT 2N, 2 and 3N Overpressure valve Double-acting swivel cylinder Pendulum compensation up to 8° Adjustable sliding skids Central sliding skid with PU foot Spacer block for 40° end stop angle Municipal paint RAL 2011 Warning flags with holder LED lighting (only from 260 to 340) Steel scraper barOptional equipment:Three-point linkage Cat IIBoundary lights Selector valve for synchronous control 12 VSteel scraper barPicture serves as an example,Location:null Dwjdpfx Aeu Hv Szjkmsc

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, Used equipment – in very good condition Kugelmann Articulating snowplow blade Type: B140/67 Dedozdt Nwjpfx Akmjwc Blade height (H): 67cm Blade width (W): 140cm Clearing width at maximum inclination (W2): approx. 123cm Year of manufacture: 2020 Price upon request Subject to changes, typing errors, mistakes and prior sale. All information is provided without warranty. The sale is made with the exclusion of any warranty or guarantee.

Condition: ready for operation (used), functionality: fully functional, first registration: 07/2025, overall weight: 1,056 kg, color: orange, operation weight: 1,056 kg, Year of construction: 2001, Snow plough: + Beilhack + Model: PV30-4 + Year of manufacture: 2001 + 360 cm wide + Pin spacing at mount: 635 mm Dodpfx Akswz Ikgjmewc + 4 cutting edges + Steel blade + 1,056 kg Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 13100019, type of input current: three-phase, overall weight: 1,000 kg, For sale: a professional log edging saw (optimizing saw) from the renowned German company Winter Holztechnik, model Optimax 100. The machine is fully functional, regularly serviced, and ready for immediate operation. It is ideally suited for the fast and precise removal of defects and the preparation of elements with fixed lengths in joinery workshops. Key features and advantages: PLC control: Intuitive touchscreen panel for easy programming. Multifunctionality: Capability for sequential cutting (memory for up to 10 dimensions) and cutting lines marked with fluorescent chalk. Efficiency: The machine can replace the work of several people, offering a speed of up to 80 cycles per minute. Precision: Very high cutting accuracy of +/- 1 mm. Technical data: Saw motor power: 7.5 kW. Dedpozzw Ulefx Akmswc Feed motor power: 2.0 kW (feed speed continuously adjustable up to 80 m/min). Cutting height: max. 100 mm. Blade diameter: Ø 455 mm (bore 30 mm). Minimum material length: 300 mm. Power supply/Air: 400V / 8 bar.

Condition: ready for operation (used), functionality: fully functional, mileage: 1,440,000 km, first registration: 11/2026, fuel type: diesel, axle configuration: 4x4, next inspection (TÜV): 08/2026, fuel: diesel, gearing type: mechanical, Year of construction: 2011, Equipment: ABS, air conditioning, parking heater, truck registration, Special equipment: Trailer brake 2 - line, trailer coupling: towing coupling, trailer coupling: G 145, trailer socket 24V / 15-pole, audio system: CD radio (Bluetooth), differential lock front axle, cab variant: S (short with extended rear wall), electric window lifts, heated windshield, graphic info display with eco-meter, air dryer 1 chamber, heated, engine PTO front with tandem pump, parameterizable special module, reversing warning system acoustic (warning signal outside), rear window, seats in cab: driver's seat comfort suspension seat, sun visor outside, stabilizer rear axle reinforced (for extremely high load), stabilizer front axle reinforced, steel rims 11.00x20.0. Additional equipment: Dwjdoza Tc Repfx Akmoc Emission standard EURO 5, axle configuration: 4x4, exterior mirrors electrically adjustable and heated, battery 115 Ah, cockpit distributor, sunroof (steel), differential lock rear axle, cab: tilting mechanism hydraulic, cab: S (short), suspension: leaf / leaf, generator 80 A, transmission 6-speed - type: G 60-6, urea tank (AdBlue): 25 liters, rear axle H 4, crown wheel 410, hydraulic steering gear LS 6 / LS 8, interior filter: pollen filter, body / superstructure: tipper, fuel tank: 125 liters, model update Atego 2, engine 6.4 liters - 175 kW diesel (OM 906 LA), engine start / stop system, engine brake with constant throttle, auxiliary drive MB 2C, auxiliary drive MB 60-2C with MPA, wheelbase 3260 mm, SCR system (AdBlue technology), side impact protection, seats in cab: passenger single seat, fixed, drum brake front and rear axle, underrun protection rear fixed, transfer case - VG 550 - 3W, immobilizer, permissible total weight 13.50 t.

Condition: used, functionality: fully functional, Winter service package for Nilfisk CR3500: + Snow plow Fiedler FRS 1504 180 kg hydraulically adjustable 150 cm wide + Roller spreader hydraulically driven 100 cm wide + Drop-side platform rear tipper aluminium side panels tarpaulin transport frame Dwodpfsxwm E Esx Akmsc + Control panel round connector Get all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: excellent (used), functionality: fully functional, mileage: 1,915 km, first registration: 12/2012, overall weight: 6,045 kg, fuel type: diesel, color: traffic orange, axle configuration: 4x4, maximum load weight: 2,630 kg, empty load weight: 3,415 kg, tire size: 225/75 R17.5, fuel: diesel, wheelbase: 2,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: hydrostat, suspension: parabolic leaf (spring), loading space length: 2,600 mm, Year of construction: 2010, operating hours: 1,915 h, Equipment: ABS, additional headlights, air conditioning, crane, differential lock, fog lights, immobilizer system, parking heater, second-hand vehicle warranty, soot filter, traction control, trailer coupling, Welcome to MGC.pl in Łaziska Górne! Since 1995, we have been involved in the sale of cars, trucks, and machinery. Over the years, we have sold over 6,000 vehicles and machines, gaining experience and the trust of customers from Poland and abroad. We present a multifunctional AUSA M350Hx4 municipal vehicle with all-wheel drive, a tipping body, a Copma loading crane, and a winter road maintenance kit consisting of a Villeton snow plow and a SnowEx V-Maxx 7550 spreader. This vehicle was imported from France and has a low original mileage of only 1905 operating hours. It was manufactured in 2010, put into use in 2013, and first registered on 03/12/2012. This well-maintained unit is free from chassis corrosion and has tires in good condition. Its compact design, with a width of only 170 cm and 4x4 drive, makes it ideal for use on narrow roads, parking lots, housing estates, and industrial sites. EQUIPMENT AND BODY: • All-wheel drive – driven front and rear axles. • Tipping body with opening side gates. • HDS loading crane by Copma, mounted behind the cabin. • SnowEx V-Maxx 7550 spreader with a separate controller in the cabin. • Villeton LT 14 × 22 snow plow with adjustable settings for working straight ahead, to the left, and to the right. • Hydraulic lifting and adjustment of the snow plow. • Control panel for hydraulics and equipment, accessible from the driver's seat. • Floating function of the snow plow – indicated by "FLOAT" on the control panel. • Front hydraulic connections for equipment. • Warning lights on the roof of the cabin. • Warning signs on the snow plow and poles indicating its extreme position. CABIN AND INTERIOR CONDITION: • Enclosed, two-person cabin with a large glass area. • Two separate seats with fabric upholstery and headrests. • Seat belts. • Seat adjustment. • Sliding side windows. • Exterior mirrors. • Windshield wiper. • Vents on the dashboard. • Instrument panel with speedometer, tachometer, and operating parameter indicators. • Central console with switches for controlling equipment. • SnowEx controller with separate adjustment for material spreading and spreader operation. • Rubber floor mat for easy cleaning. WHEELS AND TIRES: • Tire size according to the certificate of conformity: 225/75 R17.5. • Tires marked M+S. • Steel rims. • The photos show a clear tire tread. • The rim is in good visual condition, with no obvious corrosion. • The wheels and tires look good visually; the actual tread depth should be checked during inspection. TECHNICAL DATA: • Make and model: AUSA M350Hx4. • Mileage: 1905 operating hours. Djdpez Hv H Usfx Akmjwc • Engine: Volkswagen, diesel. • Engine code according to the document: CJDA. • Engine capacity: 1968 cm³. • Power: 75 kW / approximately 102 hp at 3000 rpm. • Four cylinders in a row. • Emission standard: Euro 5. • Gearbox according to the certificate of conformity: manual. • Maximum speed according to the document: 61 km/h. • Two axles, both driven. • Front axle is steerable. • Two seats in the cabin. DIMENSIONS AND WEIGHTS: • Vehicle length: 4470 mm. • Width: 1700 mm. • Wheelbase: 2200 mm. • Length of the loading area: 2600 mm. • Rear overhang: 980 mm. • Vehicle weight in ready-to-drive condition: 3415 kg. • Technically permissible total weight: 6045 kg. • Permissible front axle load: 2650 kg. • Permissible rear axle load: 3750 kg.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, For sale is a used WINTER MRS-300 multi-blade circular saw, manufactured in 2013. This machine is suitable for the efficient longitudinal cutting of solid wood, boards, and strips. Thanks to its continuously adjustable chain feed and electric height adjustment, it is ideal for use in industrial or artisanal woodworking applications. The machine features an infeed roller conveyor and automatic lubrication. Technical data: Manufacturer: WINTER / Henrik Winter Holztechnik GmbH Type: MRS-300 Series: New Line Year of manufacture: 2013 Machine number: 13310021 Chain width: 300 mm Cutting height: 10–100 mm Saw blade diameter: 200–350 mm Total connected power: approx. 25 kW Voltage: 380 V Frequency: 50 Hz Working height: approx. 740 mm Table size: approx. 1,530 × 760 mm Continuously adjustable chain feed Electric height adjustment Automatic lubrication Infeed roller conveyor Dust extraction connection Dsdszxxmkepfx Akmewc Dimensions: approx. 2,200 × 1,500 × 1,580 mm Weight: approx. 2,500 kg Equipment: Infeed roller conveyor Multi-blade saw arbor Continuously adjustable feed control Electric height adjustment Central control panel Automatic lubrication Dust extraction hood / dust extraction connection CE marking Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: used, Transport container winter service, for spreader, salt spreader, salt container, grit container, Dwodjf T Sn Depfx Akmoc -Filling device: for road salt, fertilizer, for hand spreader -Bank: made of stainless steel -Transport frame: made of galvanized steel tube -Transport dimensions: 1800/1400/H1265 mm -Weight: 250 kg

Condition: excellent (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, Sheffield HC-810 Automatic Hot/Cold Strip Cutting Machine with PF-33 Automatic Prefeeder For sale: Sheffield HC-810 industrial automatic hot/cold cutting machine, supplied together with the Sheffield PF-33 automatic prefeeder. The machine is designed for precise and efficient cutting of webbing, straps, tapes, ribbons, and other textile materials. The hot cutting function allows synthetic materials to be cut and heat-sealed simultaneously, preventing fraying and ensuring clean, durable edges. The equipment is suitable for industrial textile production, including the manufacture of tactical equipment, belts, straps, bags, backpacks, and other products requiring accurate, repeatable cutting. Main features: * Automatic hot and cold cutting * Maximum cutting width: 6¼ inches (approx. 159 mm) * Electronic control panel * Programmable cutting length * Adjustable feeding speed * Automatic piece counter * Adjustable blade dwell time for thicker materials * Automatic material feeding * Precise and repeatable cutting operations * Suitable for nylon, polyester webbing, straps, ribbons, and similar materials * 220 V version Included equipment: * Sheffield HC-810CE-220V automatic hot/cold cutting machine * Sheffield PF-33-220V automatic prefeeder * Original operating manual * Additional accessories and parts shown in the photographs Automatic feeding system: The Sheffield PF-33 prefeeder facilitates the feeding of material from rolls, ensuring a consistent material supply during automatic cutting operations. The combination of the HC-810 cutting machine and PF-33 prefeeder provides an efficient solution for repetitive industrial cutting tasks, reducing manual handling and improving production consistency. Technical condition: The machine is 100% fully functional, in excellent working condition, and ready for immediate use. All functions operate correctly. The equipment requires no repairs and is ready to be integrated into a production process. The machine is used but remains in very good overall condition, with normal signs of industrial use. Additional information: * Manufacturer: Sheffield Cutting Equipment * Model: HC-810CE-220V + PF-33-220V * Year of manufacture: 2024 * Purchase date: February 2025 * Condition: Used, fully functional Dwsdez Nyv Tepfx Akmec * Availability: Immediately available * Location: Gdańsk, Poland The machine can be inspected and tested by prior appointment. The equipment is offered as a complete cutting and feeding system, including the accessories shown in the photographs.

Condition: good (used), Year of construction: 2020, operating hours: 731 h, functionality: fully functional, machine/vehicle number: WSVT4H7RSL1500083, power: 55.16 kW (75.00 HP), first registration: 09/2020, fuel type: diesel, color: orange, tire size: 255/65 R16, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, Equipment: additional headlights, hydraulics, Model designation: Aebi Schmidt Multigo 150 Year of manufacture: 2020 Serial number: WSVT4H7RSL1500083 Tyres: Wide tyres 255/65 R16 Operating hours: 731 Application areas: Winter service, street cleaning, sidewalk cleaning, and more. - 40 km/h road speed - Front-mounted lift with hydraulic floating position control - Perkins 4-cylinder engine (75 hp) - ISRI air-suspended driver's seat - Heated side mirrors - Rear area monitoring with infrared night vision camera + monitor - Additional LED work lights - 1.5 m³ aluminium debris hopper with recirculating water system - Sweeper unit: 2-brush system (trailing) with suction shaft - 4 m hand suction hose - Stratos S 06 salt spreader (0.6 m³) - Spreading disc with adjustable spreading width from 2–6 m - Snow plough EN15 with 1.5 m working width - Trade-in and purchase of vehicles and machinery possible. - Sales price excludes transport and delivery. - No liability for printing & typographical errors. - Subject to errors, alterations, and prior sale. - Offer subject to change. - All information without guarantee. - No warranty for material defects on used vehicles/equipment. Henne Nutzfahrzeuge GmbH Authorized Mercedes-Benz Unimog general representative JCB sales and service partner Hans-Grade-Straße 2 04509 Wiedemar Dodpfxeyilbne Akmowc Marlon Schütz Sales municipal special equipment

Condition: good (used), Year of construction: 2019, functionality: fully functional, For sale is a high-quality, all-in-one winter combination machine, type 5K 310-2600, manufactured in 2019. This machine combines several processing units in a compact design and is ideal for carpentry workshops, joineries, and demanding woodworking applications. The technical data has been taken from the nameplate. Technical data Manufacturer: Winter Holztechnik GmbH Type: 5K 310-2600 Year of manufacture: 2019 Machine no.: 201904001 Weight: approx. 575 kg Voltage: 400 V / 3 phases / 50 Hz Jointer and Thicknesser Motor power: 2.8 kW Planing width: 310 mm Knife shaft Ø: 70 mm 3 knives Knife shaft speed: 4,800 rpm Removal rate (jointing): max. 4 mm Removal rate (thicknessing): 2 mm Feed speed: 6 m/min Jointing table: 1,380 × 310 mm Thicknessing table: 540 × 306 mm Max. feed height: 235 mm Sliding Table Circular Saw Motor power: 3.8 kW Saw blade Ø: 315 mm Main saw blade speed: 4,500 rpm Cutting width with parallel fence: up to 860 mm Sliding table: approx. 1,260 mm Blade tilt: 90°–45° Spindle Moulder Motor power: 2.8 kW Spindle diameter: 30 mm Working height: 100 mm Speeds: 1,800 / 3,000 / 6,000 / 9,000 rpm Mortising Machine Drill chuck: 16 mm Drill stroke: 140 mm Table size: 500 × 210 mm Max. workpiece length: 1,250 mm Dodpfx Ajzfilwjkmewc Equipment Spindle Moulder Jointer and Thicknesser Mortising Machine Sliding table Angle and parallel fence Compact multi-function machine for space-saving work Transportation possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Assembly table, workbench with tilting mechanism, from 0° (horizontal) to 85°. Length 2900 mm Depth (height) 1600 mm Overall height of the table in the vertical position 2000 mm Roller conveyor length 2000 mm Width 160 mm Dodsz Nm Dwspfx Akmswc Two pneumatic main cylinders for tilting Two foot pedals Four pneumatic short-stroke lifting cylinders at the rear

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 20190824, spindle diameter: 125 mm, total width: 1,600 mm, total height: 1,680 mm, total length: 3,040 mm, overall weight: 2,700 kg, spindle speed (max.): 6,800 rpm, workpiece height (max.): 100 mm, type of input current: three-phase, workpiece width (max.): 180 mm, input voltage: 380 V, table length: 2,000 mm, number of spindles: 4, power: 28.75 kW (39.09 HP), input frequency: 50 Hz, Description: -Solid construction cast iron and welded metal frame -Working table fully cromed to ensure firm advance of materials -side guide rollers for materials with pneumatic driving -professional cardan transmission for the feed system -feed speed up to 33m/min mechanically adjustable with mechanical variator with with elastic pulley -manual central lubrification pump -radial and axial adjustment of the working axes with mechanical displays for precise positions -electrical adjustment of working thickness -ergonomically positioned contro panel according UE standard -Hours:200 hours Dwedpfxoz E H H No Akmjc -Technical data: -electric connected load-21 kw -operating voltage:400v,50hz,3 phase -air required pressure:min 6bar -dimension: 3040x1600x1680mm - -weight:2800 kg -food table length:2000 mm -steplessly adjustable feed speed 8-33 m/min -axes diameters:40 mm - Ax1 - down: Ø125mm (Ø152mm channel cutter), 4kW -Ax2 - right: Ø115-170mm, 4kW - Ax3 - left: Ø115-170mm, 4kW - Ax4 – up: Ø105-150mm, 5,5kW -axis rotation:6800 rpm -advance engine power:3kw -dimension rolling advance: Ø140x35x50 mm -exhaustive dimension: 4x120mm Technical data of the material: -materials width: 20-180mm -material thickness: 8-100mm