Used Trumpf C160-2 Plus for sale (78,593)

Condition: used, Year of construction: 1991, Technical details: pressure: 2000 t chamfer lenght: 4100 mm control: - Njdpfx Akey Alw Heusct distance between columns: 3200 mm stroke max.: 250 mm total power requirement: 22 kW operating pressure: max. 280 bar table width: 200 mm stroke speed - idle stroke upwards: 100 mm/s stroke speed - idle stroke downwards: 100 mm/s weight of the machine ca.: 18.000 t dimensions of machine: 5,0 x 2,7 x 3,0 m

Condition: used, Year of construction: 2008, Technical details: Number of filters: 5 St. filter: 576/556 x 74 x 1050 mm total pressure: 200 daPa volume capacity: 1500 m³/h filter surface area: 25 m2 Voltage: 460 V motor capacity: 3,3 kW dimensions L x W x H: 1,05 x 1,28 x 2,0 m Dry separator with fan is sold as is. Built-in sheet steel construction Nsdpsyt I Axefx Akuoct Filter surface VARIO T 1.5 f=50 Hz Filter: 6 filter elements; dust extraction via container Ø 300 x H: 380mm Fan: Intake opening Ø 250 m; connected load 380V Exhaust air opening via ceiling External operation (was integrated in a laser cutting system Trumpf) *

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 4,500 h, Hydraulic press brake Manufacturer: TRUMPF, Type: TruBend 3066 B26 Year of manufacture: 2017 Like new, only 4,500 operating hours! Technical data Manufacturer: TRUMPF Type: TruBend 3066 (B26) Year of manufacture: 2017 Bending length: 2040 mm Press force: 66 t Operating hours: 4,500 h (metered) Nsdpfx Akey Txdbsuect Free clearance between uprights: 2364 mm Reach: 400 mm Stroke: 200 mm Y-axis rapid traverse speed: max. 200 mm/s Y-axis working speed: max. 15 mm/s Drive power: 17 kW Dimensions: L 2.60 x W 1.65 x H 2.40 m Weight: 5650 kg Equipment - Electro-hydraulic upper drive - Block hydraulics - Controlled axes: Y1, Y2, X, R - 3 backstops - TRUMPF upper and lower tool clamping system - Self-adjusting crowning system - Control: Delem T3500T Multi-Touchscreen 17" - Light curtain front BendGuard - Integrated TRUMPF technology data - Foot switch - Technical documentation - Tool package consists of: - Upper tool Trumpf OW201K, slightly bent, 86°, L = 1,250 mm, segmented - Bent upper tool, H 120 mm, R1/86°, L = 1,950 mm, segmented - Lower tool EV042, V10, L = 1,250 mm, segmented - Lower tool V24, 80°, L = 2,000 mm - plus various short tools All information without guarantee. A demonstration under power is possible at any time in our showroom.

Year of construction: 2007, condition: ready for operation (used), Offered is a high-performance solid-state disk laser. Laser power: 6000W, beam quality: 8mm mrad, wavelength: 1030nm, laser diode rated power: 29kW, control: TRUMPF LaserControl S. Equipped with internal heat exchanger, Grundfos pressure pump CRI10, integrated safety circuit, 2-phase fiber optic connection box. Weight: approx. 2000kg, overall dimensions X/Y/Z: approx. 1750mm/850mm/1370mm. Inspection possible by arrangement. Nsdpfxjy T N Ids Akuoct

Condition: like new (used), Year of construction: 2019, machine/vehicle number: B0203R0016, functionality: fully functional, operating hours: 3,500 h, stroke length: 250 mm, total length: 6,000 mm, total width: 2,300 mm, total height: 3,000 mm, overall weight: 17,000 kg, controller manufacturer: TRUMPF, controller model: T3500 Touch CNC control, working width: 4,000 mm, bending force (max.): 230 t, installation height: 3,000 mm, control type: CNC control, degree of automation: semi-automatic, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, lower tooling, safety light barrier, upper tooling, TRUMPF ProfiPress 230-40 Heavy Duty CNC Press Brake LOW HOURS! High-performance heavy duty hydraulic press brake in excellent technical condition with very low operating hours. The machine has been fully serviced and maintained exclusively by TRUMPF from new. Equipped with TRUMPF T3500 Touch CNC control, offering fast and intuitive operation, DXF import for tools and part files, and efficient programming directly from CAD data. 4-axis CNC backgauge (X, R, Z1, Z2) with 4 backgauge fingers, allowing easy and precise part positioning, improved repeatability, and comfortable two operator bending for large or heavy parts. Integrated CNC crowning system guarantees accurate bending results over the full working length. Robust block hydraulic system and hydraulic upper beam drive make this press brake extremely powerful and reliable, suitable for continuous industrial production. Fast working speeds. Features include pneumatic uper clamping system, foot pedal operation, DXF import, and safety systems. Key advantages: – Very low operating hours – TRUMPF serviced machine, TRUMPF support. TRUMPF ProfiPress series. – 4-axis CNC backgauge with 4 fingers ideal for two-operator or long part bending – Heavy-duty, extremely rigid construction – DXF import (tools & parts) – High precision CNC crowning Njdpeycl U Rjfx Akujct – Reliable ProfiPress series Delivery within Europe possible by agreement. The machine can be inspected under power by appointment.

Condition: excellent (used), TruTool PN 200 electric hand cutting machine Product features The new TruTool PN 200 vibrating shear is mainly used for cutting C-L-U sections, trapezoidal sheet metal, etc. components. The device with a short tool for processing sheet metal with a profile depth of up to 85 mm and for C-L-U sections. Also for corrugated sheet metal. Njdpfxeuhm E Ss Akusct Ideal for hard-to-reach places. The working direction can be adjusted 360° easily and without tools in 45-degree steps. Minimized set-up time Replacement of punch and yoke without interruption and without tools. Unmatched speed Fast and efficient, 2.1 meters per minute at 400 N/mm2 structural steel. Application: Trapezoidal sheet metal For cutting profiles up to 86 mm deep and 132.5 / 40 mm wide. For straight and diagonal cuts. Profiles For cutting C-L-U profiles. Corrugated sheet For cutting and slitting. For bevel cuts and internal and radial cuts. - MAXIMUM SHEET THICKNESSES: - MAXIMUM THICKNESS OF 400 N/MM² STEEL SHEET: 2 mm. - MAXIMUM THICKNESS OF STEEL 600 N/MM²: 1.5 mm - MAXIMUM THICKNESS OF STEEL SHEET 800 N/MM²: 1 mm - MAXIMUM THICKNESS OF SHEET METAL MADE OF ALUMINUM UP TO 250 N/MM²: 3 mm - RADIANCES: - LOWEST RADIUS: 50 mm - GENERAL INFORMATION: - OPERATING SPEED: 2.1 m/min. - NUMBER OF SHAKES AT NOMINAL LOAD: 1500 1/min. - INITIAL HOLE DIAMETER: 24 mm - RATED POWER CONSUMPTION: 550 W

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, Trumpf TruPunch 2020 Ncedpjy S Adpjfx Akujt

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 120 t, stroke length: 200 mm, table length: 3,110 mm, overall weight: 8,300 kg, Manufactured by Trumpf (Germany) Year of manufacture 2006 Control: DELEM DA-65TW Bending capacity, ton 120 Max plate length, mm 3110 Adjustable stroke, mm 200 Power required, kW 11 Machine dimensions, mm 3600 x 1750 x 2330 Ncjdpjy S R Upofx Akuet Machine weight, kg 8300 The press brake is fully complete, under power, equipped with 6 axis and tools.

Condition: good (used), Year of construction: 2008, TruBend 5085 press brake Ncedpfx Asy Shc Dskuet

Condition: good (used), Year of construction: 2012, TruBend 5050 Ncsdpfx Asy Shcdokust

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm Nsdpfxoy Saqge Akujct - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: good (used), Year of construction: 2014, functionality: fully functional, laser power: 4,000 W, laser type: fiber laser, TruLaser Robot 5020 LW01 4000 Watt X x Y x Z Working Area max (mm): 2000 x 1000 x 700 Laser Power: 4000 Watt Operating Hours: 19,975 h Laser Beam On: 10,353 h Standard Equipment Machine: - KUKA Robot KR30 HA (High Accuracy) - Robot working area (per layout) - Software package Laser Robot Tech - Paper documentation - Basic media supply kit - Robot media guidance - Robot height extension - KTL alignment set - Mobile operating trolley for KCP - Compact dust extractor 3000 m³/h, plate filter, extinguishing unit - Laser safety cabin - Extraction piping - Laser safety window - Cable ducts Robot: - Magnetic coupling Workpiece Positioner - DKP400.1 rotary/tilt positioner - DKP 400.1 energy supply - DKP 400.1 actuator/sensor interface - 3D clamping plate 800 x 100 mm, Demmeler system - Twin-station turntable - Active safety system for partition wall, turntable Euro - Energy supply for turntable - Actuator/sensor interface turntable - Flexible fixture holder turntable - Modular clamping system - Stand for modular clamping system incl. counterholder Extended Laser Equipment - TruDisk 4002 - Cooler for TruDisk 4002 Ncedpfx Ajy Saulokujt - 30 m fiber optic cable Technology Package - Laser welding technology package - Motorized focus adjustment option - TeachLine option - Gas supply block for shielding gas Argon Laser Safety Cabin - Automatic sliding door - Video surveillance with camera

Condition: good (used), Year of construction: 2005, functionality: fully functional, pressing force: 320 t, installation height: 615 mm, control type: CNC control, Bending length [mm] 4220.00 Nodsy Sarqopfx Akujct Press force [tons] 320 Control unit TRUMPF TASC 6000 Hydraulic hours [h] 53,030 Standard equipment: - Rigid machine frame, all-steel welded construction - Press beam with high bending strength - Spherical mounting of the press beam with beam tilt capability - Electro-hydraulic top drive with 4-cylinder technology - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure scale - Measuring system with centrally mounted glass scales and temperature compensation - Manual, integrated wedge crowning in the bed - "New Standard Clamping" manual, hardened, self-centring upper tool clamping system for vertical tool change - Lower tool clamping with hydraulic clamping, hardened - Programmable lower tool displacement (pneumatic, 2 positions) - 2-axis backgauge system with rack-and-pinion drive for X and R axes, 2 stop fingers, safely adjustable from the front - Machine control: TASC 6000 - Operator console with LCD keypad, emergency up, down and E-stop foot switch - Safety features: integrated side doors and automatic rear roller cover - Control cabinet cooling - Oil cooler - Modern machine design + 5-axis backgauge system + Hydraulic upper tool clamping + CNC crowning + BendGuard + 2 support consoles + Park position + 1 bending aid + Additional foot switch

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming capability Nsdpoy Sat Uofx Akuect - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post

Condition: good (used), functionality: fully functional, Year of construction: 2013, laser power: 2,700 W, X working area max.: 2500 mm Y working area max.: 1250 mm Control system: Rexroth IndraMotion MTX (basic version) Laser power: 2700 Watt Standard Equipment Machine - Sturdy, easily accessible C-frame - Coordinate guide system for high-precision machining - Linear magazine with 23 tool stations and 2 clamps - Maintenance-free three-phase drive motors - Repositioning unit with programmable hold-down device - Foot pedal for clamp closing - Alignment pin (right inside) - Ball tables - 2 parts flaps 500 x 500 mm incl. sensor for parts ejection - Two good parts containers - NitroLine - Focus Line - FastLine - FlyLine - Slag cone detection - Ejector cylinder for laser parts TRUMPF Laser - TruFlow 2000 laser with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control - Enclosed beam guidance - Fine filtration of compressed air for beam tube ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change system UTI with bus connection - ControlLine Punching Station Nodpfxey Saqmo Akujct - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down device with manually adjustable holding force - Stroke counter for punch and thread-forming - Punch spray lubrication - Punch slug extraction - Measurement of fill level in punching console - Level monitoring for thread-forming and tool lubrication Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 17" touch screen - Integrated technology data - Teleservice via internet - Programmable cutting gas pressure - Automatic shutdown incl. wake-up mode - Program management - Production scheduling Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Two-beam light curtain - Monitoring system for gas pressure, temperature, and cooling water - Emergency stop - Protection against stray radiation - Compact extraction unit + Brush tables + Lowerable die + MultiTool function + Softpunch function + Marking function + Chip conveyor with tilting container + Roll technology functions: roll knurling, roll deburring, roll shearing, roll offsetting, roll bead forming, roll cutting + Die spray lubrication + Blow-off device for small parts + 1 pc. additional clamp + Smart Punch Monitoring (punch breakage monitoring) + Vibration-damped installation + Repositioning cylinder + Warping detection + Parts conveyor belt in punching area + Parts conveyor belt in laser area + GripMaster (2500x1250) + Scissor lift table + Scrap grid pallet + SheetMaster (2500x1250) (AK04) + Peeling system + Automatic clamp closing + HZP loading/unloading + TwinCarts loading station with toothed belt drive + TwinCarts unloading station with toothed belt drive

Condition: good (used), functionality: fully functional, Year of construction: 2003, laser type: CO₂ laser, laser power: 2,700 W, X working area max.: 6500 mm Laser power: 2700 watts Control: SINUMERIK 840D Standard equipment TRUMPF loading unit: - Tube feeder for round, square, and rectangular tubes via buffer section with X-stop for tube lengths min. 3 m and max. 6 m - Semi-finished product length measurement - Transfer unit to the machine - Tube magazine with tube separation, alignment, and transfer to tube feeder, max. bundle weight 4000 kg - Good parts removal up to max. 3,000 mm with chip conveyor - Additional tube supports - Tube handling unit: Rotating and feed station: Rotating clamping unit with pneumatically actuated clamping jaws for tube lengths up to 6000 mm and tube diameters of d = 20 - 150 mm, 2 clamping ranges: d = 20 - 85 mm and d = 85 - 150 mm - Carriage unit with linear guidance - Feed station with motor drive, including connection for extraction Njdpfxey Sanrj Akuoct - Tube support: Between tube support and traverse chuck, five automatically retractable support elements with form shells are provided - Traverse chuck: With a passage of d = 150 mm - The tubes are positioned via the clamping jaws centrally in the Y and Z axes relative to the rotational axis for the cutting process - 2 sets of clamping jaws for round, square, and rectangular tubes (simple design), clamping range 20 - 85 mm, 85 - 150 mm - Good part removal (unloading cabin for round and rectangular tubes) - Sorting options: 2 finished parts (front and rear), 1 flat - Scrap conveyor; programmable sorting; max. scrap length 300 mm (collection container, scrap belt) - Finished part length up to 3000 mm can be automatically unloaded (front and rear) Safety equipment: - Compact extraction unit Filter system designed for the separation of airborne particles produced during laser cutting of metals - Light barrier: Loading area secured by light barriers - Protective cabin: In the area of the cutting head, a Macrolon sheet metal combination is installed for laser radiation protection - Chip conveyor: Conveyor belt for discharging cut remnants - Operating manual

Year of construction: 1990, condition: used, Punching machine Trumpf Trumatic 240 Ncsdpfoy Ru Idjx Akujt

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Operating hours: 28,000 h Nodoy Rnb Depfx Akujct

Condition: used, Year of construction: 2010, controller model: , _____ Description: Year of manuf. : 2010 TruDisk 3302 laser system :- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad :- Output power of 3.3 kW at the workpiece :- Laser system with 1 cavity :- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control :- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data :- Fast laser power control :- TruControl 1000 control system :- Storage capacity for 199 laser programmes :- Safety monitoring in accordance with laser safety class 1, including a central safety lock :- Protection class IP54 :- 10.4" panel computer with TFT touchscreen Ncedpfx Aoy R Sc Eokuet Extension of the beam path :Plus 1 additional laser light cable output, including interface card :consisting of: :# Optical assembly on base plate with fast switch :# Beam safety switch after coupling, if the output is not connected to an LLK KUKA Roboter KR 30 HA (High Accuracy) inkl. KRC2 :- Six-axis industrial robot mechanics with articulated kinematics :- Three-phase servo drives for 6 degrees of freedom – maintenance-free and protected against overload :- Absolute position measurement :- The K-IRL programming language enables, amongst other things, a flexible programme structure, freely selectable programme/variable names, etc. :- Telediagnostics module DKP 400.1 Rotate-Tilt Positioner :- Rotation and tilting of workpiece clamping devices in relation :to the robot’s position :- Fully interpolated integration of the rotation and tilt axes :as the 7th and 8th NC axes 3D clamping plate 800 x 100 :- Demmeler System :Clamping of fixtures via 3D worktable, hole pitch 16 :mm / grid 50x50 mm 2, SW 800x100 Two-station rotary table :- Manual two-station rotary table, each side of which can accommodate one component clamping fixture :- Light-tight integration into the safety enclosure :- The fixtures are connected via two support rails each Laser Welding Technology Package :- Manual two-station rotary table designed to accommodate one component clamping fixture on each machining side :- The fixtures are connected via two support rails each :with a 16 mm diameter and 100 mm hole pattern : : Standard cabin :- Dimensions (L/W/H) 4800 mm x 7000 mm x 3200 mm :- Automatic sliding door at the front 2000 mm x 2300 mm :- 1 laser safety screen :- Cab lighting

Condition: ready for operation (used), Trumpf 12-11-59-00/02 Radiation Protection B SN: , used, in good condition, 100% fully functional, scope of delivery as per photos. Ncjdpfx Akey Ntbysuet

Condition: good (used), functionality: fully functional, Year of construction: 1985, control type: CNC control, actuation type: hydraulic, controller manufacturer: Bosch, controller model: CC 300, sheet thickness (max.): 6 mm, working length: 2,500 mm, working width: 1,300 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,300 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, workpiece weight (max.): 200 kg, power: 7.5 kW (10.20 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, compressed air connection: 6 bar, overall weight: 16,800 kg, total length: 5,000 mm, total width: 5,000 mm, total height: 2,600 mm, Equipment: documentation/manual, We offer this good TRUMPF Trumatic 260 Rotation CNC punch, year of construction 1985. manufacturer: TRUMPF model: Trumatic 260 Rotation year of construction: 1985 Nodpey Ax I Ejfx Akujct condition: good category ID: 908 type ID: 1180 type: CNC punch If you have any questions or need more information, feel free to send us a message or give us a call. TRUMPF Trumatic 260 Rotation & Quicksharp ALL TOOLING INCLUDED • Punching Force: 250 kN (approx. 25-30 tons) • Footprint: L x W x H 5000 x 5000 x 2600 mm • Working Range (X x Y): 2500x1300 mm (plus optional repositioning) • Max Sheet Thickness: 6.4 mm • Max Workpiece Weight: 150-200 kg • Tooling: 10 stations (with 360-degree rotation of all tools) • Max Tool Diameter: 76.2 mm • Max Rotation Speed (C-axis): 360°/sec • Traverse Speeds (X/Y): Up to 90 m/min (X), 60 m/min (Y) • Control: Bosch CC 300 (typical) • Machine Weight: Approx. 16,000-16,800kg • Compressed air requirement: 6 bar • Motor Power Hydraulics: 7,5 Kw • Mains Connection: 380 volts, 50 Hz, 35 kVA

Condition: used, Year of construction: 1994, machine/vehicle number: 884019, functionality: fully functional, power: 15 kW (20.39 HP), total length: 3,600 mm, total width: 2,300 mm, total height: 2,800 mm, overall weight: 8,800 kg, TRUMPF Trumabend 125/3 Year of manufacture: 1994 Control: CNC (DA58) Country of origin: Austria Press force 125 t Bending length 3050 mm Frame gap 2550 mm Total power requirement 15 kW Throat depth 350 mm Approach speed 130 mm/sec Working speed 1–10 m/min Return speed 100 mm/sec Backgauge – adjustable 1000 mm Stroke 200 mm Installation height Nodpfxjy Iydle Akuoct 400 mm Press capacity 280 bar Space requirement approx. 3.6 x 2.3 x 2.8 m Machine weight approx. 8.8 t Control CNC Control system DA58

Condition: excellent (used), For sale: Dräger Oxylog 2000 Plus transport ventilator – a professional mechanical ventilation device used in ambulances, medical transport, emergency rooms (ER), intensive care units (ICU), and by rescue services. The device powers on and operates correctly; the display is clear, with visible menus and parameters. Good visual condition with normal signs of use appropriate for its age (see photos). The equipment is sourced from the German market. Data and Equipment: • Model: Oxylog 2000 Plus • Manufacturer: Dräger • Year of manufacture: 2015 • Version: Transport • Module: LDS RD 228 • Gas supply (O₂ / Air) • Includes transport bags • Includes hoses and mounting bracket • CE marking, Made in Germany Features: • Adult and pediatric ventilation • Ventilation modes for emergency care • Adjustable parameters: Vt, frequency, FiO₂, PEEP, etc. • Clear display with parameter overview • Safety alarms Technical condition: • Used device • Fully functional – turns on and responds to settings • No current calibration certificate (certification to be arranged by buyer if required) Ncjdpfx Akox N Icxjujt Legal notice: Medical equipment – intended for use by qualified personnel only. Perfect for private ambulances, medical transport companies, training purposes, military, offshore operations, or as backup equipment.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 42,200 h, pressing force: 130 t, table length: 3,230 mm, clearance between the columns: 2,650 mm, total length: 3,980 mm, total width: 1,900 mm, total height: 2,840 mm, overall weight: 10,200 kg, control type: CNC control, Hello, We are selling Trumpf TruBend 5130 CNC press brake, tooling included.. 130t/3meter Nsdpfx Akoy Nd I Reuoct CNC bending machine, 4-axis back gauge, CNC crowning, TASC 6000, Willa hydraulic clamping, Tooling included, priced aprox. 10000€ Lower die 16mm - 3m - sectionized for 30° 50mm - 3m - sectionized 80mm - 515mm Upper Tool finer height 200mm, radius of 1mm, for 30° - 3m - sectionized, for thicker plates height 20mm, radius 3mm - 600mm - sectionized Feel free to contact.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Pressure: 225 t Bending length: 4050 mm Control: DA 69 TW Oil capacity: 400 l Total power requirement: 17 kW Nsdpfxoyz S Nge Akujct Machine weight approx.: 18,100 kg Dimensions: 5700 x 2610 x 3300 mm