Used Veb Pressenbau Dessau Pyxwm 160 for sale (6,107)

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Bdjdpfoy D Rk Iox Ahmjh Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Year of construction: 1961, condition: used, functionality: fully functional, machine/vehicle number: 15/15/61, VEB Ellma Double-ended tenoning machine - 1100, manufactured in 1961. Machine designation and size: KS Manufacturing number and year of construction: 15/15/61 Total weight: 5.55 t Wiring diagram: G1-106/1 Sp Bsdpszavpgsfx Ahmedh Wiring diagram code: Lp Voltage type: ~ Frequency: 50 Hz Operating voltage: 380 V Control voltage: 220 V Connected power: 15 kW Machine rated current: 28 A Auxiliary machine rated current: 2 A Time-delay fuse: 25 A The used double-ended tenoning machine is in working order; it was mainly used for precisely cutting door components to length. The electrical components have recently been replaced, including a new electrical panel, as well as the feed motor and speed control mechanism. The machine has 2 vertical saws and 8 milling cutters, including 2 horizontal saws.

Condition: excellent (used), functionality: fully functional, mileage: 34,000 km, power: 219.91 kW (298.99 HP), first registration: 10/2010, fuel type: diesel, overall weight: 14,500 kg, tire condition: 95 %, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 11/2026, fuel: diesel, color: red, driver cabin: other, gearing type: automatic, suspension: steel, number of seats: 9, total length: 7,750 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, additional headlights, airbag, differential lock, fog lights, parking heater, trailer coupling, truck registration, Iveco 160 E HLF 20, superstructure by MAGIRUS AF 3 Road-going 4x2 drive Crew cab for 1 + 8 personnel Rear axle differential lock 2000 l water tank and 150 l foam tank Pump, 2000 l/min, manufactured by MAGIRUS Pneumatic lighting mast at the rear of the superstructure Area lighting Camera system Storage for electrical equipment/lighting PA system storage/backrests in the cab Special paint job, red/yellow Extendable hygiene board Martin fanfare system Front strobe lights Bdsdpfszx D Nwsx Ahmsh Auxiliary heater Electric exterior mirrors Roof storage for extension ladder and 3-part sliding ladder Tool deployment panel Rear warning system Tire chains for rear axle Euro 5 engine One-person hose reel system L/W/H: 8200x2500x3100 mm New inspections (MOT/emission test/safety inspection) available upon request for an additional charge Price available upon written request Sale without any included equipment -Sale only to authorities and businesses- (no sale to private individuals) Sold as a used vehicle without warranty.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, overall weight: 400 kg, electrical fuse: 16 A, Suitable for all types of dough. Reliable machine. Two-stage spiral mixer. Bowl and kneading mechanism are made of stainless steel. - Stainless steel base and spiral, - Power: 5 kW; Power supply: 400 V, - Max. flour capacity: 100 kg, - Max. dough capacity: 160 kg, - 2 speeds; 2 timers, - Electromechanical control panel, - Automatic transition from the first to the second speed Bsdezv Ik Tepfx Ahmedh Delivery not included in the price.

Year of construction: 2016, condition: used, machine/vehicle number: SN106552, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. Bdsdjza T Hiopfx Ahmsh We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: used, functionality: fully functional, Maximum working diameter: 2100 mm Table size: 1800 mm Minimum diameter: 200 mm Maximum number of teeth: 45 Max. module: 20 Bdsdpfx Ahsylprfjmsh Weight: 40 tons

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel Bdjdoz Dtb Dspfx Ahmeh – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Condition: used, Year of construction: 1963, overall weight: 1,050 kg, type of input current: three-phase, input voltage: 380 V, power: 2.8 kW (3.81 HP), input frequency: 50 Hz, input current: 7 A, CYLINDRICAL GRINDING MACHINE VEB BWF BERLIN SI 40x70 Model: SI 40X70 Serial number: 1436 Year of manufacture: 1963 Total weight: 1.05 t Circuit arrangement: SI40-60.0 Sp Wiring diagram: SI40-60.0 Lp Type of current: 3-phase AC Frequency: 50 Hz Operating voltage: 380 V Bjdpszl Sn Ujfx Ahmjdh Distribution voltage: 220 V Connected power: 2.8 kW Machine rated current: 7 A Rated current (fast): 25 A Permissible protection (slow): 20 A If you have any questions or require further information, please send a message or contact us by phone.

Condition: excellent (used), CATALOGUE NUMBER: 6875 TECHNICAL DATA - inlet width: 720mm - inlet height: 160mm - thickness of material to be shredded: 160mm - shaft width: 720mm - shaft diameter: 600mm - knife length: 80mm - number of knives: 4 × 12 pcs - screen dimensions: 25mm - feed roller with pressure on the inlet: 0.75kW - toothed feed roller at the bottom: 1.8kW - toothed feed roller at the top: 1.8kW - vibratory feeder length: 4470mm - vibratory feeder width: 710mm - vibratory feeder motor: 2.2kW - main motor: 55kW - auto-reverse - diameter of the suction nozzle: 260mm - vibratory feeder dimensions (L/W/H): 4470/950/930mm - machine dimensions (L/W/H): 3100/1500/1170mm - total weight: approximately 5500kg – German production – very low mileage Bodpfx Ahjzrm Uiomsdh – original documentation - auto-reverse (with adjustment option) – used shredder, very good / excellent condition Net price: 139900 PLN Net price: 32535 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may be subject to change in the event of significant exchange rate fluctuations)

Condition: like new (used), Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 1,280 mm, spindle bore: 105 mm, turning diameter: 11,000 mm, center height: 800 mm, feed length X-axis: 800 mm, feed length Z-axis: 11,000 mm, quill stroke: 200 mm, total length: 16,500 mm, total width: 2,100 mm, total height: 2,200 mm, spindle speed (max.): 200 rpm, spindle speed (min.): 1 rpm, type of input current: three-phase, overall weight: 36,000 kg, rapid traverse Y-axis: 4,000 m/min, workpiece weight (max.): 40,000 kg, Heavy Duty Lathe, type TCG 160 x 11m after overhaul: regrinding of the bed and carriage plate, new bearings on the main spindle, new bearings in the tailstock, new control cabinet with new equipment, 100% new wiring, new cable carriers, new paint, geometry according to ISO 1708. The lathe will be ready in January/February 2027. Special equipment: • 1600 mm (63”) dia. faceplate with 4 jaws • 3-point roller steady rest, dia. 100–400 mm • 3-point roller steady rest, dia. 250–600 mm • set of quadrant gears Bjdpfx Ahjz Hvynjmedh • electronic tailstock thrust indicator

Condition: excellent (used), Catalog number 7259 TECHNICAL DATA - Inlet width 400mm - Inlet height 200mm - Shaft width 530mm Bdsdpfszrug Tex Ahmoh - Shaft diameter 550mm - Blade length 530mm - Number of blades 2 - Screen dimensions 50x50mm - 2 toothed pull shafts from below - Lower shaft motor 2.2kW - Toothed pull shaft from above - Upper shaft motor 2.2kW - Belt conveyor 0.55kW - Belt conveyor length 3000mm - Belt conveyor width 410mm - Main motor 45kW - Automatic reversing - Reverse gear - Machine dimensions (L/W/H) 2900x1600x1600mm - Feeder dimensions (L/W/H) 3070x720x670mm - Weight approximately 3500kg ADVANTAGES - German-made - Automatic reversing (with adjustable settings) - Reverse gear - Used shredder, very good condition Net price: 85900 PLN Net price: 19977 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Cauhe S-IV A 120×160 Hot Stamping Press The machine is fully operational, like new. Made in Spain. Format: 1200x1600mm Weight: 10,000kg Power supply: 380V Motor: 11 kW Impact force: 2 Tm/dm² Equipment: – Pneumatic clutch and brake – Control panel – Full-format heating plate with 3 heating sections – 3 operating modes: continuous, time-delayed, manual – 3 independent foil feeds – Central automatic lubrication – Additional safety guards Bedpfozz Hg Djx Ahmodh – Operating tools – Press plate

Condition: ready for operation (used), functionality: fully functional, NC machine vice / HOMGE HPAQ - 160 MULTIPOWER -CLAMPING RANGE / 750mm -Jaw width 160mm -Overall height 220mm Bdodpoz Hzatjfx Ahmeh -Overall length 1100mm -Total weight approx. 120 KG Errors and omissions excepted.

Condition: excellent (used), For sale: an industrial KSB ETABLOC GN 40-160/402 centrifugal pump with a 4.6 kW electric motor. Pump specifications: • Manufacturer: KSB • Model: ETABLOC GN 40-160/402 • Design: GN11 • Pump serial number: 4-925-237868/1 • Flow rate: 7.5–32.5 m³/h • Head: 35.8–32.5 m • Pump speed: 2900 rpm • Year of manufacture: 2000 Motor specifications: • Motor type: QU FA 112M2A-60 • Motor serial number: 146249 RU • Power: 4.6 kW • Power supply: three-phase • Frequency: 50 Hz • Voltage: 380–420/660–725 V • Current: 7.8–7.6/4.5–4.4 A • Speed: 2850 rpm • cos φ: 0.91 • Protection class: IP55 • Insulation class: F Bdodezva Azopfx Ahmeh • Operating mode: S1 • Pump weight: 57 The pump is used and is in the condition shown in the pictures. Normal signs of use and storage are visible.

Condition: excellent (used), For sale: a KSB ETABLOC-GN 65-160/1102.21 centrifugal pump, equipped with an 11 kW electric motor. The pump is used and in working order. It is in good technical condition and shows normal signs of use and storage. The exact visual condition can be seen in the photos. Pump technical specifications: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 65-160/1102.21 Design: GN11 Ident-No.: 48861861 No.: 5-925-204038 / 1 Flow rate Q: 18–143 m³/h Head H: 35.5–22 m Rotational speed: 2900 rpm Motor technical specifications (50 Hz): Bdjdpjzvyuqofx Ahmeh Manufacturer: KSB Power: 11 kW Voltage: 380–660 / 420 V Current: 20.8–12.0 / 19.0 A Rotational speed: 2900 rpm cos φ: 0.92 Protection class: IP55 Insulation class: F Motor weight: approx. 79 kg Condition: Used, in working order. Normal signs of wear and tear resulting from previous use and the age of the equipment. Scope of sale: KSB ETABLOC-GN pump with electric motor – exactly as shown in the photos, in the presented condition and configuration.

Condition: excellent (used), For sale is an industrial KSB ETABLOC-G 50-160/1102 G4 centrifugal pump integrated with an 11 kW KSB / Klein, Schanzlin & Becker AG electric motor. The pump is used, inspected, and in working order. It features a robust industrial design and is suitable for water, circulation, and process applications. It shows normal signs of use and storage, as visible in the photos. Pump technical specifications: Manufacturer: KSB Aktiengesellschaft Model: ETABLOC-G 50-160/1102 G4 Serial No.: 5-927-220892 / 1 Flow rate Q: 20–80 m³/h Head H: 45–38 m Rotational speed: 2900 rpm Year of manufacture: 1993 Design: block centrifugal pump Connections: flanged Motor data: Manufacturer: KSB / Klein, Schanzlin & Becker AG Motor type: RF 11/2-75 Bodpfx Ahjzvyyajmedh Power: 11 kW Power supply: 3-phase Voltage: 380 V Current: 22 A Frequency: 50 Hz Speed: 2930 rpm cos φ: 0.88 Protection class: IP54 Insulation class: F Condition: Used, inspected, and fully functional. Normal signs of use and storage appropriate for the age of the device. Weight: approx. 120 kg The sale includes the complete pump with the electric motor, exactly as shown in the photos.

Condition: used, Year of construction: 2016, controller manufacturer: Siemens, controller model: Sinumerik, _____ Description: Year of manuf. : 2016 Control : Siemens Sinumerik General: Year of construction:2016 Control:Siemens Sinumerik Chuck diameter:170 mm Swing diameter:240 mm Travel X/Z:720 / 300 mm Bodsz Htpgopfx Ahmedh Spindle: Speed:6,000 rpm Chuck:3-jaw chuck SMW Autoblok KNCS-N 170-43 Tool carrier: Technology:Turret, 12 stations Tool holder:VDI 42 Driven tool holders:Yes Automation: Technology:Integrated workpiece storage Features / Accessories: Chip disposal:Chip conveyor Coolant filtration:KNOLL band filter system (type 240 S-1) Fire protection:Kraft & Bauer argon extinguishing system

Condition: excellent (used), For sale: a used industrial centrifugal pump, KSB ETABLOC-G 32-160/302.2, with a 3 kW electric motor. The pump has been inspected and is fully functional. It is in used condition, with visible signs of wear, paint defects, and localized surface corrosion. The detailed condition of the unit is shown in the photos. Pump technical specifications: Manufacturer: KSB Bodpfxezvhxko Ahmedh Model: ETABLOC-G 32-160/302.2 Serial number: 0-118-631 703 Flow rate: 4–29.3 m³/h Head: 36.3–23 m Rotational speed: 2900 rpm Year of manufacture: 1990 Pump weight: 42 kg Motor technical specifications: Manufacturer: KSB Type: ZKA 100L2 Identification number: 0533496 Motor number: 585957 Power: 3 kW Power supply: three-phase Voltage: 380/660 V Current: 6.3/3.6 A Frequency: 50 Hz Rotational speed: 2860 rpm Protection class: IP54 Insulation class: B cos φ: 0.89

Condition: excellent (used), For sale: an industrial KSB centrifugal pump, model EB 32-160, equipped with a 4 kW electric motor. Pump specifications: • Manufacturer: KSB – Klein, Schanzlin & Becker AG • Type/Model: EB 32-160 • Pump number: 0-118-886 021 Motor specifications: • Motor number: 3358128-021 • Motor type: AF 112M/2A-11 • Power: 4 kW • Voltage: 380 V • Rotational speed: 2870 rpm • Current: 8.1 A Bdjdpfx Ahozvat Tomeh • Frequency: 50 Hz • Protection class: IP54 • cos φ: 0.89 The pump and motor were likely refurbished and inspected by a specialized service in 2024, as indicated by the stickers from Elektromotoren Reparaturwerk ROCK and the 2024 inspection marking. The pump has been inspected by us and is in working order. Used condition. The exact condition of the unit is shown in the photos.

Condition: used, Year of construction: 2025, Nominal volumetric flow rate: 1,447 m³/h Power: 2.2 kW Negative pressure: 2,200 Pa Filter area: 9.5 m² Diameter: 160 mm Dimensions: 1665 x 900 x 1980 mm Weight: 306 kg Bdsdjz E Sz Eopfx Ahmeh Storage location: Nattheim

Condition: used, * Single Facer * Width 2050 mm * New adhesive and grid walls * New corrugated rollers from Friese * New steam heads Bdedeztng Nopfx Ahmeh * New condensate valves * Overhead line bridge also available

Condition: excellent (used), IM Very good condition. Bodpfxezkvh Ne Ahmjdh

Year of construction: 1987, condition: ready for operation (used), 5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20. Bsdpfx Ahszqfxdjmodh

Condition: excellent (used), Magnet dimensions: 60 x 20 cm, working area: 22 x 65 cm Bdedjy Ittgjpfx Ahmjh

Condition: excellent (used), Weight: 760 kg Throat depth: 68 cm Table length: 115 cm Bdodpfozkkr Asx Ahmoh Table width: 70 cm Cutting height: 10 cm Angle adjustment Motor: 4 kW