Used Vital Fs32N for sale (301)

Condition: used, Year of construction: 2022, Excellent ByStar 4020 fiber laser with 15kW laser output and ByTrans Extented automation. Including nozzle changer, Mixgas and outdoor version of dust extraction. Hnodpfx Asy Erfvscher Viewing possible upon appointment. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Working dimensions: 4000 x 2000 mm Laser output: 15000W Automation: ByTrans Extended Power on hours: 5734h Cutting hours: 1570h

Condition: used, Year of construction: 2024, Outstanding Kraus Maffei injection moulding machine from 2024. In perfect condition with only 588 operating hours. Equipped with: 1x pneumatic valve on MOP 1x Hydraulic Power Pack 20l 2x Hydraulic core pull 1x 4-fold water battery Can be inspected under power upon appointment. Immediately available for delivery. More info available on request. Hsdpfxsx Ald Rj Achsnr Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Injection unit: 1400 Screw: 60 mm / 23.00 wear protection / 25.50 Min/Max tool installation height: 250/600 mm Max opening Width: 1150 mm Ejector: Platten Ejector EM hydraulix/electric Core Pull: 2 hyd Air valves: 1 MMP Control system: MC P1 Power supply: 400 / 230 V 50Hz 3 phase with neutral Clamping force: 2500 kN Injection capacity: 679 cm³

Condition: excellent (used), Year of construction: 2026, center height: 750 mm, total length: 4,200 mm, total height: 2,800 mm, total width: 2,300 mm, overall weight: 13,000 kg, feed length X-axis: 360 mm, feed length Y-axis: 800 mm, power: 28 kW (38.07 HP), Spinning machine LEIFELD - PNC 750 MACH-ID 9651 Make: LEIFELD Type: PNC 750 Control: BECKHOF PAULI Year: 2026 Retrofitted in 2026 Hsdpfx Acozd Dlvjhsnr New Controller  New SPS - SIEMENS  Main Power 28 kW Steel telescopic covers CE-Safety fence with door    Optional tooling for Parabolic 1200 mm Old owner machined 3 mm aluminum parts  Commisioning, Training, Tool, Installation Possible !! Max. blank / workpiece over bed:1500 Centre height over bed: 750mm Distance between centers: 1225mm Maximum sheet thickness: 7mm Stroke X-Axis: 360mm Stroke Y-Axis: 800mm Speedrange: 100 - 1000Rpm Power: 28kW Spindle taper head stock: 11DIN / Camlock Stroke pinole quill: 300mm Length: 4200mm Width: 2300mm Height: 2800mm Weight: 13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1996, overall weight: 1,000 kg, total length: 3,500 mm, total width: 1,000 mm, total height: 1,200 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulicbendingdriveoperatedbyhandlevervalve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Max.Tube Ø: 42mm Min. Tube Ø: 6mm Max. Wall thickness:3mm Max. Bending radius:5mm Min. Bending radius:180mm Max. bending length:2000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Hnodpfx Ajt Dk Ukechjr Weight: 1000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Okuma - LU-45M SuperBigBore MACH-ID 9778 Make: Okuma Type: LU-45M SuperBigBore Control: OSP-P200L X-Axis: 3200mm Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Length: 9800mm Width: 3609mm Height: 3409mm Weight: 34000kg Hnsdpfxoztctqj Achjr Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1987, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, total height: 2,100 mm, total width: 2,100 mm, total length: 2,200 mm, overall weight: 1,800 kg, workpiece weight (max.): 400 kg, 3 Axis digital read out Hodpfxozdf Efj Achenr Active digital read out Fixed table 800 x Central lubrication Coolant system with pump X-Axis: 500mm Y-Axis: 400mm Z-Axis: 400mm Table Length: 800mm Table Width: 460mm Table load: 400 Spindle speeds: 2500Rpm Feed rate X-Axis:1300mm/min. Feed rate Y-Axis:1300mm/min. Feed rate Z-Axis:1300mm/min. Stroke pinole: 90mm Length: 2200mm Width: 2100mm Height: 2100mm Weight: 1800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2002, Opportunity to buy a DEMAG injection moulding machine with 1000T clamping force and 140000 working hours. Can be inspected under power upon appointment. Availability: 06/2026 Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. Hsdpfxjyq Dqgs Achjnr We advise you to check any vital details! Clamping force: 1000 tons Opening stroke: 1250 mm Min. mold height: 500 mm Max. mold height: 1200 mm Distance between tie rods: 1400 × 1120 mm Plate size: 1950 × 1670 mm Screw diameter: 80–110 mm Injection volume: ± 2000–3800 cm³ Shot weight (PS): ± 1800–3400 g Injection pressure: up to ≈2380 bar Total weight: 72.5 tons (72,500 kg) Total length: 13,184 mm Total width: 3,175 mm Total height: 2,925 mm Max. pressure ($P_{max}$): 190 bar Max. flow rate ($Q_{max}$): 486 l/min System current: 409 A Heating current: 154 A

Condition: excellent (used), overall weight: 5,700 kg, total height: 300 mm, total length: 4,000 mm, total width: 2,000 mm, T slotted bed plate STOLLE - DT MACH-ID 9776 Make: STOLLE Type: DT Floorplate Length: 4000mm Hnsdjzrl Etepfx Acher Floorplate Width: 2000mm Height: 300mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 27mm Weight a plate approx.: 5700kg Number of matching pieces: 2 Length: 4000mm Width: 2000mm Height: 300mm Weight: 5700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), overall weight: 10,000 kg, total height: 400 mm, total length: 6,280 mm, total width: 2,100 mm, T slotted bed plate STOLLE - SDT MACH-ID 9775 Make: STOLLE Type: SDT Floorplate Length: 6280mm Floorplate Width: 2100mm Height: 400mm Hsdpfx Acszrl A Sehjnr No. Of T-slots: 7 Distance from T to T-slot / Jump:300mm T -slot size: 35mm Weight a plate approx.: 10000kg Number of matching pieces: 1 Length: 6280mm Width: 2100mm Height: 400mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), overall weight: 500 kg, total length: 1,000 mm, total width: 800 mm, total height: 500 mm, Box table ASQUITH MACH-ID 9774 Make: ASQUITH Hsdpfx Aszrflgochenr Number of T slots: 5+3 Jump from T to T: 160mm T size: 27mm Number of T-slotted sides:8 Length: 1000mm Width: 800mm Height: 500mm Weight: 500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2012, total height: 115 mm, total width: 180 mm, total length: 275 mm, Machine levelling feet BWF RK4 36 tonn (12 units) Length:275mm Width:180mm Hnsdpfx Aszqn Stjchor Height:115mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2012, total height: 135 mm, total width: 230 mm, total length: 345 mm, overall weight: 30 kg, Machine levelling feet 70ton(7units) MACH-ID 9762 Make: BWF Hodpfszqm Ndox Achsnr Type: RK5 Year: 2012 Length:345mm Width:230mm Height:135mm Weight:30kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1985, overall weight: 2,500 kg, total length: 1,800 mm, total width: 1,200 mm, total height: 760 mm, table height: 760 mm, Box table ASQUITH - RDG MACH-ID 9757 Make: ASQUITH Type: RDG Year: 1985 Number of T slots: 10 (7+3) Jump from T to T: 240mm T size: 28mm Number of T-slotted sides:2 Length: 1800mm Hedpfozqmg Nox Achenr Width: 1200mm Height: 760mm Weight: 2500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2018, condition: excellent (used), Spindle ISO 50 (DIN-69871-B) Hedpfx Aceyf Dp Eshsnr Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2018, overall weight: 320 kg, total length: 1,200 mm, total width: 800 mm, total height: 700 mm, CNC Bed-Type Milling Machine Correa Anayak - HVM BIRA Hodpfx Acozcpg Dshsnr Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Length:1200mm Width:800mm Height:700mm Weight:320kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Hnsdpfxjwg Sgce Acher Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: excellent (used), Year of construction: 1981, Dorries CNC Vert. boring mill single column with displaceable table - Make : Dörries - Germany - Typ : CTE 320 / 3400 - Age : 1981 – Ex. Aerospace ! - Serial.No : D 149 / 5079 - Chuck Ø : 3.200 - Max. turning Ø Pos. 2: 5.100 - Max. turning height : 2.650 - Stroke Tool holder : 1.250 - Crossrailadjustment : 1.500 - Table load : 60.000 Hsdpfx Aokwcpxochjnr - Tool shank size : 40 x 40 - Max. cutting power : 75000 - Max. torque on table : 60000 - Power main motor : 75 kW / 415 - Speeds 1 / 2 / 3 Range: 0,8 – 100 - Feeds Vario : 0,1 – 1.000 - Rapid Feed : 6.000 - Dimensions: 9,30 X 6,10 X 6,30 X 60 - CNC Siemens Sinumriek System 8 - Tool changer 16 positions - SCR Feed drives / each Axis own - Ballcrews + Slide roller guideways - Displaceable table hydraulic / manuel - Circular interpolation Please Note: The above information has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details

Condition: good (used), Year of construction: 2009, sheet thickness (max.): 6 mm, back gauge: 1,000 mm, total length: 3,850 mm, total width: 2,100 mm, total height: 1,750 mm, Make: SAFAN DARLEY Type: B-SHEAR 310-6 Hnedpjzp Dzhjfx Acher Year: 2009 Maximum sheet thickness: 6mm Max. cutting length: 3100mm Strokes on full length: 24mm Strokes in short 1000 length: 80 Cutting angle: 0,5 - 2° Length backgauge: 1000mm Number of down holders: 20 Approach speed: 200mm/sec. Sheetsupport: Yes Safety guides: Yes Operated mechanical or hydraulic:Hydraulic Power: 11kW Length: 3850mm Width: 2100mm Height: 1750mm Weight: 6200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1989, turning diameter over cross slide: 820 mm, spindle bore: 128 mm, turning diameter over bed slide: 515 mm, turning length: 2,000 mm, total length: 6,000 mm, total width: 1,900 mm, total height: 1,800 mm, spindle speed (max.): 1,400 rpm, Centre lathe VDF BOEHRINGER - DUE 800 MACH-ID 9760 Make: VDF BOEHRINGER Type: DUE 800 Year: 1989 3 Axis HeidenHain ND780 dro 3 chuck 400 mm 4 chuck 800 mm Steady rest closed ca 400 mm Steady rest C-Type ca 400 mm DBC Turning Length: 2000mm Swing over bed Ø: 820mm Hnsdpezpwwpsfx Achor Swing over cross slide Ø:515mm Spindle bore: 128mm Spindle power: 30kW Bed width: 560mm Speeds / ranges: 1400Rpm Quill Ø: 125mm Workpiece load: 5000 Length: 6000mm Width: 1900mm Height: 1800mm Weight: 6700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2015, turning diameter over cross slide: 660 mm, turning length: 3,000 mm, spindle bore: 82 mm, spindle speed (max.): 1,500 rpm, spindle motor power: 11,000 W, total height: 1,500 mm, total length: 4,700 mm, total width: 625 mm, Centre lathe CONTUR SAEILO - SJ-600L MACH-ID 9759 Make: CONTUR SAEILO Type: SJ-600L Year: 2015 3 chuck schunk 315 mm 4 chuck schunk 400 mm Multi fix tool system with inserts Digital reafdout system Steady rest  DBC Turning Length: 3000mm Swing over bed Ø: 660mm Swing over cross slide Ø:438mm Spindle bore: 82mm Spindle power: 11kW Bed width: 400mm Tailstock spindle Ø: 85Ø Stroke pinole: 165mm Spindle taper: 5Mk Speeds / ranges: 1500Rpm Length: 4700mm Width: 625mm Hodpfx Aezpwplschsnr Height: 1500mm Weight: 3000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1997, spindle bore: 62 mm, turning diameter over bed slide: 440 mm, turning diameter over top slide: 230 mm, turning length: 2,000 mm, total length: 3,500 mm, total width: 700 mm, total height: 1,500 mm, spindle speed (max.): 2,000 rpm, Centre lathe ZMM Sliven - CU 400 MACH-ID 9758 Make: ZMM Sliven Type: CU 400 Year: 1997 DBC Turning Length: 2000mm Swing over bed Ø: 440mm Swing over cross slide Ø:230mm Swing in the gap Ø: 620mm Spindle bore: 62mm Spindle power: 8kW Bed width: 360mm Tailstock spindle Ø: 70Ø Hsdpfx Aozpwixechonr Stroke pinole: 180mm Spindle taper: 5Mk Speeds / ranges: 2000Rpm Length: 3500mm Width: 700mm Height: 1500mm Weight: 2600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, Pallet Truck with Electronic Scale The pallet truck with an electronic scale, thanks to its precise weighing system, enables easy weighing of loads up to 2000 kg. This is essential in the transport and wholesale trade sectors, where weight control of goods is crucial for order fulfillment and regulatory compliance. It is also an ideal solution for distribution centers, where fast transport and simultaneous weighing of goods help optimize workflow. Thanks to its exceptional structural and technological features, this pallet truck can also be used in the food industry, where maintaining the highest hygiene standards and easy machine cleaning is vital. Stainless steel is a material that performs excellently against aggressive chemicals, making the truck safe to use in a variety of environments, ensuring reliability and long-term performance. This modern lifting truck with a scale is also used in bulk material warehouses and production facilities, where precise material weighing is key to maintaining proper quality and quantity standards. The truck is easy to operate, and its electronic scale allows for fast and accurate weighing of goods, significantly increasing operational efficiency. Therefore, the pallet truck with an electronic scale is an indispensable tool for any company where transporting and weighing loads happen in a single process, providing convenience, time savings, and error minimization. Hnsdpfjxg Nftsx Achsr Technical Specifications Load capacity: 2000 kg Overall height: 1210 mm Body height: 450 mm Min. fork height: 85 mm Lifting height: 110 mm Fork length: 1150 mm Steering arm length: 400 mm Overall length: 1550 mm Fork width: 170 mm Fork spacing: 556 mm Turning radius: 1400 mm Wheelbase: 1220 mm Dimensions (L1+L2)xB2xH1 Fork wheel diameter: Ø80x70 mm

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79248 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Hedpfx Aezkbirochonr Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, This listing is for 1 of 6 Grant EntericBio Heatstation. The unit is in full working condition and is ready for immediate release. Hodpjxxygrofx Achonr The EntericBio Heatstation is a crucial component of the EntericBio system, specifically engineered for the heat treatment of inoculated Stool Preparation Solution (SPS) tubes. This step is vital in preparing samples for molecular diagnosis of gastrointestinal infections. Key Features: - Precise Temperature Control: The Heatstation operates at a consistent 103°C for 30 minutes, ensuring effective treatment of samples to inactivate pathogens and prepare nucleic acids for further analysis. - Compact Design: With dimensions of 200mm (W) x 100mm (H) x 370mm (D), the Heatstation is designed to fit easily into laboratory workflows without occupying excessive space. - Integration with EntericBio System: The Heatstation works seamlessly with the EntericBio Workstation, which automates the setup of reactions. This integration enhances productivity by streamlining the sample preparation process. - High Throughput: The system can process up to 46 samples per run, providing a rapid solution for laboratories needing to manage large volumes of diagnostic tests. Performance: - Rapid Results: The entire process, from sample treatment to result availability, can be completed within 3 hours. This speed is essential for timely diagnosis and treatment of gastrointestinal infections. Applications: - The EntericBio Heatstation is specifically designed for: Molecular Diagnosis of Gastrointestinal Infections: Ideal for laboratories specializing in infectious disease diagnostics, it ensures accurate sample preparation for downstream analyses.

Condition: used, JONES & SHIPMAN 1307 EIT Precision Toolroom Universal Grinding Machine Model 1307 EIT Maximum grinding diameter 356 mm Grinding length between centres 1016 mm Maximum swing 356 mm Workhead speeds 6 speeds, 40 – 320 rpm Grinding wheel size 300 x 25 x 127 mm Grinding wheel speeds 1750 / 2300 rpm Wheelhead motor 3 kW Internal grinding spindle speed 16,000 rpm Floor space required 3207 x 1359 mm Weight 1930 kg Supplied with: Double Swivel Wheel Slide, Double Wheelhead, Internal Grinding Spindle, 3 Jaw Chuck, 4 Jaw Chuck, Magnetic Chuck, Faceplate, 2 Point Steady, 3 Point Steady. For sale with Jet Machinery Ltd Jet Machinery Stock No: 27015 Machine Serial Number: TBC Cost: £3,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Hsdpjzi Eqqsfx Achenr Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.