Used Wadkin C7 for sale (437)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 2NT01193, total length: 1,800 mm, total width: 1,000 mm, total height: 1,200 mm, input voltage: 220 V, product width (max.): 330 mm, Equipment: documentation/manual, double-sided, Canon imagePRESS'es C710, C650 and C910 – a reliable and high-performance digital production presses ideal for commercial print shops, in-house print rooms, and professional graphic environments. Ljdpfx Aeurbwxskyjrn Features Outstanding image quality Handles a wide range of media types and weights Suitable for brochures, flyers, booklets, marketing materials, and short-run production User-friendly touchscreen interface Condition Fully operational and well maintained, in excellent condition. The machines always serviced by Canon engineer with genuine parts, service history available if required Paper trays standard: 3 x sheet cassettes, Stack Bypass-C1: Multi-purpose tray/ for Long sheet) POD Deck Lite D: (A4/ A3/SRA3) Fiery Print Controller on board x 1 Prisma Sync x 2 Paper Size Length: 148 mm – 487.7 mm Width: 98.4 mm – 330.2 mm Up to 350gsm Duplex Colour Image Scanner with automatic document feeder Power Source 220-240 V Measurements Height 120. With touch control panel 145 Width 180 Depth 100 Machines always serviced by Canon. Discount offered if all 3 machines are bought. Available for inspection OPEN TO OFFERS

Condition: used, Year of construction: 2014, machine/vehicle number: 78300122, Drive type: Diesel, power: 308 kW, displacement: 10,600 cc, unladen weight: 16,170 kg, permitted total weight: 18,000 kg, with 2 driven axles, recorded mileage: 64,407 km, operating hours: 7,640 hrs, with category 4 rear hitch, mechanical, hydraulic top link, cat. 3, mounting for front weight, 5 additional control valves with breakaway couplings at the rear, rear PTO 1,000 rpm, PTO shaft 1 3/4, 6-spline, engine OM470 K 97/68 308 kW t4, fuel tank extension by 190 liters, refrigerator, semi-active cab suspension, fire extinguisher, GPS Pilot S10 RTK radio; NOTE: Steering shows error message Lrsdpfxjy Rvlks Akyen

Condition: good (used), machine/vehicle number: 4533, GOZUA RHC 75 CF centerless grinding machine Lodpfxjra A Urj Akyjrn

Condition: used, Year of construction: 2018, travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,240 mm, We offer this used HOLZ-HER DYNESTIC 7535 machining center, year of construction 2018. Manufacturer: HOLZ-HER Maschinenbau GmbH Model: DYNESTIC 7535 Lrjdpfx Akoyx Af Hoyjn Type: 7535 Serial Number: 127/1 806 Order Number: 19511222 Year of Manufacture: 2018 Series: BAZ18v3 Country of Origin: Austria Weight: If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2012, x-travel 760 mm y-travel 460 mm z-travel 460 mm control TNC 620 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 14 / 10 kW Torque 89 / 63,7 Nm tool taper SK 40 table surface area 900 x 410 mm max. table load 350 kg T-slots 4x number of toolpositions 24 pos. max. tool diameter 130 mm max. tool length 200 mm max. tool weight 8,0 kg rapid traverse ( X / Y / Z ) 36 m/min total power requirement 20 kVA weight of the machine ca. 3,3 t dimensions of the machine ca. 3,0 x 2,5 x 2,9 m Lrjdpfx Akezgibusyon CNC Machiningcenter Vertical SPINNER - VC 750

Condition: new, Year of construction: 2025, Showroom machine Year of manufacture: 2025 Features and technical specifications: Lodsxc Rmkepfx Akyjrn - Base machine DYNESTIC 7507 10.57 push - Upgrade from BetterNest rectangular nesting to: CAMPUS BetterNest freeform nesting software - Uninterruptible Power Supply - UPS (ZB27) - Touchtool tool length measurement - 10.3 kW router spindle - Drilling unit with 14 spindles - 1 additional machining field (Field A) at the rear with 1 stop, height 70 mm, pneumatically retractable - 2 electronically monitored side stops at the front, Field A + D, in X-direction for the front stop row (BF8) - 10-position tool changer 7873 - Tool changer 7872, one-position aggregate magazine, pivotable in X and Y direction for Clamex aggregate - 2 x 140 m³/h and 1 x 250 m³/h dry-running vacuum pumps, 400 V - 16-circuit vacuum system (VF16) - software controlled, incl. additional 25 meters sealing cord - Laser pointer - red (one laser pointer) Field D (ZB8) for positioning of vacuum suction cups or tracing the workpiece contour - Automatic central lubrication - Vacuum suction cups for smooth table surfaces, complete, 140x115 mm, height 30 mm with connecting hose - Thin sheet ejector as an addition to the ejector for special materials below 4 mm material thickness and standard wood-based materials under 2 mm - Complete conveyor belt, pusher conveyor belt, pusher table - TouchLabel PRO - touchscreen and label printer mounted on stand - Production control computer NEXTEC 4.0 - Extraction funnel at the end of the pusher conveyor belt - Availability: by arrangement - Location: Flörsheim

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm Lredpfxewka Upo Akyjn - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: used, color: orange, Year of construction: 2021, operating hours: 3,828 h, Empty weight: 31.000 kg Dimensions (LxBxH): 1077 x 339 x 300 cm Track width: 60 cm Digging depth: 5.395 m = Additional options and accessories = Lrjdpfx Aezf I Hajkysn - Rubber tracks

Condition: used, color: other, first registration: 01/2015, Year of construction: 2015, Serial number: H337539 Lrjdpfxevbzh Ts Akyen We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: good (used), functionality: fully functional, Year of construction: 2015, Used laser cutting and punching combination machine, immediately available, including numerous tools, due to company closure. Model: Trumatic 7000 -1300 (medium format) Laser source: 4 kW Lredpfxozd Swaj Akyen Year of manufacture: 2015 Active die option for forming Thread cutting option Includes Trumpf Quickset + Quicksharp + Quickload Sheetmaster Trumpf Toolmaster changer Includes numerous tools and cassettes The machine is still powered and can be tested in operation.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Technical Data Blister Module (B 1770) Max. Output 700 blisters/min Application area Solid products Max. format range [Feed x Width] 200 x 284 mm Cartoning Module (C 2305/C 2504) Max. Output 300 or 500 folding cartons/min Application area Blisters Max. folding carton size [A x B x H] 105 x 105 x 155 mm or 80 x 90 x 155 mm Lrsdov D Ipiopfx Akyen See PDF for details.

Condition: good (used), Year of construction: 2017, 5-Axis CNC Machining Center MAKA DC 7 2 units of MAKA DC 7 for sale. High-performance CNC machining center for 5-axis machining of composite, GRP, and CFRP components, designed with a fixed portal structure. The machining unit is horizontal, and the table is arranged vertically. Machine type: MAKA DC7 Year of construction: 2017 Number of tables: 1 x rotary table for tandem operation Technical data: Travel distances: X-axis: approx. 3,900 mm Y-axis: approx. 1,300 mm Z-axis: approx. 900 mm A-axis: 270° C-axis: 540° Speed: X- / Y- / Z-axis: 60 m/min. Lsdpfx Aezgtyhokyjrn A- / B-axis: 10,000°/min. Acceleration: X- / Y- / Z-axis: 3 m/sec² Cube dimensions (working area): X-axis: 2,000 mm Y-axis: 1,000 mm Z-axis: 500 mm Working area (cube dimensions) with a total tool length of 160 mm and a tool diameter of 160 mm. Table design: 1 x steel frame rotary table with dimensions: 1,000 x 2,000 mm. Max. table rotation time: 3 sec. Rotary table with center partition. While one side is being machined, the second side can be loaded or unloaded. 8 units of zero-point clamping systems, 4 units per table side, for quick fixture changes. Vacuum supply: 2 vacuum clamping circuits per table, with vacuum distribution unit, quick-release couplings on the table. 2 vacuum pumps, 1 per table, frequency-controlled, suction capacity approx. 100 m³/h, vacuum tank 250 liters, including frame. Universal head for 5-axis milling with a 90° head and tool change milling spindle C-axis (rotary axis) 540° (+/- 270°) A-axis (swivel axis) 270° (+/- 135°) Speed: 10,000°/min 1 milling spindle HSD Asynchronous motor, water-cooled for tool holder HSK-F63 max. power 12 kW (S1) / 15 kW (S6) max. speed 24,000 1/min Torque support with air supply for angle heads. 1 compressed air nozzle on the milling head, controllable via M-function. Tool changer: 1 carousel tool magazine with 12 positions, mounted on the side. 6 x positions: for tools up to 60 mm in diameter 5 x positions for angle heads and probing system 1 x position for saw blade up to Ø 350 mm. Control system: 1 machine control system Siemens SINUMERIK 840D SL User memory: CNC 3 MB Control panel with 15" display with graphic color LCD, foil keyboard, and mouse. Drives: Rack and pinion drives in the X and Y axes, ball screw drive in the Z axis, A/C axis with hollow shaft drive. Safety: 1 soundproof cabin, with maintenance door, including interior lighting. 1 automatic high-speed roller shutter door. Accessories: Chip guide plates inside the protective enclosure. Extraction system in the working area, to be connected to the extraction system. Receiver for 3D measuring probe. Tool breakage monitoring system. Both machines are assembled and ready for operation and can be inspected. An extraction system from Keller Absaugtechnik, including complete piping, is available. This extraction system was designed for 2 x MAKA DC 7 and is also for sale. We would be happy to prepare an offer for you!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, Equipment: chip conveyor, documentation/manual, Machine in perfect working order; installation can be arranged by the seller. Lrsdezgx I Djpfx Akyjn

Condition: excellent (used), Here we offer you a Johansson coordinate measuring machine. This coordinate measuring machine is designed for measuring large workpieces. Johansson Cordimatic 7000 measuring machine with Renishaw retrofit (control system, rotary/swivel probe & probe changing library) Johansson Cordimatic 7000 measuring machine with Renishaw rotary/swivel head PH10T Measuring range: 28" x 17" x 13.5" Granite table size: 42" x 28" x 8" Equipped with: Computer Metrologic 1 joystick pendant control Metrologic software manuals Joystick and control system from RENISHAW SPA2 servo power amplifier UCC2 controller Type: Johansson Cordimatic 7000 coordinate measuring machine Lrsdpfx Akezd N Sheyon Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2026, center height: 750 mm, total length: 4,200 mm, total height: 2,800 mm, total width: 2,300 mm, overall weight: 13,000 kg, feed length X-axis: 360 mm, feed length Y-axis: 800 mm, power: 28 kW (38.07 HP), Spinning machine LEIFELD - PNC 750 MACH-ID 9651 Make: LEIFELD Type: PNC 750 Control: BECKHOF PAULI Year: 2026 Retrofitted in 2026 New Controller  New SPS - SIEMENS  Main Power 28 kW Steel telescopic covers CE-Safety fence with door    Optional tooling for Parabolic 1200 mm Old owner machined 3 mm aluminum parts  Commisioning, Training, Tool, Installation Possible !! Max. blank / workpiece over bed:1500 Centre height over bed: 750mm Lrodpfxezd Dlve Akyen Distance between centers: 1225mm Maximum sheet thickness: 7mm Stroke X-Axis: 360mm Stroke Y-Axis: 800mm Speedrange: 100 - 1000Rpm Power: 28kW Spindle taper head stock: 11DIN / Camlock Stroke pinole quill: 300mm Length: 4200mm Width: 2300mm Height: 2800mm Weight: 13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Used equipment Features and technical data: - 2 L-shaped uprights with support tubes - 12 support tubes per upright - Clear height: 92 mm - Plug-in system for adjusting the clear height - Support tube diameter: 29 mm - Usable length of support tubes: 770 mm - Maximum load capacity of entire trolley: 500 kg (requirement: evenly distributed load, no impact loads) Lrsdpfx Akjy Ap U Noyen - Maximum load on 2 support tubes: 45 kg - 4 swivel castors with ball bearings and cast polyurethane coating, 160 mm - 2 castors with locking devices - Dimensions LxWxH: 500 - 3000 x 845 x 1840 mm Availability: short notice Stock location: 63934 Röllbach

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: BASE MACHINE DYNESTIC 7507 10.7_Push Processing length: 3,100 mm (without tools) Processing dimension in Y-direction: 2,200 mm CAMPUS V7 CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation Upgrade "CAMPUS "Better Nest" freeform nesting software" Uninterruptible power supply (UPS) Milling unit 7830, power: 10.3 kW (S6/40) Sensor package Chipcontrol for 3-axis spindle incl. receiver Ledpsygn Ibefx Akysrn 7884 Drilling unit, complete, 14 spindles, drive power 3 kW Integrated saw unit for cutting/grooving in X-direction, n(max.) 1,000–7,330 rpm, infinitely variable 1 rear stop rail for the machining field (Field D) at the rear with 1 lateral stop (replaces lateral stops at the rear) Stop monitoring for 5 standard stops at the rear and right Tool changer 7873, 6-position linear pick-up, pneumatically liftable with cover for HSK holders integrated 2 additional mounts for HSK holders for tool changer 7873. Tool changer 7872, single aggregate magazine swiveling in X and Y directions 2 x vacuum pump 140 m³/h, dry-running Vacuum unit complete, (VP8) 250 m³/h, 400V additional (upgrade) Vacuum connection complete, 16-circuit vacuum VF16 LASER, alignment complete, dot laser complete, option ZB8 Lubrication complete, central lubrication on encoder side 2 x vacuum suction pads for smooth table surfaces, complete 140 x 115 mm, height 30 mm with connection hose 2 x vacuum suction pads for smooth table surfaces, complete 120 x 50 mm, height 30 mm with connection hose Conveyor belt complete, push-off conveyor belt AUT 5 10.7 push-off table Additional extraction via push-off conveyor belt Push-off device on gantry, controlled, incl. simultaneous extraction of the wear plate Label printer Direct Label 7507 and complete touch label light Option ZB74 TouchTool tool length measurement Availability: by arrangement Location: Bavaria

Condition: used, Year of construction: 2012, Used Machine Year of Manufacture: 2012 Base Machine - Dynestic 7521 20.6 Dynestic Table For classic nesting processing with wear plate Processing length 6250 mm (DYNESTIC 20.6 comes with additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head, and consoles Gantry-type design Rack and pinion drive, helical-toothed, in X and Y directions, Ball screw spindle in Z direction for precise positioning Technical Data: The technical data refers to the DYNESTIC 7521 - 20.6 Please refer to the respective datasheets. Processing Dimensions: Max. workpiece size for trimming: X = 6250 mm Y = 2100 mm Max. travel distances: X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height on DYNESTIC table: Z = 1st level 318 mm / 2nd level 418 mm from table surface (without tool, without holder) Maximum programmable speed: Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and observation window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system Windows XP 80 GB hard disk / 1 GB RAM RJ45 network port 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD writer) Lrsdpfow I U Ecex Akysn Remote maintenance Integrated network card for transmission of control and program data. Data transfer via high-speed internet connection required. Requirement: High-speed internet connection at the machine. DYNESTIC Table Fixed, continuous processing table with grid layout, continuous grooves in X and Y direction, distance between grooves 50 mm with 25 meters of sealing cord for fixing the wear plate 1 processing field with stop rails / stop Height 30 mm, pneumatically retractable 2 stop rails each in Y-direction and 1 stop in X-direction right side (from machine front edge perspective) Vacuum Fields Single-circuit vacuum system Drilling Unit 7976, 24 spindles Motor power 3.0 kW 18 vertical spindles, individually selectable L-shaped arrangement: 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on board thickness) Spindle extension stroke: 70 mm Rotation: Alternating right/left n(max.) 1000 - 5710 rpm steplessly adjustable Mounting: M10 thread - 11 mm fitting Without tool, without holder 6 horizontal spindles 2 double drilling spindles in X-direction (Distance 32 mm between 1st and 2nd horizontal spindle) 1 double drilling spindle in Y-direction Mounting: M10 thread, 11 mm fitting Max. total drill length 70 mm from mounting end Without tool, without holder Free slot 1 for: Optional double drilling spindle in X-direction or Vertical adapter with double pressing force Free slot 2 for: Optional saw in X-direction or Vertical adapter with double pressing force Milling Unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 rpm, steplessly adjustable, two-stage feed stroke max. power at 12000 rpm to 24000 rpm Air-cooled with HSK-F 63 tool holder with right-hand rot...

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery Lsdpod H Hmhefx Akyjrn OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: excellent (used), CTS C-70/350 Climate Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: C-70/350 Equipment Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Testing Chamber Volume: approx. 350 liters For sale is a used CTS C-70/350 climate testing chamber from an industrial application. The system is suitable for temperature and climate testing, environmental simulation, material testing, electronics testing, quality assurance, as well as research and development. Technical Data: Temperature Range: -70 °C to +180 °C Climate Operating Range: +10 °C to +95 °C Humidity Range: 10 % to 98 % RH Dew Point Range I: +7 °C to +94 °C Dew Point Range II: -10 °C to +7 °C Temperature Stability (over time): ≤ ±0.3 K Humidity Stability I: ≤ ±1.5 % RH Humidity Stability II: ≤ ±3 % RH Cooling Rate: approx. 3.5 K/min Heating Rate: approx. 3.5 K/min Max. Heat Radiation at +20 °C: approx. 3000 W Testing Chamber Dimensions: approx. 650 x 720 x 750 mm (W x D x H) External Dimensions: approx. 920 x 1665 x 1800 mm (W x D x H) Weight: approx. 550 kg Power Connection: 400 V, 3/N, 50 Hz Connected Load: approx. 7.1 kW Rated Current according to Nameplate: approx. 11.5 A Protection Class: IP22 Sound Pressure Level: < 58 dB(A) Refrigerant: Pre-cooling Stage: R404A, approx. 2.3 kg Cooling Stage: R23 Operating Pressure PS: 25 bar Test Pressure PT: 20 bar Equipment Touch Control Panel Viewing Window in the Door Interior made of Stainless Steel Testing Chamber Lighting Insert Grid made of Stainless Steel Feedthrough Ø 50 mm on the right, center Capacitive Humidity Measurement System Software Temperature Limiter Min. / Max. USB Port for Data Storage Ethernet Interface RS232 Interface Air-cooled Design Documentation / Operating Manual Service / Inspection Condition: Used Optical Condition as shown in the pictures Normal signs of wear and tear from use and storage Scope of Delivery Lredpfx Aszd D Nzjkysn CTS C-70/350 Climate Testing Chamber Insert Grid Control Panel / Controller Documentation / Operating Manual Accessories as shown in the pictures Inspection possible after prior appointment. Shipping or freight shipping possible. Scope of delivery as shown in the pictures. Subject to changes and errors in the technical data as well as prior sale.

Condition: excellent (used), Year of construction: 2022, operating hours: 8,244 h, functionality: fully functional, overall weight: 445 kg, total length: 980 mm, total width: 1,975 mm, total height: 1,710 mm, power: 5.5 kW (7.48 HP), fuel type: electric, operating pressure: 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 45 °C, noise level: 68 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Available for sale from our warehouse location: Albert-Proeller-Straße 9a, 86675 Buchdorf Service will be performed professionally on June 16, 2026. Manufacturer: BOGE Model: C 7 DR Year of manufacture: 2022 Type: Screw compressor, sound-insulated Configuration: • C7 = 5.5 kW screw compressor • R = mounted on a compressed air tank • D = integrated refrigerant dryer Compressor type: Oil-injected screw compressor Rated power: 5.5 kW Maximum pressure: 10 bar Effective delivery rate: 0.736 m³/min at 10 bar Voltage: 400 V / 50 Hz Drive: Direct drive with elastic coupling Ledpfx Aozf Ihqokyjrn Control: Electronic BASIC control Dimensions (L × W × H): approx. 1975 × 980 × 1710 mm Weight: 445 kg (with tank & dryer) Tank volume: 500 l (C7R standard) Type: freestanding, under-mounted

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm - filter bag opening diameter: 500mm - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg Ledpfxeyfhiie Akyjrn ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: used, Year of construction: 1997, grinding length 880 mm grinding width 510 mm Control Siemens max. turning speeds 4.300 min/-1 grinding wheel diameter 210 - 400 mm grinding wheel width 100 mm total power requirement 26 kW weight of the machine ca. 7,5 t In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well Lrsdpfxewwl N Ss Akyjn as subject to prior sale!

Condition: like new (used), New Nash SC 7 vacuum pump Ljdpfx Akjxft Shsyern

Condition: excellent (used), CTS Climate Testing Chamber C-70/1000-S Device Data: Manufacturer: CTS GmbH Type: C-70/1000-S Design: Climate testing chamber / Environmental simulation chamber Cooling: Water-cooled Description: Used CTS climate testing chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Used in industry, research, development, and quality assurance. Temperature and Climate Data: Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 2.5 K/min Temperature change rate (cooling): approx. 2.5 K/min Ledpfx Aksy Iam Hoyjrn Humidity range: 10 % to 98 % RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data: 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Refrigeration System: Refrigerant: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment: CTS control panel with LCD display Program operation Digital setpoint/actual value display Observation window in the door Stainless steel test chamber Test specimen protection / Temperature limiter Interior lighting Side cable entry points Entry points approx. 50 mm and approx. 125 mm RS232 interface according to documentation Digital outputs for test specimen control Mobile design on rollers Dimensions: Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation dimensions (W x D x H): approx. 2350 x 1290 x 2000 mm Weight: Test chamber: approx. 1000 kg Condenser: approx. 120 kg Documentation: Declaration of conformity Test certificates Operating manual Messages and digital channels Installation plan Quick start guide Humidity diagram Scope of supply: CTS Climate Testing Chamber C-70/1000-S Documentation, where available Scope of supply as shown in the images Functional test Refrigerant service Leak test Condition: Used. Condition, see images. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.