Used Webomatic Thermoforming Machine for sale (65,151)

Condition: used, functionality: fully functional, Machine DU 1500 x 1000 x 620 T7 No. 98 15254 Plate size: 1000 x 800 mm, Draw depth: 620 mm Year of manufacture: 1998 Rated current: 238 A Total connected load: 164.5 kW Control system: Siemens OP 37 Equipment: • Loading/unloading machine • 6 cooling fans • Upper punch Djdpfsxmgvcox Akmjku • Film sag control • Motorized adjustable clamping frame • Flash emitter • Heating pyrometer • Cooling pyrometer

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: Dodpfxjtndpzj Akmeku min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM Dsdpfx Akjz Eh Egjmsku TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Year of construction: 2022, condition: good (used), Machine is in good working condition. Still in production. Parts shown by hand not come. Dksdpfx Ajzlaqdskmsu

Condition: excellent (used), Year of construction: 1981, machine/vehicle number: 1345, Machine Type: Two-Roll Mixing Mill (Mischwalzwerk) Main Manufacturer: TROESTER MASCHINENBAU (Sontra, Germany) Year of Construction: 1981 Origin: Made in Germany (West Germany) Heating System: Integrated heating system, equipped with temperature sensors. Dodpfx Akjyx Etgomjku Main Motor: EMOD (Herbert Odenwald Elektromotorenfabrik KG) Power: 45 kW (60 HP) Protection Class: IP 23 Current/Voltage: 88A / 380V (Delta) / 50Hz Speed (n1): 1465 U/min Gearbox (Transmission): Jahnel Getriebebau GmbH (Bochum) Type: D 450 SO Ratio: 16.4 : 1 Output Speed (n2): 89.3 U/min Oil Specifications: ISO-VG 320 Safety Features: Equipped with built-in temperature sensors for motor protection (Kaltleiter-Temperaturfühler 130°C).

Year of construction: 2022, condition: ready for operation (used), A small table-top vacuum machine (vacuum chamber machine) Italian Pack is available. Chamber dimensions X/Y/Z: 370mm/420mm/180mm, vacuum pump capacity: 16m³/h, max. utilization time per day: 5h. Documentation available. On-site inspection is possible. Dkjdpfx Aewt A U Rokmou

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Manufacturer: Apollo Model: 4AX 2030 Year of manufacture: 2021 Condition: used Machine type: CNC Router Dkedpfjz Iz Imjx Akmou If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 589-0263, Make Illig Model VHW 60/2 Year 2001 Condition Good Number of Heating Rolls Two Max material width 610 mm Dkodpfxjuzi I Ej Akmou Max material thickness 1.8 mm Max temperature of heating rolls 140 °C Material wrap around 563 Grad Total connected load 36.0 kW Dimensions 2300 x 1400 x 2400mm L x W x H (300kg) All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale

Condition: new, Year of construction: 2022, functionality: fully functional, Make Kiefel Natureformer Model KFT 90 Speed Year 2022 Condition New - Machines are unopened and still in original packaging from Kiefel. Forming Area 900 x 600 mm (35.5 x 23.5 in) Max Height of Formed Part 120 mm (4.75 in) Dkedpfx Akowkkpqsmeu Punching Force 600 kN Shot Weight Max. 300g (10.5 oz) Cycle time 15 seconds +/- Machine picture shown is for example only. Machine has not been installed.

Condition: excellent (used), Year of construction: 2006, Manufacturer Gabler Model M92 L Year 2006 Condition Very Good Stock Number 00006 Max forming area 750 x 436 mm Depth of draw 150 mm Max material width 835 mm Max cycles / min 44 Max mould closing force 350 kN Max top heater output 81.90 kW Max bottom heater output 54.60 kW Operating air pressure 8 bar Power Supply 230V 50Hz Total Connected Load 138.66 kW Dkjdpfx Aksw Rpzqjmju Approx Dimensions 7,925 x 5,320 x 3900mm (LxWxH) Approx Weight 10,400 kg Notes All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: used, Year of construction: 2013, Used for the production of inner liners, vacuum forming machine BL 2200x900x600-NG-EL-PF-DX, year of manufacture 2013, serial number C1091, voltage 380V-N-50Hz+PE. Machine Specifications Summary Forming & Sheet Dimensions Maximum inside frame dimensions: 2205 × 905 mm Mould base maximum size: 2200 × 900 mm Mould base minimum size: 700 × 500 mm Maximum sheet size: 2290 × 960 mm Minimum sheet size: 790 × 560 mm Maximum mould height: 850 mm (600 + 250 mm) Maximum formed part height: 600 mm Maximum sheet stack height: 1000 mm Sheet support stack height: 144 mm Electrical Power Requirements Upper heating power: 93.8 kW Lower heating power: 80.3 kW Forming motors: 23.2 kW Sheet conveyor motor: 4.6 kW Transport support regulation motors: 0.6 kW Sheet centering device motors: 0.36 kW Sheet pick-up motors: 3.0 kW Cooling fan motor: 5.5 kW Extraction fan motor: 0.25 kW Unloading transfer motors: 3.0 kW Guillotine group motors: 8.1 kW Conveyor belt motor: 0.75 kW Thermoregulator units: 25.65 kW Chiller unit: 16.25 kW Ancillary equipment maximum consumption: 3.89 kW Maximum installed power: 269 kW Typical operating power (50% load): 135 kW Pneumatic System Forming tank capacity: 2 m³/cycle Pneumatic system pressure: 600 kPa Air consumption (VGS): 0.85 m³/cycle Air consumption (movements): 0.35 m³/cycle Air consumption (cooling): 0.90 m³/cycle Air consumption (pressure forming at 200 kPa): 3.2 m³/cycle Total air consumption: 4.85 m³/cycle Mechanical Characteristics Forming platen closing force: 400,000 N (400 kN) Maximum mould + reduction frame weight: 2,200 kg Machine weight: 30,000 kg (30 tonnes) Water Chiller Unit Chiller tank capacity: 240 litres + piping Water inlet pressure: > 0.1 kPa Water outlet pressure: 0 kPa Water inlet temperature: 20 to 25 °C Utilities Required Electrical supply: 269 kW installed load Compressed air: 600 kPa pressure, 4.85 m³/cycle consumption Cooling water: 20-25 °C inlet temperature Chilled water tank: 240 litres minimum capacity Fully automatic thermoforming machine designed to shape plastic sheets up to 2200 × 900 mm with a maximum forming depth of 600 mm, suitable for high-capacity industrial applications. Thermoformer details: Forming area 2200mm x 900mm Max forming depth 600mm 3x loading stations. 1 x heating station. - (pre-heating, final heating, upper and lower elements) ceramic/quartz infrared elements Pressure and vacuum forming operation. 4 x side trimming presses. (rotary) Guillotine. Scrap collection end station. Automation: Fully automatic batch processing with operator control panel featuring manual/automatic modes. Industrial-grade construction with multiple access doors, observation windows, and integrated ventilation heat management. Djdpfxjzumrme Akmeku Applications - High-throughput environments; this COMI machine is ideal for producing refrigerator liners, door panels, containers, and other thermoplastic components where consistent quality, large sheet handling, and repeatable forming cycles are essential.

Condition: used, Year of construction: 2014, COMI 1092 Door liner thermoforming machine, Thermoformer HEDL 2000x800x200, Year of Manufacture 2014, Serial Number C1092 Machine Specifications (List View) Forming & Mould Dimensions Maximum inside frame dimensions: 2004 × 804 mm Maximum moulded part height: 150 mm (male mould) / 50 mm (female mould) Maximum mould base dimensions: 2000 × 800 mm Minimum mould base dimensions: 600 × 500 mm Coil width range (min/max): 580 to 900 mm Mechanical Characteristics Lower die holder force: 40,000 kg Machine weight: 20,000 kg (20 tonnes) Machine dimensions: See Drawing LO-029-14-01 Heating System Upper heating power: 168 kW Thermoregulator power: 24.99 kW (3 × 8.33 kW) Motors & Drives Forming motor power: 12 kW Vacuum pump motor power: 7.8 kW De-reel device motor power: 0.37 kW Sheet conveyor motor power: 8.17 kW Transport regulation motor power: 1.1 kW Fan motor power: 3.0 kW (4 × 0.75 kW) Transfer unloading motor power: 3.0 kW (2 × 1.5 kW) Scrap cutting motor power: 2.2 kW Moulded-part unloading belts motor power: 0.5 kW Cooling & Auxiliary Equipment Chiller power: 28.75 kW Auxiliary equipment maximum power: 4.12 kW Electrical Requirements Maximum installed power: 264 kW Typical operating power (50% load): 132 kW Pneumatic Requirements Pneumatic operating pressure: 6 bar Air consumption: 2,000 N litres/cycle Water Requirements Water temperature: 25 °C Water pressure: 2 to 3 bar . Fully automatic thermoforming machine designed to shape plastic sheets up to 2000 × 800 mm with a maximum forming depth of 150 mm (200 mm), suitable for high-capacity industrial applications. Thermoformer details: Forming area 2000 × 800 mm Djdpfxozumwcs Akmjku Max forming depth 150 (200) mm Heating station – ONLY Upper heater, heater length fully configurable, fulfils pre-heating and heating functions. Pressure and vacuum forming operation. Trimming press. Scrap collection end station. Industrial-grade construction with multiple access doors, observation windows, and integrated ventilation heat management.

Condition: good (used), Year of construction: 1990, operating hours: 45,350 h, machine/vehicle number: 1537, Hybrid machine for sheet or coil thermoforming. Equipped with a BE-type plate feeder without preheating. Equipped with a PR-type coil unwinder. Equipped with an upper and lower table. Managed by a Schleicher PDPF order manager. Quick clamping of reduction frames and tooling maximum width 700 mm maximum plate size 1000x700 maximum sheet thickness 10 mm Dodpfxstv Ivzs Akmsku We take care of dismantling and loading onto your truck, which is available for collection.

Year of construction: 2015, condition: good (used), Description Features - PCB Control Board - PCB Control Panel to Clear Inform Error Message - Well Heating Blade System to Ensure Film Clean Cutting - Well Heating Elements to Ensure Fast and Stable Heating to Achieve Perfect Shrinking Dkodovk Upvspfx Akmou Specifications Manufacturer EKH Model -455 Condition Used Power supply 220/230/240V., 50/60HZ., 1-PHASE Maximum consumption power 3.77Kw Effective power consumption 1.6-2.3Kw Sealing dimension Depth 420mm X Length 550mm Maximum height of package 250mm Machine dimension Length 1320mm X Width 820mm X Height 645mm Maximum dimension of film 600mm X Ø250mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Dkodpfx Aezrnkrjkmsu Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: excellent (used), Make Illig Model RV 53d Year 2012 Condition Excellent Dksdpfez Ecu Nex Akmeu Stock Number 00047 Approx Hours 16.700 Delivery Date November 2026 Stations Forming, Cutting and Robot Stacking Max Forming Area 500 x 365 mm Min Forming Area 300 x 160 mm Depth of Draw 100 / 40 mm Max Mould Closing Force 400 kN Forming Pressure 3 bar Max Cycles/Min 45 Total Width incl Control Cabinet 2600 mm Total Length incl Roll Stand 6750 mm Total Height 2590 mm Total Weight 6500 kg Notes All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: used, Year of construction: 1993, COMI/RIGO 0599 inner liner thermoforming machine, SL200x90 NG DX Machine Specifications Forming & Tool Dimensions Maximum mold base dimensions: 2000 × 900 mm Minimum mold base dimensions: 800 × 480 mm Maximum frame interior dimensions: 2000 × 900 mm Maximum mold height: 800 mm Maximum molded part height: 550 mm Maximum sheet stack height: 1000 mm Maximum sheet support stack height: 180 mm Heating System Upper heating power: 89 kW Lower heating power: 78 kW Upper preheating power: 52 kW Lower preheating power: 46.8 kW Motors & Drives Oil pump motor power: 30 kW Vacuum pump motor power: 12 kW (3 × 4 kW) Sheet transport motor power: 1.6 kW Djdpfx Ajzumuuokmoku Transport regulation motor power: 1.1 kW Sheet moving motor power: 0.25 kW Fan motor power: 0.50 kW (2 × 0.25 kW) Pyrometer motor power: 0.18 kW Discharge transfer motor power: 0.70 kW Single-blade motor power: 5 kW Cooling & Utilities Chiller power: 78 kW Auxiliary equipment maximum consumption: 3.87 kW Electrical Requirements Maximum installed power: 399 kW Vacuum System Vacuum pump capacity: 570 m³/h (3 × 190 m³/h) Vacuum tank capacity: 4,000 L (2,000 + 2,000 L) Water Requirements Water inlet temperature: 12-20 °C Water inlet pressure: 2-3 bar Closed-circuit water maximum flow rate: 130 L/min Pneumatic & Hydraulic Requirements Pneumatic operating pressure: 6 kg/cm² Hydraulic operating pressure (min/max): 110 / 140 kg/cm² Mechanical Characteristics Upper die clamping force: 9,000 kg Lower die clamping force: 9,000 kg Oil quantity for operation: 480 L Air consumption (movement = 700, cooling = 800): 1,500 N litres/cycle Machine weight: 25,000 kg (25 tonnes)

Condition: excellent (used), Year of construction: 2002, Manufacturer GN Model 3625D Year 2002 Condition Used Stock Number 00043 Dkedpfx Asziw Rvekmju Maximum forming area 915 × 635 mm (36" × 25") Maximum film width 965 mm (38") Maximum forming depth 125 mm (5") Material thickness Typically 0.2–1.8 mm (material dependent) Drive system Servo-driven platen and sheet transport Air requirements 6–8 bar (90–120 psi) Max output Up to 35–40 cycles/min

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Table size 1200mm x 600mm, spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, Dksdpfx Ajz Eh Nljkmsu 43M/min rapids, Spindle taper BT40, 30 station ATC, through spindle coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 2013, XYZ 1630 SLX CNC Lathe New 2013. Swing 400mm x 760mm B.C. Spindle speeds & bore 150- 2500rpm & 54mm. C/w 3jaw chuck, quick change tool-post. Dkedpfx Aez E R N Uekmou

Condition: excellent (used), Year of construction: 1999, CFS 620 | Thermoforming Packaging Machine Brand: CFS Model: 620 Dsdpfx Aoy Hl Ndskmoku Machine number: 625/0118 Year of manufacture: 1999 Power supply: 230 V, 3 phase, 50 Hz Current consumption: 23/25 A Module dimensions: Main module: 3350 mm x 1300 mm x 1900 mm Additional module: 3300 mm x 1050 mm x 1100 mm The industrial CFS 620 thermoforming machine is an advanced unit designed for the automatic forming of packages from rigid or flexible film and for packaging food and technical products. The machine operates in a continuous cycle, performing the processes of lower film forming, filling, vacuum or protective gas flushing, sealing, and cutting of finished packs. Thanks to its modular design with a total length exceeding 6 meters, the unit offers a large loading area and high production efficiency.

Condition: excellent (used), XYZ SLX 425 x 1.25m CNC Lathe Year 2016 Serial number L769 ProtoTRAK SLX Distance between centres 1,250 mm Maximum cutting length 1,080 mm Swing over bed 480 mm Swing over cross slide 257 mm Swing in gap 700 mm Gap in front of faceplate 170 mm Cross slide travel 230 mm Spindle bore 80 mm Spindle nose D1-8 Camlock Spindle motor 7.5 kW / 10 hp Spindle speed range 25–2,500 rpm in 3 ranges Tailstock quill travel 160 mm Tailstock taper No. 5 Morse taper Tailstock quill diameter 75 mm Bed width 370 mm Dkodpsz N Ambsfx Akmou

Year of construction: 2022, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 22015404-1, The blister packaging machine is in very good condition and is fully operational and functional. A test run of the machine and inspection of its operation are possible. The machine has been regularly maintained and serviced. Upon sale, all available additional spare parts and replacement components will be included. Dsdpfxoyuc Hzo Akmjku In addition to the blister packaging machine, the package also includes the following components that were additionally ordered alongside the basic machine. Camera inspection system for blister monitoring, a machine for secondary packaging of blisters SDZ-100, and a chiller for cooling the film from which the blisters are thermoformed. You can produce blister "0" 120x70x15 and blister "00" 120x70x30. All machines are supplied with the relevant technical documentation and CE certificates. All technical specifications, dimensions, the machine layout, as well as catalogs and instructions can be found in the attached PDF files.

Condition: good (used), functionality: fully functional, Webomatic packaging line, consisting of: 1. Two-chamber vacuum machine Brand Webomatic Model PNC 20A-D-M2 Machine number: 555912033 Voltage 220/380 V, 50 Hz, 3.5 A Seal length: (2x) 800 mm Chamber dimensions: 800 mm x 600 mm Dksdowatw Nopfx Akmju Overall dimensions: 2000 mm x 1100 mm x 1350 mm 2. Shrink tunnel Brand Webomatic Model STP 60/80 D+E Number: 72911302 Voltage 380 V, 3 Ph, 50 Hz, 35 A Dimensions: 1300 mm x 900 mm x 1400 mm 3. Conveyor roller Dimensions: 2000 mm x 700 mm x 800 mm

Condition: used, Year of construction: 2003, Used for the production of door liners by thermoforming. Year of manufacture: 2003 General Maximum roll diameter: 1200 mm Maximum roll width: 850 mm Minimum roll width: 570 mm Sheet loading height: 1750 mm Sheet feeding height: 1750 mm Discharge height of thermoformed product: 1750 mm Machine overall dimensions: See layout drawing Roll Unwinding Station Sheet loading: Manual Roll change: Automatic (pneumatic) Sheet pulling: Motorized Heating Station Format change: Motorized Format change stroke length: 500 mm Oven emptying in emergency: Automatic (pneumatic) Upper panel radiators: 134 × 300 W + 45 × 600 W Upper panel radiator power: 67,200 W Lower panel radiators: 112 × 600 W Lower panel radiator power: 67,200 W Forming Station Moving level of the mold holder Maximum stroke of pneumatic cylinders: 750 mm Closing force of pneumatic cylinders: 687.5 daN × 4 Clamping Ring Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders at 6 bar: 735 daN × 2 Pre-Stretching / Cooling Dome for Thermoformed Product Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders: 687.5 daN × 2 Electric fan power: 0.55 kW × 4 Vacuum System Pump capacity: 240 m³/h × 2 Pump motor power: 5.5 kW × 2 Tank capacity: 1200 L × 2 Pneumatic System Operating pressure: 6 bar (±10%) Air intake connection: Water System Operating pressure: 2.5 bar (±10%) Water intake (flow to chiller, closed-loop connection): DN ½" Temperature: 15°C (±10%) Electrical System Three-phase electrical voltage + neutral + earth: 400 V (+10% / -6%) Dkodpfx Akezumnzemou Frequency: 50 Hz Installed power: 280 kW Current: 465 A Roll feed thermoforming machine currently used in the manufacture of refrigerator door liners. Thermoformer comprises: Roll Unwinding Station. Heating Station - Upper and lower pre-heaters and heating elements. Forming Station - Table closing force of daNx2: 735. Clamping Ring. Pre-Stretching / Cooling Dome. Vacuum System. Pneumatic System. Full workshop manuals. Machine footprint of approximately 10m x 3 m x 5m.