Used Weiler E40 Und E 50 for sale (90,137)

Condition: like new (used), Year of construction: 2015, operating hours: 50 h, functionality: fully functional, Robot KUKA Robot KR 600 R2830 (50.3 operating hours) Year of manufacture: 09/2015 Dsdpey I Utnefx Ad Nsut Payload: 600 kg Reach: 2826 mm Smart Pad: KRC4 00-168-334 Controller: KRC4 Cables: yes Color: orange Operating hours: 50.3 h Condition: pristine condition, only operated for testing purposes Note: Robot was used for testing in a development center

Condition: used, Year of construction: 1995, operating hours: 1,589 h, machine/vehicle number: 558B, Equipment: all wheel drive, - Wunderschoner Liebherr shovel loader is in a really good condition directly from the military (Swiss-Army) Well maintained and cared for, - The 508 is a really solidly built wheel loader, just right quality for the military. - Is also no source of oil, makes NO oil stains, is almost as good as new - The cab is glazed all around for a good all-round view! ! - The Liebherr L508 is equipped with: Quick change device 0,8m? Bucket, Pallet forks with log push, Additional hydraulic connections for additional equipment, All-wheel drive, Articulated steering 40 degrees very maneuverable with a small turning circle - Tire size 12.5 R 20 off-road profile, tires are foamed (you can not drive flat) Snow chains are also included, Hydro drive, Highest speed 25 Km / H, Displacement 2732 cm? 4 cylinder series Deutz BF4L1011 T with Turb,24Volt power supply, - TUV can be made NEW on request for an extra charge !!! - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Call 0049 (0)2248 Greetings, your Philipp from the Hanfbach valley Dsdpfx Adeqx S Alj Njut

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 50 h, load capacity: 3,000 kg, lifting height: 5,000 mm, free lift: 1,810 mm, fuel type: diesel, mast type: triplex, construction height: 2,420 mm, power: 41 kW (55.74 HP), drive type: Diesel, Diesel forklift truck Load center: 500 Mast type: Triplex Transmission: Torque converter Condition: As new Dodpfx Adjy H Tifo Neut Technical condition: Very good Front tire type: Superelastic Rear tire type: Superelastic Description: Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heating, load guard, full cabin, CE certificate, scale, interior mirror, LED.

Condition: ready for operation (used), Year of construction: 2001, Offered is a WrapAroundPacker 420 / Combiline. Application area: Packaging of individual containers, Cycle rate max: 50cycles/minute, Format flexibility: 0.33l, 0.5l, Preserving jars, Adhesive system: Spot or line hot melt application system, Inspection by appointment possible. Dodpfx Adoy Dgq De Nsut

Condition: used, mileage: 430,000 km, power: 257 kW (349.42 HP), first registration: 11/2005, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: beige, gearing type: mechanical, emission class: euro4, Year of construction: 2005, Equipment: ABS, air conditioning, electronic stability program (ESP), MAN TGA 18.350 TANKER ? ESTERER BODY ? TOP AND BOTTOM LOADING ? 2 CHAMBERS ? ----VEHICLE HISTORY ? VIDEO AVAILABLE ON REQUEST ? VEHICLE CONVERTED TO PMK 2 IN 2010 VEHICLE EQUIPMENT Duodpfjytzr Tjx Ad Njt ? MANUAL TRANSMISSION ? ENGINE BRAKE ? CRUISE CONTROL ? DIFFERENTIAL LOCK ? AIR CONDITIONING ? REFRIGERATOR ? REVERSING CAMERA ? COMFORT SEATS ? SEAT HEATING ? FRONT AXLE LEAF SUSPENSION ? REAR AXLE AIR SUSPENSION ? TRAILER COUPLING TANK BODY ? ESTERER TANK BODY ? 2 CHAMBERS TOTAL CAPACITY: 14,040 LITERS CHAMBER 1: 6,670 LITERS CHAMBER 2: 7,370 LITERS ? TOP AND BOTTOM LOADING POSSIBLE FURTHER DETAILS ? TIRE SIZE: 315/80 R22.5 ? VERY GOOD TIRES ? IMMEDIATELY AVAILABLE ? READY FOR IMMEDIATE OPERATION EXPORT / NOTE EXPORT SALE ONLY WITH DEPOSIT MIN. €500 – €2,000 FOR SALES TO EU & NON-EU COUNTRIES, A DEPOSIT OF AT LEAST €500 / €1,000 WILL BE CHARGED. EXPORT DECLARATION EXW POSSIBLE WITHIN 10 MINUTES (APPROVED EXPORTER). LICENSE PLATES FOR 5 DAYS, 15 DAYS, 30 DAYS, AND 15-DAY AUSTRIAN PLATES AVAILABLE. VEHICLE RESERVATIONS ONLY VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. SUBJECT TO CHANGES, ERRORS, AND PRIOR SALE. LEGAL NOTICE: THIS SALES ADVERTISEMENT DOES NOT CONSTITUTE AN OFFER WITHIN THE MEANING OF §145 BGB. ALL INFORMATION PROVIDED WITHOUT GUARANTEE OR WARRANTED CHARACTERISTICS.

Condition: excellent (used), Year of construction: 1998, turning diameter 410/ 440 mm turning length 950 mm Dedpfx Aeyrh Apjd Njut control Siemens / Weiler D2 workpiece weight max 900 kg spindle head Gr 6 MK 6 spindle bore 54 mm face stroke 230 dia. of quill MK 4 mm quill stroke 120 mm centre height 200 mm thread pitch max. in mm 0,1 - 250 mm spindle turning speed - stepless 1 - 3000 U/min total power requirement 12 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,3 x 1,5 x 1,8 m

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 103000050, load capacity: 250 kg, Equipment: documentation/manual, The MiR250 is a more flexible AMR – compact and powerful. The MiR250 features a small footprint of just 580 x 800 mm and a height of only 30 centimeters. Despite its size, it easily transports loads of up to 250 kg and can travel at speeds of 2 meters per second. This agility sets it apart from all other AMRs on the market and makes it particularly adaptable to demanding environments. Thanks to its compact design, it can navigate spaces with a width of just 80 centimeters. This means that doors and elevators, which might pose a challenge for other mobile robots, are no obstacle for the MiR250. The MiR250 is engineered for durability and can operate around the clock, with a battery that can be replaced quickly. Additionally, it meets the latest safety standards – which is why we believe it is the safest AMR on the market. It has so far only been used in laboratory conditions and has virtually no operating hours. Accessories: Djdpfx Asyf Etxjd Neut - Cable Charger Lite 48V, 3A, wired charger - WISE WLAN EA module 4060, 4x digital inputs, 4x relay outputs

Condition: like new (used), functionality: fully functional, mileage: 1 km, power: 170 kW (231.14 HP), fuel type: diesel, empty load weight: 10,500 kg, overall weight: 14,100 kg, tire size: 395, axle configuration: 4x4, wheelbase: 3,850 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2026, Equipment: ABS, additional headlights, air conditioning, all wheel drive, crane, cruise control, differential lock, hydraulics, navigation system, onboard computer, soot filter, trailer coupling, Kranimog Special Edition KARL – Special Model! Unimog U5023 with HMF crane featuring 6 extensions and WINCH! – Optionally available with work basket! The Unimog boasts an overall height of just approx. 3.68 m with large Michelin tires! Key Equipment – further details upon request – of the Unimog: - Central tire inflation system - Off-road reduction group - EAS automatic shift - Transmission power take-off - Rear crossmember for increased trailer load - Trailer coupling - Air conditioning - Driver's air-suspended seat - Front and rear view cameras, monitor Dusdpfx Aekqfq Asd Nst - Generation 2 digital tachograph - Vertical exhaust system - High-performance engine brake HMF crane 1620 with 5 extensions and winch – WORK BASKET available as an option! ==> Scharmüller trailer drawbar with truck coupling and/or car coupling – with truck approval (a specialty, exclusive to us) Combined with the Scharmüller crossmember and drawbar, the following towing capacities are possible: - Trailer with continuous braking system: 21,000 kg - Trailer with overrun brake: 3,500 kg - Trailer without brakes: 750 kg - Central axle trailer: 13,000 kg with support load: 1,000 kg  This makes the U5023 a multifunctional towing vehicle, whether for passenger car trailers, central axle trailers, or classic turntable trailers – for every required height, the right coupling is available!  Ideal for crane operation, as the Unimog itself is compact and can tow very long trailers.  Our special model also features a working group gearbox: perfect for precise maneuvering, enabling clutch-friendly operation and always providing an appropriately selectable speed as needed. Offer subject to change, only while stocks last – prior sale reserved. The Unimog is still occasionally in use, mileage may vary!

Condition: new, maximum load weight: 2,555 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 950 mm, total width: 1,930 mm, total height: 1,860 mm, Year of construction: 2026, Humbaur three-way tipper with electric pump, black steel side panels 350 mm and aluminium extension 600 mm – HTK 3500.31 Base price – €10,400 Special promotion price – €9,100 incl. 19% VAT, incl. black steel side panels 350 mm, aluminium extension 600 mm (valued at €1,920), incl. transport costs (self-collection in Nuremberg), including registration documents! Description: The HTK three-way tipper impresses not only with the high-quality standards you have come to expect from us. It comes equipped with a practical hand pump, which can be replaced at any time by an electric hydraulic pump if required. From a permissible total weight of 3,000 kg, the electric and hand pump are fitted as standard. This makes tipping your load no longer a challenge, but effortless! Technical specifications: * Trailer type – tandem axle * Construction – aluminium * Rear tipper – 45° * Three-way tipper – 45° * Own weight – 945 kg * Total weight – 3,500 kg * Payload – 2,555 kg Dusdsyxz Akepfx Ad Nst * Internal length – 3,140 mm * Total length – 4,500 mm * Internal width – 1,750 mm * Total width – 1,930 mm * Internal height – 350 mm + 600 mm aluminium extension * Total height – 1,260 mm + 600 mm aluminium extension * Loading height – 760 mm * Tyres – 13 inch Standard equipment: * V-drawbar, hot-dip galvanized * Chassis and tipping platform hot-dip galvanized * Tipping platform made of one-piece steel construction * Hand pump, with optional electric hydraulic pump available from 3,000 kg GVWR; both electric and hand pump as standard from 3,000 kg * Humbaur multifunctional lighting system * Anodised aluminium drop sides, fully removable * Rear tailgate with swing function * Lashing rings mounted in deck, lashing capacity 800 kg per ring * Jockey wheel * Channel prepared for easy retrofitting with aluminium ramps

Condition: used, Ferromatik mixing screw Ø 70 mm for IU2495 and IU2650- removed from Ferromatik K-Tec 450 - removed from IU2495 Dsdpfx Adsyxg Tbj Nout - removed from running machine - fully functional- inlet: 69.80 mm - center: 69.80 mm - outlet: 69.80 mm - total length: 225.80 cmmanufacturer: Ferromatik Milacron

Condition: used, Year of construction: 2011, Senke (see images in the attachment) Dujdpfsxuq Nijx Ad Nst Gantry Eagle 500 Year of manufacture: 2011 Travel paths: x/y/z = 525x400x450 Tool changer: 24 positions Weight: 5000 kg EDM machine Ingersoll OPS 600, year 2001

Condition: used, Year of construction: 1996, For sale: a wire EDM machine AGIE Agiecut 250 HSS, year 1996, and a sinker EDM machine AGIE Agietron 3U. Dodpfx Adoyu R A Do Neut

Condition: used, Year of construction: 1997, Engel ES 4550/650 Year of manufacture: 1997 Weight: 44,000 kg Clamping force: 6,500 kN / 650 t Dimensions: 2,600 x 11,300 mm (W x L) Control system: CC100 Design: Tie-bar The machine is still in operation and has been maintained at short intervals during production. It remains connected and is fully functional. Viewing and testing on site is possible. Complete documentation is available. The machine is equipped with a Sepro “Success 33” linear extraction robot. Technical specifications: Operating voltage: 400 V 3~ 50 Hz Screw diameter: 90 mm Max. dosing stroke: 390 mm L/D ratio: 22 Nozzle thread: M45x3 Shot weight (PS): 2,331 g Tie bar spacing (horizontal): 1,025 mm Tie bar spacing (vertical): 925 mm Max. opening stroke: 900 mm Min. mould height: 400 mm Max. mould height: 920 mm Engel ES 330/80 Year of manufacture: 1991 Weight: 4,000 kg Clamping force: 800 kN Dimensions: 3,910 x 1,380 x 2,050 mm (L x W x H) Control system: CC100 Design: Tie-bar, toggle lever The machine is in good condition and has been maintained at short intervals during production. It remains connected and is fully functional. Viewing and testing on site is possible. Complete documentation is available. Screw, heating cylinder tube, and RSP were replaced in 2022 by Plasma Kunststofftechnik. Technical specifications: Operating voltage: 400 V 3~ 50 Hz Dsdpfxoyu Rzyj Ad Nsut Screw diameter: 45 mm Screw geometry: 3-zone Max. dosing stroke: 160 mm Nozzle thread: M28x1.5 Max. injection pressure: 1,300 bar Shot weight (PS): 239 g Tie bar spacing (horizontal): 405 mm Tie bar spacing (vertical): 345 mm Max. opening stroke: 430 mm Min. mould height: 150 mm

Condition: used, maximum load weight: 30,400 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2008, next inspection (TÜV): 02/2026, Year of construction: 2008, Equipment: ABS, KRONE REFRIGERATED TRAILER CARRIER VECTOR ROLLER SHUTTER LIFT AXLE AND STEERING AXLE TÜV LOW USAGE ----VEHICLE HISTORY * 2nd owner * German vehicle * Video available on request VEHICLE EQUIPMENT * TYPE: SD * Disc brakes * BPW axles * 1st axle is a lift axle * 3rd axle is a steering axle Duedpfexlmbcex Ad Nst * Roller shutter door * Air suspension * Carrier Vector refrigeration unit * Partition wall * Operating hours will be provided * Permissible total weight: 36,000 kg * Unladen weight: 5,600 kg * Payload: 30,400 kg * Tire size: 385 / 65 R 22.5 ---- * EXPORT SALES ONLY WITH DEPOSIT (DEPOSIT) MIN. €500 - €2,000 ----EXPORT DECLARATION CUSTOMS EXW POSSIBLE IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS LICENCE PLATES AND 17 - 21 DAYS AUSTRIAN LICENCE PLATES EURO 1 PLEASE ONLY RESERVE VEHICLES VIA EMAIL FUNCTION ORAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Changes, errors, and prior sale reserved! You can find more vehicles on our homepage: Sale is exclusively subject to our General Terms and Conditions – see homepage. Important notice – Important information: Despite careful verification of all details in our offer, errors may occur. Some may result from transmission errors within different platform providers' systems. Therefore, we point out that all information is provided without warranty and does not constitute any legal claim. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is for information purposes to initiate a contract. All information is non-binding and does not represent warranted properties.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine/vehicle number: 30610, We are offering this very well-maintained E. Bickel K.G. Heilbronn HK 3/50 creasing and perforating machine, year of manufacture 1978. Details: • Working width: 50 cm • Machine serial no.: 30610 • Supplied with 2 additional perforating combs Dedpfxoytxulj Ad Neut • Robust industrial quality, reliable for paper and cardboard processing • Location: Salzburg, Austria • Viewing possible by appointment • Suitable for: bookbinderies, printing houses Price: Negotiable €2,250 Electric Creasing Machine E. Bickel HK3/50 – 50 cm Working Width, 2 Perforating Combs, 1978 If you have any questions or need further information, please feel free to send us a message or call us. 10 machines available – special total price when purchasing all. Prompt transaction preferred!

Condition: used, Year of construction: 1995, turning diameter 720 mm turning length 3000 mm control Siemens 805 turning diameter over slide 430 mm turning speeds 1800 U/min tailstock quill taper MT 6 steady 3 Stück main drive motor 36 kW z-axis 3050 mm x-axis 410 mm swing diameter over slide rest 430 mm spindle motor 28 kW workpiece weight 3000 kg spindle passage 106 mm 3-jaw-chuck diameter 305 mm total power requirement . kW weight of the machine ca. 6 t dimensions of the machine ca. 4x2,4x2 m Steady rest 1: Diameter: 120-300 mm Steady rest 2: Diameter: 220-400 mm Steady rest 3: Diameter: 350-500 mm Dsdpfx Adsyqvbds Nout Chuck: Diameter: 315 mm Maximum workpiece weight: 3 t (with steady rest) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, mileage: 1,200 km, power: 18 kW (24.47 HP), first registration: 01/2018, fuel type: diesel, overall weight: 2,000 kg, color: orange, gearing type: mechanical, suspension: other, number of seats: 1, operating hours: 1,200 h, Equipment: air conditioning, cabin, , diesel First registration 02.01.2018 18 kW cubic capacity 1,261 cm³ 1,200 operating hours Front loader Front hydraulics Front PTO Hydrostat Cab air conditioning 1 seat Rear PTO Shovel Front loader permissible total weight 2,000 kg The vehicle had a special purpose registration on 23.11.2017. FOR US THE CONDITION AND THE FEEL OF THE VEHICLE ARE DECISIVE, THE PRICE IS IN SECOND PLACE If you have any further questions, please do not hesitate to contact Mr. Faller at the number. //*EXCHANGE, TRADE-IN OR LOAN OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* Further offers can be found on our homepage: The description and data given do not constitute a guarantee and are not binding. The purchase contract concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Dujdjvicvhspfx Ad Net

Condition: used, Year of construction: 2002, CNC machining center Deckel Maho DMF 250 linear, year of manufacture 2002, and DMC 63 H, year of manufacture 2002 Djdpoyphl Ejfx Ad Nsut

Condition: used, Year of construction: 2000, 2 Schmalz vacuum lifters, year of manufacture 2000 Dusdpfx Ajxxv Eqjd Nst The lifting devices were stored in working condition but are no longer needed. The smaller unit has a lifting capacity of 500 kg, the larger one 2,000 kg. The price is per unit. Only the vacuum lifters are being offered, not the other items visible in the photos (such as tires, pallets, trolleys, metal buckets, etc.). Collection in Bremen. _____ Our terms and conditions apply; furthermore, the seller is not liable for typographical or data transmission errors. The appearance of the items offered corresponds to their age and the images provided. The technology and wear of the items offered are consistent with their age. Used machines are sold exclusively to commercial buyers and without any warranty.

Condition: used, Year of construction: 2007, - Sumitomo Demag IntElect 210/580-1000, year of manufacture 2009: 6260 x 1555 x 2219 mm (L x W x H), net weight 11,000 kg - Sumitomo Demag IntElect 210/580-1000, year of manufacture 2009 (excluding pictured handling equipment / temperature control units / material feed [hopper, conveyor]). Dodpfx Asw E N S Tod Neut Designation: SGM Operating hours Cycle counter Cylinder heating Electric drives Sumitomo Demag IntElect 150/520-610 29,125 26,530 3,562,329 Sumitomo Demag IntElect 210/580-1000 27,297 25,717 3,450,308 Injection moulding machine Sumitomo Demag IntElect 150/520-610, year of manufacture 2007 (excluding pictured handling equipment / temperature control units / material feed [hopper, conveyor]). Designation: SGM Operating hours Cycle counter Cylinder heating Electric drives Sumitomo Demag IntElect 150/520-610 29,125 26,530 3,562,329 - Sumitomo Demag IntElect 150/520-610, year of manufacture 2007: 5348 x 1468 x 2400 mm (L x W x H), net weight 7,400 kg. Demag 150: Screw diameter Ø 45 mm

Condition: good (used), Year of construction: 2012, Exposé for Hall Rental Production and assembly hall ready for occupancy Fully equipped - 850 m² - Compressor system available - 40.0 t overhead crane (2 x 20 t rotating cranes) - 10.0 t overhead crane - 5.0 t gantry crane - 20.0 t overhead crane - 12.5 t overhead crane - Millutensil MIL303 spotting press - Crane hook height: 7 m Dsdjygkinjpfx Ad Neut - Truck entrance gate height: 4.5 x 5 meters - Workshop trolley with tools and lifting gear available - Foreman’s office and meeting room with air conditioning - Ladies and gents restroom - Lathe and grinding machine available - Fiber optic connection available (contract with Telekom possible) Available for immediate rent Location: 35232 Dautphetal, Industriestr. 9 Viewings by appointment possible

Condition: used, mileage: 282,100 km, power: 188 kW (255.61 HP), first registration: 09/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2025, color: white, gearing type: mechanical, emission class: euro5, * VDL roll-off tipper with platform, tarpaulin and tail lift body * Radio Dedoxhbkqjpfx Ad Nout * Air conditioning * 3-seater * Manual transmission * 2nd axle steered * Platform and tarp superstructure with tail lift, electric side tarp -----Internal vehicle number: 11365 + 11365a1 + 11365a2----Subject to errors & prior sale WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp WhatsApp: German, English -- WhatsApp: German, English, Arabic

Condition: excellent (used), Year of construction: 2001, Length:1200mm Width:800mm Height:1200mm Duedpfxex Tp Dxo Ad Net Weight:290kg

Condition: used, Year of construction: 2007, operating hours: 41,000 h, spindle bore: 165 mm, turning length: 3,000 mm, turning diameter: 830 mm, turning diameter over bed slide: 1,200 mm, quill stroke: 400 mm, quill diameter: 140 mm, torque: 8,000 Nm, Technical Specifications ----- Max. turning length: 3,000 mm Turning diameter: 830 mm Max. turning diameter over bed: 1,200 mm Bed width: 600 mm Dedpsv Nhxzofx Ad Nout Spindle bore: 165 mm Spindle head DIN 55027 Gr 15 Chuck: Forkardt 3KS 800 mm Speed range: 1 - 280 / 4 - 900 rpm Gear ratios: 2 Torque: 8,000 Nm Number of turrets: 1 Sauter 4-station head turret for 140 mm chucks Tailstock Quill diameter: 140 mm Quill stroke: 400 Features ----- Electronic handwheel Forkardt 3KS 800 mm hydraulic power chuck Chip conveyor

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,600 mm, fork length: 1,200 mm, empty load weight: 8,970 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN OPERATION Our forklifts are overhauled in accordance with FEM-4.004 and current safety standards to ensure maximum quality and your safety. From the chassis to the battery, including drivetrain, brakes, steering, and electrics—each vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Strict technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support—even after your purchase Djdpfx Aoxrgtfjd Nsut Test and consult on site now—we will find the right solution for you. Industrial Truck Specifications: Manufacturer: Heli Model: Counterbalance Forklift CPCD50 Drive type: Diesel Load capacity: 5,000 kg Year of manufacture: 2025 Operating hours: 0 Lift height: 4,700 mm Mast type: Triplex Free lift: Yes Overall height: 2,600 mm Fork length: 1,200 mm Unladen weight: 8,970 kg Model designation: CPCD50 Cabin equipment: Adjustable cabin heater Lighting: 2x front work lights Lighting: 2x rear work lights Lighting: Rotating beacon Lighting: StVZO – Road traffic equipment for potential (limited) public road use: indicator lights, tail lights, reverse lights, reflectors etc. Attachment: Sideshift Attachment: Additional hydraulic circuit routed to carriage