Used Wemas Vzg 65A for sale (92)

Year of construction: 1974, condition: used, functionality: unexamined, For sale: - Circular saw mill, type OS65, from a carpentry/lumber mill in very good condition. - Low operating hours, only approx. 800-1000 m³/year. Gjdoz Dn Ulepfx Aqgeuh - Clamping carriage, self-propelled. - Auxiliary carriage. - Approx. 15m of guide rails for the clamping carriage/auxiliary carriage. - Splitting wedge/outfeed rollers, not driven. - €20,000 net / plus VAT. The following are also available separately: - Log infeed system - Chain hoist with transverse conveyor Prior inspection is required.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, power: 8.75 kW (11.90 HP), pressing force: 25 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 360 mm, clearance between the columns: 800 mm, total length: 16,500 mm, total width: 10,500 mm, total height: 27,500 mm, overall weight: 2,200 kg, die cushion stroke: 160 mm, Hydraulic press PYE 25 S1M with ejector. Year of manufacture: 1987. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 25 tons. Working pressure: 16 MPa. Upper table: 450 x 360 mm. Lower table: 630 x 500 mm. Clearance: 800 mm. Gsdpfotzwxdex Aqgeuh Cylinder stroke: 500 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Lower ejector force: 10 tons. Lower ejector stroke: 160 mm. Power requirement: 8.75 kW. Weight: 2200 kg. Height: 2750 mm, Length: 1650 mm, Width: 1050 mm. Very good technical condition. The machine has undergone a complete overhaul. Machine can be inspected and tested under power.

Year of construction: 2004, condition: used, functionality: fully functional, machine/vehicle number: 04.04.40, Technical characteristics: # Payload Capacity: Free conveyor, 350 mm width / 250 mm height # Tank capacity: 1 tank, 250 L # Washing chamber capacity: spraying nozzles in all directions in 3 consecutive steps # Conveyor speed: approx. 0.4 m/min # Eco-friendly operation: Solvent-free, uses water-based detergents. # Average load weight approx. 25 kg; maximum 50 kg # Mechanical weight: 4500 Kg Electrical Equipment # Operating voltage: 400Vx3 # Connected power: 60 kW / rated current 65A Dimensions # Machine dimensions (L×W×H): 5000 × 2000 × 1700 mm Equipment consists of: # Main machine, manual loading/unloading (Loading height approx. 930 mm) Gjdpfx Aqoxx N Sdogjuh Machine status: WORKING

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 40 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 380 mm, oil tank capacity: 300 l, total length: 1,150 mm, total width: 1,750 mm, total height: 3,050 mm, overall weight: 3,200 kg, distance between stands: 800 mm, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Guedpfxswbt Uqs Aqgeh Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Height 3050mm, Length 1750mm, Width 1150mm. The technical condition of the machine is very good. The machine has been overhauled. It is possible to inspect and check the machine in motion.

Condition: ready for operation (used), machine/vehicle number: 13214814, functionality: fully functional, power: 11 kW (14.96 HP), type of input current: three-phase, pressing force: 250 t, year of last overhaul: 2010, Equipment: documentation/manual, Hydraulic press, 250 tons – fully functional, manufactured in former East Germany (DDR), model VEB Wema Zeulenroda. Gjdpfx Aqozbyxnegeuh

Condition: good (used), Rexroth SR-L1.0012.060-00, 1.65A, 264 V, 1.20Nm, 6000 Rpm servo motor. Item condition: Used, in perfect condition. Technical data: 264 V, 1.65 A, 6000 rpm, 0.80Nm. 3.0 kg. Find more servo motors – new and used – in our shop! Guedpjivdn Ijfx Aqgsh International shipping costs available upon request!

Condition: used, Wema Probst profile milling machine Guedpfxsc N N U Ns Aqgeh Main motor: 11 kW Disassembled and ready for loading.

Condition: excellent (used), mileage: 188,961 km, color: white, lifting height: 33,400 mm, Year of construction: 2000, operating hours: 26,269 h, Drivetrain Drive: Wheel Weights Empty weight: 35.900 kg Functional Lifting capacity: 5.000 kg Dimensions of cargo space: 1280 x 260 x 400 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: NL Additional information Please contact Vink Machinery for more information Gusdpfozvgliex Aqgsh = Additional options and accessories = - Counterweights - Hook blocks = Remarks = Spierings SK365-AT3 * 2000 * 26,269 operating hours * Diesel and 400 Volt drive * 3 axles * Manual transmission * 6x6x4 drive/steering * Lifting capacity 5,000 kg * Point load 1,700 kg * 33.4 lifting height * 30.4 meters horizontal reach * 188,961 km * Includes documents and maintenance history

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, pressing force: 10 t, stroke length: 400 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 500 mm, table length: 400 mm, ram plate width: 360 mm, ram plate length: 280 mm, clearance between the columns: 630 mm, total length: 1,300 mm, total width: 1,000 mm, total height: 2,350 mm, overall weight: 1,300 kg, Equipment: documentation/manual, PYE 10 S/1 hydraulic press with ejector. Year of manufacture: 1983. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 10 tons. Working pressure: 16 MPa. Upper table: 360 x 280 mm. Lower table: 500 x 400 mm. Daylight: 630 mm. Cylinder stroke: 400 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Maximum force of the lower ejector: 4 tons. Stroke of the lower ejector: 160 mm. Power consumption: 5.2 kW. Weight: 1300 kg. Height: 2350 mm, Length: 1300 mm, Width: 1000 mm. Technical condition of the machine: very good. The machine has undergone a major overhaul. Gsdowb Dhnopfx Aqgsuh

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 10258-1, Technical characteristics: - Payload Capacity: Basket size 180x170 mm, Height approx. 150 mm - Tanks capacity: 1 tank 775 L - Washing chamber capacity: 790L - Conveyor velocity: approx. 0.4 m/min - Average load weight approx. 50 kg; maximum 100 kg - Mechanical weight: 4500 kg Electrical Equipment - Operating voltage: 400Vx3 - Connection power: 35 kW / rated current 65A Dimensions - Machine Dimensions (L×W×H): 4000 × 2000 × 2000 mm Gsdpfx Aoxxkk Ijqgsuh Equipment consists of: - Main machine LPW, manual loading/unloading (Loading height approx. 930 mm) - Three-phase separator approx. 100 L/h for oil separation - Performance: Spray pressure max. 5.0 bar Machine status: WORKING

Condition: excellent (used), mileage: 192,053 km, color: blue, lifting height: 30,400 mm, axle configuration: 4x4, Year of construction: 1998, operating hours: 25,341 h, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 35.850 kg Godpfx Ajzd T R Ioqgjuh Functional Lifting capacity: 5.000 kg Dimensions of cargo space: 1280 x 260 x 400 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: NL Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Counterweights - Hook blocks = Remarks = Spierings SK365-AT3 * 1998 * 25,341 operating hours * Diesel and 400 Volt drive * 3 axles * Manual transmission * 6x6x4 drive/steering * Lifting capacity 5,000 kg * Point load 1,700 kg * 33.4 lifting height * 30.4 meters horizontal reach * 192,053 km * Includes documents and maintenance history

Condition: new, Year of construction: 2025, PLA-65A PLASMA CUTTER The machine, which is able to make fast, precise and high-quality cuts up to 25 mm, was specially developed for manufacturers of ventilation ducts, advertisers and customers using thin sheets. Together with the economic price, this machine CNC plasma cutting machines equipped with ergonomic functions have become an indispensable helper for customers in this matter industry. Technical data: Hypertherm Powermax plasma source Power: 65A Max power consumption 11 kw Speed m / min 20 X / Y / Z 1500 3000 150 working area Weight: 1000 kg Loudness: 69 dB (A) Guedpfx Ajfwmrpoqgjh Dimensions: Length: 3700 mm Width: 2200 mm Height: 1300 mm Equipment: Source - power hypertherm max 65A Controler CNC +THC PC computer

Condition: used, functionality: fully functional, machine/vehicle number: A11301310, Year of construction: 2013, operating hours: 31,521 h, load capacity: 45,000 kg, lifting height: 15,200 mm, fuel type: diesel, power: 256 kW (348.06 HP), empty load weight: 77,000 kg, drive type: Diesel, Full-container reachstacker Gusdpfjzv Amcsx Aqgeh Chassis number: A11301310 Transmission: ZF 5WG 261 Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Rear tire type: Pneumatic Description: Bönnhof steel slab handler!!!

Condition: used, maximum load weight: 53,396 kg, overall weight: 62,000 kg, axle configuration: > 3 axles, first registration: 07/2020, next inspection (TÜV): 05/2027, total length: 12,600 mm, total width: 2,470 mm, total height: 1,360 mm, Year of construction: 2020, Additional information: * Type | First axle: Bridgestone R * Tire size | First axle: 385/55 R22.5 * Tire tread depth, inner left | First axle: 70% * Tire tread depth, inner right | First axle: 70% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Bridgestone R * Type | Third axle: Bridgestone R * Type | Fourth axle: Bridgestone R * Type | Fifth axle: Bridgestone R * Tire size | Second axle: 385/55 R22.5 * Tire size | Third axle: 385/65 R22.5 * Tire size | Fourth axle: 385/65 R22.5 * Tire size | Fifth axle: 385/65 R22.5 * Tire tread depth, inner left | Second axle: 70% * Tire tread depth, inner left | Third axle: 70% * Tire tread depth, inner left | Fourth axle: 70% * Tire tread depth, inner left | Fifth axle: 70% * Tire tread depth, inner right | Second axle: 70% * Tire tread depth, inner right | Third axle: 70% * Tire tread depth, inner right | Fourth axle: 70% * Tire tread depth, inner right | Fifth axle: 70% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Maximum axle load | Fourth axle: 9000 kg * Maximum axle load | Fifth axle: 9000 kg * Price on request: Yes * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes Gujdpfxsz Ivgwj Aqgeh * Aluminum rims | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Position | Fourth axle: Rear * Position | Fifth axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brand | Fourth axle: Other * Brand | Fifth axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Brake type | Fourth axle: Disc brakes * Brake type | Fifth axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Suspension | Fourth axle: Air suspension * Suspension | Fifth axle: Air suspension * Lift axle | Second axle: Yes * Lift axle | Third axle: Yes * Lift axle | Fifth axle: Yes * Aluminum rims | Second axle: Yes * Aluminum rims | Third axle: Yes * Aluminum rims | Fourth axle: Yes * Aluminum rims | Fifth axle: Yes Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inform yourself in advance about the costs and procedures in your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors.

Year of construction: 2020, condition: used, No. 3233 Cross milling machine Wema Probst QBV 200 Used, year of construction 2020 The machine is in mint condition, less than 30 holes have been drilled. The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs. This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment. Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc. The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column. The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out. The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill. Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools Wood diameter: 60 - 200 mm Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range Motor capacity: 2.2 kW Number of revolutions: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm LWH Weight approx. 380 kg Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Gedpfxswt Abwo Aqgouh Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: used, Year of construction: 1988, machine/vehicle number: 1686, Zähler für Falzmaschinen - Counter for Folding machines Gremser VZG 10-4Year 1988 - Serial-No. 1686 with pulserless - to move Online-Video-Inspection by Skype-Video Gedpfx Aqjh Ax A Aogeuh We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, SSTOW single-sided cantilever racks – used – excellent condition. The STOW wall-mounted cantilever rack is constructed of solid, heavy-duty steel profiles (I-beams) with high strength. It is equipped with 5 arms. The cantilever rack can be expanded with additional sections (modules), adapting it to changing storage needs. Gujdpex Igwrsfx Aqgoh The offer applies to a STOW single-sided cantilever rack with 1 or 2 modules (IPE 300): Product code: MPP001696 Height: 750 cm Depth: 157 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg I-beam profile cross-section height: IPE 300 mm Net price: €959.00 net per 1 module/section. Product code: MPP001698 Height: 750 cm Depth: 200 cm Number of levels: 0 + 5 Load capacity per arm: 1500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1079.00 net per module/section. Product code: MPP001697 Height: 750 cm Depth: 217 cm Number of levels: 0 + 5 Load capacity per arm: 1500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1195.00 net per module/section. Product code: MPP001702 Height: 750 cm Depth: 157 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1,909.00 net per module/section. Product code: MPP001704 Height: 750 cm Depth: 200 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €2,129.00 net for 2 modules/sections. Product code: MPP001703 Height: 750 cm Depth: 217 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1,500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €2,429.00 net for 2 modules/sections. In addition, we have large quantities of storage racks from various companies, e.g. MECALUX, STOW, MAGO, BITO, SHAFER, WDX, SLP, DEXION PROMAG, etc., with high load capacity, available, undamaged, in very good technical condition, as well as comprehensive products for them, such as crossbars, mesh shelves, WEMA grates, bumpers, mounting anchors, etc. Of course, if you have your own transport, you can collect the goods from our warehouse in Chmielów 39-441 in Poland. * I have large quantities. * Transport possible throughout Europe. * Location: Poland

Condition: used, STOW double-sided cantilever racks – used – excellent condition. The STOW wall-mounted cantilever rack is constructed of solid, heavy-duty steel profiles (I-beams) with high strength. It is equipped with 5 arms. The cantilever rack can be expanded with additional sections (modules), adapting it to changing storage needs. The offer applies to a STOW single-sided cantilever rack with 1 or 2 modules: Product code: MPP001693 Height: 750 cm Depth: 267 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 270 mm Net price: €1069.00 net per 1 module/section. Product code: MPP001694 Height: 750 cm Depth: 270 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1239.00 net per module/section. Product code: MPP001695 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 330 mm Net price: €1569.00 net per module/section. Product code: MPP001699 Height: 750 cm Depth: 267 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg I-beam profile cross-section height: IPE 270 mm Net price: €2,079.00 net for 2 modules/sections. Product code: MPP001700 Height: 750 cm Depth: 270 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg I-beam profile cross-section height: IPE 300 mm Net price: €2,479.00 net for 2 modules/sections. Product code: MPP001701 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €3139.00 net for 2 modules/sections. In addition, we have large quantities of storage racks from various companies, e.g. MECALUX, STOW, MAGO, BITO, SHAFER, WDX, SLP, DEXION PROMAG, etc., with high load capacity, available, undamaged, in very good technical condition, as well as comprehensive products for them, such as crossbars, mesh shelves, WEMA grates, bumpers, mounting anchors, etc. Of course, if you have your own transport, you can collect the goods from our warehouse in Chmielów 39-441 in Poland. Guedpfx Aqjx Ig Hmsgoh * I have large quantities. * Transport possible throughout Europe. * Location: Poland

Condition: new, Year of construction: 2022, functionality: fully functional, Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm Gjdpoubbryofx Aqgouh - feed speed 6-34m/min - complete electrical cabinet + control panel

Condition: used, Year of construction: 2004, Technical details: pressure capacity: 10 bar Gsdpfxez Dudao Aqgeuh volume capacity: 1,1 / 0,95 m³/min. rotary speed of motor: 8500 U/min Number of working hours: 29.498 h weight: ca. 310 kg dimensions L x W x H: Kompressor: 1,5 x 0,7 x 1,5 m dimensions L x W x H: Kälte Trockner: 0,45 x 0,45 x 0,5 m On a steel structure, welded, the feet are stabilized with rubber feet, stand: Compressor: -15 bar working pressure -speed max. 8.500 rpm. -Cooling air 980 m³/h -volume flow at 7.5 bar = 1.1 m³/min. and at 10 bar = 0.95 m³/min. Refrigeration compressed air dryer type 406AP: -volume flow 65 m³/h -Cooling air demand 450 m³/h -refrigerant R 134a -compressed air perm. min./max.: 2 / 16 bar -pressure perm. refrigerant min./max.: 15 / 50 bar -2x connections with 3/4" and 1/4" each Compressed air tank Renner: -Tank size Ø 500 x 1.350mm -operating pressure max. 11 bar -content for 250 liters -div. connections *

Condition: excellent (used), mileage: 7,250 km, power: 52 kW (70.70 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,330 mm, first registration: 12/2023, emission class: euro6, color: white, driver cabin: day cab, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, immobilizer system, power assisted steering, sliding door, traction control, = Additional options and equipment = - Automatic dipped beam lights - Passenger bench seat Gjdpfx Aqovfn Smegjuh - Third brake light - Electric windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Cruise control - Height-adjustable steering wheel - LED daytime running lights - Front center armrest - Rain sensor - Side sliding door - Immobilizer - Advertising (applied decals) - Double rear doors - Partition wall - Partition wall without window = Additional information = General information Number of doors: 3 Cab type: single Registration number: VZG-18-J Axle configuration Maximum front axle load: 1,850 kg Maximum rear axle load: 2,100 kg Dimensions Length/height: L4H3 Dimensions (L x W x H): 620 x 207 x 255 cm Weights Curb weight: 2,167 kg Payload: 1,333 kg Gross vehicle weight: 3,500 kg Interior Interior: grey Maintenance APK (general technical inspection): valid until 12/2027 Condition Technical condition: very good Optical condition: very good Number of keys: 2 (2 remote controls)

Condition: used, functionality: fully functional, Wema Probst QF50 Cross-Mill Machine Cross-Mill machine for processing round timber with a swivel table for adjusting the milling angle. Guodpjwc Tdnefx Aqgoh 2 machining stations 1 cross-milling unit 1 drilling unit

Condition: used, Year of construction: 1999, Technical details: Gedpfsy Rmk Rsx Aqgjuh x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm control: Unipro 90 Pallet changer 2x: 400 x 500 workpiece - installed height: 800 mm max. clampable workpiece diameter: 720 - 850 mm spindle taper:: SK 40 spindle turning speed - stepless: 10 - 8000 1/min Spindle power: 20 / 30 kW Spindle Torque: 95/143 Nm tool magazin:: 80 SK 40 total power requirement: 55 kW weight of the machine ca.: 11 t Machine with Unipro 90 control for 5 axis - twin palette changer - tool magazine 80 HSK-A 63 - coolant device with coolant through spindle 7 pressure levels - full A & B-axis - chip conveyor *

Condition: used, mileage: 21,900 km, power: 309 kW (420.12 HP), first registration: 01/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 01/2026, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), * Volvo FM420 6x4 hooklift truck * Meiller RS21.65 body * Steel-air suspension * Tyres 315/70 R22.5 * Twin tyres on the last axle * Lift axle * Trailer coupling * Extendable underrun protection * Euro 6E * Engine displacement 12,777 cm³ * I-Shift gearbox * VEB+ * Short cab with rear window Guedpox Ibbfsfx Aqgjh * Wheelbase 4.30 m * PTO (Power Take-Off) * 1 fuel tank 350 liters * AdBlue tank 68 liters * Additional off-road program * Ecocruise cruise control incl. brake cruise control * Collision warning with emergency braking function * Lane departure warning system * Air conditioning * Electric windows (EFH)

Year of construction: 2019, condition: excellent (used), Four-rope clamshell grab, mechanical clamshell grab, shell grab, ship unloading grab, rope grab, digging grab -Condition: New -Manufacturer: LAUDI GVE, four-rope clamshell grab type VZG ship unloading grab -Max. payload of the gripper: 5600 kg -Height of the closed gripper: 3810 mm -height of the open gripper: 4000 mm -Shell width: 2500 mm -Opening width: 4000 mm -Distance between the locking cables: 522 mm -Spacing of the holding cables: 180 mm -Gripper suspension: Q-Gripper -Bulk density: 0.4-0.8 t/m³ -Transport dimensions: 2480/4180/H2500 mm -Own weight: 4400 kg Guodsw Rnfujpfx Aqgeh