Used Wmw Scfdla13-1 for sale (78,980)

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 40 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 380 mm, oil tank capacity: 300 l, total length: 1,150 mm, total width: 1,750 mm, total height: 3,050 mm, overall weight: 3,200 kg, distance between stands: 800 mm, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Parameters: Maximum pressing force 40 tons. Nodpfxjwbt Uqo Ac Tjcu Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Height 3050mm, Length 1750mm, Width 1150mm. The technical condition of the machine is very good. The machine has been overhauled. It is possible to inspect and check the machine in motion.

Condition: good (used), functionality: fully functional, pressing force: 160 t, stroke length: 500 mm, operating speed: 30 mm/s, reverse speed: 40 mm/s, table width: 850 mm, table height: 780 mm, throat depth: 400 mm, oil tank capacity: 210 l, total length: 3,370 mm, total width: 1,730 mm, total height: 1,480 mm, overall weight: 6,500 kg, installation height: 400 mm, pressing speed: 3 mm/s, Equipment: documentation/manual, Hydraulic horizontal box press PYXWM-160. Manufactured by WMW VEB Dessau - 1978. Njdewndnuepfx Ac Tocu The machine has been overhauled. Ready to work. Max. pressing force 160 tons. Piston stroke 500 mm. Piston speed: Forward 30 mm/sec Pressing 2.5 mm/sec Backward 40 mm/sec Height from base to center of piston 260 mm. Machine frame height 780 mm. Base length from support tool 600 mm. Support tool length 520 mm. Max. clamping width 1730 mm. Working clamping width 400 mm. Support tool height 400 mm. Support tool spacing min-max 240-1100 mm. Dimensions: Length 3370 mm. Width 1730 mm. Height 1480 mm. Frame width 700 mm. Engine power 11 kW. Oil tank capacity 210 liters.

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, pressing force: 160 t, overall weight: 10,500 kg, punching force: 160 t, height adjustment type: electric, Eccentric Press ERFURT PEE(II) 160 for Sale For sale is an Erfurt PEE(II) 160 eccentric press in good condition, ready for immediate use. This is a robust and reliable industrial machine, ideally suited for various pressing, forming, and sheet metal processing tasks. Erfurt machines are renowned for their durable construction, solid design, and dependable performance. Therefore, this model is an excellent choice for metalworking companies, workshops, manufacturing businesses, or fabrication shops seeking a proven and high-performance press. Technical specifications: - Type: Erfurt PEE(II) 160 - Design: Eccentric press - Condition: Good - Operational status: Ready for immediate use This machine impresses with its heavy-duty build and reliable functionality in industrial applications. It is perfectly suited for daily use in production and can be put into operation immediately after purchase. If interested, further information, technical details, and additional photos can be provided upon request. Ncjdpfx Ajyvzzzsc Tsu

Condition: good (used), Machine number: 2082 Type/Model: F315 Control: conventional Travel ranges x-y-z: 820 x 300 x 440 mm Table: 1250 x 335 mm Table clamping area: 1100 x 225 mm Spindle speed range: 56 to 2800 rpm Spindle mount: SK 40 Nsdpfxoh Rawfj Ac Tscu Feed rate: 10 to 630 m/min Rapid traverse: Power connection: 6 kW Accessories/Equipment: Condition: good Weight: 2 t Dimensions: 1700 x 2000 x 1900 mm

Condition: good (used), Year of construction: 1983, Machine number: 316204/22 Type / Model: FSS 315/E Travel ranges x-y-z: 850 – 280 – 355 mm Nsdofli Afepfx Ac Tocu Table: 1,200 x 370 mm Clamping area: 1,060 x 260 mm Speed range: 28 to 1,400 rpm Spindle mount: SK 50 Quill stroke: 80 mm Feeds for x and y axes: 16 to 800 mm/min Feed for z axis: 5 to 250 mm/min Power: 8 kW Accessories/Equipment: Head swivels Condition: good Weight: 4 t Dimensions: 2,000 x 2,000 x 2,400 mm

Condition: ready for operation (used), Hydraulic press PYE 160 S - 2 units available Specifications: Capacity: 160 tons Working pressure: 16 MPa Upward speed: 125 mm/sec Nsdpfozdanzsx Ac Tecu Downward speed: 200 mm/sec Slide stroke: 500 mm Daylight: 360 mm Max. distance between table and slide: 800 mm Ejector capacity on the table: 63 tons Max. extraction depth: 200 mm Voltage: 380 V Total required power: 17 kW Nominal current: 35 A Total weight: 7 tons Hydraulic press ERFURT PYE 100 S - 2 units available Capacity: 100 tons Table dimensions: 750x560 mm Ram dimensions: 530x400 mm Table height above floor: 710 mm Max. shut height: 800 mm Throat: 360 mm Stroke: 500 mm Downward speed: 320 mm/sec Upward speed: 200 mm/sec Connection power: 17 kW Press weight: 5 tons

Condition: used, Type BF 63 Spindle mount: 4MT Spindle diameter: 63 mm Spindle speed: 8–1400 rpm Table size: 900 x 710 mm Ncsdpfx Ajwrpy Rec Tou Drilling travel: 560 mm Table load capacity: 2000 kg Rotary table: 360 degrees

Condition: excellent (used), workpiece diameter 60 mm grinding depth 30 mm clamping length 1000 mm Ncedpfx Aceunt Ege Tsu weight of the machine ca. 0,6 t dimensions of the machine ca. 0,5 x 0,5 x 2,1 m

Condition: used, Year of construction: 1980, Technical details: x-travel: 850 mm y-travel: 280 mm z-travel: 355 mm spindle taper ISO: SK 45 / SK 45 spindle head swivable left - right: je 90° ° range of revolution per miute: 28 - 1400 / 18 step U/min distance table/horizontal spindle: min.: 60 / max.: 180 mm table surface area: 1070 x 270 mm table load: 1000 kg table swivelling +/-: je 45° Grad feed:: X+Y: 16 - 800 und Z: 5 - 250 mm/min total power requirement: 8,0 kW machine weight approx.: 3100 kg dimension machine xH: 2,1 x 1,8 x 2,15 m dimensions electric cabinet: L: 0,8 x B: 0,45 x H: 1,65 m clamping surface area: 315 x 1250 mm Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x Ø 8 mm Ncedpfxsu Ndf Ie Ac Tsu *

Condition: used, Technical details: pressure: 40 t throat: 365 mm distance table/ram: 800 mm Njdpju Nfuqjfx Ac Tecu max. ram stroke: 500 mm ram speed - reverse: 0,45 m/sec ram speed - forward: 0,10 m/sec ram surface area: 450 x 360 x 74 mm table surface area: 630 x 500 x 73 mm passage opening in table: Ø 205 mm table height over floor: 720 mm total power requirement: 13,0 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,7 x 1,1 x 3,0 m Other technical features: -trailing time: 443ms -trailing distance: 9mm -Last machine inspection: May 2020 valid for 1 year *

Condition: used, Technical details: width:: 905 depth: 1200 mm height: 2600 mm weight of the machine ca.: ca. 4,0 / pro Winkel t Two of these clamping brackets are for sale. Material made of steel, surface finished Ncsdsval Nrepfx Ac Tou T-slot according to DIN 650: a=22; h=36; b=39; c=17.5 mm, center distance T-slot to T-slot = 250 mm Foot clamping with 4x slotted hole Ø 21 x 30 mm There are 4 M24 holes each on the side wall (left-right) *

Condition: used, Technical details: floor-plate length: 1345 mm plate width: 845 mm plate height: 28 mm weight of the machine ca.: ca. 260 kg transport dimensions LxWxH: 1500 x 900 mm Steel plate, cast steel, used - with diverse mounting holes M12 Ncedpfx Acou N Dg Ss Teu - with diverse (9x) clearance holes Ø 13mm *

Condition: used, Technical details: floor-plate length: 510 mm Nsdpfxeu N D Dws Ac Tecu plate width: 270 mm Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) *

Condition: used, Technical details: floor-plate length: 205 mm plate width: 195 mm Plate thickness: 65 mm 14 plates available Ncodpfx Aceu N D H Eo Teu T-slots according to DIN 650 for T-slot nuts according to DIN 508 a=13.9; b= 24.2; c= 9.8; h=19.9 mm *

Condition: used, Technical details: width: 700 mm Nodpfxju N Eats Ac Tecu depth: 600 mm height: 910 mm weight of the machine ca.: 440 kg dimension L-W-H: T: 600 x B: 700 x H: 910 mm Steel plate welded, 80mm thick, with stiffener surface finished Clamping surface vertical: 6x T-slot according to DIN 650: a=24mm; h=45mm; b=43mm; c=18mm; distance 140mm Clamping surface foot: L: 600mm x W: 700mm, 7x clamping hole *

Condition: used, Technical details: width: 400 mm Ncodpfou S Hywex Ac Teu depth: 335 mm height: 500 mm weight of the machine ca.: 100 kg T-slot to DIN 650: T-slot width a= 22; h= 39.5; b= 40; c= 17.5 mm, T-slot spacing 125 mm *

Condition: used, Technical details: Length: 1000 mm width: 630 mm height: 40 mm height over floor: 680 mm weight of the machine approx.: ca.250 kg space requirements of the machine approx.: L:1,0xB:0,63xH:0,68 m Measurement and Controlling Plate material made of special cast with steel supplement surface scraped & surface-gauged 3 single column made of cast iron with steel ball inserts and adjustment thread Njdpfxju Nki Te Ac Tocu *

Condition: used, Technical details: faceplate diameter: 620 mm internal diameter: 160 mm dimensions: 620x160x140 mm weight of the machine approx.: ca. 160 kg 4 jaws faceplate flange intake/diameter : passage drill hole 160 mm flange diameter 197mm hole circle 235mm jaws are single guided with chuck key The given info are approx. values! * Ncjdsu Nk Dwspfx Ac Tsu

Condition: used, Technical details: weight max.: 7,0 t Ncedpfxeu Nvm Re Ac Teu Dimensions (LxWxH): 3,4 x 0,12 x 0,51 m The lifting beam is sold without crane hooks. Type: T-beam, welded sheet steel Lifting eye Ø 80 x 130mm Load-bearing eyelets Ø 45 x 3050mm (center stand) As stated without UVV. (Accident Prevention Rules) *

Condition: used, Year of construction: 1989, Technical details: plate width: 1600 mm Nsdpfsyvfy Tsx Ac Tjcu plate thickness: 20 mm smallest sheet thickness: 6 mm Number of Straightening rolls: 11 straightening roll diameter: 180 mm straightening feed: 10 m/min connected load: 76 kW total power requirement: 75 kW weight of the machine ca.: 39,2 t

Condition: used, Technical details: bore capacity in steel (diameter): 13 mm throat: 160 mm bore stroke: 60 mm spindle taper MT: MK2 spindle speed:: 210 - 2580 / 16 step U/min feed: manual mm/U table clamping surface:: 200 x 185 (fest) mm Distance spindle/table max.: 620 mm table clamping surface:: 260 x 265 (verstellbar) Distance spindle/table max.: 160 - 460 mm table rotating: ja ° drill table adjustment: 300 (Handkurbel) mm column diameter: Ø ca. 70 mm total power requirement: 900 Watt weight of the machine ca.: 90 kg dimension machine xH: 0,6 x 0,31 x 1,7 m Ncsdpfx Acjvgbdxe Teu The machine is equipped with a RÖHM 1-13 drill chuck incl. drill chuck key. Spindle run right. Small vice included *

Condition: used, Year of construction: 1970, Technical details: grinding length: 1000 mm grinding width: 315 mm workpiece height: 390/455 mm feed: quer: 0,3-3,5 mm table adjustment: längs 1150 mm table speed: 2,5-25 m/min Table dimensions: 2120 x 600 mm magnetic plate size: 1000 x 315 x 100 mm table surface area: 1160 x 315 mm feed of spindle: 0,002 - 0,05 mm Ncedpfx Aeu Nggzec Teu distance table - spindle center: max. 550 mm throat of the spindle nose: 200-580 mm grinding spindle speed: 1500 / 3000 U/min total power requirement: 10,5 kW weight of the machine ca.: 5,0 t dimension machine xH: 1,3x1,4x1,95 m dimension coolant device LxWxH: 0,7x0,7x0,55 m - coolant device (Tank with pumps) - 2 pieces grinding disc intakes - 4 pieces machine base i.D. *

Condition: used, Technical details: Nodpfovxf Irex Ac Tjcu bore capacity in steel (diameter): 22 mm throat: 205 mm bore stroke: 100 mm spindle taper MT: MK2 spindle speed:: 2 step U/min feed: manuell mm/U Distance spindle/table max.: 150 - 600 mm base plate surface area: 350 x 400 mm table clamping surface:: 360 x 280 mm table rotating: 360 ° drill table adjustment: 450 mit Kurbel mm column diameter: Ø 100 mm control voltage: 380 V total power requirement: 0,8 kW weight of the machine ca.: 270 kg dimension machine xH: 0,6 x 0,5 x 1,95 m column drill incl. machine + vice. *

Condition: used, Technical details: Pressure: 160 t slide stroke: 32...140 mm no. of strokes: 50 Hub/min throat: 400 mm dayligth: 400 mm adjustment of ram slide: 100 mm table-size: 1000x750 o. Aufspannplatten) mm Ncjdou N Dfhspfx Ac Teu ram surface area: 850x630 mm tool shank hole: 400x360 mm total power requirement: 15,5 kW weight of the machine ca.: ca. 10,5 t dimension L-W-H: E-Schrank 1,06x0,6x2,0 mm dimensions L x W x H: L:2,9 x B:1,25 x H:3,3 m - single and /or continuous stroke possible - 80A; Air pressure 6kp/cm²; Oil filling approx.30 Liter - 2 clamping plates (1200x760x90mm and 1200x760x70mm faucet hole dia=300mm) - foot control or manual via hand possible - last check record was 2006 can be demonstrated under power! i.D. *

Condition: used, Technical details: table diameter: 315 mm Ncodpou N Dz Ajfx Ac Tou rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 100 kg dimensions: 620 x 530 x 135 mm The tables were rarely used other features: -with radial scale -surface is finished -center mounting MK3 -dividing circle 19 / 27 / 31 / 41 / 49 / 59 -operation also possible by machine via coupling on both sides (switchable right-/left-hand rotation with automatic changeover) -foot clamping: support size 360 x 420mm with 1 clamping groove on the front side 16 x 200mm *