Used Zerma Pm for sale (1,641)

Condition: excellent (used), functionality: fully functional, Essetre beam processing line model Techno PM with 5 axes Spindle 12 kW liquid-cooled, RPM 1,000–18,000 2 automatic tool changers with 9 positions each HSK 63F Processing height 800 mm Processing width 400 mm Machine is connected and ready for demonstration Bdjdpfsw S Naiox Afwjg

Condition: excellent (used), Side mills Zerma Year of manufacture 2005 Bsdpslvt Eqjfx Afwjdg Type: GSL -18AMIS)

Condition: like new (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 0104, 2 pieces Bjdpfezlladsx Afwjdg Like new.

Condition: excellent (used), Year of construction: 2006, We sell the Mambranpress for kitchen doors, doors, or door frames, etc. Producer ORMA Macchine, Model: PM Air System 25/14 Year 2006. Area 2500 x 1400mm. / 1 Table PIN system for edge binding. Bsdszmnyiepfx Afwsdg Possible to see at work. Documentation included

Condition: good (used), functionality: fully functional, Center height 110 mm Center width 160 mm Spindle bore 23 mm Bsdpjzl Ew Nsfx Afwsdg 3 speeds for clockwise rotation and 3 speeds for anti-clockwise rotation

Condition: used, Year of construction: 2005, operating hours: 160 h, machine/vehicle number: RS000562, Size 36 x 52 cm, CPtronic, Easyplate, Alcolor dampening system, banket wash, impression cylinder wash, segmented ink blades, Baldwin cooling and recirculation system. Bdsdpfsztappjx Afweg

Condition: ready for operation (used), Year of construction: 2017, A Jakü deaeration and CO2 impregnation system is available. Nominal capacity: 10000l/h, water inlet pressure range: 3bar-4.5bar, CO2 inlet pressure range: 8bar-10bar, nozzles: 3, nozzle fineness: medium/fine/very fine. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, empty weight: approx. 800kg, operating weight: approx. 1400kg. Documentation available. An on-site inspection is possible. Bedpfx Afoy H I Hlewjdg

Condition: used, functionality: fully functional, mileage: 30,389 km, power: 129 kW (175.39 HP), first registration: 12/1992, fuel type: diesel, empty load weight: 8,010 kg, overall weight: 12,500 kg, axle configuration: 4x4, fuel: diesel, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 1992, operating hours: 2,466 h, operation weight: 8,010 kg, Equipment: all wheel drive, crane, differential lock, trailer coupling, Fire engine: + Brimont + Model PM - ETR R42A9 + First registration: 08/12/1992 + 30,389 km; 2,466 operating hours + 175 HP diesel engine + 5-speed manual gearbox with reduction gear + Switchable all-wheel drive + Lockable differentials + Twisting (lockable) chassis frame + Selectable front-, rear-, and all-wheel steering, crab steering + Hydraulic winch 4,500 kg + Tow hitch (3,500 kg) + Cabin protection grille + Mechanical rear crane + Spare wheel + Water tank 3,000 l + Portable fire pump (not tested) + Unladen weight: 8,010 kg; gross vehicle weight: 12,500 kg + Fire service vehicle from first owner Receive all newly listed vehicles via email – Subscribe to our NEWSLETTER! Subject to errors and misprints. Sale subject to prior sale! Bdjdpswu Eh Aofx Afwjg

Condition: new, machine/vehicle number: Baureihe GSC / Neumaschine, The compact granulators of the GSC series are fully sound-insulated granulators and therefore operate with particularly low noise levels. The integrated soundproofing, thanks to its sophisticated design, ensures optimal accessibility to the granulator itself as well as for knife and screen changes. The noise reduction is based on the use of state-of-the-art soundproofing materials. Bdsdpfxoyr I E Dj Afwsg The housings, manufactured from a robust steel/welded construction, combined with the V-cut rotors (except for the GSC 300/300), ensure a long service life and offer universal applicability. The tangential housing geometry allows the rotor to reliably feed and granulate even bulky input materials. All machines of the GSC series consistently deliver high-quality regrind, regardless of whether the input material consists of injection or blow molding waste, profiles, sheets, or films. The GSC series models are cost-effective, highly reliable, easy to clean, and built for long service life. Integrated sound insulation: The integrated sound insulation guarantees a comfortable working environment with low noise emissions. The optimized design ensures ideal accessibility to the machine. Mobile compact design: The integrated sound insulation allows the granulators to remain compact and mobile. The machines can be transported to any desired work site using a pallet truck or forklift. ZERMA offers a wide range of options such as extraction systems, conveyor belts, metal detectors, and fine material separators.

Condition: new, machine/vehicle number: GSH, The ZERMA GSH series granulators are exceptionally robust machines designed for the most demanding applications and tailored to the diverse requirements of modern recycling operations. The housings, constructed from heavy-duty steel and welded for maximum strength, withstand even extreme loads. All assemblies related to bearing support, knife mountings, and the rotor shaft are significantly oversized, resulting in outstanding durability. With simple reconfiguration, the machines can effortlessly shred both massive lumps, thick-walled pipes, and also hollow bodies or films. Depending on specific requirements (including for temperature-sensitive materials), various rotor designs are available, all featuring the advanced and superior V-cut technology. All GSH series machines consistently deliver high-quality regrind – whether processing bottle crates, profiles, sheets, films, start-up lumps, or pipes. They are economical, exceedingly reliable, easy to clean, and built for long service life. When combined with ZERMA’s extensive range of options and accessories—such as extraction systems, conveyor belts, metal detectors, fine particle separators, roll-feed devices, etc.—as well as spare parts, the result is a custom-optimized size reduction solution. The advantages include significantly reduced costs, time, and personnel requirements. Thoughtful machine housing design The housing is centrally divided at an angle, and the upper section with feed hopper can be opened hydraulically, providing unrestricted access to the rotor for knife changes and cleaning. The screen insert is also held in place by a hydraulically swiveling screen cradle, ensuring optimal accessibility for quick removal and installation. The screens are reversible. Rugged external bearing arrangement Another well-conceived design feature is the external bearing arrangement. Heavy-duty rolling bearings in steel bearing housings guarantee long service life and are ideal for even the toughest demands. The external bearings prevent grease from entering the cutting chamber, as well as preventing regrind or fine particles from getting into the bearings. This offers a distinct advantage, particularly during wet operation. Flywheel To absorb shock loads during granulation, an optional flywheel is available. For this purpose, the rotors are supplied as standard with a second shaft end. Bodpfx Afsyr Thdswsdg High operational safety All granulators conform to EU machinery directives and carry the CE mark. Accident prevention is ensured, for example, by run-down safety devices with limit switches, as well as hydraulically unlockable non-return valves.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, 1 x Backturning lathe Precision engineering PM 1-FZ Year of manufacture: 1995 In very good condition with a comprehensive range of accessories. Equipment: - Hand lever cross slide with Tripan quick-change system - Electric tailstock for drilling and threading - Collet chuck with draw-in collets - Coolant system Bdodpfoqyfpmsx Afwjg Technical data: - Spindle bore: 23 mm - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Distance between centers: 160 mm - Largest turning diameter over bed: 220 mm Accessories: 39 x draw-in collets 359 E K 23 (1 - 20 mm, 0.5 mm increments) + 5 x square collets 10 x draw-in collets in tailstock 319 E K 12 (1 - 10 mm, 1 mm increments) 1 x Tripan quick-change tool holder with 1 cassette 1 x spindle in tailstock with MK 2 taper 1 x MK 2 drill chuck Röhm 1 - 10 mm 1 x simple clamping tool holder Operating manual (copy) Photos of the accessories will follow. Further accessories, such as collets with intermediate sleeves, are also available in stock. The machine can be inspected while powered on.

Condition: used, Year of construction: 2012, - Work area: X: 9000 mm / Y: 2700 mm - Gantry 1: 5-axis milling spindle 20/26 kW Bjdozuw Ixopfx Afwodg - 32-position tool changer - Gantry 2: 2x13 spindle drilling unit Technical data - Heavy-duty gantry system with 2 gantries - Gantries with drives on both sides (gantry drive) - CNC control SIEMENS 840D sl / PCU 50 with NCU 730 - Operator panel OP 15 with 15" display, mounted on a guide rail along the longitudinal axis Work area / machinable cube size with tool length/diameter of 160 mm - X-axis: 9000 mm with both gantries - Y-axis: 2700 mm - Z-axis: (Standard cube size 420 mm) - Customer-specific design for workpiece thicknesses up to 60 mm - 5-axis head Equipment, Gantry 1 - 1 universal head for 5-axis milling - Milling spindle power: 20/26 kW (S1/S6) - Speed adjustable up to 24,000 rpm - Water-cooled - Tool interface HSK F63 for automatic tool changes - Thread cutting is possible! - 1 chain-type tool magazine with 32 positions - With rotary gripper for fast tool changes - Magazine fixed on the operator side Equipment, Gantry 2 - 2 head mounting brackets - Equipped with 2 heavy-duty multi-spindle drilling units each - With common dust extraction hood - Each drilling unit with 13 drilling spindles (total of 26 drilling spindles) - Individually selectable vertically - Arrangement in an L-shape - 2 angled drilling spindles adjustable from 0 - 25° - 1 right, 1 left, each approx. 2.2 kW, n= 2800 rpm - Drill chuck collet Rego Fix ER 25 M Machine table - Base frame with linear guide - 12 table traverses on a linear guide for positioning in the X-direction, individually driven and positionable via NC drives - Vacuum supply integrated into the table traverse - Each traverse is individually vacuum-monitored and linked to the machine control system Workpiece infeed function - 1 belt conveyor consisting of 4 belt strands - Width 40 mm, each traverse with lifting devices - Lifting device NC-controlled - Stroke 110 mm (+10 mm, -100 mm) - The machine should be installed in a foundation pit of approx. 300 mm - Vacuum pump Bush type: Mink MM 1322 - Suction capacity 250 m³/h - With intermediate tank 500 l for rapid vacuum generation - 2 chip transport belts under the machining area for the removal of chips and/or small swarf up to a size of max. 100 x 100 x 100 mm - Automatic central lubrication Work safety - Moving protective cabin on both gantries - Protective cabin with safety bumpers and safety light curtain system on the operator and rear sides (due to automatic table adjustment)

Condition: used, Year of construction: 2023, controller model: , _____ Description: Year of manuf. : 2023 Control : Technical Data: Speed (stepless):0-3.300 U/min Cageload (max.):8 kg Bdsdpfx Afjyz Hr Nswsg Equipment/Accessory: Partscleaning:Denios Washingtable Further Accessory:Misc. operating materials

Condition: new, machine/vehicle number: ZWS 600 SMART, The ZWS 600 SMART serves as a complement to the ZWS series. The series was designed as an economical solution, specifically for the shredding of wood residues in small and medium-sized woodworking companies. AT A GLANCE: Compact design Sturdy welded steel construction Large-volume hopper for material feed Solid steel rotor with bolted knife holders PLC control for fully automatic operation Technical data SMART 600: Infeed 600 x 840 mm Motor 11 / 15 kW Rotor diameter 250 mm Rotor speed 80 – 120 13 rotor knives Technical data SMART 600 S: Infeed 600 x 840 mm Motor 18.5 / 22 / 30 kW Rotor diameter 250 mm Rotor speed 80 – 120 Bjdpfxoyr I Ifj Afwedg 26 rotor knives

Condition: new, machine/vehicle number: Baureihe GSP, When shredding long pipes and profiles, conventional granulators face significant challenges. In most cases, pits or platforms are required to feed the long and bulky parts. Bjdpfx Afsyr Thkswsdg This is why ZERMA developed the GSP series. Thanks to the nearly horizontal feed hopper, long pieces can be easily fed, and the risk of blockage is eliminated as the machine meters the material automatically. When the grinding chamber is overfilled, no further material is accepted until the machine can operate again without overloading the motor. ZERMA also offers a wide range of options such as extraction systems, conveyor belts, metal detectors, fine material separators, and more.

Condition: new, machine/vehicle number: Baureihe GSE / Neumaschine, Economic granulators: This GSE series is ideal for all injection molding and blow molding operations. It is fundamentally suitable for all thin-walled plastic waste. These granulators stand out not only for their attractive purchase price, but also for their robust, split steel/welded housing, excellent cleaning accessibility, and easy knife and screen replacement. Thanks to the tangential housing geometry, combined with V-cut rotors (except GSE 300/300), even bulky and large-volume input parts are accepted and granulated by the rotor. Bodpfsyr I Eqjx Afwjdg Material transport: As standard, the granulators are equipped with an extraction system and bagging station. Optionally, a collection bin for regrind is available, which, like the extraction trough, is made of stainless steel.

Condition: new, Year of construction: 2026, functionality: fully functional, operation weight: 700 kg, construction height: 1,970 mm, construction width: 900 mm, noise level: 80 dB, number of blades: 3, rotor diameter: 250 mm, rotor width: 450 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, Optimization of an established concept. Shredding of large-volume blow-molded parts as well as start-up and end-piece sections In a compact redesign, the best features of the proven GST and GSC series have been integrated, with special emphasis on weight, handling, and energy efficiency. These compact granulators are equipped with full sound insulation, resulting in extremely quiet operation. The granulators are available with a 250 mm rotor diameter and widths of 300, 450, or 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material blockages. As with all ZERMA granulators, the rotor and stator knives can be adjusted outside of the machine to reduce downtime during maintenance. Bsdot Aagajpfx Afwjdg The strongly tangential, curved rear wall of the cutting chamber combined with the aggressive, open rotor design guarantees reliable material intake and minimizes the risk of blockages. The compact granulators are designed for use in blow molding operations. They are suitable for recycling large-volume parts such as bottles, canisters, and crates. Thanks to the low feed height, the machines can easily be fed by hand or via a small conveyor belt. Low noise emissions and minimal footprint make this granulator the perfect solution for inline size reduction. 98T8Mrx Optional rear wall with elevated stator knife M version: The feed method featuring an elevated stator knife is more suitable for thicker-walled and more compact parts, such as injection-molded components, profiles, and sheets. The cutting geometry and reduced rotor aggressiveness deliver high-quality regrind, regardless of the material type or form, such as injection-molded parts, profiles, or plates. Control system and switch cabinet: The integrated control system and operator console not only comply with all current safety regulations, but can also be customized to address specific requirements. In addition, peripheral devices such as infeed conveyors, metal detectors, and discharge systems can be seamlessly integrated into the machine’s control system. For enhanced efficiency, an optional intelligent energy-saving function is available, which reduces power consumption during idle periods and can start or stop the system automatically based on the operating status of upstream machinery. Standard configuration with blower, power consumption 0.37 kW, and 400-type cyclone Rotor diameter (mm): 250 Rotor width (mm): 450 Drive (kW): 7.5 Number of rotor knives: 3 x 2 Number of stator knives: 2 Screen perforation (mm): > 6 Approx. weight (kg): 700 Feed opening (mm): 380 x 450 Feed opening option, M Version (mm): 295 x 450

Condition: ready for operation (used), Year of construction: 2001, PM 74-2 2001 Year Straight 22 mil impressions Easy plate Alcolor Dampening with Technotrans Grafix Alfatronic 200 powder Gear free of damages Bsdjzb Nxkopfx Afwjdg Tools and Books Brand new rollers

Condition: used, Year of construction: 2012, Hasegawa PM 150 CNC machining center TECHNICAL DATA Spindle Spindle nose: HSK-E32 Speed: 100 - 30`000 rpm Spindle motor: 3.0 / 4.5 kW Tool changer Capacity: 10 Tool - tool change time: 1.8 sec Travel distances X-axis: 150 mm Y-axis: 225 mm Z-axis: 200 mm 4th axis: Lehmann EA-507, 360° OFFER SCOPE Bdedpfx Afeu E El Iowjg U.A: (non-exhaustive list): Hasegawa PM 150 CNC machining center 10-position tool changer Lehmann EA-507 rotary axis transformer Fire extinguishing system Complete operating documentation Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information provided

Condition: ready for operation (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 520-003956, Lisec spacer bender Printer for spacers not available Bodpfx Afjvktytowjdg

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, power: 2.2 kW (2.99 HP), New machine for cleaning beef tripe, never used, three-phase 2.2 kW motor. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Bdodsxz R Edopfx Afwjg

Condition: new, The cost-effective single-shaft shredders of the ZWS series enable the realization of a wide range of size reduction tasks, such as a preliminary stage for subsequent briquetting, the production of wood chips for combustion, or re-introduction into the particleboard industry. Depending on throughput and material, the machines can be customized to meet specific requirements. Bdedpfeyr I Iljx Afwog Typical material for shredding includes: - Large panel and board offcuts - Wooden pallets - Waste from joinery workshops - Packaging wood - Construction and demolition timber - Veneers, MDF, and particleboard

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specifically developed for shredding pipes with diameters of up to 1,300 mm, made from various materials such as PE, PP, and PVC. Bodeyr Tg Hjpfx Afwedg These machines can shred plastic pipes up to 9 meters in length directly, without the need for prior cutting or sawing. The core components are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low rotational speeds. The pipe is loaded into an enclosed feed trough, where a hydraulic pusher presses it against the rotor. The pre-shredded material is then conveyed via a belt to a granulator, which processes it into granulate suitable for immediate use. The entire system is operated automatically via a central control unit. Additional advantages of the system include low energy consumption, the avoidance of power peaks, and reduced risk of accidents during pre-shredding.

Condition: new, GENERAL INFORMATION Bdsdsyr I I Sspfx Afwog The ZIS series single-shaft shredders are characterized by their spacious cutting chambers, which owe their stability to a robust steel-welded construction. The rotor diameter is generously dimensioned at 457 mm. Rotor widths are available in 1200, 1500, and 2000 mm. The ZIS series retains all benefits of the ZSS series: drive via an oversized gearbox, reversible blades, bolted blade holders, durable externally mounted bearings, hydraulic screen cradle, easy handling, and technically advanced control systems. APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies such as IBCs, waste bins, pallets, rain barrels, etc. Additionally, the machine can be universally used for countless applications in the plastics and wood industries. Like all Zerma shredders, machines of the ZIS series can also be equipped with various wear protection options. ADVANTAGES 35% larger cutting chamber volume compared to the ZSS series Internally positioned hydraulic ram Increased ram speed in the return stroke Compact dimensions Blade holders bolted into rotor pockets

Condition: new, The Zerma ZCS shredder combines leading shredder and granulator technology in a single, compact unit. By developing the combination of shredder and granulator, ZERMA has successfully expanded its product portfolio. Through the interplay of the proven design and high torque of the single-shaft shredder with a highly efficient granulator, ZERMA is able to deliver a reliable and compact pre-shredding system. The shredder and granulator are driven separately, providing better process control throughout. To further improve efficiency, the ZERMA Smart Drive System is used to constantly monitor the load and adjust the current accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where consistent quality in shredding and granulating is required. Typical applications include, but are not limited to, the following: Injection molding Thermoforming Blow molding Recycling Extrusion Waste Bsdpfoyr Tg Tjx Afwsdg