Used Zmm Cu 630 for sale (3,811)

Condition: excellent (used), Conventional lathe Lhsdpfx Asy I Dqvjkujg Manufacturer: ZMM Sliven Huvema Inventory no. Model: HU310 x 750 Year of manufacture: 2007 Distance between centers: 750 mm Center height: 155 mm Swing over bed: 310 mm Spindle bore: 32 mm 3-jaw chuck Quick-change tool holder Voltage: 380 V Machine weight approx. 700 kg 3 units in stock!!!

Condition: excellent (used), For sale: ZMM C8C lathe as shown in the photos, marketed under the Huvema brand for the Dutch market. The machine comes from a school workshop where it has been in operation since its production. The condition of the machine is very good. On-site loading of the machine is provided. Turning trials were performed using a VCGT insert with a radius of 0.2. 160 mm Bison chuck with split jaws Turning length: 750 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Lsdpfxoy Rq Utj Akuohg Tailstock taper: MK3 Spindle speeds: 85–2000 RPM 12 spindle speed steps

Condition: good (used), Year of construction: 1973, Centre height: 150 mm Centre distance: 760 mm Max. turning diameter over bed/cross slide: 300/165 mm Spindle bore: 32 mm Lhedpfxsyu R Nke Akusg Spindle mount, short taper per DIN 55027: Size 5 Quill taper of tailstock: MT 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 inch threads: 75 - 2.5 TPI 19 module threads: 0.1 - 1.75 module 19 diametral pitch threads: 70 - 4 DP Electric drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Required space: 1800 x 770 x 1300 mm

Condition: used, Year of construction: 2005, sheet width 3050 mm plate thickness 16 mm distance between columns 3100 mm no. of strokes 16 Hub/min back stop - adjustable 10 - 1000 mm cutting angle 0,5 - 2,5 ° down holder 13 Stück oil volume 300 l total power requirement 22 kW weight 14000 kg dimensions 4100 x 2300 x 2000 mm Features: - Electro-hydraulic slide-guided sheet metal shear - With ELGO P9724 NC digital control unit * Input of target/actual values from the backgauge possible * Digital display - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - Front finger guard - 1x sturdy side stop, with T-slot & mm scale - 3x front support arms - Hydraulic sheet metal hold-down - 2x emergency stop buttons at the front - Rear safety guard (protective grille) - Original operating manual Lhodpfeyzi Nwox Akusg * Special accessories included: - Backgauge system conveyor belt * with pneumatic sheet metal holding device * Conveyor belt with pneumatic scrap diverter * Return to Sender (sheet metal discharge to the operator)

Condition: excellent (used), Professional hydraulic set from the renowned German manufacturer LUKAS Hydraulik GmbH, designed for technical rescue operations and industrial applications. Condition: - Used, fully functional and tested equipment - Shows normal signs of use Lhjdpfx Akeyxr I Doueg - Good technical condition – ready for operation - Visible signs of wear on the housing (do not affect performance) Technical data: - Manufacturer: LUKAS Hydraulik GmbH (Germany) - Set type: hydraulic rescue set - Working pressure: up to 630 BAR - Power supply: 230V (single phase) - Standard: DIN 14751 Included in the set: - LUKAS hydraulic pump - Hydraulic cutter - Hydraulic spreader - Hydraulic hoses - Hose/cable reel - Quick couplings - Transport frame Application: - Road rescue (volunteer/professional fire departments) - Rescue and technical operations - Industrial and demolition work - Cutting and spreading of steel structures Advantages: - Robust German LUKAS quality - Very high operating force (up to 630 BAR) - Complete set – ready for use - Mobile design with hose reel

Condition: new, turning diameter 760 mm turning length 3000 mm swing diameter over bed slide 520 mm centre height 380 mm reus 17 (7,5 - 1015) U/min tail stock MK6 quill stroke 225 mm diameter of quill 105 mm spindle bore 132 mm feed längs 0,039 - mm/min feed quer 0,02 - 9 mm/min total power requirement 15 kW weight of the machine ca. 4700 kg dimensions of the machine ca. 4900 x 1650 x 1650 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders Lsdpfx Akjqv Iw Tjushg - 3-axis digital display DRO Newall - Foot pedal with brake function CE

Condition: good (used), Year of construction: 2014, Manufacturer: DEMAG Load capacity: 860 kg + 630 kg (equipped with two cranes) Ledpfx Akoyu R Dzsuohg Exact technical dimensions are shown in the pictures. The crane runway can be extended using the structures and supports shown in the pictures; however, additional track elements are required for the extension, which are not available!!

Condition: new, neu Bulgarien 55100 € 1041.39 € 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 M 3 20 - 100; 80 - 400; 400 - U/Min 120 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3600 mm 1500 mm 1650 mm 3110 kg In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center main motor with frequency invertor four way rapid traverse device longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock Ledeyq Stpspfx Akushg low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 52 250,00 turning length1.500 mm € 53 290,00 turning length3.000 mm € 59 990,00 turning length4.000 mm € 65 540,00 turning length5.000 mm € 80 860,00

Condition: new, neu Bulgarien 40850 € 780.24 € 400 mm 750 mm Lhodsyq Stispfx Akusg 200 mm 52 mm 235 mm 320 mm 6 6 M 4 18-98; 48-265; 144-790; 3 U/Min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 7.5 kW 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 41.580,-

Condition: new, neu Bulgarien 85520 € 1616.33 € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm 11 140 M 3 7 - 42; 28 - 170; 165 - 1 U/Min Ljdeyq Sn Tspfx Akujhg 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.500 mm € 71 280,00 turning length2.000 mm € 74 190,00 turning length4.000 mm € 91 680,00 turning length5.000 mm € 104 390,00 turning length6.000 mm € 1 230,00

Condition: new, neu Bulgarien 91920 € 1737.29 € 860 mm 3000 mm 430 mm 135 mm 620 mm 560 mm 11 140 M 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4650 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm Lhjdpfx Aoyq Sm Aekueg € 77 680,00 turning length2.000 mm € 80 590,00 turning length4.000 mm € 98 080,00 turning length5.000 mm € 110 890,00 turning length6.000 mm € 124 730,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 75740 € 1431.49 € 600 mm 1500 mm 300 mm 80 mm 400 mm 400 mm 8 90 M 3 20 - 100, 80 - 400, 400 - U/Min max. 8 m/min max. 8 m/min 290 mm 90 mm 5 MK 225 mm 11 kW 3,5 / 22 kW/Nm 1,75 / 11 kW/Nm 120 Nm 1250 daN 1050 daN Fast and simple communication between the operator and the lathe. Simple workpieces are machined in the same way as on the universal lathe, but more efficient. Complicated workpieces are machined in the same way as on the universal lathe, but faster. Complicated workpieces are machined in the same way as on the CNC lathe, but easier. Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven software leads the operator also without programming skills simple and fast to the finished workpiece. The interface is simple and with large icons, which is convenient in a specific work environment. The intuitive menu facilitates the transition to next screens and operations. Well visualized and structured cyclic operations,threads and steps. Possibility to set up the feeds, threads, etc. both mechanically and digitally (via the display). The manual, automatic and combined mode allows more precise operation compared to universal lathe. Easy transition from manual to automatic operation mode. ACCESSORIES: Siemens motor with Siemens Inverter (3 gear steps) CNC control Schneider Magelis Quick change tool post Amestra Multifix Typ C inkl. 4 Halter (3x Rechteck, 1 Rund) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm, max. 2500 r/min Spindle dead center Ball screw spindles for longitudinal and cross axes Coolant equipment Full length rear splash guard Spindle protection Splash guard for the chuck Levelling bols and shims Lhsdowirn Sopfx Akuog Quick release tailstock Machine lamp Operating manual Machine according to "CE“ FURTHER TURNING LENGTHS: 1000 mm € 74 340,00 mm € 77 240,00 mm € 80 240,00 mm € 83 340,00 mm € 86 340,00

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 80 mm, turning diameter: 400 mm, center height: 220 mm, turning length: 1,500 mm, quill stroke: 230 mm, quill diameter: 90 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 240 mm, bed width: 400 mm, Equipment: rotational speed infinitely variable, Production Lathe MEXPOL TUS 400 – Available from Stock The MEXPOL TUS 400 is a high-performance production lathe ideal for precise and efficient machining tasks. With its robust construction, powerful main drive, and comprehensive standard equipment, this machine is perfectly suited for continuous industrial operation. Technical Specifications • Center height: 220 mm • Swing diameter over bed: 400 mm • Swing diameter over cross slide: 240 mm • Distance between centers: 1,500 mm • Bed width: 400 mm • Spindle bore: 80 mm • Spindle mount: DIN 55027 / 8 • Main drive: 11 kW with frequency inverter • Speed range: 25 – 2,000 rpm (3 gear stages) • Maximum spindle torque: 1,200 Nm • Max. workpiece weight: o Between centers: 150 kg o In chuck with tailstock: 600 kg o With steady rest: up to 1,300 kg • Accuracy according to DIN 8606 • Electrical equipment: 400 V / 50 Hz • Noise level: max. 84 dB(A) Feeds and Thread Cutting • Longitudinal feed: 0.04 – 12 mm/rev • Cross feed: 0.02 – 6 mm/rev • Rapid traverse longitudinal / cross: 3,800 / 1,900 mm/min • Metric, imperial, module, and DP threads without change gears Slides • Cross slide travel: 315 mm • Top slide travel: 130 mm Tailstock • Quill diameter: 90 mm • Quill taper: Morse taper MT 5 • Quill stroke: 230 mm Weight • Machine weight: approx. 2,500 kg Standard Equipment (excerpt) • Frequency-controlled main drive • Multifix quick-change tool post, size C • Central lubrication for carriage, headstock, and feed gearbox • Coolant system Lhjdpfxjyhzgqo Akueg • Safety chuck guard with interlock • Travelling chip guard and rear chip wall • CE marking and declaration of conformity • Machine color: RAL 7035 / RAL 7011 Options • FAGOR INNOVA 30iT digital readout

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 36070 € 688.94 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 M 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 Lhedpfx Asxzuu Ajkuog 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 480 - 16 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTH (PRICE ON REQUEST): turning length 750 mm

Condition: new, Year of construction: 2025, neu 2025 010105 prompt, Zwischenverkauf v Bulgarien 47390 € 905.15 € 1 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 M 21 20 - 2000 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 7.5 kW 3600 mm 1250 mm 1400 mm 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS (PRICES ON REQUEST): turning length 1.000 mm turning length 1.500 mm turning length 3.000 mm Ledpfxjwiqz Do Akuohg turning length 4.000 mm turning length 5.000 mm

Condition: excellent (used), RNA 900 mm diameter vibration feeder, component feeder / ct1339a In good condition, for sale with ESR3000 controller. Manufacturer: RNA Type: SRC-N 630-1 L Vibration frequency: 50 Hz / 3000 min - 1 Voltage: 220 V Power: 5.4 Diameter: 900 mm Lhedpfx Ajh Iy Ttokuog A = Output height: 167mm B = Trail width: 50mm D = Bowl diameter: 980mm H = bowl height: 250mm S = Track division: 81mm

Condition: used, Year of construction: 2004, turning length 750 mm turning diameter 310 mm turning diameter over slide rest 175 mm spindle bore 32,0 mm tailstock quill taper MT 3 MK turning speeds 85 - 2200 U/min bed width 200 mm total power requirement 2.2 kW weight of the machine ca. 710 kg range L-W-H 1884 x 717 x 1262 mm New price ~ 23.000 euros from a training workshop (!!) Furnishing: - Spindle speed continuously adjustable in 2x switching stages - "TOS" 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - "NEWALL" digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck Lhodpfx Asxaa D Tskuog - digital speed display - Change gears - Foot/spindle brake * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Spindle bore 32 mm - Turning diameter over cross slide 175 mm - bed width 200 mm - Spindle mount / DIN55027 5 - Spindle taper 4.5 M - Spindle speed infinitely variable in switching stages 2 - Spindle speed stepless 85-405; 470-2200 rpm - Number of feeds 48 - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 710 kg

Condition: ready for operation (used), Year of construction: 2002, turning length 750 mm turning diameter 310 mm turning diameter over slide rest 175 mm spindle bore 32.0 mm tailstock quill taper MT 3 MK turning speeds 85 - 2200 U/min bed width 200 mm spindle taper DIN 55027 GR 5 total power requirement 2.2 kW weight of the machine ca. 710 kg range L-W-H 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college (!!) Lsdpfx Aexab Tpjkujhg - in checked condition - machine videos - ?v=iqU7Bkh6INo ?v=aSViqjk51Ik Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - "NEWALL" digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm. - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg

Condition: new, Siemens 6SL3120-1TE22-4AD0 Single Motor Module 24A SN: T-PN6307737 FS: C ,unused, in sealed original packaging, 100% functional, scope of delivery as per photos Lhedpfexag Ufsx Akuog

Condition: excellent (used), Year of construction: 2000, Dreh-Øüber Bett 320 mm Dreh-Øüber Support 185 mm turning length 1000 mm Lhjdpfxotv Iibs Akujg Spindelbohrungs -Ø/ Aufnahme 32 mm mm spindle turning speed range (12) 85 - 2000 U/min feeds - longitudinal 0,006 - 1,77 mm/min feeds - cross 0,003 - 0,888 mm/min thread - mm pitch 0,1 - 28 mm thread - module 0,1 - 1,75 mm thread - inch 2,5 - 75 inch. voltage 400 V / 50 Hz power capacity 2,2 kW weight of the machine ca. 0.8 t dimensions of the machine ca. 1,8 x 0,8 x 1,4 m Quick-change toolholder with 5 cassettes, fixed steady, 3-jaw chuck Ø 200 mm, coolant device,

Condition: new, Year of construction: 2026, turning diameter over cross slide: 620 mm, turning diameter: 6,000 mm, spindle bore: 103 mm, turning diameter over bed slide: 860 mm, New CNC-controlled machine with flat bed and Siemens Sinumerik 828D BASIC ShopTurn . Delivery date: approx. 4 months after technical and commercial agreement. Working range: - Center height [mm]: 330, 380, 430 - Rotation diameter over bed [mm]: 660, 760, 860 - Rotation diameter over cross slide [mm]: 420, 520, 620 - Center width [mm]: 1500 to 6000 - Bed width [mm]: 560 - Spindle nose DIN 55027/11 - Spindle bore [mm]: 103 - Max. Torque (spindle) [Nm]: 2000 - Speed control: Stepless - Speed stages: mechanical 3 Lodpfxeufgfyj Akujhg - Total speed range [rpm]: 9 - 1320 / 12 - 1250 - Power [kW]: TUB660C: 15 / 18.5 - Feed rates X/Z [mm/min]: 1 - 3000 - Rapid traverse X/Z [mm/min]: 8000 - Quill diameter [mm]: 105 - Inner taper of quill [MK]: 6 - Quill stroke [mm]: 225 - Workpiece weights supported with tailstock [kg]: 1500 Options: - Fixed tailstock - Three- and four-jaw chuck - Face plate - Chuck flange - Hydraulic tailstock quill - Power chuck - Turret head with turret disk - Drill rig with boring bar - And much more

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump • Machine lamp All information subject to change. Lhsdowudhuepfx Akueg A live demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 1986, machine/vehicle number: 23036, Offer 23380 Technical data: - Drilling capacity in steel ST 60 30 mm - Drill spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drill spindle speeds in gear stages 95 - 2000 rpm - Drill spindle stroke 160 mm - throat depth 350 mm - Table with 3 T-slots height-adjustable 340 x 320 mm - Table can be tilted left + right - max. distance table - drill spindle 500 mm - max. distance machined base plate - drilling spindle 1050 mm - Column diameter 160 mm Lhodpfx Aerckw Iekuog - Lighting system - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 107870 € 2038.74 € 800 mm 2000 mm 400 mm 260 mm 560 mm 560 mm 318 M 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6000 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 120-350 mm. Option: hard top jaws with gripping range 120-500 mm 2 pcs. steady rests on supports Dm. 60 - 260 mm with rollers Lhedpjwirghjfx Akuog Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu Lsdpfxewiq E Ae Akuehg ca. 4 Monate ab Auftragse Bulgarien 107970 € 2040.63 € 800 mm 2000 mm 400 mm 3 mm 560 mm 560 mm 318 M 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6100 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 250-380 mm. Option: hard top jaws with gripping range 250-500 mm 2 pcs. steady rests on supports Dm. 120 - 320 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.