Used Zwickroell Ec76G 1-1-2-0 361763 -80°C Bis + 250°C for sale (130,209)

Year of construction: 2016, condition: excellent (used), Indexable insert milling cutter – Face milling cutter Manufacturer: Mitsubishi Type: AHX 640 W 160 C 22 R Multicorner Face milling cutter for high feed rates Bjdpfxofc Tq Ee Ahmeln For 22 heptagonal inserts Cutter diameter: 160 mm

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the stabilized state according to IEC 60068-3-5, depending on the test chamber temperature ± 1 K over time Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the support grid Water level = 0 mm The water level is at the top edge of the support grid Data for spray device, standard Bljdpfx Aezh D S Rohmsn Number of spray nozzles 6 Spray volume per nozzle 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles 6 Spray volume per nozzle 4.5 l/min Additional flooding nozzles 2 Spray volume additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, on-site Weight approx. 890 kg net For your safety as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Art. No.: Pum 32 Bjdpfxszxgvto Ahmjln Manufacturer: KSB Type: ETANORM MX 80-250 MX 1 Item condition: good, used, functional guarantee Pump originates from a fire extinguishing system Available: immediately Flow rate: 2,800 l/min Head: 60.5 m Revolutions: 2,960 rpm Pump impeller: bronze Motor Manufacturer: Siemens/KSB Power: 45 kW Voltage: 3 x 400 Volts Revolutions: 2,960

Condition: used, Mitsubishi Electric MR-S12-100B-E01 Version C Servo Drive / Controller For sale is a used Mitsubishi MR-S12-100B-E01 Version C servo drive / servo controller. The unit was removed from a working machine and shows normal signs of use. Ideal as a spare part for CNC machines, automation systems, and industrial production equipment. Technical Data Manufacturer: Mitsubishi Electric Model: MR-S12-100B-E01 Version: C Type: Servo Drive / Servo Amplifier Made in Japan Condition: Used Removed from a working machine Cosmetic condition: see pictures Scope of delivery as shown in the photos Notes Bledoy Ubbxopfx Ahmon 7-day functional warranty

Condition: used, TECHNICAL DETAILS - Belt width : 80 [mm] - Max. loading height : 50 [mm] Bljdpfx Aow H Dvpshmsn - Max. temperature : 1150 [°C] - Adjustable belt speed : 5 - 100 [cm/min] - Max. belt load : 3 [kg/m] à 800 [°C] / 1.2 [kg/m] à 1100 [°C] - Heating length : 1000 [mm] - Cooling length : 1800 [mm] - Shielding gas : Nitrogen / Dihydrogen - Shielding gas flow : 2 [Nm3/h] - Purge gas : Azote - Purge flow rate : 1.8 [Nm3/h] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11.5 [kW]

Condition: ready for operation (used), Indramat MAC112B-1-PD-2-C/130-B-0/S005 Permanent magnet motor SN:MAC112-82766 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Bledpfx Asvabhdshmen

Condition: excellent (used), Vötsch Type: VC³ 0100 Vötsch Climate Test Chamber, Air-Cooled Internal Test Chamber Dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Overall Device Dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Test Chamber Volume: 990 litres Temperature Testing: Minimum Temperature: -0°C Maximum Temperature: +90°C Temperature Change Rate, Cooling: 0.2 K/min Temperature Change Rate, Heating: 0.5 K/min Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Uniformity: ±0.5 to ±1.0 K Heat Compensation at +20 °C: 350 W Climatic Testing: Minimum Temperature: +10°C Maximum Temperature: +90°C Dew Point Temperature Range: +4°C to +89.5°C Humidity Range: 10 to 98% r.h. Temporal Humidity Deviation: ±1 to ±3% r.h. Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Uniformity: ±0.5 to ±1.0 K Voltage: 1/N/PE AC 230V ±10% 50Hz Rated Power: 2.3 kW Rated Current: 10 A Refrigerant: R-404A Weight: approx. 1400 kg Bedpfxsziypuo Ahmeln Important information for you as a buyer: The following measures are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: ready for operation (used), Indramat MAC093A-0-LS-2-C/110-A-1// Permanent three-phase servo motor SN:7846, used, normal signs of use, 100% functional, scope of delivery as per photos Bodpfjvy N S Dex Ahmoln

Condition: excellent (used), Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system -Cutting nozzles: Flame cutting nozzles 56 pieces unused Ovp -Type/Quantity: see photos/parts list -Cutting range: 2 - 250 mm Bjdpfx Ajw Udkuohmjln -Price/Delivery: complete -Transport dimensions: 200/150/H50 mm -Weight: 0.8 kg

Condition: new, For sale: Professional industrial pump from the renowned manufacturer KSB. The pump is in new condition (ex-stock/warehouse storage) – unused, with possible storage marks visible in the photos. Bjdpfx Ahoywcq Tomoln ⚠️ Sale concerns the pump only – electric motor not included. ⚙️ TECHNICAL DATA Manufacturer: KSB Model: ETACHROM BC 80-250 / 1104 Year of manufacture: 2000 Capacity: up to approx. 160 m³/h Head: approx. H-14 Type: centrifugal pump Construction: single-stage Connections: flanged Design: industrial, heavy-duty 🔧 APPLICATIONS Water installations Industry Process systems Cooling Liquid circuits ✅ CONDITION New – stock item Unused Fully operational construction No motor included 📦 ADDITIONAL INFORMATION ➡️ Option to purchase an electric motor ➡️ Matching motor available – additional cost: €700

Condition: good (used), Year of construction: 2000, Arburg 420 C 1000-250 (2000) Clamping force : 100 t Screw diameter : 30 mm Distance between tie bars : 420 x 420 Shot weight : 100 g Max mold hight : 200 m Max opening : 730 g Blsdjxqcrzopfx Ahmen Hydraulic cores : 0 \+ robot TECHNOMATIC

Condition: used, machine/vehicle number: MAC112-76348, overall weight: 50 kg, Rexroth Indramat Bodex H I Tfspfx Ahmsln MAC112C-1-KD-2-C/130-A-1/S005 Servo motor / permanent magnet motor

Year of construction: 1997, condition: ready for operation (used), A transfer press line is offered, consisting of a Gräbener double-column transfer press including a feed unit and a Fecker decoiler-straightener combination with strip feed. 1) Gräbener GSET 2-250-280-315 double-column transfer press, year of manufacture: 1997, condition: operational, nominal force: 2500kN, nominal force stroke: 5mm, nominal energy capacity: 45kJ, slide stroke: 315mm, max. stroke rate: 50strokes/min, slide adjustment: 125mm, number of connecting rods: 2, shut height between bolster and slide: 800mm, bolster dimensions X/Y/Z: 2800mm/1150mm/200mm, slide area X/Y: 2800mm/900mm, max. die cushion stroke: 160mm, die cushion force: 88kN, machine dimensions X/Y/Z: approx. 5200mm/2700mm/5450mm, dimensions including sound enclosure X/Y/Z: approx. 7200mm/4700mm/5610mm, weight: approx. 55000kg. 2) Feed unit, condition: partially operational. 3) Fecker decoiler-straightener combination with strip feed, max. load capacity: 3000kg, max. coil outside diameter: approx. 1500mm, strip pass line height: approx. 1240mm, overall height: approx. 2740mm, width of the decoiler section: approx. 1680mm, length of the strip transfer table: approx. 3500mm. Documentation available. Inspection possible by arrangement. Bodpfjzrhhqox Ahmeln

Condition: ready for operation (used), Indramat MAC115A-0-FS-2-C / 180-B-1 / S001 Permanent Magnet Motor, serial number: MAC115-04930, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Blodpfei D Irhox Ahmjn

Year of construction: 1991, condition: excellent (used), functionality: fully functional, overall weight: 520 kg, Pump was operated on a test bench and has only run for very few operating hours. Flow rate: 400 m³/h ( 111 liters / second ) Delivery head / delivery pressure: 19 meters / 1.9 bar Pump speed: 1450 1/min NPSH required: 3.83 m Efficiency: 85.7% Shaft power: 24.04 kW Impeller diameter: reduced 264.5 mm (maximum Ø 269 mm) Shaft seal: single mechanical seal Manufacturer: Burgmann Impeller type: closed radial impeller Bearing type: roller bearing Lubrication type: Grease Materials of construction Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Bodperfdttjfx Ahmeln Shaft: 1.4462 Impeller: 1.4408 (AISI 316) Bearing bracket: Cast iron EN-GJL-250 Shaft sleeve: CrNiMo steel Nominal size of suction nozzle: DN 200 Discharge connection Nominal diameter: DN 150 Nominal pressure suction PN 16 Nominal pressure pressure PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM Type: KPER 200 L4 Efficiency class: IE 0 Motor speed: 1435 1/min Frequency: 50 Hz Rated voltage: 380 / 660 V Rated motor power: P2: 30 kW Thermal class: F Motor protection class: IP54 Cosphi: 0.82 Dimensions: Length: 1600 mm Width: 650 mm Height: 820 mm Weight: 520 kg

Year of construction: 2014, condition: excellent (used), Vötsch VCS³ 7034-5 Climate Testing Chamber / Temperature and Humidity Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Machine Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Test Chamber Volume: approx. 335 liters For sale is a used Vötsch VCS³ 7034-5 climate testing chamber with temperature and humidity control, programmable touch panel control, and water-cooled design. Bsdsz Akcfjpfx Ahmoln The system is suitable for professional temperature and climate testing, humidity testing, environmental simulations, material testing, electronics and component testing, as well as for research, development, and quality assurance. Technical Data: Manufacturer: Vötsch Industrietechnik GmbH Temperature Range: -70 °C to +180 °C Humidity Control: included Water-cooled design Test Chamber Volume: approx. 335 liters Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 9 kW Rated Current: 20 A Refrigerant 1: R404A, 2.50 kg Refrigerant 2: R23, 0.75 kg Equipment: Programmable touch panel control Temperature control Humidity control Water-cooled design Stainless steel interior Large viewing window Test chamber lighting Separate digital temperature and humidity display Several stainless steel inserts in the test chamber Program mode and manual mode Test specimen port Ø 125 mm Additional test specimen port Ø 50 mm Front main switch Electrical connection with approx. 3.5 m connection cable Connection for condensate drain / overflow Cooling water connection Connection for demineralized water Compressed air connection Dimensions: External Dimensions (W × D × H): approx. 872 × 1,758 × 1,800 mm Internal Dimensions (W × D × H): approx. 580 × 765 × 750 mm Weight: approx. 585 kg Transport Data: Dimensions (W × D × H): approx. 872 × 1,758 × 1,800 mm Transport Weight: approx. 585 kg Condition: Used Optical condition as shown in the pictures. Scope of Delivery: Vötsch VCS³ 7034-5 climate testing chamber Programmable touch panel Stainless steel inserts as shown in the pictures Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), Year of construction: 2012, DEMAG crane chain hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with crane canopy (2x3m) The DCM-Pro manulift was developed for safe and fast load handling with one-hand operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Due to the control unit being rigidly connected to the load handling attachment, the operator only needs one hand to operate the chain hoist as well as to guide the load. Manufacturer: DEMAG Type: Crane chain hoist Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Bjdpfx Ahjhwd E Nomoln Load capacity: 80 kg Control: GSA Type 4 Movement radius: sideways 3 metres and forwards/backwards 2 metres Steel beam: included in the offer Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2002, overall weight: 3,200 kg, Krauss Maffei 80-220 C1 injection molding machine 80 tons Bodpfez Dquzsx Ahmeln Year 2002

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 permanent magnet synchronous motor, serial number: 68352, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional. Scope of supply as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire about the costs for packaging and shipping separately! Bedpfoi D Ii Isx Ahmsln

Condition: ready for operation (used), Mitsubishi Electric MELFA RV-13FM-D1-S15 industrial robot SN: FK612018R, used, in good condition, fully functional, supplied as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! The following components are also available in our shop: Controller "Mitsubishi Electric MECHA CR750-07VLD1-1-S15" / Connection cable "Mitsubishi Electric BKO-FA0741H07-D" / Connection cable "Mitsubishi Electric BKO-FA0739H07-D" Bljdpfex Dw Nujx Ahmsn

Condition: ready for operation (used), Indramat MAC 112B-0-LD-2-C/130-A-0 / S001 servo motor, serial number: 48736, used, shows significant signs of wear, 100% functional, scope of delivery as shown in the photos. Bledoy U Ef Uopfx Ahmen

Condition: used, Year of construction: 1995, functionality: fully functional, Hämmerle / HRC Dividing Straightening Machine 80.1250 | 1,250 mm | 19 Rolls | ARKU Overhaul 2020 For sale is our Hämmerle / HRC dividing straightening machine 80.1250, manufactured in 1995. According to the available documentation, the machine was overhauled by ARKU in 2020 and is suitable for straightening laser-cut, flame-cut, and stamped parts. Technical data according to machine documentation: Maximum material width: 1,250 mm Specified material thickness range: 0.8–20 mm 19 straightening rolls with 80 mm diameter Straightening speed: 2–20 m/min Bljdpfxez Eabyj Ahmon Infeed table with recessed ball rollers Driven discharge roller conveyor, approx. 2 m Year of manufacture: 1995 The actual material cross-section that can be straightened depends, among other things, on the material, material width, and part geometry. We would be happy to discuss your specific application using concrete parts as examples. Price: €140,000 net, negotiable, ex works Leopoldshöhe. The machine is available for immediate delivery. Inspection by appointment; dismantling, loading, and transport are not included in the price. We will provide documentation on the overhaul to interested parties, if available. Please include information on the material, sheet thickness, and part size with your inquiry.

Condition: used, Year of construction: 2000, grinding diameter 500 mm Bljdoxzk Niepfx Ahmon grinding length 1000 mm centre height 250 mm -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: used, Year of construction: 2007, 3 x Frech die-casting machines Blodpfx Ahjz Hkg Aomon DAW 80F RC, year of manufacture 2003, DAW 125 S DV, year of manufacture 1999, DAW 125 F, year of manufacture 2007.

Condition: good (used), Year of construction: 1996, Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor, Permanent Magnet Main Drive Motor, DC Motor, Asynchronous Main Drive Motor, Spindle Motor -Manufacturer: Indramat, servo motor from cycle lathe DMT CD320 -Type: MACO71C-0-US-2-C/095-A-/S001 -Part No.: 228353 -Speed: 2000 rpm -Shaft: Ø 19 x 37 mm -Dimensions: 390/115/H170 mm -Weight: 11.9 kg Blodpfx Aspb Eawohmsn