Used Alcera 100 M for sale (81,881)

Condition: new, Diameter: 12 mm Weight per meter: 0.73 kg/m MBK (Minimum Breaking Force): 152.7 kN Construction: 6 x K25F IWRC Number of wires in outer strands: 150 Strength class: 1960 Standard: EN 12385-4 Material: Steel, steel core IWRC Strand direction: right or left Ends / Fixed length: Loop crimped / Point Length: 100 m Kdjdpfx Agj Ab Iq Is Aeu

Condition: new, Diameter: 11 mm Weight per meter: 0.63 kg/m Kedpfx Age Ab Ipqe Aedu MBK (Minimum Breaking Force): 133.2 kN Construction: 6 x K25F IWRC Number of wires in outer strands: 150 Strength class: 1960 Standard: EN 12385-4 Material: Steel, steel core IWRC Strand direction: right or left Ends / Fixed length: Loop crimped / Tapered Length: 100 m

Condition: new, Diameter: 13 mm Weight per meter: 0.84 kg/m MBK (Minimum Breaking Force): 180.0 kN Kjdpfx Ags Ab Iuaj Aodu Construction: 6 x K25F IWRC Number of wires in outer strands: 150 Strength class: 1960 Standard: EN 12385-4 Material: Steel, steel core IWRC Direction of lay: right or left Ends/Fixed length: loop crimped / pointed Length: 100 m

Condition: used, Feutron Type: 3702/06 Water-cooled climate testing chamber Technical data: Test chamber nominal volume: 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Door: double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing window: heated, 2 pieces, width: 500 mm, height: 600 mm Feedthrough opening: 1 piece, left side wall, diameter: 75 mm Temperature range: -40...100°C Climate range: 10...95°C Kedpfx Aszd Sdmog Ajdu Temperature difference, over time: ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling: up to 2.0 K/min on average Heating: up to 2.0 K/min on average Humidity range: 10...95 % r.h. Humidity difference, over time: ≤ ± 3.0 % r.h. Dew point range, intermittently: -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and drying refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/, 50Hz Power plug: CEE 5-pole, 32 A, with 5.0 m cable Max. simultaneous power consumption: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 2460108, power: 1.5 kW (2.04 HP), load capacity: 200 kg, lifting height: 7,850 mm, platform length: 1,110 mm, platform width: 930 mm, overall weight: 2,650 kg, tire size: 0,41 x 0,13 m, color: red, transport length: 2,800 mm, transport width: 990 mm, transport height: 1,990 mm, Equipment: UVV, Technical specifications Year of manufacture: 2016 Motor: Electric (2 x 1.5 kW) Working height: 9.85 m Platform height: 7.85 m Max. lateral outreach: 3.15 m Basket capacity: 200 kg Upper carriage rotation: 350° Platform dimensions (L x W): 1.11 m x 0.93 m Ksdpfx Aezmfm Hjg Aodu Overall dimensions (L x W x H): 2.80 m x 0.99 m x 1.99 m Boom length: 1.50 m Weight: 2,650 kg Climbing ability: 25% Travel speed: 0.65 km/h - 5 km/h Fully operational, general signs of use

Condition: new, Diameter: 10 mm Weight per meter: 0.53 kg/m MBK (Minimum Breaking Force): 97.0 kN Construction: 6 x K25F IWRC Number of wires in outer strands: 150 Kdedpfx Ago Ab Inao Aeu Strength class: 1960 Standard: EN 12385-4 Material: Steel, steel core IWRC Strand direction: right or left Ends / Fixed length: Loop crimped / Point Length: 100 m

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: electric, For sale: lightly used sheet metal rewinding machine SVM-100, designed for automatic rewinding of sheet metal from large coil rolls into smaller rolls of 25m2 (1250*20,000 mm). The machine was manufactured in 2024, has been used very little, is in excellent technical and visual condition, and is fully ready for operation. It is an excellent solution for companies that produce roofing materials or other sheet metal products supplied in rolls. The machine automatically: - Unwinds the sheet metal from the coil up to 1 ton. If you want to rewind from 2-5 ton coils, an automatic unwinding unit is required to feed the sheet metal. - Winds the sheet metal into a roll. - Cuts the sheet to a specified length. - Allows the roll to be wrapped with stretch film. - Applies protective film to the surface of the sheet metal. The machine is connected – it can be inspected and tested. Technical specifications: Manufacturer: Foldsolutions / UAB Pakservisas Model: SVM-100 Year of manufacture: 2024 Made in: Lithuania Operating parameters: Sheet metal width: 1230–1260 mm Sheet metal thickness: 0.4–0.6 mm Maximum roll length: 20 m Roll diameter: approx. 300 mm Equipment: Automatic sheet metal winding Sheet metal cutting to a specified length Automatic roll packing process with stretch film Kdodjzibwgspfx Ag Aou Option to use protective film on the sheet metal Integrated length measuring encoder Touchscreen control panel Manual and automatic operating modes Pneumatic cutting system Adjustable operating speeds Length calibration function for precise production Emergency stop system Technical data: Electrical power: 400 V / 50 Hz / 3 phases Power: 2.6 kW Required compressed air pressure: 0.65 MPa Air consumption: 0.3 m³/min Dimensions (L × W × H): 2555 × 1730 × 1800 mm Weight: approx. 600 kg Application: Ideally suited for roofing materials, facade, sheet metal products, sheet metal processing companies, and other manufacturers who require fast, accurate, and safe preparation of sheet metal rolls for transport or storage. If you have any further questions, we will be happy to answer them.

Condition: new, Diameter: 10.5 mm Core diameter: 8 mm Weight per meter: 72 g/m MBK (minimum breaking strength): 90 kN Material: UHMWPE / Dyneema® Construction: core-sheath rope Ends / Delivery: including end terminations Kjdpfo Ab S E Nox Ag Aodu Length: 100 m

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 100 x 100 x 5400 mm Total length:3100mm Total hight:75mm V-size: 10 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Ksdpfx Agszc Iypo Asdu

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete Kdodpfez Slltjx Ag Asu • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: used, Year of construction: 2005, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.000 mm Control 840 D Siemens turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A63 swivellable B: -30 / +180 ° swivle time 1,2 s numbers of pallets 2 size of pallet 1.000 x 800 mm max. workpiece weight 1.500 kg rotatable C: 360 ° number of toolpositions 180 pos. tool taper HSK-A63 total power requirement 78 kVA Ksdpfxswf Rgfs Ag Aodu weight of the machine ca. 27,0 t dimensions of the machine ca. 8,0 x 7,0 x 3,4 m 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rotary (C-Axis) - pallet changer - 180-pos. tool-changer - WITHOUT zero point clamping system - WITHOUT RINGLER exhaust - WITHOUT tools

Condition: used, Year of construction: 2015, functionality: fully functional, For sale: a professional electric CNC bending press, AMADA HFE M2 100-3. Ksdpfx Agozrwc Dj Aodu Operates very quietly due to its electric drive. The machine is in full working order and has been regularly serviced by Amada. It can be inspected and tested. The machine is sold without tooling. We can offer new tooling based on your requirements. Key information: Manufacturer: AMADA Model: HFE M2 100-3 Date of manufacture: 2015.06 Bending force: 100 T (1000 kN) Working length: 3000 mm Maximum bending length: 3340 mm Technical parameters: Distance between columns: 2705 mm Stroke: 200 mm Depth (to side frame): 420 mm Approach speed: 100 mm/s Working speed: 10 mm/s Return speed: 100 mm/s Power consumption: 10.5 kW Machine dimensions: Length: 4385 mm Width: 2430 mm Height: 2680 mm Weight: 6700 kg Equipment and accessories: Controller: Amada touch screen Upper tool clamping: Amada manual clamping Back gauge: X, R automatic. Z1, Z2, Z3, Z4 mechanical. Laser protection: CE – AKAS automatic laser If you have any further questions, we will be happy to answer them.

Year of construction: 2006, condition: excellent (used), functionality: fully functional, HOSOKAWA ALPINE 100 AS AEROPLEX SPIRAL JET MILL WITH K-TRON GRAVIMETRIC FEEDING SYSTEM For sale: complete Hosokawa Alpine Aeroplex 100 AS spiral jet mill system with K-Tron gravimetric dosing/feeding unit. The system originates from pharmaceutical use and was originally supplied to Mepha AG, Switzerland. The machine is in very good, clean condition and is supplied with extensive original documentation for both the Hosokawa Alpine jet mill and the K-Tron feeding system. HOSOKAWA ALPINE 100 AS Manufacturer: Hosokawa Alpine AG, Germany Type: Aeroplex 100 AS Machine No.: P2 150 959/1 Year of manufacture: 2006 Grinding chamber diameter: 100 mm Weight of jet mill: approx. 12 kg CONFIGURATION OF THE JET MILL Nozzle ring: - Nozzle angle: 50° - Number of nozzles: 4 - Nozzle diameter: 1.5 mm Injector: - Injector drive nozzle: Ø 1.5 mm - Catch nozzle: Ø 3.5 mm Compressed-air connections: - Grinding air: 10 bar(g) - Injector air: 10 bar(g) - Permissible operating pressure: +/- 50 mbar Connections: - Product feed: 2" Kdedpfjzxt Snex Ag Aju - Grinding air: 1/2" - Injector air: 1/2" - Fine product outlet: 1 1/2" According to the original order-specific documentation, the machine is equipped with white, FDA-approved silicone seals. K-TRON GRAVIMETRIC FEEDING/DOSING SYSTEM The Alpine mill is combined with a K-Tron dosing system for controlled and reproducible product feeding. The system includes: - K-Tron gravimetric feeder - K-Tron KCM control unit - K-Tron Digi-Drive - Stainless steel product hopper - Weighing/measuring system - Dosing drive - Several interchangeable dosing screws for different feeding ranges - Stainless steel product feed components The K-Tron weighing system is identified as: Type: SFS 24/20 (+20KG VL) w.D. Capacity: 240 N Article No.: Serial No.: 10711664 Country of origin: Switzerland APPLICATION The Hosokawa Alpine Aeroplex 100 AS is a spiral jet mill designed for fine grinding and micronization. The grinding process takes place using compressed air, without rotating grinding tools inside the grinding chamber. Typical applications include: - Pharmaceutical powders and active ingredients - Fine chemicals - Laboratory and pilot-scale production - Micronization - Fine grinding of dry powders - Development and small production batches DOCUMENTATION Extensive original documentation is included. Available documentation includes, among others: - Original Hosokawa Alpine 100 AS operating manual - Order-specific machine data - Technical drawings - Operating and maintenance instructions - Cleaning instructions - Spare parts information - K-Tron feeder operating documentation - K-Tron technical drawings and configuration data CONDITION Very good and clean used condition from pharmaceutical use. The system was dismantled for cleaning and has been carefully reassembled. The photographs show the actual machine and its current configuration. Inspection and demonstration by appointment in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged. Subject to prior sale and errors.

Condition: new, Diameter: 8 mm Weight per meter: 0.38 kg/m MBK (Minimum Breaking Force): 70.7 kN Kedpfx Ago Ab Ilxo Aodu Construction: 6x25 cross-laid (IWRC) Number of wires in outer strands: 150 Strength class: 1960 DIN 3058 Material: Steel, steel core IWRC Strand direction: right or left Ends/Fixed length: Loop crimped / Tapered Length: 100 m

Condition: new, Diameter: 10 mm Weight per meter: 0.45 kg/m Kodpfs Ab Icwsx Ag Asdu MBK (Minimum Breaking Force): 97 kN Construction: SC Number of wires in outer strands: 114 Strength class: 1960 DIN 3058 Material: Steel, IWRC steel core Strand direction: right or left Ends/Fixed length: Loop, crimped / Pointed Length: 100 m

Condition: new, Diameter: 9 mm Weight per meter: 0.46 kg/m MBK (Minimum Breaking Force): 82.3 kN Construction: 6x25 cross-lay (IWRC) Number of wires in outer strands: 152 Strength class: 1960 DIN 3058 Material: Steel, steel core IWRC Kodpfx Ags Ab Ikhs Ajdu Lay direction: right or left Ends / Fixed length: Loop crimped / Point Length: 100 m

Condition: good (used), Year of construction: 2011, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, injection pressure: 1,600 bar, total length: 4,000 mm, total width: 1,300 mm, total height: 1,900 mm, overall weight: 4,400 kg, warehouse no.: 503730 manufacturer: ENGEL type: e-max 310-100 controller: LC 200 A01 year of construction: 2011 clamping force: 1000 kN distance between tie-bars h x v: 460 x 410 mm size of mould plates h x v: 650 x 600 mm min. mould height: 150 mm max. mould height: 450 mm max. open daylight: 800 mm opening stroke: 350 mm screw diameter: 35 mm swept volume: 135 ccm injection pressure: 1600 bar equipment included incl. Spruepicker Kdjdjz Eabtepfx Ag Aeu screen text german core pulling hydraulically 1x Anti vibration mounts mould heating 8x handling type: Angussentnahmegerät manufacture: ENGEL controller: ER-USP 5 year of construction: 2011 measures of machine l x w x h: 4m x 1.3m x 1.9m total weight: 4400KG

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 8600 € 165.98 € 100 to horizontal verschiebbar 900 mm 1050 mm 1900 mm 1000 mm 2250 (PSS: 2400) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Kdsdeypbwuspfx Ag Aju Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 100 M TL: 1 speed 4 mm/s, single-hand control with lever € 8.600,00 PSS 100 M L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 9.300,00 PSS 100 M NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 9.900,00 PSS 100 M: same as PSS 70 M NC but with stroke 500 mm € 11.400,00

Condition: used, Year of construction: 2021, CNC MACHINING CENTER Morbidelli N100 KEY FEATURES "BUMPERS": THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS AXES Morbidelli N100 12 Morbidelli N100 15 Morbidelli N100 18 Morbidelli N100 22 Working area in X-Y-Z axis * mm 2486-1255-150 3686 TECHNICAL DATA -1555-150 3686-1860-150 22-31 = 30862185-150 22-43 = 42862185-150 Travel X-Y-Z axes mm 3120-1685-250 4320-1985-250 4320-2285-250 22-31 = 37702585-250 22-43 = 49702585-250 Traverse speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area No. 4 Vacuum pump (Opt.) m³/h 250/300 DRILLING UNIT Vertical spindles No. – RPM 7 (4X-3Y) 8000 – 12 (8X-4Y) 8000 Horizontal spindles (Opt.) No. – RPM 4 (2X-2Y) 8000 – 6 (4X-2Y) 8000 Integrated saw blade in X (Opt.) Ø mm – RPM 125 – 10000 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed RPM 24000 Lateral tool changer 8 positions 10 positions 11 positions 13 positions INSTALLATION Installed power kVA 23÷28.5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/s 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 1950 2200 2500 22-31 = 2550 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage only electrospindle or electrospindle + drilling unit: diameter 200 mm; Extraction air requirement 3,400 m³/h In conjunction with the strip for panel ejection, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC machining center for processing panel materials. Self-supporting structure and work table Box construction made of cold-rolled steel, consisting of rectangular sections welded together; multifunctional work table made of aluminum with a single working area. Holes in a grid of 120 mm for vacuum connection, easily removable via a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be machined. Moving gantry It is a gantry structure made of cold-rolled steel in a box construction, consisting of rectangular sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a quick-change tool system of type HSK63F. Travel of the gantry and aggregate carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides by means of pre-tensioned ball screws. The movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive. The movement of the aggregate carrier in the Z direction takes place via pre-tensioned ball screws. Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servo motors and digital control units. CONTROL The control unit consists of a numerical control. Kdodpfez Iyvpox Ag Asu

Condition: new, Diameter: 14 mm Weight per meter: 0.94 kg/m MBK (Minimum Breaking Force): 211.0 kN Construction: SUPERFILL® compacted Strength class: 1960 Standard: EN 12385-4 Kdsdo Ab Nmqopfx Ag Aeu Material: Steel, steel core IWRC Strand direction: right or left Ends / Fixed length: Loop crimped / Tapered Length: 100 m

Condition: new, Diameter: 13 mm Weight per meter: 0.89 kg/m MBK (Minimum Breaking Force): 185.0 kN Construction: 6 x K26WS IWRC Number of wires in outer strands: 162 Strength class: 1960 Standard: EN 12385-4 Material: Steel, steel core IWRC Strand direction: right or left Ends / Fixed length: Loop crimped / Pointed Kodpfx Age Ab Nn Is Aodu Length: 100 m

Condition: new, Diameter: 16 mm Weight per meter: 144 g/m MBK (Minimum Breaking Strength): 220 kN Material: UHMPE / Dyneema® Construction: 12-strand braided Design: without protective cover Ends / Delivery: incl. end splice (loop) Length: 100 m Kdedpfx Ago Ab Tble Aju

Condition: new, Diameter: 14 mm Weight per meter: 107 g/m Kdedpe Ab Tahofx Ag Aou MBK (Minimum Breaking Force): 160 kN Material: UHMPE / Dyneema® Construction: 12-strand braided Design: without protective sheath Ends / Delivery: incl. end splice (loop) Length: 100 m

Condition: good (used), Year of construction: 1998, Ref. -No.: 10664 Manufacturer: HEDELIUS Type: BC 100 Performance Year of construction: 1998 Type of control: CNC Control: Heidenhain 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 3500 / 2 x 1450 mm Kdsdpfx Aoz D Skdjg Aeu Y-Travel: 1000 mm Z-Travel: 700 mm Tool Taper: SK50 DIN 69871 Numbers Of Tools In Magazin: 30 Turning Speeds: 20 - 5000 RPM Rapid Travel X/Y/Z: 30 mm / min Spindle power: 50 kW Minimum distance between spindle nose and table top: 190 mm Further information: - NC software version: 28047629 - PLC: bc80_426_3:07 - Setup 286197 37 The machine can be viewed while powered on by appointment.

Condition: used, functionality: fully functional, Year of construction: 1989, For sale: TRUMPF MINIMATIC 100 punching machine. Lightly used, in excellent condition, and comes with many tools. The machine is connected and can be tested. We can provide training on how to use the machine; all instructions are available. Kdedpfx Aoy Udrmog Asu Specifications: Make: TRUMPF MINIMATIC 100 Made in: Germany Year: 1989 Capacity: 15 T / 150 kN Other: Automatic 9-tool changer Weight: 5T If you have any further questions, please do not hesitate to ask.