Used Allmatic Nc 125 for sale (7,281)

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 07/2027, year of last overhaul: 2022, total length: 1,800 mm, total width: 1,100 mm, total height: 1,550 mm, input current: 32 A, input frequency: 50 Hz, empty load weight: 2,000 kg, overall weight: 2,000 kg, type of input current: three-phase, electrical fuse: 32 A, Gostol SM 125 A spiral mixer Bwodpfx Aeyaf Sdoggon TOP dough kneading machine for a maximum of 200 kg of dough Stainless steel bowl and spiral Protective cover with safety circuit 2 timers and 2 speeds Very robust technology Connection: 400V, 32A CEE plug Dimensions approx.: 1100 x 1800 x 1550/1950 mm, WxDxH Used machine We have other spiral mixers in stock!

Condition: used, Year of construction: 2011, operating hours: 382 h, lifting height: 3,350 mm, motor manufacturer: Elektro, gearing type: automatic, Toyota SPE 125L High-Lift Pallet Truck, year of manufacture: 2011, hours: only 382!, previous owner: German Armed Forces (Bundeswehr), rated capacity: 1,250 kg, lifting height: 3,350 mm, triplex mast, battery: 14/2022, incl. charger, overall height: 1,700 mm, good condition!, immediately operational! On request, we can provide a leasing or financing offer. Mr. Mihm (Tel.) will be happy to assist you. For further details, please refer to our homepage. Subject to errors and prior sale! = Additional Information = Lifting capacity: 1,250 kg Bodpfozbgnvex Aggewn Overall height: 170 cm For more information, please contact Tobias Ebert.

Condition: used, Year of construction: 1980, Machining center Bodpfoyycv Ijx Aggswn

Condition: used, mileage: 125,000 km, power: 350 kW (475.87 HP), first registration: 07/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space length: 4,900 mm, loading space width: 2,360 mm, Equipment: air conditioning, We are very pleased that our offer has sparked your interest, and we assure you that you can purchase a good and affordable vehicle with a verifiable service history from us! Bwodpfxjzax Tho Aggen Special equipment: Axle load - measuring device, front axle load 8.0 t, trailer brake 2 - line, step with handrail on the roof, exhaust pipe extended behind the cab, exterior mirror on the right with maneuvering position, battery 220 Ah, batteries arranged one above the other, CB radio, air horn, electrical pre-installation in the cab 24V / 100 A, cab: steel-sprung, comfort, suspension: front springs 8.0 t, 3 leaves, gearbox 12-speed - type: G 330-12, rear lights construction site version, rear axle bevel gear 300, hydraulic pump (Meiller pump - 7 pistons - 275), folding table in the railing, automatic climate control, additional fuel pre-filter, fuel tank: 290 L steel, left, cooler box / refrigerator, air intake behind the cab, engine brake reinforced, configurable special module, rotating beacon left / right, rear crossmember reinforced, protective plate under the main tank, seats in the cab: driver's seat with massage function, seats in the cab: driver's seat comfort air-suspended seat, exterior sun visor, sunshade roller for side windows, driver and passenger door, steel rims 9.00x22.5, storage flap outside left, additional 24V socket in the passenger footwell, stone guard, underrun protection front, auxiliary heater (water), twin-disc clutch Additional equipment: Emission standard EURO 6, ABS can be switched off, axle configuration: 6x4, trailer socket 24V / 15-pin, Arocs, audio system: radio with USB connection, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air connection in the cab, compressed air tank steel, cab: width 2.30 m, cab: cab entrance movable, cab: tilting device hydraulic, cab: M ClassicSpace, cab floor with engine tunnel 170 mm, suspension: leaf / air, power windows, windshield tinted, generator 100 A, urea tank (AdBlue): 60 L, manually operated sunroof (steel), info display 10.4 cm, interior filter: pollen filter, body / structure: tipper, steering power pump unregulated, air compressor 2-cylinder, air dryer heated, engine 12.8 L - 350 kW R6 diesel (OM 471), engine compartment encapsulation, auxiliary drive MB 131-2c, wheelbase 3300 mm, frame lowering without air spring residual pressure control, ramp mirror, waste heat utilization, rear window, disc brakes with full protection, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger seat, front axle stabilizer, socket cab 24V, tachograph / EC control unit, underrun protection rear fixed, preparation for toll collection, front axle straight, regulated water pump, permissible total weight 26.0 t, oil cooler gearbox GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING Upon request, we will gladly provide you with a LEASING, INSTALLMENT PURCHASE or FINANCING OFFER. SERVICE TÜV / UVV LBW / LGS inspection / Tachograph inspection / Installation of OBU device and service by our AUTHORIZED WORKSHOP before delivery. TOLL / ROAD CHARGES Toll can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale in accordance with our terms and conditions.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 185 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 200 mm, total height: 850 mm, total width: 780 mm, overall weight: 250 kg, spindle speed (max.): 2,000 rpm, spindle motor power: 750 W, product length (max.): 800 mm, number of axes: 3, This 3-axis EMCO PC MILL 125 was manufactured in 2000. It features an X-axis travel of 185 mm, Y-axis travel of 125 mm, and Z-axis travel of 200 mm. The machine includes an automatic tool changer with 10 stations and a clamping area of 420 x 125 mm. If you are looking to get high-quality machining capabilities, consider the EMCO PC MILL 125 vertical machining centre we have for sale. Contact us for further details. Bwjdoy E S Uqspfx Aggen • Tool changer: Automatic, 10 stations • Tool holder: SK 30 (DIN 2080 / DIN 69871) • Feed rate (X/Y/Z): 5–500 mm/min • Rapid traverse: 500 mm/min • Clamping area: 420 x 125 mm • Max. workpiece weight: 10 kg • Power supply: 230 V / 50 Hz Technical Specification Taper Size SK 30

Condition: ready for operation (used), Year of construction: 2002, operating hours: 90,743 h, functionality: fully functional, machine/vehicle number: 1180002913, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain Mill plus, controller model: Mill plus, rotational speed (max.): 10,000 rpm, operating hours of spindle: 31,280 h, coolant supply: 80 bar, spindle nose: HSK 100, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 5-axis machining center DMU 125 FD from DMG (year of manufacture 2002), which is in good and well-maintained condition and can be used in a variety of applications. Key technical data at a glance: Control system: Heidenhain Mill Plus Travel distances: X 1,250 mm / Y 880 mm / Z 800 mm Axes: 5-axis (B: 0–180°, C: 360°) Spindle: 10,000 rpm, 36 kW, HSK 100 Tool changer: 120 positions Coolant pressure: 80 bar Measuring probe available Rotary table D=1200mm + 1 pallet 800x800 for exchange Four-jaw chuck D=1200mm Operating data: Machine hours: approx. 90,743 h Spindle hours: approx. 31,280 h Spindle condition: good Bwsdpfx Agozbbc Ijgjn Further details: CE marking available Known defect: Tool measurement system currently defective The machine will be available from September 2026 and represents an attractive and economical alternative to purchasing a new machine. Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use notice in the purchase agreement (legally required) Sales/transfer conditions: • Dismantling, removal, and transportation are the responsibility of the buyer and at their own risk. • The buyer is responsible for personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can discuss the details directly.

Condition: ready for operation (used), Year of construction: 2003, pressing force: 138 t, number of axes: 6, This 6-axis GASPARINI PBS 1 125/4000 FP was manufactured in 2003. It features a bending width of 4000 mm and a press force of 135 tons. With 4 back gauge axes (x, r, z1, and z2), this machine offers enhanced precision for your bending applications. If you are looking to get high-quality bending capabilities, consider the GASPARINI PBS 1 125/4000 FP press brake we have for sale. Contact us for further details. • Backgauge: 4 axes (X, R, Z1, Z2) Bsdpfozauftsx Aggswn • Press force: 135 t • Bending width: 4000 mm Technical Specification Bending Length 4000 mm

Condition: ready for operation (used), Year of construction: 1959, functionality: limited functionality, The two-roll precision rolling machine applies a pressure of 26,000 kg and features a roller core diameter of 125 mm as well as a total roller body length of 200 mm. The effective strip width is 175 mm, within which a uniform distribution is ensured. The commission number is 59024, which allows the manufacturer to retrieve the exact construction drawings. After some time, the machine stops operating. It is suspected that the electrician should take the following into consideration: • Connection type: Three-phase current 380V/400V (3 phases + neutral + earth). • Power socket: Due to the current intensity (22.8 A), a CEE 32A socket (red industrial socket) is required. • Protection: The motor must be protected with slow-blow fuses (e.g., type C circuit breakers or Neozed fuses) to handle the high inrush current. A 32A (three-pole) protection is recommended. • Motor protection: A motor protection switch set to the rated current (here 22.8 A) is absolutely necessary to protect the motor from overload. Bwjdpfx Ajyzh Tbeggen Important note: The specifications (71.5 rpm, 5 Hz) indicate either a very slow-running special motor or a motor operated via a frequency inverter. Commissioning should only be carried out by a qualified electrician.

Condition: used, Tenoning spindle 2 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum IV 68 Entrance Doors Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 10 NC Window System ----- Cross-cut Saw ----- with laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom rounding unit ----- Axial adjustment travel: mechanically coupled with cut-off saw 1st Tenoning and Slotting Spindle ----- Motor power (with brake): 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position (below table): 5–10 mm Radial adjustment travel: fixed 2nd Tenoning and Slotting Spindle ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Bedpfx Agezawizogewn Tool clamping length: 320 mm Axial adjustment travel: NC axis Radial adjustment travel: NC axis Home position (below table): 5–10 mm 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm 2nd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Horizontal Profiling Unit (Top) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool cutting circle: 130 mm Pneumatic adjustment: 8 positions (axial and radial) 3rd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Vertical Profiling Unit (Right, at Machine End) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 160 ...

Condition: used, mileage: 125,000 km, power: 350 kW (475.87 HP), first registration: 07/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, parking heater, We are delighted that our offer has sparked your interest and would like to assure you that you can purchase a good and affordable vehicle with a verifiable service history from us! Special equipment: Axle load measuring device, front axle load 8.0 t, trailer brake 2 - line, step with handrail on the roof, exhaust pipe raised behind the cab, right exterior mirror with maneuvering position, battery 220 Ah, batteries arranged one above the other, CB radio, air horn, electrical pre-wiring in the cab 24V / 100 A, cab: steel-sprung, comfort, suspension: front springs 8.0 t, 3 leaves, gearbox 12-speed - type: G 330-12, rear lights construction site version, rear axle bevel gear 300, hydraulic pump (Meiller pump - 7 pistons - 275), folding table in the railing, automatic climate control, additional fuel pre-filter, fuel tank: 290 liters steel, left, cool box / refrigerator, air intake behind the cab, engine brake reinforced, programmable special module, rotating beacon left/right, rear cross member reinforced, protective plate under the main tank, seats in the cab: driver's seat with massage function, seats in the cab: driver's seat comfort suspension seat, sun visor outside, sun protection roller side windows, driver and passenger door, steel rims 9.00x22.5, stowage flap outside left, 24V socket in the passenger footwell additionally, stone guard grille, underrun protection front, auxiliary heater (water), two-plate clutch Additional equipment: Emission standard EURO 6, ABS can be switched off, axle configuration: 6x4, trailer socket 24V / 15-pole, Arocs, audio system: radio with USB connection, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air connection in the cab, compressed air tank steel, cab: width 2.30 m, cab: cab entry movable, cab: tilting mechanism hydraulic, cab: M ClassicSpace, cab floor with engine tunnel 170 mm, suspension: leaf / air, electric windows, windshield tinted, generator 100 A, urea tank (AdBlue): 60 liters, manually operated sunroof (steel), info display 10.4 cm, interior filter: pollen filter, body / superstructure: tipper, steering assistance pump unregulated, air compressor 2-cylinder, air dryer heated, engine 12.8 liters - 350 kW R6 diesel (OM 471), engine compartment encapsulation, auxiliary drive MB 131-2c, wheelbase 3300 mm, frame lowering without air spring residual pressure control, ramp mirrors, waste heat utilization, rear window, disc brakes with full protection, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger functional seat, front axle stabilizer, socket cab 24V, tachograph / EC control unit, underrun protection rear fixed, preparation for toll collection, front axle straight, water pump regulated, permissible total weight 26.0 t, oil cooler transmission GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE Bwjdezaly Uepfx Aggon We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING If desired, we will gladly provide you with a LEASE-PURCHASE or FINANCING OFFER. SERVICE TÜV inspection / UVV LBW / LGS inspection / tachograph inspection / installation of OBU device and service by our BRANDED WORKSHOP before delivery. TOLLS / ROAD CHARGES Tolls can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale according to our general terms and conditions. The inf

Condition: used, Year of construction: 2018, dimensions of saw-band 3650x27x0,9 mm speed 15/100 m/min capacity 90 degrees: round 280 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330x260 mm capacity 45 degrees: round 260 mm Bwedpfxeyvvmlj Aggon capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270x200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170x170 mm total power requirement 2,2 kW vice 340 mm weight 1240 kg dimensions 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows "CE" based MEP-50 controller and 7 "touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings; Single stroke 600 mm - repeatable to saw any length. Simple programming - Enter cutting length and quantity and press "START". - Electronic band tension control - Automatic monitoring of the cutting load by a servo-valve mounted directly on the cylinder - Rotation control of the belt with immediate stop in case of a blocked saw band Späneräumbürste and emulsion coolant pump as standard.

Condition: good (used), Year of construction: 1970, functionality: fully functional, Single Column Vertical Turning Lathe | Froriep DS 14 NC The machine was overhauled in 2009, recently cleaned, and is in good condition. - Table diameter: 1,400 mm - Swing diameter: 1,600 mm - Turning height: 1,500 mm - Siemens control type 840 D - Automatic tool changer - Workpiece weight: 6,500 kg - Vertical slide travel: 1,000 mm - Spindle speed: 10–315 rpm Bwjdjyft S Ajpfx Aggjn - Feed rate: 3,600 mm/min Inspection is possible at any time by prior arrangement. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Froriep | DS14 | DS14NC

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Bwjdszaakbspfx Aggon Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Equipment: Coolant system 500 liters with paper belt filter 4 grinding stones (3 of them unused) Bedpfxsy U Upcj Aggswn Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: used, Year of construction: 1997, operating hours: 32,000 h, total height: 2,700 mm, total length: 5,500 mm, total width: 2,500 mm, Colour: White Empty weight: 13.000 kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 120245 - Operating hours: 32000 - Drive system: CNC - Number of axes [pcs]: 5 - X-axis travel [mm]: 1200 - Y-axis travel [mm]: 880 - Z-axis travel [mm]: 800 - C-axis rotation [°]: 360 - Table length [mm]: 1250 - Table width [mm]: 1000 - Tool holder: SK40 - Max. spindle speed [rpm]: 18000 - Options: Digital readout, Tool magazine - └ Type of digital readout: Heidenhain - └ Tool magazine [pcs.]: 30 - Transport dimensions: 5500mm x 2500mm x 2700mm (l x w x h) - Transport weight [kg]: 13000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Bsdpfx Asy Uv U Hjggewn

Condition: used, Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 160 mm, turning diameter over bed slide: 330 mm, swing diameter over cross slide: 160 mm, center height: 165 mm, swing diameter over bed slide: 330 mm, total length: 1,750 mm, total width: 1,350 mm, total height: 1,670 mm, overall weight: 1,300 kg, distance between centers: 750 mm, workpiece length between centers: 750 mm, For sale is a WEILER C 30 x 750 NC lathe. Machine type: C 30 X 750 Machine number: 0F 03 Year of manufacture: 2019 Machine weight: 1300 kg Design: 2 Size: small •3-jaw chuck •Various chuck jaws •11 tool holders •Tailstock •Center distance: 750 mm •Center height: 165 mm •Swinging diameter over bed: 330 mm •Swinging diameter over compound slide: 160 mm •Turning tool cross-section (height x width): 20 x 20 mm •Dimensions: -Length: 1750 mm -Width: 1350 mm -Height: 1670 mm If you have any questions or need more information, please send us a message or call us. Bsdpfx Aey U Iu Soggswn

Condition: used, The ABS 325 S NC is a robust and precise addition to the category of Horizontal Mitre Cutting Bandsaws, belonging to the Auto Miter Bandsaw group by KNUTH. This high-performance production band saw features a dual column design that enhances stability and cutting accuracy. The material feed is powered by a controlled servo motor with ball screw drive, offering a remarkable positioning accuracy of ±0.2 mm. Users can easily program and manage operations via the Omron touchscreen controller, which supports up to 30 programs with 50 steps each. For added flexibility, the ABS 325 S NC includes an option for hydraulic bundle clamping, alongside a digital display for easy reading of manually set miter angles. This fully automated saw excels in applications requiring mitre cuts in solid materials, tubes, and profiles, and is designed for high durability in demanding environments. With features like a hydraulic cutting angle clamping and automatic stroke height control, this saw ensures minimal downtime. You can request a quote for the ABS 325 S NC in the category of Horizontal Mitre Cutting Bandsaws and discover why this Auto Miter Bandsaw is a perfect fit for your production needs. Bjdpfx Aeyq N Iqsggown

Condition: new, The HFS 52 NC, a robust Conventional Surface Grinder from KNUTH, stands out in the Grinding Machines category for its advanced grinding capabilities. This machine is tailored for automatic and semi-automatic surface and flute grinding, offering an impressive grinding area of 520x200 mm. With easy programming via a touchscreen, operators can expect precision and efficiency, which are further enhanced by the automatic grinding wheel dressing mode that integrates seamlessly into machining cycles. Designed for continuous operation, it features dual guides for unwavering linear motion, servo drives for precise adjustments, and a heavy-duty spindle head with maintenance-free bearings. Furthermore, the HFS 52 NC excels in its thermal stability, aided by an external hydraulic unit and an efficient cooling system. Whether for repair workshops or series production, this machine accommodates diverse operational needs. For those looking to elevate their machining process, we invite you to order online and experience the advantages of the HFS 52 NC in your own facility. Bsdpfx Asq R Slgjggown

Condition: excellent (used), Year of construction: 2013, 3 Kaeser CSD 125 compressors 75 kW Year: 2013 Operating hours: 40,000 Bodpszak Aujfx Aggewn Price: €12,000 each

Condition: good (used), Year of construction: 2002, turning diameter over cross slide: 150 mm, spindle bore: 52 mm, turning length: 750 mm, turning diameter: 320 mm, center width: 750 mm, quill stroke: 120 mm, quill diameter: 70 mm, center height: 160 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, total length: 2,800 mm, total width: 1,820 mm, total height: 1,750 mm, spindle motor power: 9,000 W, overall weight: 2,000 kg, NC lathe, control Heidenhain Manualplus 4110, capacity Ø 320 mm, between centers 750 mm, motor 9 kw, spindle speed 20 - 4000 rpm, bore Ø 52 mm, 3- and 4-jaws chucks (6), soft chucks, tool post Multifix + Capto C3 with holders, turning pins, drilling chuck, coolant system, several accessoires in cabinet, manual, YOP 2002, 13'600h, in TOP condition Bsdpoyymx Tjfx Aggswn

Year of construction: 2022, condition: new, grinding diameter:260 mm grinding length:1000 mm centre height:130 mm dimensions of grinding wheel:400x60x127 mm grinding wheel speeds:1700,1900,2200 U/min Bwedeg N Nh Dspfx Aggsn grinding head swivelling:+/- 30 Grad table swivelling +/-:9 Grad Tailstock spindle taper:4 MK grinding wheel motor:4 kW hydraulic motor:1,5 kW work piece motor:0,37 kW net weight:2400 kg gross weight:2950 kg PLC control:Siemens S7 tailstock sleeve movement:pneumatic, via foot padel operating panel:New Rittal operating panel with touchscreen screen from Siemens centers sleeves:2 grinding wheel flange:2 unused cylindrical grinding machine, manufactured by ABA type URS 400 Year, 2009 Further technical data, and standard and optional equipment, as defined in Appendix. Payment: 100% before loading of the machine Warranty: no

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 07/2027, overall weight: 500 kg, total width: 1,100 mm, total length: 1,140 mm, input frequency: 50 Hz, electrical fuse: 16 A, Hubkneter Kemper F 125 SL Stainless steel bowl and kneading arm 2 speeds, 1 timer Flour dust cover Machine is mobile DGUV V3 certified – available only from us Connection: 400V, 16A-CEE plug Dimensions: 1110 x 1140 x 1310/2050mm (W x D x H) Bwjdszaif Uopfx Aggen Used machine We have many more lifting kneaders in stock!

Condition: used, functionality: fully functional, machine/vehicle number: 8701, Year of construction: 1999, operating hours: 2,117 h, load capacity: 1,250 kg, lifting height: 4,360 mm, free lift: 1,700 mm, fuel type: electric, mast type: duplex, fork length: 1,250 mm, drive type: Elektro, High-lift order picker Bwodpfx Agoy Upl Sjgsn Chassis number: 8701 Load center: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: normal Front tire type: Solid rubber Rear tire type: Solid rubber Battery voltage: 48V Battery type: PzS

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8754-0010, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 125/475-120h/80v (1250-120-80) Clamping force [kN]: 1,250 Number of components: 3 Clamping platen width [mm]: 690 Clamping platen height [mm]: 660 Clear tie bar spacing horizontal [mm]: 475 Clear tie bar spacing vertical [mm]: 450 Locating ring diameter [mm]: 125 Minimum mold height [mm]: 230 Maximum mold height [mm]: 560 Bodpfx Agjyguk Asgewn Maximum mold opening stroke [mm]: 450 Maximum ejector stroke [mm]: 140 Thread (mounting holes) [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 700 Turntable threads [M]: 16 Maximum mould weight [kg]: 1,160 Maximum mould weight moving side [kg]: 760 Screw diameter [mm]: EE1: 25, EE2: 22, EE3: 14 Maximum shot weight [g] PS: EE1: 63, EE2: 48, EE3: 20 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). #Tags: DEMAGergo | Ergotec | Multi125-475

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 07/2027, year of last overhaul: 2026, total length: 1,320 mm, total width: 940 mm, total height: 1,370 mm, input frequency: 50 Hz, empty load weight: 500 kg, type of input current: three-phase, electrical fuse: 32 A, TOP Spiral Mixer Kemper SPL 125 Dough machine with stainless steel bowl 2 speeds, 2 timer clocks robust technology machine is mobile connection 400V, 32A-CEE plug dimensions: 940 x 1320 x 1370/1850 mm (W x D x H) only available from us with DGUV V3 certification used machine, refurbished & SAB tested with warranty + spare parts service Bwodpfx Asy U Tvbjggen Optional: maintenance contract spare parts box delivery service instruction & commissioning