Used Alphatec Ad-S 75 Compounding Line for sale (77,733)

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics Fgsdpfxotiy Nto Afuoh

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Fsdpfx Asdzqptsfujgh Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: new, Year of construction: 2024, functionality: fully functional, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 175 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. Standard equipment Capacity (length - ton) 3050mm - 175t Installation height 530mm Outreach 450mm Stroke 265mm Servo drive Y1, Y2, X - 3 axles Control unit - DT 15 Manuel F. AKAS FPSC safety system CE-Fiessler Akas Servo motor backgauge & linear guide & Ball screw system Manual crowning European tool holder Sliding front arms Fodpotr Dk Eofx Afujgh Options - DELEM 69S control unit (3D control) -Motorized crowning - 6 axes X=650mm Y1, Y2, X ,R , Z1, Z2 (6 axes controlled press brake) press brake) -Lower tool European M.460R.85 -European upper tool P135.75.R08

Condition: good (used), Year of construction: 2002, operating hours: 1,378 h, Brand: Berstorff Fgsdoz Eg Awjpfx Afush Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 7376230761, functionality: fully functional, operating hours: 305 h, pressing force: 400 t, stroke length: 365 mm, throat depth: 630 mm, controller model: Durma DT-15, working width: 4,050 mm, TECHNICAL DETAILS Press force: 400 t Max. working width: 4,050 mm Upright distance: 3,400 mm Throat depth: 630 mm Fgsdpfxoy Avu Ao Afujh Max. stroke: 365 mm MACHINE DETAILS Control system: Durma DT-15 Number of axes: 4 (Y1+Y2+X+R) Crowning system: CNC-controlled Dimensions & Weight Dimensions (L x W x H): 5,750 x 2,110 x 3,640 mm Transport weight: 27,760 kg Transport packages: 1 Operating hours: 2,216 h Hydraulic motor hours: 305 h EQUIPMENT Tools Documentation CE marking CE certificate

Condition: excellent (used), Silverson 275 LS High Sheer In Line Mixer / Homogenizer Fgedpfxoym Akks Afueh 1.5" Inlet & Outlet 3 ~ Removed from the stores of a pharma plant in Cork, Ireland. Device is in excellent condition.

Condition: used, Complete Industrial Filling, Weighing & Roller Conveyor System Complete industrial filling and container handling system, previously used in an industrial production environment. The system consists of a stainless steel filling station combined with powered roller conveyors, weighing/control equipment, and automated controls. Main equipment includes: Stainless steel filling station Powered roller conveyor system Mettler Toledo weighing and control equipment Mettler Toledo operator/control panels Siemens SIMATIC PLC control system Hitachi SJ200 frequency inverter SEW geared motors Vector Aandrijftechniek geared motors Stainless steel electrical/control cabinets Product filling connections and hoses Operator platform with stainless steel safety railing Local operator control panels Safety equipment and emergency stops Nomafast high-speed industrial door Associated electrical and mechanical equipment The system appears to have been designed for the automated handling, positioning, weighing, and filling of containers/drums in an industrial production process. Condition: Used industrial surplus Availability: Complete system as shown in the pictures Fgjdpfx Aez Diutofush Location: Rotterdam, The Netherlands The complete system is available for sale. Dismantling and loading can be discussed. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for further information or to make an offer.

Condition: used, maximum load weight: 53,396 kg, overall weight: 62,000 kg, axle configuration: > 3 axles, first registration: 07/2020, next inspection (TÜV): 05/2027, total length: 12,600 mm, total width: 2,470 mm, total height: 1,360 mm, Year of construction: 2020, Additional information: Fedpfjz Ivgwex Afuogh * Type | First axle: Bridgestone R * Tire size | First axle: 385/55 R22.5 * Tire tread depth, inner left | First axle: 70% * Tire tread depth, inner right | First axle: 70% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Bridgestone R * Type | Third axle: Bridgestone R * Type | Fourth axle: Bridgestone R * Type | Fifth axle: Bridgestone R * Tire size | Second axle: 385/55 R22.5 * Tire size | Third axle: 385/65 R22.5 * Tire size | Fourth axle: 385/65 R22.5 * Tire size | Fifth axle: 385/65 R22.5 * Tire tread depth, inner left | Second axle: 70% * Tire tread depth, inner left | Third axle: 70% * Tire tread depth, inner left | Fourth axle: 70% * Tire tread depth, inner left | Fifth axle: 70% * Tire tread depth, inner right | Second axle: 70% * Tire tread depth, inner right | Third axle: 70% * Tire tread depth, inner right | Fourth axle: 70% * Tire tread depth, inner right | Fifth axle: 70% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Maximum axle load | Fourth axle: 9000 kg * Maximum axle load | Fifth axle: 9000 kg * Price on request: Yes * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes * Aluminum rims | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Position | Fourth axle: Rear * Position | Fifth axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brand | Fourth axle: Other * Brand | Fifth axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Brake type | Fourth axle: Disc brakes * Brake type | Fifth axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Suspension | Fourth axle: Air suspension * Suspension | Fifth axle: Air suspension * Lift axle | Second axle: Yes * Lift axle | Third axle: Yes * Lift axle | Fifth axle: Yes * Aluminum rims | Second axle: Yes * Aluminum rims | Third axle: Yes * Aluminum rims | Fourth axle: Yes * Aluminum rims | Fifth axle: Yes Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inform yourself in advance about the costs and procedures in your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Description WE OFFER AN FULLY FUNCTIONAL IN GREAT WORKING CONDITION AND WILL BE AN GREAT OPORTUNETEY INCLUDING FULLY TOOLINGS AND ACCESSORIESS , READY FOR WORK. MACHINE STILL WORKING IN DAILY ORDERS TYPE: HARTFORD HSA 2215 AD + HEIDENHAIN TNC530 IDEAL MACHINE FOR MAKING BIGGER PLATES Fgodpfjydr Imox Afujh MACHINE HAS COOLING TROUGH SPINDLE FULLY EQUIPPED WITH TOOLINGS AND ACCESSORIESS travel: X: 2200 mm Y: 1500 mm Z: 780 mm SPACE BETWEEN TABLE AND SPINDEL: 220-1000mm SPINDLE SPEED:10.000RPM SPINDLE POWER : 30KW - DIRECT DRIVE Tool magazine: 30 Positioning accuracy: 0.01mm Main motor power: 18.5kw TOTAL WEIGHT : 28 TON STANDARD EQUIPMENT: - + TNC SOFTWARE - + HEIDENHAIN three-point measuring bars - + PRE-TENSIONED SPINDLES - + HEIDENHAIN handwheel HR410 - + OIL COOLING OF THE SPINDLE - + CTS cooling through the spindle 20 BAR - + HEIDENHAIN 3D touch probe for workpiece measurement TS640 - + LASER NC-4 F230ZA TOOL MEASUREMENT - + HEIDENHAIN SOFTWARE OPTION 1+ 2 (computer HSCI, CC6222) - + HEIDENHAI PL-510 - + SPINDLE AIR CURTAIN - + OIL SKIMMER - + EXTRA LIGHT - + MACHINE ENCLOSED ON ALL SIDES - + SPINDLE TEMPERATURE COMPENSATION ADDITIONAL EQUIPMENT: WITH MACHINE COMES FULLY ATC TOOLS COMPLETED LOADED TOOLINGS AND ADDITIONAL FULL TOOLS FROM THE TABLE ALL OTHERS TOOLS AND ACCESSORIESS WHICH BELONG TO MACHINE WE ORGANIZE FOR CUSTOMER ALSO DISMANTLING LOADING AND SHIPPING

Condition: reconditioned (used), Year of construction: 1996, No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter No. 1 type K –HS- Y sieve/Mesh 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Melt-Filter No. 2 type K-SWE 180 RS back-flush self-cleaning Fgedpfxjgbffvj Afuoh 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, > find our most-recent stock-list online on our homepage.

Year of construction: 2025, condition: excellent (used), functionality: fully functional, Equipment: CE marking, Excellent, high-quality twin-screw compounding line. Fully equipped and suitable for the production of food, bio-based, and synthetic polymer compounds. Two side feeders with weighing scales, Siemens control PLC system. Output: 250-350 kg/h, depending on the raw material. Main motor: 90 kW. PLA, PHA, PP, PET, PA, ABS, and all other polymers. Fgedpfx Afozzni Houjh The equipment is in very good condition and has been used very little.

Condition: good (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: 2601-0324, The Sprint 42 Linear from DMG Gildemeister is a CNC turning/milling center with 6 linear axes and 2 C-axes. Direct drives enable high acceleration and precise machining operations. It is suitable for demanding series production of parts with a bar diameter of up to 42 mm. Year: 2007 Spindles: Main and counter-spindle, each up to 6,500 rpm; bar passage through main spindle 42 mm, counter-spindle 38 mm. Tool capacity: 26 stations, including up to 11 driven tools; turret with Y-axis for milling and threading operations. Axes / Travels: Slide 1: X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm Slide 2: X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm Rapid traverse rates: up to 30 m/min (X1, Z1, X2, Z2), Y2 up to 18 m/min Fsdpfxjzkgqzo Afujgh Control system: FANUC 160i-TB with 15" DMG SlimLine panel Including IEMCA Boss 545-E bar feeder The IEMCA Boss 545-E bar feeder (Type 32 LL, year of manufacture 2007) is included in the scope of supply and enables the continuous feeding of material up to Ø 42 mm. It operates with 400 V / 50 Hz and requires 6 bar of air pressure; its own weight is approximately 860 kg. Main spindle newly bearing: The main spindle has already been overhauled (new bearing). Inspection & Collection: An on-site inspection is possible. If you are interested or have questions about technical details, please do not hesitate to contact us.

Condition: used, functionality: fully functional, first registration: 11/2024, Year of construction: 2024, We are offering this used LITHEC LithoFlash Inline HBDM XL75 Inpress Control Lithec Heidelberg XL75, year of manufacture 2024. The Lithec system is a suitable alternative to Heidelberg’s InpressControl. Type: LithoFlash® Inline HBDM XL75 Serial Number: GG 0326 Year of Manufacture: 10/2024 The system was removed because the press it was installed in has been sold to Asia, where there is no demand for this system. Inline measurement and control system for offset printing Reduced make-ready times increase job throughput. Significant waste reduction results in direct substrate cost savings. In addition, using a measurement and control system also ensures production quality. Application Areas • For sheet-fed and web offset printing presses with a production width of 52–205 cm • Measurement and control of process ink and special color densities • Monitoring of tone value increase, print contrast, and trapping parameters Customer Benefits • High savings thanks to LithoDyn dynamic control • Minimal energy costs due to flashing LED Fgjdpfjyrp Umex Afuoh • Clearly structured, user-friendly interface • Definable print control strips • Effective protection against contamination thanks to innovative glass/visor system • Long service life and low operating costs Measurement Methods and Sensors • Wear-free sensor system with integrated dust and dirt protection • Density measurement in accordance with ISO standards • Parallel measurement of all density channels over the entire print width • Measurement of each sheet • 0/45° optics • Maintenance-free, long-life LED measuring light • Polarizing filter • Measuring range: 0.0 – 2.2 D • Use of existing print control strips possible • Selectable height, width, and configuration of measurement fields (minimum size 3×4 mm) • Strip library for optional use of various print control strips • Reproducibility: 0.01 D depending on measurement conditions • Line speed up to 15 m/s Scope of Delivery • Sensor crossbar • Control unit, industrial PC with 23” touchscreen • For the operation of necessary electrical and mechanical assemblies • Advanced Dust Protection (enhanced contamination protection) • LithoDyn (dynamic control) • LithoJobChange (dynamically controlled job change) • LithoFlash One Shot (measurement and control with press at standstill) Naturally, the system can also be installed on machines other than the XL75, such as: KBA RMGT Komori Manroland If you have any questions or would like further information, feel free to send us a message or give us a call.

Year of construction: 2006, operating hours: 20,000 h, condition: used, functionality: fully functional, machine/vehicle number: 114058, Used Metla Toledo Safe Line Metal detector Used for 60,000 Buns per hour Taken out of commission in 2024 Air Reject system Reject Bin with Hood and sensor Belt Included Fgedpsy R S Izjfx Afush Lh hand machine Rh Hand Machine

Condition: used, The set on offer is a complete MAREL SmartLine Grader weighing and sorting system in Dual Lane configuration, featuring two independent belts, each served by its own row of sorting output bins on the side of the machine, allowing for higher throughput than a single-lane configuration. The set additionally includes 2 infeed conveyors, model INF-PROL 031-02, 2 dynamic weighing stations (Dynamic Weighing Unit, model DWU, year 2014, range 250 g–6 kg), and 2 sorting stations (target batcher). The system is designed mainly for fish products but works well with most other food products too. How does the MAREL SmartLine Grader Dual Lane system work? Product is fed onto the line via two infeed conveyors, model INF-PROL 031-02, which deliver raw material to the weighing stations in a steady, controlled manner. Each of the two dynamic weighing stations (DWU) measures the weight of individual product pieces within a range of 250 g to 6 kg, passing the data to the control system. Based on the measured weight and programmed sorting criteria, the two sorting stations (target batcher) direct the product to the appropriate output bins, enabling precise batching to a target weight with minimal giveaway. The open, hygienic IP69K-rated construction allows for fast disassembly and pressure washdown, while an intuitive touchscreen panel provides ongoing monitoring and control of the sorting process. Key advantages of the MAREL SmartLine Grader Dual Lane system The Dual Lane configuration, with two independent belts and separate rows of sorting output bins, handles significantly higher production volumes than single-lane systems while maintaining high sorting precision. The doubled set of infeed conveyors, weighing stations, and sorting stations allows for two independent lines to run in parallel or for doubled throughput on a single process. The high weighing accuracy of the DWU stations minimizes product giveaway, translating directly into raw material savings across overall production. The hygienic, open-frame IP69K-rated construction, together with fast disassembly and reassembly, makes it easier to maintain the high cleanliness standards required in the food industry, while integration with MAREL software provides real-time production insight and batch traceability. Technical specifications of the MAREL SmartLine Grader Dual Lane system MAREL SmartLine Grader Dual Lane Manufacturer: MAREL (JBT Marel) Model: SmartLine Grader – Dual Lane configuration Number of lanes: 2 independent belts, each with its own row of sorting output bins Protection rating: IP69K Control panel: touchscreen, with real-time monitoring and reporting software Application: mainly fish products, also works well with most other food products Fgsdez Haq Djpfx Afujh Infeed conveyors (2x INFEED Conveyor) Model: INF-PROL 031-02 Quantity included: 2 units Dynamic weighing stations (2x DWU) Model: DWU (Dynamic Weighing Unit) Year of manufacture: 2014 Weighing range: 250 g – 6 kg Quantity included: 2 units Sorting stations (2x target batcher) Quantity included: 2 units Application of the MAREL SmartLine Grader Dual Lane system

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 1,000 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, nominal power (apparent): 35 kVA, torque: 70 Nm, controller manufacturer: Siemens, controller model: SINUMERIK 828D (z interfejsem ShopMill), workpiece length (max.): 1,000 mm, workpiece width (max.): 600 mm, workpiece height (max.): 780 mm, workpiece weight (max.): 1,000 kg, total height: 2,800 mm, total length: 2,900 mm, total width: 2,100 mm, table width: 600 mm, table length: 1,160 mm, table load: 1,000 kg, rotational speed (max.): 10,000 rpm, overall weight: 6,800 kg, spindle speed (max.): 10,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 780 mm, spindle motor power: 11,000 W, number of spindles: 1, tool length: 300 mm, tool diameter: 80 mm, tool weight: 7,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: USB port, cabin, centralized greasing system, chip conveyor, documentation/manual, lighting, rotational speed infinitely variable, type plate available, TBI VC 1060 Smart Mill New Line – Vertical CNC Machining Center We have for sale a vertical CNC machining center, the TBI VC 1060 Smart Mill New Line, equipped with a Siemens 828D + ShopMill control system and a 15-inch touch panel. The machine features an SK40 spindle up to 10,000 rpm, a 24-position tool magazine with a fast, dual-arm tool changer, and digital axis drives. Linear guides in the X/Y/Z axes provide rapid traverse rates up to 36 m/min. Key technical data: - Control system: Siemens 828D + ShopMill - Operator panel: 15" touch panel - X-axis travel: 1000 mm - Y-axis travel: 600 mm - Z-axis travel: 650 mm - Table surface: 1100 × 500 mm - Max. table load: 1000 kg - T-slots: 5 × 18 × 100 mm - Spindle nose to table distance: 140–790 mm - Spindle taper: SK40 - Max. spindle speed: 10,000 rpm - Spindle drive power S1/S6: 11/23 kW - Spindle drive: AC, belt drive - Rapid traverse X/Y/Z: 36/36/36 m/min - Positioning accuracy: ±0.005 mm - Positioning repeatability: ±0.003 mm Tool magazine - Type: drum type - Number of positions: 24 - Tool changer: fast, dual-arm - Max. tool diameter: 80 mm - Max. diameter with free adjacent position: 150 mm - Max. tool length: 300 mm - Max. tool weight: 7 kg Equipment - Siemens 828D + ShopMill control system with 15" touch panel - Threading without a compensating chuck - Spindle-through coolant at 20 bar - Spindle temperature stabilization - Spindle air blow system - Tool cooling with air and coolant - Linear roller guides for X/Y/Z axes - Telescopic guides for X/Y/Z axes - Pneumatic counterbalancing for the Z-axis - Digital axis drives - Oil skimmer - Data transmission V.24 / RS232-C / USB Fgodpfx Aoz Iymzofush - Manual spray guns for rinsing the work area - Electrical cabinet cooling - Central lubrication system - Lower chip flushing system - Integrated chip conveyor with cart Cooling system - Tank capacity: 300 l - Flow rate: 200 l/min - Spindle-through cooling: 20 bar Dimensions and weight - Machine dimensions (L × W × H): 2900 × 2100 × 2800 mm - Weight: 6800 kg - Total power consumption: 35 kVA Year of manufacture: 2020 Location: Krakow Price: 45,000 EUR The machine is available for sale. Additional photos, technical documentation, and detailed information regarding equipment and terms of sale can be provided.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2124, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,375 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, 5-axis machine Pallet size: 800 × 800 mm Automatic workpiece change: 5 pallets CNC control: FANUC 15M Spindle: 22 kW – 4000 rpm, FANUC Axis motor (20 m/min) + drive: FANUC Fsdpfx Ajyzxyxefujgh Tool magazine: 118 tools, type 50, DIN 69871

Condition: new, Year of construction: 2024, Bending capacity: 60 tons Bending length: 1250 Distance between stands (mm): 1050 Stroke (mm): 265 Overhang: 410 Installation height: 530 Operating speed Y (mm/sec): 10 Motor power kW: 7.5 Operating speed X (mm/sec): 250 Length (mm): 2300 Width (mm): 1550 Height (mm): 2750 Weight (kg): 3,100 Standard accessories: Y1, Y2, X, R (4 axes) X=650mm X,R Control unit - DURMA DT15 European clamping system 60mm die holder (for European dies only) Overhang: 410 Rear stop: Siemens DC servo motor, linear guide, and ball screw system Protective cover Fgedpfx Aed E If Sefuoh Optional accessories: European upper tool P97.75.R08 (one part is split) European lower tool M.460R.85 (one part is split) DURMA quick clamping system CE marking with manual F.AKAS II M -FPSC-B-C + safety cover & switch Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Condition: used, Year of construction: 1971, x-travel 13000 mm y-travel 2750 mm z-travel 3000 mm turning speeds 600 U/min spindle taper ISO 50 milling head 4 No. 11137 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Fgodpeyqvl Ajfx Afush Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2012, grinding length 1000 mm grinding width 600 mm workpiece height 600 mm table surface area 1360 x 590 mm feed x-axis 30 - 30.000 mm/min feed y- axis 1200 mm/min Feed z- axis 1500 mm/min. stroke of the table 1200 mm spindle diameter 60 mm grinding wheel size 400 x 100 x 127 mm Fsdpfxez Icr Te Afusgh spindle speeds (infinitely variable) 1000 - 3500 U/min weight of the machine ca. 6,5 t dimensions of the machine ca. 4,10 x 3,70 x 2,85 m

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250108, total height: 2,200 mm, overall weight: 700 kg, total length: 1,700 mm, total width: 1,300 mm, type of input current: three-phase, workpiece weight (max.): 75 kg, tank capacity: 120 l, usable tank capacity: 60 l, input voltage: 400 V, rotational speed (min.): 50 rpm, rotational speed (max.): 180 rpm, power: 4 kW (5.44 HP), input current: 16 A, warranty duration: 12 months, Equipment: rotational speed infinitely variable, The Turbo-Line 120 “S” model has a stainless steel ejection box mounted directly on the deburring machine. When the bowl lowers, the chips fall through a grid while the parts to be deburred remain on top. This Turbo-Line machine includes a Fgjdpfx Aovvu Snjfuoh 120-litre drum with vertical, straight sides and a separate base that rotates at an adjustable speed, normally between 115 and 135 rpm, but adjustable from 50 to 180 rpm. During operation, the grinding bodies inside the bowl create a uniform, spiral movement reminiscent of a twisted sausage. All areas of the machine that come into contact with the product, including the drum and the base, are coated with at least 26 mm of yellow polyurethane (PU) to ensure a long service life. The 120 liter work bowl can process up to 50-60 liters of product per batch, depending on the shape and size of the parts. The deburring parameters such as time and speed are individually controlled via a manual touch screen. The addition of water and compound is done via a manually adjustable ball valve, which is included in the delivery. The finished products are discharged by tilting the bowl, a process controlled via the touch screen. The emptying speed is also adjustable via the frequency converter on the touch screen.

Condition: refurbished (used), Year of construction: 2008, Rademaker Crusto Bread Line 600 mm. The Rademaker Crusto Bread Line is a versatile production line for manufacturing a wide range of artisan bread products. Designed for gentle dough handling and consistent product quality, this line combines dough sheeting, gauging, folding, cutting, topping and product transfer in one efficient production process. The line is equipped with a fully automatic Siemens PLC control system with colour touchscreen, allowing quick recipe selection and easy operation. Thanks to its modular design, the line can produce various bread products with high flexibility and consistent results. year of build 2008 suitable for production of Ciabatta Folded bread Artisan baguettes Coffee bread (Kranssi) Muhku Niittypitko Various folded and topped bread products main features 600 mm working width X-Pack dough sheeting system Multiple flour dusting stations Quick reducer gauging station Two-roll gauging station Cross roller Dough lane spreading conveyor Folding module Guillotine cutting module Diagonal baguette cutter Water spray unit Universal topping module Retracting belt Siemens PLC with colour touchscreen Recipe management Capacity Muhku – up to 10,000 pcs/hour Ciabatta – up to 7,200 pcs/hour Folded bread – up to 4,800 pcs/hour Coffee bread Kranssi – up to 2,000 pcs/hour Niittypitko – up to 2,000 pcs/hour Capacities depend on product dimensions, configuration and dough characteristics. Fgjdpjzub Rqsfx Afuoh Technical specifications Working width: 600 mm Voltage: 3 x 400 V + N + PE, 50 Hz Control voltage: 24 VDC Power consumption: 21.9 kW Average air consumption: 196 Nl/min Maximum air consumption: 548 Nl/min Dimensions: approx. 21,000 x 3,000 x 6,000 mm

Condition: refurbished (used), Complete cheese grating line for cheddar or Mozzarella cheese blocks. Cheese blocks are cubed and fed to the Cheese grater then up a conveyor dosed with powder and tumbled Arcall Cheese cutter, transfer conveyor, Urschel CC grater, incline conveyor and tumble mixing drum Can produce 1,000 Kg of grated cheese per hour. Fgodpfxep T Tghj Afujh A Weigh bagging system can be added to the grated cheese line

Condition: excellent (used), functionality: fully functional, machine/vehicle number: ZE60 A- Econ EUP 600, Stock- No.: 2858 1 used, partly overhauled and tested compounding-pelletizing line, consisting of: Berstorff ( Krauss Maffei ) compounding extruder Type ZE 60 A - 34 L/D twin-screw co-rotating extruder Extruder drive 160 kW AC Degassing with vacuum pump Laser separating head / melt filter Eprotec Melt x10 melt pump ECON EUP 600 underwater pelletizing system, complete with Start-up polymer diverter valve incl. hydraulic Fgedpfx Aey At N Rsfush Water system, complete incl. pellet spin-dryer / centrifuge Control boards with Siemens Touch panel >> 12-month PLASTICO warranty OPTIONAL at extra cost: Material conveying Gravimetric loss-in-weight dosing-blending Granule classification Pellet filling station for Big Bags or Octabins Start-up in your factory by our Technicians We have more complete compounding extruders, pelletizing systems, loss-in-weight gravimetric blenders & more in Stock. Visit us in D 42329 Wuppertal or send us your inquiry, you´re welcome.

Year of construction: 2024, condition: as good as new (ex-display), Bending force: 2200 KN Bending length: 3050 mm Distance between columns (mm): 2600 mm Stroke length (mm): 265 mm Overhang: 410 mm Installation height: 530 mm Operating speed Y (mm/sec): 10 mm/sec Motor power: 18.5 KW Operating speed X (mm/sec): 500 mm/sec Operating distance R (motorized): 350 mm Length: 4250 mm Width: 1700 mm Height: 2750 mm H7s8pkvti Weight: 11500 kg Standard equipment: Y1, Y2, pressure beam – axes (individually controllable) X and R axes CNC controlled. Control unit – ModEva 19T Servo motor for back gauge & linear ball screw system (X-R) (AL) CNC controlled crowning European tool clamping system Adjustable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standards Electrical equipment according to worldwide standards Optional accessories: Bending upper tool H=66.5 (one of them split) Bending lower tool 4V die (one of them split) Fjdpfx Afed R Elcousgh D-Bend 3D CAD/CAM import & simulation program The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Vsiqjq Further machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.