Double-column hydraulic press, double-column press, straightening press, hydro press
ALPHA TEC -- ALPHATEC RPS 5000

Name: ALPHA TEC -- ALPHATEC RPS 5000
Brand: ALPHA TEC -- ALPHATEC
Price: 65000 EUR
Availability: InStock

Fixed price plus VAT

€65,000

Condition

Used

Location

Hessisch Lichtenau Germany

Double-column hydraulic press, double-column press, straightening press, hydro press ALPHA TEC -- ALPHATEC RPS 5000

Show map

Machine data

Machine type:: Double-column hydraulic press, double-column press, straightening press, hydro press

Manufacturer:: ALPHA TEC -- ALPHATEC

Model:: RPS 5000

Condition:: used

Price & Location

Fixed price plus VAT

€65,000

Location:: 37235 Hessisch Lichtenau

Call

Details about the offer

Listing ID:: A384-7567

Reference number:: 57682

Update:: 11.03.2026

Description

Machine not operational – control system not running
Bledpjdzqptofx Afpef
Special price
Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000
Serial No. 300487 Year of manufacture: 2006
Pressing force: 500 tons
Column gap front and rear: 2520 mm
Table surface: 2500 x 2500 mm
Ram surface: 2500 x 2500 mm
Ram stroke: 600 mm
Installation height max.: 600 mm
Table height above floor: approx. 900 mm
Tank capacity: approx. 1000 liters
Ram retraction force: approx. 22 tons
Adjustable approach speed: 100-800 mm/s
Pressurization to 5000 kN: approx. 0.7 sec.
Return speed: approx. 300 mm/s
Main motor power: 75 kW
Control pump motor power: 2.2 kW
Power supply: 400 Volt, 50 Hz
- 8-position flat guide for the ram
- Hydraulic ram locking at TDC
- Freestanding control cabinet (200 x 50 cm)
- Siemens PLC control S7-314
- Operation via Siemens OP 170-B (5.7”)
- Two-hand control desk, freestanding
- Floor-level installation
- Table plate 2510 x 2530 x 135 mm (approx. 6700 kg)
- Central lubrication
- Operating manual with circuit diagrams
Required space (L x W x H): 372 x 260 x 460 cm
Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm
Weight: approx. 50 tons
The machine was used for straightening heated steel flanges.
From insolvency – in good condition.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2013

598 listings online

Call

Send inquiry

Telephone & Fax

+49 5602 ... show

Fax:

These listings may also fit your interest.

Listing

Small series press Hidrobrasil Doppelständerpresse

Gelsenkirchen

7,653 km

Small series press
HidrobrasilDoppelständerpresse

Call

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 160 t, Hydraulic 160 T double cylinder insertion press Double column press- two cylinder press with 160 T capacity at 250 bar. a) idle speed downward 9,8 mm/sec. b) upward speed up to 15,0 mm/sec. c) table size 1500x600x100 mm, height adjustable d) ram plate, 1500x600x100 mm e) year of construction 12/2020 f) motor power 11 KW g) pump capacity 22 L/minute h) travel limitation by cam switch i) Open height 700 mm j) ram travel 500 mm k) Remote control via two-hand operation l) Pressure setting via rotary control from approx. 30 to 160 T m) Approx. height 2800 mm n) T-slots according to customer requirements o) Weight approx. 4,200 kg Bledpfx Asgz H Dhjfpof p) Oil tank with approx. 200 L volume q) Painting in RAL 5005 ( royal blue ) or according to customer's request. r) For safety reasons the ram plate is painted orange RAL 2009 or signal yellow RAL 1023 s) Assembly, commissioning, instruction can be provided at a separate charge. The travel can be adjusted by cam switches. The ram/table size of the machine shown is 1600x600x100 mm.

See details

Listing

Hydraulic Try-out Press Calende Probierpresse

Ennepetal

7,683 km

Hydraulic Try-out Press
CalendeProbierpresse

Call

Condition: new, Year of construction: 2018, machine/vehicle number: DF0199 - Rev.00, pressing force: 160 t, pressure:160 t passage width:1200 mm stroke:600 mm Weight of machine approx.:7 t dimensions:ca. 2400 x 1400 x 3400 mm return capacity:16 t Max Working height:800 mm Return Speed:25 mm/sec pestle plate:1670 x 800 mm table plate:1670 x 800 mm table height over floor:800 mm Oil cooling (electric):1,5 kW (max) Engine Output:18 kW speed of forward flow:10 mm/sec pressure speed:10 mm/sec Travel:600 mm Bljdpfxjdxvfho Afpef Oil Tank Capacity:300 l

See details

Listing

Agios Athanasios

9,406 km

Hydraulic press
MULLER250t

Call

Listing

Hydraulic press, Four column press 100 t Eitel

Tatabánya

8,570 km

Hydraulic press, Four column press 100 t
Eitel

€10,000

Fixed price plus VAT

Call

Listing

Birmingham

7,072 km

Hydraulic Press
HounselH Frame

Call

Year of construction: 2012, condition: used, Hounsell down stroke Hydraulic forming press H frame Year 2012 200ton Daylight 750mm Nominal Table size W x L 2100mm x 1200mm Max Weight top tool 800kg Bodpef A R Uhsfx Afpolf Max system Pressure 340 bar Ram diameters 110mm Number of Rams 6 Seal Dimensions 110 x 130 x 16 Machine construction fabricated frame Machine weight 95000 kg approx Approach speed 150mm/s Pressing speed 8mm/s Return speed 80-90mm/s Can quote for new hydraulic presses c and h frame

See details

Listing

Klundert

7,497 km

Hydraulic press
Van De GraafHVK-300

Call

Listing

Kaunas

8,297 km

Gluing press
JoosHP-S 80

€5,960

ONO plus VAT

Call

Condition: good (used), Year of construction: 2004, machine/vehicle number: 1855680, functionality: fully functional, power: 4 kW (5.44 HP), input frequency: 50 Hz, pressing force: 80 t, table width: 800 mm, table length: 1,400 mm, operating pressure: 270 bar, Manufacturer: Joos Model: HP-S 80 Year of Manufacture: 2004 Pressing Power: 800 kN Three-Piston Suitable for woodworking and industrial applications Well-maintained and in good working condition Previously used in a company setting, reliable and durable. Despite the dust, this Hydraulic Press continues to deliver reliable performance. Bledpjrp D Easfx Afpjf Contact us today to arrange a viewing or to inquire further information.

See details

Listing

Four Column Press - Hydraulic SICMI PSQ 300 A

Austria

8,415 km

Four Column Press - Hydraulic
SICMIPSQ 300 A

€172,500

Fixed price plus VAT

Call

Condition: new, neu ca. 4 Monate ab Auftragse Italien 172500 € 3260.25 € 300 to 500 mm 1250x1000 mm 600 mm 22 mm/s 2 mm/s 7.5 kW 1750 mm 1500 mm 2800 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Bedswir Acepfx Afpelf Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

See details