Used Arburg 680Cb 400-170 for sale (20,272)

Condition: used, Year of construction: 2012, operating hours: 55,800 h, clamping force: 100 kN, displacement volume: 201 cm³, injection pressure: 2,000 bar, overall weight: 5,400 kg, screw conveyor diameter: 40 mm, terms of delivery: EXW (ex Works) delivery time: on request Kodpfx Anoylpyvjwsdn terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2012, operating hours: 55,400 h, clamping force: 100 kN, displacement volume: 201 cm³, injection pressure: 2,000 bar, overall weight: 5,400 kg, screw conveyor diameter: 40 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Kodsylpy Aepfx Anwjdn

Condition: used, Year of construction: 2012, operating hours: 69,990 h, clamping force: 320 kN, displacement volume: 154,314 cm³, injection pressure: 25,001,280 bar, overall weight: 14,500 kg, screw conveyor diameter: 3,550 mm, terms of delivery: FCA Pegnitz Kjdsxl Hi Tjpfx Anwjdn delivery time: on request terms of payment: 100% prior to delivery

Condition: good (used), 1x used Arburg 370U 500-170 With Multilift Kdjdpfx Aneyym R Nowsn Immediately available!

Condition: good (used), Year of construction: 2008, operating hours: 60,902 h, functionality: fully functional, machine/vehicle number: 206087, clamping force: 400 kN, screw diameter: 22 mm, displacement volume: 34 cm³, For sale is an Arburg injection moulding machine, type 270 U 400-70. The machine is fully functional and ready for immediate operation. Technical data: Year of manufacture: 08 / 2007 Auto operating hours: 60,902 h Serial number: 206087 Operating voltage: 400 V Control voltage: 230 V (~ 50 Hz) / 24 V Rated current: 82 A / 39 A Clamping force: 400 kN Kdjdpfx Ansyk Tlaswsn Tie-bar distance: 270 mm x 270 mm Injection unit: size 70 Screw diameter: 22 mm Control system: Selogica Included accessories: Core pull, pneumatic needle shut-off, Selector chute

Condition: good (used), Year of construction: 2006, operating hours: 81,912 h, functionality: fully functional, machine/vehicle number: 202150, clamping force: 180 kN, For sale is an Arburg injection molding machine, model 170U 180-70. The machine is fully functional and ready for immediate use. Technical data: Year of manufacture: 2006 Operating hours: 81,912 h Cylinder diameter: 18 mm Clamping force: 180 kN Kodpfx Asyxm Thonwodn Needle shut-off: Pneumatic Internal pressure sensor Transport and loading can be arranged Europe-wide at additional cost upon request. All prices are subject to VAT. Inspection is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production needs? Or do you wish to sell your own? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2013, operating hours: 36,163 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, displacement volume: 59 cm³, ARBURG Allrounder 375 V 500-170 Stock no.: 503615 Manufacturer: ARBURG Model: Allrounder 375 V 500-170 Control: Selogica-direct Year of manufacture: 2013 Operating hours: 36,163 h Technical Data – Clamping Unit Clamping force: 500 kN Minimum mold height: 200 mm Maximum mold height: 550 mm Kdodpfoytdfijx Anwjn Maximum platen distance: 302 mm Opening stroke: 225 mm Rotary table diameter: 900 mm Ejector force: 70 kN Movable platen centering diameter: 125 mm Tool weight: 230 kg Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 59 cm³ Injection pressure: 2,500 bar Screw length: 24 l/d Screw speed: 35 rpm Screw torque: 210 Nm Number of heating zones: 5 Dimensions & Weight Machine dimensions (LxWxH): 3 m x 1.6 m x 3.48 m Total weight: 3,540 kg Equipment Display language: German Rotary table 1x hydraulic core pull Machine with water battery Machine without material hopper Levelling elements EUROMAP 67 handling interface EUROMAP 73 interface Interface for ejector plate safety

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,626 h, clamping force: 100 kN, screw diameter: 25 mm, Hydraulic injection moulding machine manufactured in 2014. This Arburg 470 H 1000-170 features a closing force of 100 tons and a screw diameter of 15/25 mm. It includes a selection unit and a single platen design, with a beam spacing of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 470 H 1000-170 machine we have for sale. Contact us for further details. • Selection unit: yes • Single platen: yes • Beam spacing: 470 x 470 mm • Operating hours: 22,626 h • Electricals: • Operating voltage: 400 V, 3~, 50 Hz • Control voltages: 230 V, 50 Hz; 24 V~ Kdjdpfx Aeytqlconwon • Motor/heating rated current: 80 / 58 A • Total rated current: 138 A • Total connected load: 75 kW • Condition note: small servo motor problem Additional equipment • Geiger handling (optional)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,171 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • High wear-resistant version • Sinter-metal check ring • CrN coating on screw and check ring • Suitable for abrasive, corrosive, and high-temperature thermoplastics • Technology level 2 – servo-controlled, dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system: • Touchscreen operation with process editor • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) Kedpfoyg I Ihex Anwjdn • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Hours: 9,171 Additional equipment • None included in the listing • Note: Machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Year of construction: 2007, condition: ready for operation (used), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine. • Drive technology: • Electromechanical main movements by servo drives: dosing, injection, mold open/close, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Small hydraulic unit with accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine platens with centering ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal 400 injection unit • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing assembly D25 mm, high wear/corrosion resistance; open nozzle (220/25), flat nozzle tip (300/00), heater band (320/00) (Pos 060/25) • Heater band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) • Without hopper (Pos 600/06) • Servo-regulated, programmable nozzle contact force (Pos 408/03) • Clamping unit: • Five-point double toggle with servo-electric adjustment Kdjdpfxox D Hgve Anwjn • Electric mold height adjustment • Prepared for mounting a linear robot on the fixed platen • Mold protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blow unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, regulated and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, electrical cabinet, interfaces: • Selogica control • Software packages (Pos 555/01–555/07): Extended mechanical cycle controls; Extended movements; Production control; Optimization/Operator assistance; Quality assurance control; Documentation • Temperature-regulated electrical cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) • Operator authorization by card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) • Additional socket combination with RCD (Pos 444/01) • 12 mold temperature measurement zones (Pos 469/12) • Additional heater band for nozzle (Pos 468/01) • Interface for HB-Therm mold temperature controller (Pos 453/01) • USB serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for color dosing unit (Pos 493/00) Additional equipment • Electric conveyor belt, programmable (Pos 412/02) • Sorting flap for separating good/bad parts (Pos 375/00)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 13,361 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force; extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High wear-resistant version; sinter-metal check ring; CrN coating on screw and check ring • Suitable for abrasive, corrosive and high-temperature thermoplastics • Technology level 2: servo-controlled, dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) Kodpfx Ansyg I Egewjdn • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Hours: 13,361 Additional equipment • None included as listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Condition: ready for operation (used), Year of construction: 2010, screw diameter: 25 mm, This Arburg 470 S 800-170 was manufactured in 2010. A hydraulic injection moulding machine featuring a clamping force of 80 tons and tiebar spacing of 470x470 mm. It operates on 400 V 3~ 50 Hz with a total connected load of 76 kW. Consider the opportunity to buy this Arburg 470 S 800-170 hydraulic injection moulding machine. Contact us for more information. Kjdsx D R Epepfx Anwsdn • Tiebar spacing: 470x470 • Single platen: Yes • Operating voltage: 400 V 3~ 50 Hz • Control voltage: 230 V ~ 50 Hz, 24 V DC • Motor/heating rated current: 76 / 59 A • Total rated current: 135 A • Total connected load: 76 kW • Optional: Geiger Handling

Condition: excellent (used), Year of construction: 2017, operating hours: 14,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter und Drehteller Hersteller: ARBURG Typ: 470S1100-400/290 Baujahr: 2017 Schließkraft: 110 Tonnen Holmabstand 420 x 420 mm Einbauhöhe min. /max.: 450 mm Öffnungsweg: 950 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 141 g/PS Schnecken DN 2: 30 mm Hubvolumen: 106 cm³ Spritzteilgewicht: 97 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Drehteller 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2010 Förderband Schutzzaun Kdsdpfx Anou E E Suswjn

Condition: excellent (used), Year of construction: 2011, operating hours: 55,806 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, total length: 4,700 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 4,850 kg, For sale is an Arburg injection moulding machine, model 470 C 1500-400. The offer includes Arburg handling, type Multi Select Axis X/Y/Z 600/600/1400 mm. The machine is in excellent condition and ready for immediate use. Technical data: Year of manufacture: 2011 Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Mounting plate: 650 x 650 mm Ksdpfx Anow E Itiswjdn Operating hours: 55,806 h (pump) Injection unit: Ø 45 / SP 400 Shot volume: approx. 254 cm³ Shot weight: approx. 232 g Injection pressure: up to 1,580 bar Dimensions: approx. 4,700 x 1,700 x 2,000 mm Weight: 4,850 kg Transport and loading can be organized Europe-wide upon request (at extra cost). All prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: used, Year of construction: 2005, operating hours: 63,000 h, functionality: fully functional, clamping force: 400 kN, screw diameter: 25 mm, For sale is an injection molding machine of the brand Arburg and the type 270S 400-60 The machine is fully functional and ready for immediate use Technical data Year of construction: 2005 Operating hours: 63,000 h Cylinder: Ø 25 Clamping force: 400 kN Core pull: 1*Hydraulic Internal pressure transducer On request, transportation and loading can be organized at an extra charge. can be organized throughout Europe. Prices plus VAT Kedpou Hqh Rsfx Anwodn Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2005, operating hours: 67,200 h, clamping force: 180 kN, screw diameter: 30 mm, For sale is an injection molding machine of the brand Arburg and the type 170 U 180-70 The machine is in a technically good condition and has been fully functional and professionally dismantled Technical data: Kodpfx Astwadvsnwjdn Year of construction 2005 Machine no.: 198067 Clamping force: 180kN Operating hours: 67,200 Cylinder: D30mm Distance between tie bars: 170 mm Dimensions: 2.690*889*1831 Weight: 1,650 kg Selector switch and conveyor belt included in the offer Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Kodpjw Rqwtefx Anwjdn

Year of construction: 2009, condition: ready for operation (used), Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement. Kdedpsx I Rqcjfx Anwon

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Kdodpfoyab I Uox Anwjn

Year of construction: 1997, condition: ready for operation (used), Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible. Kdjdpjrc Hibsfx Anwjn

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Kodeyab Nfopfx Anwedn

Condition: used, Year of construction: 2010, Injection molding machine Arburg Allrounder 470 H 1000-170, year 2010 Clamping force: 1000 kN Screw diameter: 30 mm Screw length: 930 mm Shot weight: 77 g Ksdpjw E Ev Uefx Anwjdn With Arburg robot The machine can be inspected under power at any time!

Condition: excellent (used), Year of construction: 2008, operating hours: 45,343 h, clamping force: 1,500 kN, screw diameter: 35 mm, injection pressure: 2,000 bar, injection weight: 141 g, Arburg 520S-1500-400 (217) General information Product Code: (217) Availability: In Stock Year of production: 2008 Brand: Arburg Technical data Shot Weight: 141 g Clamping Force: 1,500 kN Screw dia: 35 mm Injection pressure: 2000 bar Tie bar distance: 520 x 520 mm Platen size: 688 x 688 mm Mould height min.: 250 mm Type of controls: Selogica Language: English,German Power: 33,9 kW Workinghours: 45343 h Weight: 6490 kg Dimensions: 4,9 x 1,7 m Ksdevt Sixepfx Anwedn Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes Heating channels: Yes

Condition: good (used), Year of construction: 2016, operating hours: 13,879 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, The machine is in decent condition and is equipped with a 3-position rotary table (3x120°) Year of manufacture: 2016 Operating hours pump: 17,263 Operating hours production: 13,879 Location: Southern Germany Contrary to the specification, the light curtain is not installed, as we operated the system with an enclosed automation (see photos). However, the components of the light curtain are available and will be sold with the unit. The part-specific automation and the feed hopper shown in the photo are not for sale. It is technically possible to convert the system to a 2-position rotary table (2x180°). This could be ordered by the buyer directly from Arburg after purchase. Ksdpfx Anewnfw Djwodn Ex works sale

Condition: excellent (used), Year of construction: 2009, operating hours: 3,645 h, clamping force: 2,500 kN, screw diameter: 35 mm, Arburg 1500T 2500-400/400/290 3K injection molding machine (235) Number: 235 Kodpfx Anow Hx Uyswedn Availability: in stock Year of production: 2009 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 35, 40 Closing force [kN]: 2500 Plate size [mm]: 1500 Working hours [h]: 3645 Weight [kg]: 11200