Used Artech-Biesse Single for sale (7,939)

Condition: used, Year of construction: 2014, machine/vehicle number: 33041, functionality: fully functional, power: 4.5 kW (6.12 HP), travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 90 mm, Equipment: CE marking, The machine has been regularly maintained and is in excellent working condition. Linear guides and ball screws are in excellent condition without any play. Input and output tables are fully functional. The transport clamps operate powerfully and in sync. The drilling system is equipped with 82 spindles. Both the upper and lower milling units use ISO 30 tool holders. The motor bearings are in good condition and run at 24,000 rpm. The machine is operated via the BiesseWorks interface. The electrical components inside the control cabinet are clean and dust-free. Laodpsy Sfi Isfx Aiijb

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, X working area: 3200 mm Y working area: 1200 mm Electrospindle Vertical drilling heads: 10 Horizontal drilling heads X: 4 Horizontal drilling heads Y: 2 Grooving saw blade in X direction 16-position tool changer Worktable with 6 beams Software: Biesse Bsolid PICCHIO 2200 vacuum pumps, 90 m3/h Safety mats Lodpfx Asyv Avmjiieab Protective nets

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, power: 67 kW (91.09 HP), input voltage: 400 V, input frequency: 50 Hz, workpiece length (max.): 3,100 mm, workpiece width (max.): 2,205 mm, workpiece height (max.): 170 mm, Equipment: documentation/manual, ROVER A FT 2231 Lsdpfxjyzxyre Aiijab

Condition: used, machine/vehicle number: 008483, Type of edging: Thin edge, Thick edge Lasdpfx Aijyxmx Rsiob Gluing System: EVA Hotmelt Corner Rounding Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Operating Units: 11 nr

Condition: used, machine/vehicle number: 007687, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Lsdpfx Ajwuz Npeiijab Operating Units: 7 nr

Condition: used, machine/vehicle number: 007645, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Ledpfx Aiowuz Nijioab Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 007087, X axis working area: 4300 mm Y axis working area: 2200 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 40 Total number of tool changer positions: 30 Laedsy Nkrvopfx Aiiob

Condition: used, machine/vehicle number: 007913, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Lsdpfx Aewkf Dvjiisab Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008112, X axis working area: 3390 mm Y axis working area: 1535 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Total number of drilling spindles: 21 Lajdpfx Aijw Idgvjiob Total number of tool changer positions: 14

Condition: used, machine/vehicle number: 007685, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3200 mm Ledpfxey Nkqfj Aiisab Operating Units Right Side: 15 nr Operating Units Left Side: 15 nr

Condition: used, machine/vehicle number: 007641, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1200 mm Lsdewuz R Hspfx Aiieab Operating Units Right Side: 8 nr Operating Units Left Side: 9 nr

Condition: used, machine/vehicle number: 008370, X axis working area: 5055 mm Y axis working area: 1930 mm Working Table: Pod and Rail Laodpfsx A Tk Sjx Aiieb Main Electrospindle power: 19 KW Number of controlled axes: 5 axes Maximum edge height: 60 mm Total number of drilling spindles: 28 Total number of tool changer positions: 31

Condition: used, machine/vehicle number: 005062, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Lsdpoybawdsfx Aiisab

Condition: used, machine/vehicle number: 008359, X axis working area: 2500 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Total number of drilling spindles: 16 Total number of tool changer positions: 22 Ljdpfxox Swcao Aiisab

Condition: ready for operation (used), Year of construction: 2002, number of axes: 3, total width: 1,500 mm, overall weight: 710 kg, product length (max.): 3,390 mm, This 3-axis BIESSE Rover 24S was manufactured in 2002. It features a length of 3390 mm and an overall width of 1500 mm, with a conveyor speed ranging from 28 to 140 m/min. The machine has a weight of 710 kg and is equipped with a powerful 1.1 kW motor. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Rover 24S machine we have for sale. Contact us for further details. • Overall width: 1500 mm Lajdsy E Nydopfx Aiisb • Conveyor height: 890 + 940 mm • Conveyor speed: 28–140 m/min • Conveyor drive motor: 0.75 kW • Exhaust fan duty: 5,500 m³/h • Motor: 1.1 kW • Minimum working length: 700 mm • Compressed air connection: 1/2" • Compressed air consumption: tab. 1 • Electric power supply cable section: 4 x 1.5

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. Lsdpfxey Ehrxe Aiioab bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Ljdpfxjwlbxls Aiioab Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Working area X: 6,400 mm Working area Y: 1,500 mm Number of milling spindles: 1 Lajdswlcqvepfx Aiijb Main motor: 13 kW Maximum rotation speed: 24,000 rpm Tool clamping system: HSK-F63 Tool change positions: 8 Vertical drilling heads: 20 Horizontal drilling units X: 4 Horizontal drilling units Y: 4 2 vacuum pumps, each 360 m³/h Nesting Remote control Software: BIESSE WORKS Overall dimensions: 11,004 × 5,334 mm Weight: 4,900 kg

Condition: used, machine/vehicle number: 008125, Type of edging: Thin edge, Thick edge Laedpfx Aew Tivmeiisb Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Operating Units: 9 nr

Condition: good (used), Revent Single Rack Oven Ljdsyw T D Djpfx Aiisab Rotary Rack Oven Complete with one mobile oven rack In good working condition

Condition: good (used), Code: 0231 Brand: BIESSE Model: SKIPPER 100 - CE Standard CNC working center for furniture, kitchens, custom furniture, panels and various - CE Standard - Year 2006 Technical data: 3-axis (x-y-z) CNC working center - swan neck machine Movable panel, fixed working head - panel horizontally Integral protection of the working head and with emergency front carpets Numerical control with biesseworks software Infeed table (with motorized belts) left N. 2 panel fixing clamps (for their introduction into the working area) Outfeed table (with motorized belts) right Useful (maximum) working area (x - y - z) mm 3000 x 1000 x 60 Dimensions (minimum) workpieces that can be machined (x - y - z) mm 90 x 70 x 8 Dimensions (maximum) workpieces that can be machined (x - y - z) mm 3000 x 1000 x 60 (for panels longer than mm 2000, the minimum thickness becomes mm 13) Total installed power (kw) 20 (approx.) Lower working units: Lajdpfx Aiexqntdsiob N. 1 vertical electro spindle hsk d-50 (power Hp 4,8) with inverter N. 1 circular saw unit (on x-axis) dia. mm 150 (power Hp 2,3) with inverter N. 29 vertical drilling spindles N. 10 horizontal drilling spindles (8 in x-axis + 2 in y-axis) Upper working units: N. 1 vertical electro spindle hsk d-50(power Hp 4,8) with inverter N. 1 circular saw unit (on x-axis) dia. mm 150 (power Hp 2,3) with inverter N. 29 vertical drilling spindles N. 10 horizontal drilling spindles (8 in x-axis + 2 in y-axis) Transfer for panel loading and unloading: structure made of aluminum profiles, belt-driven table for panel translation/lifting bar BiesseWorks machining programming system Compressed air 7/8 bar Total power Kw 20 Overall dimensions - (see attachment) Machine weight kg 2700

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Work area X: 3600 mm Work area Y: 1250 mm Maximum workpiece thickness: 70 mm 3-axis electro-spindle ISO30 tool holders Laodpfx Aiey Hp Sceiob Vertical drilling heads: 13 Horizontal drilling heads X: 4 Vertical drilling heads Y: 2 Work table: Nesting FT 18-position tool changer Control system: PC Control Safety mats Protective netting Includes ISO30 collets and a Busch vacuum pump.

Condition: good (used), Machining center composed of: 2 drilling heads (one upper and one lower) for vertical and horizontal drilling 1 upper milling unit and 1 lower milling unit 1 upper saw unit and 1 lower saw unit STANDARD CONFIGURATION Ljdpfxsy E Ir Ej Aiijab

Year of construction: 2014, condition: ready for operation (used), spindle motor power: 4,000 W, spindle speed (max.): 15,000 rpm, number of axes: 3, This 3-axis BIESSE Skipper v31 was manufactured in 2014. It features a powerful 12 kW machine with a main spindle speed of 15,000 rpm. The machine is equipped with 16 drilling spindles (6 horizontal and 10 vertical) and a grooving blade, allowing for versatile drilling and milling capabilities. If you are looking to get high-quality wood boring capabilities, consider the BIESSE Skipper v31 machine we have for sale. Contact us for further details. • Quantity available: 2 units • Machining type: Drilling and milling Ledoy Ddn Tspfx Aiijab • Drilling spindles: 16 total (10 vertical, 6 horizontal) + grooving blade • Maximum workpiece size: X 2500 mm, Y 900 mm • Axis travel speeds: X 25 m/min, Y 50 m/min, Z 25 m/min • Electrical/power: 12 kW installed power; 415 VAC; 21 A

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1000007687, feed length X-axis: 3,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 60 mm, total width: 4,400 mm, total length: 7,290 mm, power: 20 kW (27.19 HP), rotational speed (max.): 18,000 rpm, Fully working.Still in use, Lsdpfox I A A Rsx Aiieab