Used Bahco Hydraulic Pulling Cylinder 50 T for sale (93,233)

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Ideal for building demolition shears, scrap shears, and branch shears -Connections via the piston rod -Piston diameter: approx. 150 mm -Piston rod diameter: 80 mm -Stroke: approx. 420 mm -Total length extended: 1800 mm -Ideal for machines where the piston rod needs to be protected. Dsdpfx Aqob A Hufjcech -Quantity: 6 pieces available -Price: per piece

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 400 t, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Dcodpfx Aqjph Uk Noceh Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: new, Year of construction: 2021, pressing force: 17 t, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: Hydraulic 17 T single column press Single column press with 17 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec. d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by knob ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Dedpfjgrki Ssx Aqcsch Forces Press force max. ( at 250 bar ) 170 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Dimensions Max. Opening width 250 mm Stroke and min. opening 100 mm Table height above floor 850 mm Height above floor (headroom) approx. 2200 mm Hall height min. 2.500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of press without operating materials approx. 1 to Speeds Fast closing with 10 mmSec. Press speed 10 - 0 mmSec Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pcs. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 100 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage hydraulic pumps 24 24 V DC V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW Design The press is designed as an oil-hydraulic single-column press. The hydraulic system and the tank are located on the top and inside of the press, respectively. Hydraulic unit The hydraulic system is mounted on the top of the press. Safety devices For the scope of delivery described, the press complies with the valid safety regulations according to UVV, as well as with the standards and directives valid for the EU, in each case in the latest version. Electrical system / control system The control cabinet with control, power and safety components is located on the right side of the press. The press is operated by a hand lever control.

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 20 t, Hydraulic 20 T single-column production press for the manufacture of lightweight concrete parts. Here are the technical data of the offered machine: If the press does not exactly meet your requirements, please click here to request an individual offer exactly according to your wishes: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly favourable prices! Dodpfxsia Nc To Aqcjch Technical data + information: a) Closing speed up to 10 mm/sec b) Opening speed up to 20 mm/sec c) Maximum open height 300 mm d) Pressing speed 4 - 10 mm/sec. ( adjustable via rotary control ) e) Die size 600x800 mm f) Ram size 950x600 mm g) Manual lubrication (via grease nipple) h) Pressure setting from 5 T to 20 ( adjustable via rotary control ) i) Travel 300 mm j) Installation, commissioning, instruction at extra charge Technical Data Press type C Press, hydraulic Thermal neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 200 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel on steel Max. 3 sec. Dimensions Max. Opening width 350/50 mm Stroke 300 mm Table height above floor, approx. 900 mm Height above floor (headroom) approx. 1900 mm Hall height min. 2,500 mm Parallel deviation at 20°C +/- 0.4 mm Deflection Determined at max. clamping force with 2/3 occupancy < = 0.6 mm/m Weight Total weight of the press without operating materials approx. 2.2 to Speeds Fast closing with 10 mm sec. Press speed 10-5 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of press cylinders 1 pc. Plus 1 ejector, 110 mm stroke, max. operating pressure 255 bar Pressing pressure build-up time 03. apr sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH/ASC approx. 6 L/min Oil volume approx. HLP 46 D 100 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage 24 V Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 4 kW (C-press, hydraulic press, hydraulic press, concrete press) Are you looking for a customised machine? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), the EC standards and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply in all points with the national Brazilian safety directive NR 12, which is based on these. Our great strength is the construction of special machines and press automation. We sell customised hydraulic presses, press brakes and impact shears at surprisingly favourable prices. For the hydraulics of the presses, we mainly use components from leading European manufacturers.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 06/2028, total length: 1,010 mm, total width: 630 mm, total height: 1,220 mm, input frequency: 50 Hz, type of input current: three-phase, power: 4 kW (5.44 HP), electrical fuse: 16 A, Spiral kneader Model: SP 50 T Kneading machine with sophisticated and robust technology! for the best kneading results! Digital easy touch control with rewind key Dough machine with 3 timers 1 mixed speed and 2 forward speeds for min / max. 6 - 50 kg of dough Flour dust hood with steamer Stainless steel kettle and spiral Kettle left and right barrel Mobile machine with 4 brakes DGUV V3 tested Connection 400V, 4 kW, 16A-CEE plug Dimensions: 630 x 1010 x 1220 / 1600mm, WxDxH With a 24 month warranty Dsdshfha Dopfx Aqcech Visit our large bakery machines warehouse!

Condition: good (used), Year of construction: 2008, functionality: fully functional, Hurco VMX 50 T, Year of manufacture 2008, Winmax control system, 40-position tool changer, High-pressure coolant system, Spindle speed up to 12,000 rpm, Chip conveyor, Simulation graphics, Pocket with islands, Dcodoy T Iwqjpfx Aqcsh Synchronous tapping, Helix, 3D option, NC/dialog mix, Surface selection, Tool change optimization, Tool and material database, X-axis bearing likely defective.

Condition: used, Year of construction: 1998, x-travel 500 mm y-travel 400 mm z-travel 400 mm Control TNC 426M Heidenhain turning speed range - main spindle 20 - 9.000 min/-1 power capacity - main spindel 9 / 13 kW max. Torque 57 / 82 Nm tool taper ISO 40 DIN 69871 table diameter 700 x 500 mm swivellable B: 105° (-10°/+95°) man. rotatable 360° man. max. table load 200 kg number of T-slots 7 T-slot - distance 63 mm T-slot - width 14H7 mm center hole 30H7 mm number of toolpositions 16 pos. tool taper ISO 40 DIN 69871 max. tool length 290 mm max. tool weight 6,0 kg max. total weight 50 kg feed speeds max. 10.000 mm/min rapid traverse 12 m/min input unit 0,01 mm total power requirement 17 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 4,0 x 4,0 x 2,5 m CNC - MachiningCenter Univresal DECKEL MAHO - DMU 50 T Dodpfjxmag Ujx Aqcech - 5 Axis (3 + 2) - Swivel-Rotary-Table incl. Angle-Specification (manual Axis B+C via Handwheel)

Condition: used, Year of construction: 1975, filling amount ca. 250 l basket dimensions 560 x 260 x 40 mm dimensions of the machine ca. 1,25 x 0,70 x 1,20 m SYSTEM CHEMIE - T 50 Dive Wash Unit - Immersion Tank Dimensions: 585 x 385 x 500 mm - Draining Area Dimensions: 400 x 375 mm Djdpfx Asym D Ahsqcjch - 2x Storage Rack Dimensions: 400 x 350 x 210 mm

Condition: used, Double-acting hydraulic cylinder, MAE, suitable for MAE hydraulic press, type HY-DSF 160. Flange cylinder, ideal for workshop press. Machine year of manufacture: 1970 Cylinder No.: 6017 Cylinder stroke: approx. 600 mm Djdpfxey Tptaj Aqcjch Operating pressure: 320 bar Piston rod: Ø 220 mm Piston diameter: Ø 250 mm Cylinder pressing force at 325 bar: approx. 160 tons Cylinder diameter: 255 / 370 / 390 mm Overall length with piston rod retracted: approx. 1350 mm Piston rod extension: 70 mm - Hydraulic connection thread G 1 1/2" - Flange connection on the cylinder base, inner diameter approx. 118 mm, outer diameter 165 mm, 6x M36 threaded holes, pitch circle 215 mm - Thread in the piston rod M20, pitch circle 160 mm - Mounting nut on the cylinder tube, outer diameter 418 mm Weight: 915 kg The hydraulic cylinder is used and comes from a warehouse clearance.

Condition: excellent (used), I am offering professional HURST hydraulic spreaders – Jaws of Life – used in technical rescue operations (fire departments, emergency services). Equipment from the renowned brand HURST Rescue Systems (USA) – a market leader in hydraulic rescue tools. Condition: - Fully operational and tested equipment. - Completely functional – ready for immediate use. - Displays normal signs of use (scuffs, marks – visible in the photos), which do not affect performance. Details: Manufacturer: HURST Rescue Systems Dsdpfx Aqsyxta Iocsch Type: Hydraulic spreaders Application: Technical rescue, fire brigade Hydraulic quick couplings included Set includes: 2x HURST hydraulic spreaders Hydraulic hoses as shown in photos Applications: - Fire brigade (volunteer/professional) - Road rescue operations - Hydraulic power systems - Workshop and service operations. PRICE LISTED IS FOR 1 PIECE.

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Dsdpfeu D Tz Uox Aqcsch Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 pieces available, price per piece

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Dodpfx Aqedzp Trjcech Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: like new (used), 15 running meters tire rack Nedcon New & used, see pictures. Height 3 m Depth 50 cm Beam length 3.7 m Beam with load/shelf 1000 kg Frame blue Beam painted blue Dcsdpfx Aqokkch Eocoh Negotiable price: € 1.150,-- net ex stock Offer consists of: + 4 pcs. frames pre-assembled, depth 50 cm, height 3 m + 18 pcs. beams, length 3,7 m, 1000 kg load/slot + 36 pcs. suspension locks + 16 pcs. concrete anchors Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: new, functionality: fully functional, Year of construction: 2026, Equipment: hydraulics, low noise, TEC-POINT Hydraulic Breaker KT53S in soundproofed design is the powerful solution for professional demolition, concrete breaking, foundation work, civil engineering, sewer construction, landscaping, as well as municipal and inner-city construction sites. Thanks to the fully enclosed, soundproofed housing, the breaker operates with reduced noise levels while also protecting the internal components from external influences on the job site. This makes the KT53S particularly suitable for use in residential areas, noise-sensitive environments, and anywhere robust performance is required with reduced noise emissions. The interchangeable upper swivel head ensures flexible applications, while the large overall length offers extensive reach and efficient energy transfer when breaking concrete, stone, foundations, and similar materials. ✅ Complete set for mini and compact excavators from 2.0 to 4.5 tons 📍 Immediately available from stock in Rheda-Wiedenbrück 🚚 Pick-up on site or shipping by freight carrier Europe-wide possible 💶 Price: €1,799 net plus VAT – negotiable 🧾 Invoice with indicated VAT will be issued 🛠️ Complete set including 2 pointed chisels, nitrogen bottle, hydraulic hose set, service case – ready for immediate use! Dcjdpfx Aqoy N Sfdscsh ⚙️ Technical Data 🔹 Model: KT53S Silenced Type 🔹 Version: soundproofed model 🔹 Suitable excavator weight: 2.0 to 4.5 tons 🔹 Weight: 165 kg 🔹 Operating pressure: 90–120 kg/cm² / approx. 88–118 bar 🔹 Required oil flow: 25–55 l/min 🔹 Impact frequency: 600–1250 blows per minute 🔩 Mounting Dimensions / Compatibility 🔹 Mount width: 110 mm 🔹 Pin center distance: 120 mm 🔹 Pin / bore diameter: Ø 35 mm 🔹 Chisel diameter: 53 mm We are happy to check the suitable attachment dimensions for your excavator model and coordinate them upon request. 📍 Location TEC-POINT GmbH Kupferstraße 10 33378 Rheda-Wiedenbrück Germany 📞 Contact & Inspection Feel free to contact us today – we will advise you personally and assist you in selecting the right hydraulic breaker for your carrier machine. You are warmly invited to visit our warehouse in Rheda-Wiedenbrück. On site, you can inspect, compare, and, by arrangement, test our machines and attachments. We look forward to your inquiry!

Condition: new, functionality: fully functional, color: orange, overall weight: 72 kg, Year of construction: 2026, Equipment: hydraulics, The TEC-POINT Hydraulic Breaker KT40 in Top Type-S configuration is the professional solution for demolition, concrete breaking, foundation work, civil engineering, sewer construction, landscaping, and compact job site applications with mini and compact excavators. Thanks to its robust construction, compact size, and reliable impact performance, the KT40 is ideally suited for daily use on construction sites. The top-mounted design ensures efficient power transmission and excellent operating reach when breaking concrete, stone, foundations, and similar materials. ✅ Complete set for mini and compact excavators from 0.8 to 2.5 tons 📍 Available immediately from stock in Rheda-Wiedenbrück 🚚 Local pickup or Europe-wide shipping via freight forwarding available 💶 Price: €1,200 net plus statutory VAT – negotiable 🧾 Invoice with VAT shown will be issued 🛠️ Complete set including 2 pointed chisels, nitrogen bottle, hydraulic hose set, service case – ready for immediate use! ⚙️ Technical Data 🔹 Model: KT40 Top Mount S 🔹 Configuration: Top Type-S / straight design 🔹 Suitable for carrier weight: 0.8 to 2.5 tons 🔹 Weight: 72 kg 🔹 Operating pressure: 90–120 kg/cm² / approx. 88–118 bar 🔹 Required oil flow: 15–30 l/min 🔹 Impact frequency: 800–1400 blows per minute 🔩 Mounting dimensions / Compatibility 🔹 Mounting width: 92 mm 🔹 Pin center distance: 90 mm 🔹 Pins/Bore: Ø 25 mm 🔹 Chisel diameter: 40 mm We would be pleased to check the appropriate mounting for your excavator model and coordinate it individually upon request. 📍 Location TEC-POINT GmbH Kupferstraße 10 33378 Rheda-Wiedenbrück Dsdey N R Azopfx Aqcoch Germany 📞 Contact & Inspection Feel free to contact us today – we will advise you personally and help you choose the suitable hydraulic breaker for your carrier unit. We warmly invite you to visit our warehouse in Rheda-Wiedenbrück. On site, you may view, compare, and, by arrangement, test our machines and attachments. We look forward to your inquiry!

Condition: new, Year of construction: 2026, functionality: fully functional, D-T50 – CNC Turret Punch Press | Heavy Duty CNC Turret Punch Press – D-T50 | 500 kN | Sheet size 2500×1250 mm Heavy-duty CNC turret punching machine engineered for high-volume sheet metal fabrication. With a punching force of 500 kN and a stroke rate of 160 hits per minute, the D-T50 guarantees excellent productivity and precision. Key Specifications: • Capacity: 500 kN • Hit Rate: 160 strokes/min • Sheet Size: 2500 × 1250 mm • Max. Sheet Size (with single reposition): 5000 × 1250 mm • Max. Sheet Thickness: ≤ 6.35 mm • Accuracy: ± 0.1 mm • Feeding Speed: 80 m/min • Turret Stations: 16 / 24 / 32 • Air Pressure: 0.65 MPa • Machine Dimensions: 5000 × 5200 × 2300 mm ✅ High hit rate – ideal for mass production ✅ Extended sheet capacity with repositioning up to 5000 mm ✅ CE certified | Warranty included | Spare parts & service available Dedey Swn Nspfx Aqcoch D-Y80 – CNC Turret Punch Press | Heavy Duty | Thick Plate CNC Turret Punch Press – D-Y80 | 800 kN | Thick Plate up to 15 mm Heavy-duty CNC turret punching machine designed for processing thick sheet metal. The D-Y80 accommodates material up to 15 mm thick, delivering 800 kN punching force — perfect for structural and heavy-gauge tasks. Key Specifications: • Capacity: 800 kN • Hit Rate: 100 strokes/min • Sheet Size: 2000 × 800 mm • Max. Sheet Thickness: 6–15 mm • Accuracy: ± 0.15 mm • Feeding Speed: 60 m/min • Turret Stations: 6–12 • Air Pressure: 0.65 MPa • Machine Dimensions: 4100 × 4000 × 2400 mm ✅ Exceptional punching force – specialist for heavy-gauge sheet metal ✅ Robust design for demanding industrial applications ✅ CE certified | Warranty included | Spare parts & service available

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 80 mm -Piston rod: Ø 36 mm -Stroke: 100 mm -universally applicable: Dcodpfx Asd Erv Neqceh -Number: 1x available -Price: per piece -Dimensions: 415/120/H110 mm -Weight: 14 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 137,000 mm, shelf height: 5,000 mm, number of shelf rows: 10, clear span: 3,300 mm, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, shelf length: 137,000 mm, support length: 3,300 mm, 2 single-row pallet racks + 4 double-row pallet racks, each 13.7 m long, 5 m high, 1.1 m deep. Each with 4 bays, 3.3 m wide, and 3 beam levels per bay. Shelf load capacity: 3,250 kg per level. Scope of delivery: - 50 frames (RM5011 - RAL5019), including base plates, shims, and fastening materials - 40 spacers/connectors for double rows (ZAbh20) - 200 floor anchors (ZZBA1210) - 240 individual beams (T33135 - RAL2008) - 10 impact guards/collision protectors (ZRS40901) - 10 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Dcedpfsyzl T Eex Aqcjh Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction/installation site - Unloading from truck to be carried out by the buyer using their own forklift - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands); deliveries to EU countries are subject to individual agreement.

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 9,000 rpm, spindle speed (min.): 20 rpm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, table width: 500 mm, table length: 700 mm, rotational speed (max.): 9,000 rpm, rotational speed (min.): 20 rpm, table load: 200 kg, overall weight: 3,500 kg, workpiece weight (max.): 6 kg, space requirement width: 2,300 mm, space requirement length: 2,300 mm, space requirement height: 2,000 mm, For sale: Deckel MAHO DMU 50 T. Year of manufacture: 2001. The machine is equipped with the popular and powerful Heidenhain MillPlus / 3D path control, workshop-serviced and immediately ready for operation. 3-axis base machine with manual swivel rotary table [3+2 axes]. Available from calendar week 21. Can be inspected under power at the location near Salzburg, Austria, immediately. Condition: Very good (low operating hours for its age) Incl. accessories. Dcedey Raf Uspfx Aqceh Machine weight: 3,500 kg

Condition: ready for operation (used), Hydraulic press, four-column press, Eitel 100T Manufacturer: EITEL Pressing force: 100 tons Overall dimensions: 1900x1100x3300mm Dedpfx Aqeuhl E Rocech Table size: 1050x800mm Stroke length: 400mm

Condition: like new (used), type: HZO 50/30/600/D/GL piston diameter: 50mm piston rod diameter: 30mm stroke: 600mm perm. pressure: 103 bar Dedpfx Aqsyxnwuococh

Condition: like new (used), functionality: fully functional, type: HZOS 100/60/1200/D/FU Dsdpfeyxqmlox Aqcech perm. pressure: 250 bar piston diameter: 100mm piston rod diameter: 60mm stroke: 1200mm

Condition: like new (used), functionality: fully functional, type: HZOS 160/100/1200/D piston diameter: 160mm piston rod diameter: 100mm stroke: 1200mm perm. Pressure: 250 bar Dcedpjyxqrbsfx Aqceh

Condition: used, functionality: fully functional, machine/vehicle number: 2482458, Year of construction: 2020, load capacity: 5,000 kg, lifting height: 4,700 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, power: 55.4 kW (75.32 HP), fork carriage width: 1,250 mm, fork length: 1,220 mm, fork width: 150 mm, fork thickness: 55 mm, turning radius (inner): 130 mm, turning radius (outer): 2,920 mm, front tire size: 300-15 19PR, rear tire size: 7.00-12 12PR, overall weight: 6,930 kg, total height: 2,390 mm, total length: 4,470 mm, total width: 1,490 mm, color: red, Equipment: cabin, pallet forks, Technical Specifications Year of manufacture: 2020 Engine: Diesel 55.4 kW Transmission type: W Max. load capacity: 5,000 kg Load center: 500 mm Tyres: 300-15 18PR / 7.00-12 12PR Fork dimensions (L x W): 1.22 m x 0.15 m x 0.055 m Overall dimensions (L x W x H): 4.47 m x 1.94 m x 2.39 m Weight: 6,930 kg Lift height: 4.70 m Displacement: 2.92 l Lifting speed with/without load: 0.43 m/s / 0.46 m/s Max. gradeability: 20% Turning radius: 2.92 m Speed at max. torque: 2,200 rpm Number of cylinders: 4 Travel speed with/without load: 13 km/h / 23 km/h Fully functional, general signs of use, UVV Dsdpfxeyqziae Aqcoch

Condition: used, Hydraulic power chuck cylinder for actuating power chucks Suitable for Gildemeister GDM 42 Through-hole cylinder RÖHM SZS 45/92 559 Djdpfx Aqsy E T A Ascsch Ident no.: 414096 Serial no.: 7069 Operating pressure: max. 40 bar Speed: max. 7000 rpm Piston diameter: 125 mm Piston rod diameter: 62/53 mm Piston stroke: 25 mm Inner diameter of cylinder tube: 45 mm Hydraulic power chuck cylinder for opening and closing automatic power chucks. For hydraulic operation of power chucks or collet chucks. Through-hole cylinder for hydraulic actuation of power or collet chucks with a through-bore.