Used Baler Roller Compactor for sale (8,620)

Condition: used, Year of construction: 2006, functionality: fully functional, roll diameter: 50 mm, roll width: 600 mm, roll pitch: 75 mm, total width: 690 mm, total height: 290 mm, total length: 3,000 mm, conveying length: 3,000 mm, construction width: 690 mm, construction height: 290 mm, Item no.: 1000003743 Technical Data: Manufacturer: TGW Year of construction: 2006 Overall dimensions: 3,000 x 690 x 290 mm (LxWxH) Conveying width: 600 mm Roller type: Steel rollers Roller pitch: 75 mm Roller diameter: 50 mm Gear motor: included Speed: 0,5 m/s Condition: Used / fully functional Function test: OK Itedpfxom Twtxe Adkog OPTIONAL: Supports (height freely selectable), side guides, edge protection, emergency stop button, frequency converter

Condition: good (used), Year of construction: 2006, functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 75 mm, total width: 690 mm, total height: 290 mm, total length: 6,000 mm, conveying length: 6,000 mm, construction width: 690 mm, construction height: 290 mm, Item no.: 1000003743 (220853.2.1) Roller conveyor, powered - 6,000 mm Technical data: Manufacturer: TGW Year of construction: 2006 Overall dimensions: 6,000 x 690 x 290 mm (LxWxH) Conveyor width: 600 mm Roller type: Steel rollers Roller pitch: 75 mm Roller diameter: 50 mm Gear motor: included Speed: 0,5 m/s Itodpfx Adeiuzh Sekeg Condition: Used / fully functional Function test: OK OPTIONAL: Supports (height freely selectable), Side guides, edge protection, emergency stop button, frequency converter

Condition: used, functionality: fully functional, roll diameter: 50 mm, roll width: 600 mm, roll pitch: 90 mm, total width: 656 mm, total height: 80 mm, total length: 2,970 mm, conveying length: 2,970 mm, construction width: 656 mm, construction height: 80 mm, TAF item number: 1000003848 Manufacturer: TAF Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 2,970 x 656 x 80 Width incl. side panel in mm: 656 Itedpfxjxq Egbj Adksg Side height in mm: 70 Conveyor length in mm: 2,820 Conveyor width in mm: 600 Substructure: none Support roller axle type: spring axle Support roller diameter in mm: 50 Support rollers per axle: 1 support roller Material: plastic Roller pitch in mm: 90 Drive: gravity Net weight in kg: 29 Special features: - Condition: used, fully functional Function test: OK

Condition: used, functionality: fully functional, total length: 2,500 mm, total width: 580 mm, total height: 110 mm, conveying length: 2,500 mm, roll diameter: 14 mm, roll width: 500 mm, TAF article number: 1000003796 Manufacturer: unknown Year of construction: unknown Overall dimensions: approx. 2,500 x 580 x 110 mm (LxWxH) Cheek width: 40 mm Iodpjuq Hxfsfx Adkotg Cheek height: 100 mm Conveyor length: 2,500 mm Conveyor width: 500 mm Roller type: Steel Rollers per axle: 5 pieces Roller pitch: 50 mm Roller diameter: 14 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: used, functionality: fully functional, roll diameter: 50 mm, total width: 1,300 mm, total height: 85 mm, total length: 2,930 mm, conveying length: 2,930 mm, TAF article number: 1000004158 (220864) Manufacturer: unknown Year of manufacture: unknown Overall dimensions: approx. 2,930 x 1,300 x 85 mm (LxWxH) Cheek width: 1,300 mm Cheek height: 80 mm Conveyor length: 2,930 mm Conveyor width: 1,230 mm Iedpsv Hffgsfx Adkjtg Roller type: Plastic Rollers per axle: 1 piece, 2 axles per row Roller pitch: 55 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: excellent (used), functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 90 mm, total width: 710 mm, total height: 80 mm, total length: 2,970 mm, conveying length: 2,970 mm, construction width: 710 mm, construction height: 80 mm, TAF article number: 1000003814 Manufacturer: unknown Year of manufacture: unknown Overall dimensions: approx. 2,970 x 710 x 80 mm (LxWxH) Cheek width: 710 mm Cheek height: 70 mm Conveyor length: 2,970 mm Conveyor width: 630 mm Roller type: Plastic Iedpjpvkvusfx Adkotg Rollers per axle: 1 piece Roller pitch: 90 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 90 mm, total width: 555 mm, total height: 80 mm, total length: 1,450 mm, conveying length: 1,450 mm, construction width: 555 mm, construction height: 80 mm, empty load weight: 22 kg, TAF item number: 1000005918 Manufacturer: TAF Industriesysteme Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 1,450 x 555 x 80 Width incl. side panel in mm: 555 Side height in mm: 70 Conveyor length in mm: 1,450 Conveyor width in mm: 500 Conveyor height in mm: 80 Itodpfx Adsyddu Ejkeg Roller pitch in mm: 90 Substructure: without (optionally available) Support roller axle type: spring axle Support roller diameter in mm: 50 Support roller per axle: 1 Support roller material: plastic Drive: gravity Net weight in kg: 22 Condition: used / fully functional Function test: OK

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, total width: 606 mm, total height: 100 mm, total length: 720 mm, conveying length: 720 mm, TAF item number: 1000003740 Manufacturer: SSI Year of manufacture: unknown Itedpfx Ajxdcctodkeg Overall dimensions (LxWxH) in mm: 720 x 606 x 100 Width incl. side panel in mm: 606 Side panel height in mm: 95 Conveyor length in mm: 720 Conveyor width in mm: 500 Substructure: not available Support roller axle type: plugged, rigid axle Support roller diameter in mm: 50 Support rollers per axle: 1 Support roller material: steel Drive: gravity Net weight in kg: Condition: used / fully functional Function test: OK

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Isdpfx Adjy R Npiekstg Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. Itedsy R Npcopfx Adkjg The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Isdpfx Adoy R Nnfekotg Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 595 mm, roll pitch: 120 mm, total width: 640 mm, total height: 90 mm, total length: 1,950 mm, conveying length: 1,950 mm, construction width: 790 mm, construction height: 110 mm, TAF article number: 1000003935 Type: Roller conveyor Manufacturer: unknown Year of manufacture: unknown Itjdpfjt Dpcgex Adksg Overall dimensions (LxWxH) in mm: approx. 1,950 x 640 x 85 Side width in mm: 20 Side height in mm: 70 Conveyor length in mm: 1,950 Conveyor width in mm: 595 Roller type: steel Rollers per axle: 1 piece Roller pitch in mm: 75 Roller diameter in mm: 50 Net weight in kg: 52 Drive: gravity Condition: used / fully functional Function test: OK

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, wheelbase: 4,400 mm, fuel: diesel, fuel tank capacity: 150 l, color: white, gearing type: mechanical, emission class: euro5, loading space volume: 8 m³, Year of construction: 2024, Equipment: ABS, AdBlue, air conditioning, electric window regulation, electronic stability program (ESP), power assisted steering, traction control, = Additional options and accessories = - Autoradio - CD - Power windows front - Reverse camera - Sun visor Itedpjy Rt T Eofx Adksg = Remarks = = Additional options and accessories = - Air horn - Leaf spring suspension - Passenger seat - Radio/cassette player = Remarks = Mercedes-Benz Accelo 815 4x2 Garbage Compactor The Mercedes-Benz Accelo 815 4x2 Garbage Compactor is a compact, efficient, and durable solution for urban waste collection. This vehicle combines excellent maneuverability with powerful performance, making it ideal for navigating narrow streets and busy urban areas. With an integrated waste compactor, it offers an environmentally friendly and cost-effective way to manage waste. Specifications: - Drive: 4x2, designed for urban applications with a small turning radius. - MAX. (GVW): 8 tons, suitable for light to medium-sized waste collection routes. - Wheelbase: Compact wheelbase for easy navigation through tight spaces. - Engine: 4.8-liter Euro-5 diesel engine with 150 hp (110 kW) and 580 Nm torque. Compactor body: - Capacity: Ranging from 6 m³ to 8 m³, suitable for smaller waste collection routes. - Compactor: Higher compression to process more waste in less space. - Loader: Equipped with a lifting mechanism suitable for waste containers from 120 to 1100 liters. - Controls: Operated via electric and hydraulic controls. - Safety: Overload sensor with locking systems for safe operation. Advantages: - Compact: Ideal for narrow streets, residential areas, and busy urban zones. - Reliability: The robust Mercedes-Benz engine offers a long service life. - Ease of use: Ergonomic controls and easy maintenance access make this vehicle practical and time-efficient. Applications: - The Mercedes-Benz Accelo 815 Garbage Compactor is perfect for: - Urban waste collection in residential neighborhoods and commercial zones. - Waste removal at locations with limited access or narrow streets. - Efficient transport and compression of waste to processing facilities. By choosing the Mercedes-Benz Accelo 815 4x2 Garbage Compactor, you opt for a sustainable, reliable, and efficient waste management solution. This vehicle combines German quality, user-friendliness, and innovative technology to make your waste collection easier and more cost-effective. Thanks to its compact design, the Accelo 815 can easily operate in historic city centers and narrow alleys where larger vehicles cannot reach, making it a favorite among urban waste management companies. = More information = Transmission: Eaton FSO-4505-A, Manual gearbox Cab: day Field of application: Recycling Make of bodywork: Damaeq Compact 06 General condition: very good Technical condition: very good Visual appearance: very good Damages: none = More information = Year of manufacture: 2024 Number of cylinders: 4 Engine capacity: 4.200 cc GVW: 8.000 kg Selling price: € 74.900, US$ 88.090 Body model: Compact 06

Condition: excellent (used), power: 59 kW (80.22 HP), fuel type: diesel, color: white, first registration: 04/2005, Year of construction: 2005, operating hours: 3,310 h, General information Model year: 2005 Serial number: CATCB434LCNH00390 Technical information Number of cylinders: 4 Engine capacity: 4.400 cc Drive: Wheel Empty weight: 7.500 kg Functional Working width: 150 cm Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request Itedpfx Adsyzz E Rskjg Other information Track width: 1500 mm Additional information Please contact Ernst van Hek for more information

Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Iodot E Nw Tjpfx Adkjtg Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions

Condition: used, Year of construction: 2003, total length: 3,000 mm, total height: 1,700 mm, total width: 1,000 mm, Colour: White Empty weight: 1.000 kg Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30058 B - Max. working width [mm]: 1320 - Min. throughput height [mm]: 3 - Max. throughput height [mm]: 100 - Number of rolls [pcs]: 2 Itodpfx Aexwuwvjdksg - Transport dimensions: 3000mm x 1000mm x 1700mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Colour: Grey Empty weight: 1.250 kg Price: On request - Year: 2005 Itodpfxsym Uxts Adkeg - Documentation available: No - CE certificate present: No - Serial number: 307 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Colour: Grey Empty weight: 1.250 kg Price: On request - Year: 2005 - Documentation available: No Isdpsyrtcujfx Adketg - CE marking present: Yes - CE certificate present: No - Serial number: 308 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, functionality: fully functional, power: 3.5 kW (4.76 HP), fuel type: gasoline, color: yellow, operation weight: 92 kg, Year of construction: 2026, Equipment: UVV, Bomag BR 95 Vibratory Plate NEW Bomag BR 95 Vibratory Plate – NEW | 15 kN Centrifugal Force | 450 mm Working Width | Honda GX160 Petrol Engine Item Number: 63000021 Technical Data: Manufacturer: Bomag Model: BR 95 Condition: NEW Operating Weight: 92 kg Frequency: 90 Hz Centrifugal Force: 15 kN Working Width: 450 mm Engine: Honda Petrol Engine GX160 Iodpfx Adjy R Azfskstg Engine Output: 3.5 kW Fuel: Petrol Starting System: Recoil Start Compaction Class: Light Compaction Special Feature: As compact as a rammer, more maneuverable than a reversible plate – ideal for fiber optic construction Highlights & Features: - Compact & agile vibratory plate – ideal for confined jobsite areas - Perfectly suited for fiber optic installations & narrow trenches - Robust Honda petrol engine – reliable & low-maintenance - 450 mm working width – precise & efficient - Ergonomic guide handle – low vibration & comfortable - Made by Bomag – proven quality & immediately available Applications: ✓ Fiber optic & cable installation ✓ Paving & narrow trench work ✓ Landscaping & horticulture ✓ Foundation and trench compaction ✓ Construction companies & municipalities ✓ Construction sites with limited space Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Nationwide & international delivery on request Pricing: ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to error and prior sale. Prices exclude VAT Other models & widths available! ➡️ Vibratory plates from Bomag & Wacker Neuson – new & used machines Purchase Bomag Vibratory Plate | BR 95 NEW | Vibratory Plate 15 kN | Plate Compactor with Honda Engine | 450 mm Working Width | Compact Plate for Fiber Optic Construction | Bomag Compaction Technology | Professional Petrol Vibratory Plate Your reliable partner for compaction equipment: Claudio Macagnino Construction Machinery & Commercial Vehicle Trading GmbH ➡️ Request now & secure immediately available new machines! If required, we are happy to arrange a virtual machine inspection via video call.

Condition: excellent (used), functionality: fully functional, Gravity Conveyors Available – ISC RECYCLE We offer several refurbished, pre-owned gravity conveyors in excellent condition, available for immediate delivery. Ideal for: - Picking and preparation lines - Shipping areas - Facility extensions - Optimization of logistics flows Available models: TGW • Usable width: 420 mm • Length: 2800 mm • Pitch: 110 mm • Rollers: 50 mm • Steel rollers • Very good condition TGW Iodpfx Asy Ry N Hodkstg • Usable width: 420 mm • Length: 1800 mm • Pitch: 110 mm • Rollers: 50 mm • Steel rollers • Very good condition TGW • Usable width: 620 mm • Length: 2400 mm • Pitch: 50 mm • Rollers: 40 mm • PVC rollers • Very good condition Interroll • Usable width: 420 mm • Length: 2517 mm • Rollers: 50 mm • Steel rollers • Very good condition Knapp • Usable width: 660 mm • Length: 841 mm • Pitch: 100 mm • Rollers: 50 mm • PVC rollers • Very good condition Conveyors are supplied with standard supports and side guides included. Various accessories are also available: end stops, retractable flaps, etc. - Equipment available immediately - Price on request - Shipping possible ISC RECYCLE – Second-hand intralogistics solutions.

Condition: used, 1 cold/hot transfer and laminating press, manufactured by Bürkle, type CHKR 50/100, serial number 13531, year of manufacture 2014. It is capable of laminating 24 sheets of metal, each measuring 30x80 mm, at a maximum rate of 1,056 sheets per hour, with a maximum temperature of 220°C. The maximum laminating area is 310x520 mm. Includes a rotating table and a welding/tacking table, type WT-100. Also includes a hydraulic unit and an oil temperature control unit, manufactured by GWK, type Teco TT100.27.091, year of manufacture 2014. A cooling unit, manufactured by GWK, type weco 03A, has been removed. Itsdpfxsy S A Dio Adkeg

Condition: used, Two roller conveyors from Paul, suitable for the sub-table crosscut saw AO or similar machines. Roller conveyor length 1: 340 cm Roller conveyor length 2: 190 cm Itsdpfx Ajyarm Uedkeg Roller width: 56 cm

Condition: new, 130 kg height min. 670 mm height max. 920 mm length min. 450 mm length max. 1.300 mm Wheel width 480 mm weight ca. 36 kg Woodstar SRB 130 mobile scissor roller conveyor for flexible use in front of or behind processing machines, with a robust, height-adjustable steel frame and galvanized steel rollers. Multiple roller conveyors or roller tracks can be easily connected to each other using two hooks. Iodpsv Iztcofx Adkstg

Condition: used, length 2.000 mm width 500 mm height 970 mm Ijdpfst Iwx Rjx Adkstg Sturdy steel roller table for various applications.

Condition: used, - suitable for HARBS or similar, - d = 30 mm, - D = approx. 125 mm, - B = 50 mm, - keyway = 8 mm, Isdpfxjlf Ndas Adkjtg - 9 pieces per set.