Used Baumüller Bus 20-40/60-30-001 for sale (73,326)

Condition: new, functionality: fully functional, The Baumüller DS2-160MO54W-20-5-AO is a high-performance three-phase synchronous servomotor. These motors are designed for demanding industrial applications and feature high dynamic performance and water cooling (IP54 rating). Key specifications: • Series: DS2 Dcjdozr H N Hspfx Adron • Frame size: 160 • Rotor length: M (Medium) • Protection / Cooling: IP54, water cooling (W) • Winding and rated parameters: These motors achieve high power outputs (e.g., at a speed of 2000 rpm, the power output is in the range of tens of kilowatts).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 6,360 h, load capacity: 3,000 kg, lifting height: 5,380 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, construction height: 2,460 mm, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,200 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 250/60 - 12, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 5,491 kg, total height: 2,460 mm, total length: 2,500 mm, total width: 1,350 mm, fuel: electricity, Equipment: sideshift, STILL RX 60-30 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 5.380 mm Closed height: 2.460 mm Free lift: 1.800 mm Mast: Triplex (3F538) Fork length: 1.200 mm Fork carriage: FEM 3A Drive: Elektro 80V Battery: 80V 620Ah v. 2024 Charger: Dreiphasig 80V 100A not tested Tyres: Superelastik SE 250/60 - 12 (40%) / 18 x 7 - 8 (10%) Service weight: 5.491 kg Length: 2.500 mm Width: 1.350 mm Year of manufacture: 2015 Operating hours: 6.360 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Front windscreen, Pulse control ATTACHMENTS Sideshift Internal no.: 1309278 Dcedpfjz Aqhzsx Adrsn Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Basic - feed-in unit, feed-in module, converter, frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Baumüller, servo power unit BUS624-38/55-54-0-000 -Built-in control device: Controller BUS 6E -Type: BUS6-E-SM-0012-A011-0000 -Number: 3x devices available -Price: per piece -Dimensions: 300/165/H380 mm -Weight: 11.9 kg/piece Dedpfx Adjh R D Rpjrecn

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2020, total length: 13,520 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 6,920 mm, color: black, Year of construction: 2020, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Renders Brakes: drum brakes Dodpfxszz Sg No Adrscn Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 5.600 kg Carrying capacity: 37.400 kg GVW: 43.000 kg Functional Make of bodywork: Renders Euro 800 History Number of owners: 5 Condition General condition: good Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, controller model: Fanuc 32iTB iHMI, counter spindle speed (max.): 4,500 rpm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Distance between chucks: 625 mm Travel in X-axis: 310 mm Travel in Z-axis: 640 mm Travel in Y-axis: +70/-50 mm Travel in B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Maximum spindle speed: 3,500 rpm ASA 8" A2 Maximum counter-spindle speed: 4,500 rpm ASA 6" A2 Spindle bearing outer: 200 mm Spindle bearing inner: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool positions: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 42,654 h Total running hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine weight: 6,500 kg Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Dedpfoy Hk Niox Adrocn EQUIPMENT Gantry loader

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 184686, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 420 mm, displacement volume: 54 cm³, injection weight: 45 g, For sale is an injection moulding machine from the brand Arburg, model 420 C 1000-150/60. The machine is in excellent technical condition and has been very well maintained. The machine is offered without peripherals. The rotary table, material feed, temperature control units, and other accessories are not included. Technical data: Dcodpex E U Elefx Adron Year of manufacture: 2001 Clamping force: Clearance between tie bars: 420 x 420 mm Opening stroke: 500 mm Mould installation height: 250 mm Mould mounting plate: 570 x 570 mm Ejector stroke: 175 mm Screw diameter: 25 mm Theoretical shot volume: 54 cm³ Shot weight: 45 g/PS Transport and loading can be organised on request, at an additional cost, Europe-wide. All prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 7,585 h, load capacity: 2,000 kg, lifting height: 3,145 mm, fuel type: electric, mast type: simplex, construction height: 2,080 mm, fork carriage width: 980 mm, fork length: 1,600 mm, empty load weight: 3,702 kg, total length: 2,200 mm, drive type: Elektro, construction width: 1,150 mm, Electric 4-wheel forklift Load center: 500 Mast type: Standard Transmission: AC Technical condition: good Front tire type: Superelastic Front tire size: 2 x 200/50-10 Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire size: 2 x 15x6-8 Dcodpfx Adez If D Eoron Rear tire condition: 0 - 20% Battery voltage: 80V Battery capacity: 465Ah Battery year of manufacture: 2018 Double auxiliary hydraulics, fork positioner with side shift, cabin, heater, load guard, battery from 2018, 2 front work lights, 2 rear work lights.

Condition: used, Year of construction: 2001, operating hours: 38,850 h, clamping force: 25 kN, displacement volume: 20 cm³, injection pressure: 1,810 bar, overall weight: 1,900 kg, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Dedsyt R S Aepfx Adrscn

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, Equipment: ABS, Fermitung possible or SAF or Trex 2 lift axles 1x20 rear flush 2x20 1x30 rear flush 1x40 rear flush 1x45 rear flush Tool box Water tank LED lights KTL dipped ADR Can do anything Rental possible Dcjdpozfykksfx Adron Write to us with your wishes so that we can create an individual offer for you We sell tires and rims for trucks & trailers of the Brands: Fulda + Bridgestone + Petlas Sizes 315 / 55 ? 22.5 385 / 55 ? 22.5 385 / 65 ? 22.5 We finance, rent and lease If not in stock, delivery time 7 to 9 weeks We build the following trailers Container chassis all types Low loader Tipping troughs Tank trailers Tarpaulin trailers Silo trailers

Condition: good (used), functionality: fully functional, Pressing force: 40 tons Table surface area: 590 x 1000 mm Ram surface area: 590 x 1000 mm Stroke: 900 mm Table is extendable, ram plate is swiveling. Dcjdpfx Adjzxmgroren

Year of construction: 2003, condition: ready for operation (used), Six Arburg injection molding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions X/Y: 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, shot volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, shot volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Dcodpfx Adetyyn Horsn

Condition: good (used), Basic - feed-in unit, feed-in module, inverter, frequency converter, frequency transformer, drive inverter, controller, variable speed drive -Type: BUS622-15/22-54-0-000 -Input: DC 540 V/640 V -Output: 3AC 360V/425V 3x15A 0-300Hz -Number: 3x servo power units available -Price: per piece -Weight: 7.3 kg Dcsdpfx Adjd Ndi Horen

Condition: ready for operation (used), Year of construction: 2002, clamping force: 1,000 kN, screw diameter: 25 mm, Hydraulic injection moulding machine manufactured in 2002. This Arburg 420 C 1000-150/60 features a clamping force of 1,000 kN and a maximum mold height of 750 mm. It includes a screw diameter of 25/22 mm and a maximum injection volume of 54/30 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 420 C 1000-150/60 machine we have for sale. Contact us for further details. • Space between columns: 420 x 420 mm • Maximum mold height: 750 mm • Minimum mold height: 350 mm Djdpfxjz Dk Sge Adrocn • Screw diameter: 25/22 mm • Maximum injection volume: 54/30 cm3 • Maximum injection pressure: 2500/2340 Bar • Centering ring: 125 mm • Hot runners in the machine: 2 • Core puller: 1

Condition: ready for operation (used), Baumüller DSG 71-K servo motor / Reis robot SN:20329605, used, normal signs of use, 100% functional, scope of delivery as per photos Dedpfxotann Hs Adrscn

Condition: refurbished (used), functionality: fully functional, load capacity: 60 kg, controller manufacturer: Kuka, controller model: KRC2 / 4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: Djdpfjrqgduox Adrscn - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: used, Year of construction: 2016, functionality: fully functional, working width: 600 mm, warranty duration: 12 months, input voltage: 400 V, total height: 1,250 mm, total width: 1,000 mm, total length: 1,080 mm, noise level: 65 dB, We offer Parts Washer PC 60/130 T for sale Catalogue number: 1.626-704.0 Year of manufacture: 2016 All devices purchased from us come with a 12-month WARRANTY. Dsdpfx Adswzwuzsrocn Equipment features: • Operating hours counter • Stainless steel safety grate • Swivel castors, 2 lockable • Timer switch • Water level control Technical data: • Pressure: 1.5 / 0.15 bar / MPa • Pump performance: 4500 l/h • Connection power: 5.5 kW • Working diameter: 600 mm • Working height: 310 mm • Housing/frame: Stainless steel (1.4301) • CE certified • Heater power: 4.5 kW • Maximum temperature: 80°C • Adjustable wash time: 1 / 30 min • Load capacity: 130 kg • Sound pressure level: 65 dB(A) • Tank capacity: 100 l • Number of phases: 3 Ph • Frequency: 50 Hz • Voltage: 400 V • Dimensions (L x W x H): 1080 x 1000 x 1250 mm The washing process is fully automated, with easy operation ensured by a clear control panel and indicator lights displaying all working stages. The washing fluid temperature is maintained within the range of 35 to 80°C and is controlled via thermostat. Thanks to specially designed housing profiles (mechanical labyrinth seals), the PC 60/130 T operates without perishable rubber seals. Gas struts equipped with dampers guarantee effortless lid opening, while a ball valve enables easy draining of the cleaning fluid. The Kärcher parts washer operates in a closed-circuit system (using an electric pump) with a water-based cleaning solution instead of solvents, ensuring that the operator is not exposed to hazardous vapours.

Year of construction: 1999, condition: good (used), Product: BMF Year of production: 1999 Metal chain width: 200 mm Long-distance guide lanes: approx. 300 mm Chip outlet length 900/1250 mm Insertion length: approx. 1000 mm Dcedpfx Aohq Hz Hodren Insertion height 260 mm Insertion width 350 mm Total length: 3600 mm Transport height - ejection height: 800 mm Belt speed 26 mm / sec. = 1.6 m / min. Engine power: 0, 25 kW Mains connection was 400 volts, 50 Hz Enclosure size: H x W x D; 8700 x 900 x 1500 mm Weight 400 kg

Year of construction: 1984, condition: ready for operation (used), Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line illumination, with documentation. An on-site inspection is possible. Dcedpfx Adsy U Nqborsn

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Spindle speed max.: 3,500 rpm ASA 8" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Dcedjzdrzxjpfx Adrsn Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg EQUIPMENT Gantry loader

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,983 h, load capacity: 3,000 kg, lifting height: 4,760 mm, fuel type: electric, mast type: triplex, construction height: 2,270 mm, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,180 mm, tire condition: 30 %, front tire type: superelastic tires (black), front tire size: 23 x 10 - 12, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 5,589 kg, total height: 2,270 mm, total length: 2,500 mm, total width: 1,300 mm, fuel: electricity, Equipment: sideshift, STILL RX 60-30 – Electric 4-wheel forklift Dodpfxsz Apycj Adrjcn TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 4.760 mm Closed height: 2.270 mm Mast: Triplex (3F476) Fork length: 1.180 mm Fork carriage: 3 A Drive: Elektro 80V Battery: 80 V 620 AH v. 2011 Charger: Dreiphasig 80 V 125 A not tested Tyres: Superelastik SE 23 x 10 - 12 (30%) / 18 x 7 - 8 (40%) Service weight: 5.589 kg Length: 2.500 mm Width: 1.300 mm Year of manufacture: 2011 Operating hours: 5.983 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen, Heating, Pulse control ATTACHMENTS Sideshift Internal no.: 1309140 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: new, Year of construction: 2025, Description AORE PG6020: (12 Kw) We can deliver this type Laser cap. from ( 20 Kw) A Compact Design with Complete Protection (CE) table length 6050 mm table width 2050 mm laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 12 overall dimensions 14.000 x 3.400 x 2.400 mm weight of the machine ca. 13.450 kg Furnishing: - Max-photonics Laser source 12 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 12 Kw ) - normal steel 35 max 40 mm - stainless steel 30 mm - aluminium 16 mm - brass 12 mm - copper 10 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 6000 mm - Y-axis travel 2000 mm Dcodpfxsiyun Re Adrjn - Z-axis travel 375 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (23 second max for changing) - automatic change, max load on tables 2.400 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 6 part trolly under work table Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: used, first registration: 10/2004, color: other, Year of construction: 2004, Empty weight: 3.800 kg Dcsdpfx Aou Sq Injdren Axle 1: left 8 mm right 8 mm Axle 2: left 6 mm right 6 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 06/2001, color: other, Year of construction: 2001, Empty weight: 6.000 kg Axle 1: left 8 mm right 6 mm Dcsdpfszum T Dsx Adren Axle 2: left 7 mm right 7 mm Axle 3: left 8 mm right 12 mm We have the possibility to stack trailers!

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 1,360 h, machine/vehicle number: Z30N11-12432, load capacity: 227 kg, lifting height: 889 mm, platform length: 117 mm, platform width: 76 mm, overall weight: 6,598 kg, empty load weight: 6,598 kg, transport length: 366 mm, transport width: 119 mm, construction height: 224 mm, next inspection (TÜV): 03/2027, fuel type: electric, color: yellow, Equipment: UVV, We are selling an electrically powered articulated boom lift, a Genie Z-30/20N RJ, from our own rental fleet. It was manufactured in 2011. The unit was in active use in our rental operations until recently and is fully functional. The Z-30/20N RJ is a narrow, compact aerial work platform for indoor and outdoor use on prepared surfaces. Its narrow design allows it to pass through standard doors and be used in confined spaces. Because the rotating turret does not extend beyond the chassis, the platform can also work close to walls and obstacles. The articulated boom extends over machinery, shelves, or pipelines to reach the work area (lateral reach: 6.25 m). The rotating jib (RJ = Rotating Jib) facilitates precise positioning of the platform basket. The electric drive operates quietly and with zero emissions, making the platform suitable for use in halls, production facilities, and public buildings. Dodpfx Adoz I Dmxjrjcn The machine shows the typical signs of wear and tear expected for its age and rental usage. Inspection and a test drive are possible by appointment at our location.

Condition: used, functionality: unexamined, machine/vehicle number: 516027001604, Year of construction: 1998, operating hours: 12,578 h, Electric four-wheel forklift Still R 60-40, year of manufacture 1998, load capacity 4,000 kg. Factory number 516027001604, permissible total weight 10,610 kg, permissible rear axle load 3,500 kg, battery voltage 80 V. Operating hours 12,578 h. Equipment: driver protection roof, extended fork tines 2,000 mm. Dedoz A Un Nopfx Adrjcn Location: Homburg (Saar), Germany. Viewing by appointment only. Price on request, net plus VAT, ex location; dismantling and loading by arrangement. All information without guarantee.