Used Berg+Schmid Band Saw for sale (9,686)

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable Godpfod Iipxjx Afuskc - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

Condition: new, cutting diameter 220 mm saw band length 2455 mm table height 850 mm cutting width 230 mm cutting speed 25 - 80 m/min dimensions of saw-band 2455 x 27 x 0,9 mm 90 mm 90 mm 90 x 100 mm 150 Impact energy 150 Air consume per blow 150 x 210 220 mm stroke back stop 210 mm cross-slide 230 x 185 total power requirement 1,2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,2 x 0,6 x 1,7 m SPECIAL PRICE!!! -Miter cuts up to 60° left - Cutting speed 25 - 80m/min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed Gkjdpfsd Iip Tex Afuec -Manual mode

Condition: new, cutting diameter 220 mm saw band length 2455 mm table height 850 mm cutting width 230 mm cutting speed 35 + 70 m/min dimensions of saw-band 2455 x 27 x 0,9 mm 90 mm 90 mm 90 x 100 mm 150 Impact energy 150 Air consume per blow 150 x 210 220 mm stroke back stop 210 mm cross-slide 230 x 185 total power requirement 1,2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,2 x 0,6 x 1,7 m SPECIAL PRICE!!! -Miter cuts up to 60° left -Cutting speed 35 / 70 m / min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Gkodjd Iip Uepfx Afuec Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode Share of freight costs 85 EUR

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t Double miter metal band saw, GBS 250 Super AutoCut - Miter cuts up to 60° left and 45° right Gkodofgyh Tepfx Afuoc - Ball bearing turntable - Quick release vice - Massive, large material support - Automatic cooling

Condition: used, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180 x 100 mm Working height 925 mm saw blade turning speeds 17 - 70 U/min total power requirement 3,0 kW dimensions of the machine ca. 1,8 x 1,1 x 2,0 m Gkodpfxjzlkvds Afuoc Automatic cold circular saw - CNC control - Micro-lubrication system

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 35 / 70 m/min total power requirement 1,1/1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 34 / 74 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling Gedpfjd Iip Rox Afujkc Share of freight costs 120 EUR

Condition: new, 1000 mm 1000 mm 1200x1000 mm saw band length 11300 x 80 x 1,3 mm table height 790 mm band speed 14 - 60 m/min total power requirement 18 kW weight of the machine ca. 9,0 t dimensions 5,0 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. Gjdpfxet Eacge Afujkc • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, 460 mm 460 mm 460 x 460 mm saw band length 5450 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,2 t dimensions 2,675x 2,15 x 2,05 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is Gkjdpfxofg E Hve Afuoc entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: new, 330 mm 330 mm 400x330 mm saw band length 4570 x 34 x 1,1 mm table height 800 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 2,35 t dimensions 2,23 x 2,15 x 1,8 m Gkedpfsfb Nbgsx Afujc PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: used, total height: 3,270 mm, total length: 2,700 mm, total width: 2,250 mm, Colour: Green Weight: 4.000 kg - Serial number: U5624 - Saw direction: Horizontal - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1200 - Max. cutting to feed roller opening [mm]: 450 Gksdpfx Ajz Rz E Sjfusc - Max. cutting to stop opening [mm]: 330 - Max. cutting height [mm]: 320 - Table width [mm]: 1000 - Table length [mm]: 1150 - Max. band saw width [mm]: 130 - Feed roller type: Automatic hydraulic - Voltage [V]: 400 - Current consumption [A]: 46.5 - Fuse [A]: 63 - Power [kW]: 22.0 - Transport dimensions: 2700mm x 2250mm x 3270mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Cross-cut saw BERG & SCHMIDT Junior 275 -used- Underframe, carriage ----- Technical data ----- Godpfxsu R S I Hj Afuskc Cutting height: 60 mm, Voltage: 230 V

Condition: new, Year of construction: 2025, saw blade diameter 370 x 3,0 x 40 mm cutting diameter 120 mm stroke -- mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 180 x 100 mm capacity 45 degrees: round li. 120 / re. 105 mm capacity 45 degrees: square li. 100 / re. 100 mm Gkjdpfxovuz Rnj Afusc capacity 45 degrees: flat li. 130x100 / re . 130x10 mm capacity 60 degrees: round 110 mm capacity 60 degrees: square 90 mm capacity 60 degrees: flat 90 x 100 mm total power requirement 1,8 / 2,2 kW weight of the machine ca. 392 kg dimensions of the machine ca. 700 x 900 x 1800 mm Description: - Mitre left 60° + right 45° - Clamping block with double clamping arm - Robust prism guide for the saw head (adjustable dovetail guide) - Chip brush - Automatic cooling - Metal handle for high clamping force - Solid, strong cast iron table

Year of construction: 2007, condition: good (used), machine/vehicle number: 073759001, Offer 22489 Technical data: - Cutting range at 90°: - Round: 320 mm - Flat: 320 x 320 mm - Material feed system - Saw band dimensions: 5095 x 34 x 1.1 mm - Cutting speed: 10 to 120 m/min - Hydraulic lifting and lowering of the saw frame - Upper stroke limit of the saw frame - Cutting pressure, infinitely adjustable - Hydraulic material clamping device - Chip conveyor Gkedpeim Ildsfx Afusc - Coolant system - Chip removal conveyor: 2500 mm - Drive: 400 V / 4.0 kW - Space requirement: approx. W 2500 x H 1950 x D 2000 mm - Weight: approx. 2200 kg

Condition: new, capacity 90 degrees: round 500 mm capacity 90 degrees: square 420 mm 600x400 saw band length 5320x34x1,1 mm band speed 15 - 100 m/min table height 805 mm total power requirement 3,0 kW weight of the machine ca. 1,45 t dimensions of the machine ca. 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive Gjdpfxsupxups Afuekc • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of Gkodpfx Aefg E Hpofuec irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, 300 mm 300 mm 300 x 260 mm saw band length 3920 x 34 x 1,1 mm table height 780 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 1,65 t Gksdpfefb Nbfsx Afusc dimensions 2,0 x 2,05 x 1,7 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: used, Year of construction: 2011, total height: 2,850 mm, total length: 3,600 mm, total width: 1,500 mm, Colour: Grey Weight: 1.800 kg Resaw Centauro R1000 + RTF Machine number 19602 Year of construction 2011 Wheel diameter 1000mm Max cutting height 520mm Max cutting width 970mm Max saw blade width 110/80x1mm Max min saw blade length 6570/6380 Table size 1500x920mm Speed 570 Rpm 22kW (30hp) Required extraction capacity 2500 m³/h Working pressure 6-8 bar Dimensions 2255x2200x3000mm (LxWxH), weight 2300kg - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 19602 - Saw direction: vertical - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1000 - Max. cutting to feed roller opening [mm]: 300 - Max. cutting to stop opening [mm]: 370 - Max. cutting height [mm]: 4750 - Table width [mm]: 900 - Table length [mm]: 1380 - Feed roller type: Automatic electric Gsdjz H T U Aopfx Afuokc - Extraction port diameter [mm]: 220 - Options: Tiltable fence - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 25.0 - Transport dimensions: 3600mm x 1500mm x 2850mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2002, machine/vehicle number: 526-02514, functionality: fully functional, DoALL 2013-V3, 2013-V3 Vertical contour band saw Manufacture DoAll sawing Products U.S. Year of manufacture: 08/2002 S/N 526-02514 CE marked Variator drive Max. Working height 330 mm Maximum width up to the column 508 mm Capacity of the machine: b 20″ x b 13″ (508mm x 330mm) These vertical machines are one of the most versatile machines on the market! Vertical contour saws for cutting aluminum, brass, copper, mild steel, tough tool steel, stainless steel and sheet metal as well as cutting plastics and fiber materials. They are also available with a variety of attachments that allow for cutting contours, slices and more. The 2013-V2 has the same main structure, capacity and features as the 2013-V3. The only difference is the power of the motor: 2013-V3: 2.2kW/3HP, 400V, 50 Hz Standard equipment One set of high-speed guide blocks with inserts for belts from 3 to 13 mm One set of steel guide inserts for belts of 6, 10 and 13 mm Belt speed indicator Gedpfx Asu A Ikhjfujkc Removable chip tray Belt tension indicator Chip blower (requires factory air) Handwheel for lifting the column AC drive with variable speed (speed control, soft start and dynamic braking functions) Belt door interlocks Dual range gearbox Gear oil One bi-metal band saw blade Operating instructions and spare parts manual

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 100 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 100 x 195 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 100 x 135 mm saw blade turning speeds 2800 U/min total power requirement 1,5 kW weight of the machine ca. 250 kg dimensions 0,7 x 0,7 x 1,4 m ATTENTION: SPECIAL PRICE Godpfx Afjupxaxjuskc - Miter left/right 45° - fixed locking points at the most important miter angles - Pneumatic double clamping device - Safety engine brake - Complete with fog spray device and machine base

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 232597, functionality: fully functional, cutting height (max.): 320 mm, overall weight: 2,100 kg, controller model: Siemens Simatic HMI, throat depth: 370 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from November 16, 2026, to November 26, 2026! TECHNICAL DETAILS Belt length: 5,080 mm Belt speed: 250–2,000 m/min Maximum cutting height: 320 mm Overhang: 370 mm Guide rod, hydraulic lift: 200 mm Belt tension, hydraulic lift: 60 mm Gjdpfxoz Ilvzj Afujkc Material support height: 1,200 mm Roller diameter: 630 mm MACHINE DETAILS Control: Siemens Simatic HMI Operating voltage: 400 V Rated current: 32 A Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,500 x 2,700 mm Weight: 2,100 kg EQUIPMENT Roller conveyor (roller conveyor width: 350 mm) External reference: Heraeus

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Gedpswxmhlofx Afuekc Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic 82- 250 FPM Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm Gkjdsd Iipzepfx Afuec table height 870 mm band speed 18 - 110 m/min Control CNC total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Equipment: CE marking, documentation/manual, Ficep automatic sawing line, type K 115 L, year 2018, including 25-meter infeed roller conveyors and 12-meter outfeed roller conveyors, as well as buffer tables. The saw is fully automatic and can perform miter cuts on both sides, +/- 60 degrees. Gsdpfx Ajz Izgcefuokc Maximum cutting capacity at 90 degrees: 1100 x 510 millimeters. Cutting capacity at 45 degrees: 700 x 510 millimeters. Cutting capacity at 60 degrees: 460 x 510 millimeters. Motor power: 15 kW. Maximum handling weight: 11,500 kilograms. Working height: 850 millimeters.

Condition: used, Format: 0x0 Equipment: Toggle press for beech corners, 40 mm stroke, 73 mm throat depth Gksdpox Rh D Sefx Afuoc

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration Gksdpfxod Iip As Afusc • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering the desired number and length: material cut- Cutting execution and piece counting until the program is fulfilled • MPS control for entering the desired number of feeds • All important machine data is shown on the LED display during the Cutting process displayed (power consumption, cutting time, number of pieces) • The entered data is in RAM memory • The autodiagnostic circuit automatically shows all irregularities as an error message and checks the entire process • Feed unit mounted floating. • Length adjustment via handwheel and vernier with mechanical position indicator. Adjustable for section lengths from 2.5 mm to 420 mm or through Automatic reversing can be repeated 1 - 29 times, remaining piece length 210 mm