Used Berg & Schmid At 12/3 for sale (77,882)

Condition: new, capacity 90 degrees: round 300 mm capacity 90 degrees: square 330 mm 400 x 310 saw band length 3820 x 34 x 1,1 mm band speed 22 - 88 m/min table height 930 mm total power requirement 2,2 kW Ksdpfx Afswinykjdjlr weight of the machine ca. 0,8 t dimensions of the machine ca. 2,22 x 1,2 x 2,1 m Double miter band saw, hydraulic semi-automatic • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Material turntable with ball bearings b. • Adjustable quick-release • Material height sensor Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, 1000 mm 1000 mm 1200x1000 mm saw band length 11300 x 80 x 1,3 mm table height 790 mm band speed 14 - 60 m/min total power requirement 18 kW weight of the machine ca. 9,0 t dimensions 5,0 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also Klsdpfx Aet Eacgofdor “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm Kodpet Eafnsfx Afdslr saw blade turning speeds 15 - 70 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m SPECIAL PRICE!!! High-performance vertical circular saw VKS 370 (20177/201178) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush · Automatic cooling · Metal handle for high clamping force · Solid, strong cast iron table · Spring pack · Chip removal brush ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15+30 oder 30+60 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m SPECIAL PRICE!!! High-performance vertical circular saw VKS 370 (20177/201178) · miter left 60° + right 45° Kljdpfxsuay Drs Afdjr · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush · Automatic cooling · Metal handle for high clamping force · Solid, strong cast iron table · Spring pack · Chip removal brush ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: used, Miter left 60° + right 45° Hydropneumatic control of the saw unit Electropneumatic material feed unit Ksdpjxfr Nljfx Afdolr Smooth-running, high-performance worm drive with a large gear ratio, integrated into a robust cast housing for optimal cutting results Clamping fixture with double clamping arm for burr-minimized cuts, additionally featuring a lateral quick-shift for miter changes Precision prism guide for the gearbox head, laterally adjustable Especially stable base frame with integrated automatic cooling and large chip drawer CNC control: By entering various parameters such as quantity and material length, the CNC version is the ideal solution to optimize workflows.

Condition: excellent (used), saw blade diameter 350 mm Kledsiqy Abspfx Afdjr

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Kledpfxouxfucj Afdjr Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Condition: new, power: 316 kW (429.64 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel, Year of construction: 2024, Equipment: air conditioning, = Further options and accessories = - Leaf suspension = Notes = Fuel tank: 290 ltr. Air conditioning Klsdeymnzzopfx Afdor Equipped with water tank 10,500 ltr Container frame water tank on twistlocks, 20 ft Tank year of manufacture: 1999 Side-mounted engine enclosed in box Dual manhole covers on top for easy access Two rear ladders: one chassis-mounted and one container-mounted Support legs for freestanding water tank container = Further information = Transmission: ZF16TX2240TO, automatic Year of manufacture: 2024 Tyre size: 315/80R22.5 Suspension: leaf suspension Front axle: steered Gross vehicle weight: 33,500 kg

Condition: used, Year of construction: 2013, SCHNELL Optibat 100/3/12 Cutting Bench This cutting bench features 3 tracks. Length of 12 meters. It can cut materials up to 40 mm in thickness. Manufactured in 2001, it was revised in 2013. Number of tracks: 3 Length: 12 m Kjdpfxevtp Uxo Afdelr Materiel Thickness: Cut up to 40 mm

Condition: ready for operation (used), Heidenhain Id. 324 952-12 interface board, serial number: 10 829 016, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as per photos. Kledpfxex Erymo Afdor

Condition: ready for operation (used), Heidenhain UM 114 ID: 325 005-12 SN: 11501009, professionally fully overhauled and tested, comes with a 6-month warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange process, your defective return part must not exhibit any mechanical damage such as fractures or breakage, as these cannot be repaired. In such cases, an additional charge of €1,000 (incl. VAT) will apply. Attention: You are bidding on a Heidenhain UM 114 Inverter, ID 325 005-12, SN 11501009, as an exchange unit (Exchange Service), professionally fully overhauled and tested, with a 6-month warranty, 100% functional, scope of delivery as per photos. For both repair and exchange procedure, your defective return part must not show any mechanical damage such as breakages, as these are not repairable. In these cases, a subsequent invoice of €1,000 including VAT will be issued. Kljdpfx Aox Etcpjfder

Condition: ready for operation (used), Indramat KDA 3.2-100-3-A0S-W1 main spindle drive SN:04092, professionally fully overhauled and tested with 12 months’ warranty, 100% functional, scope of delivery as per photos. Ksdpfx Aox Etxksfdslr

Condition: ready for operation (used), Indramat KDA 3.2-100-3-A00-W1 main spindle drive SN:228167-02714. One connection socket is slightly damaged, which does not affect functionality in any way. Professionally fully overhauled and tested with a 12-month warranty, 100% functional. Scope of delivery as per photos. Agreed sales discounts do not apply for this item. Please enquire for price! Kedpfx Afjx Etw Tsdolr

Condition: ready for operation (used), Heidenhain 324 955-14 interface board SN: 12 476 309 A, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, delivery as shown in the photos. Kedpfxjx Eruks Afdelr

Condition: ready for operation (used), Indramat KDA 2.1-100-3-A00-W1 AC - Main spindle drive 10637-009, professionally overhauled and fully tested with 12 months warranty, 100% functional. Scope of delivery as shown in photos. Klodex Dw E Ajpfx Afdsr

Condition: ready for operation (used), Heidenhain UM 114 supply unit. 325 005-12 SN: 11874005. This item has been refurbished and has a 3-month warranty. Used, normal signs of wear, 100% functional. Scope of delivery as per photos. Kodpfx Ajrlha Ssfdelr

Condition: ready for operation (used), Indramat KDA 3.2-150-3-A0S-W1 main spindle drive SN:230900-747249-025, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please request the price separately. Kedpfstqa Urjx Afdolr

Condition: ready for operation (used), Indramat KDA 3.2-100-3-A0S-W1 AV-Mainspundle Drive, SN:230902-731398-003, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Kjdei Ebg Iopfx Afdslr

Condition: ready for operation (used), Indramat KDA 3.2-100-3-A00-W1 AC main spindle drive, serial number as per photo, professionally fully overhauled and tested with a 12-month warranty, 100% functional, delivery contents as per photos Ksdpfjx Dw E Nex Afdslr

Condition: ready for operation (used), Indramat KDA 3.3-150-3-LP0-W1 AC main spindle drive, serial number as per photo, professionally fully overhauled and tested with 12 months warranty, 100% functional, delivery scope as shown in photos. Kjdpfx Afsx Dw Hmodjlr

Condition: ready for operation (used), Indramat KDA 3.2-100-3-A0S-W1 AC-Mainspindle Drive SN230902774878005, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this article. Please ask for price separately! Kedpfx Astvctxsfdolr

Condition: ready for operation (used), Indramat KDA 3.3-150-3-A00-W1 AC main spindle drive SN:256355-01253, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per the photos. Kledpfjx Dw Hgox Afdor

Condition: new, maximum load weight: 33,570 kg, overall weight: 39,500 kg, axle configuration: 3 axles, loading space length: 12,450 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, DOLL 3-axle semi-trailer LOGO 12 * Front wall made of fine-grain steel sheet, designed in accordance with DIN EN 12642 Code L * Welded steel chequered plate cover * 3 single axles, SAF brand, 9 t Intradisc CD disc brakes * 1st axle as lift axle * Air suspension with lifting and lowering via rotary slide valve * Manually operated landing gear * 8 x DOLL Mammut bunks and stakes * 385/65 R 22.5 tyres on steel rims * LED tail lights with integrated triangular reflectors * 4x LED work lights (1,800 lumens) * RAL 9011 graphite black (frame + bunks), RAL 3002 carmine red (stakes) * COC document Various bolt-on accessories such as toolbox, additional support leg, and access ladder are available at extra cost. Kodpfxsx Egtlo Afdjlr Further information available upon request. Illustrations may differ from the original. Information provided without liability. Contact: Niclas Lott Tel.:

Condition: new, New motor from renowned German manufacturer Baumüller Nürnberg. The motor is unused, warehouse stock (old stock). No signs of operation. Technical data – from nameplate: • Manufacturer: Baumüller Nürnberg GmbH • Type: GNA 132 MV • Supply voltage: 400 V • Current: 39 A • Power: 12 kW • Rotational speed: 1260–4000 rpm • Excitation voltage: 310–365 V • Excitation current: 0.17–0.38 A • Insulation class: F • Protection class: IP23 • Standard: VDE 0530 • Serial number: 88104349 The motor is intended for automation, CNC, special machine applications, and as a spare part for existing Baumüller drive systems. Price quoted per unit. Klodpfxjyga Uge Afder

Condition: good (used), Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw Klodpfxor A H R To Afdsr -Manufacturer: Berg & Schmidt, aluminum metal circular saw Velox 350 with solid base frame -Saw blade: Ø 350 mm / 1400/2800 rpm -Cutting height: 100 mm -Cutting width: 170 mm -Double miter: 45° -Drive: 1.3 / 1.7 kW -Double clamping device: pneumatic -Dimensions: 890/600/H1670 mm -Weight: 198 kg