Used Bernardo Piercing Press for sale (12,860)

Year of construction: 2013, condition: used, Membrane press table Manufacturer: Columbus Type: Vacuum forming Year of manufacture: 2013 Technical data - Working area: 1980 x 1350 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Ledpfx Aaezuz Eho Rerr

Year of construction: 2018, condition: used, - Heating plate format (mm): 2850 x 1550 Lsdpfx Aszuz Eusa Rorr - Total pressing force (kN): 2400 - Maximum operating temperature: 180 degrees Celsius Vacuum press with 3 paternoster magazines Manufacturer: Wemhöner Type: Variopress - Basic 1000S Year of manufacture: 2018 Technical data Heating plate format (mm) 2850 x 1550 Design of the electric heating plate: Aluminum heating plate on top Total pressing force (kN) 2400 Maximum chamber pressure (bar) 6 Maximum operating temperature 180 degrees Celsius Maximum batch or workpiece size (mm) approx. 2460 x 1180 Thermoplastic film as roll stock, film width: approx. 1430 mm Film thickness (mm) approx. 0.25 - 1 Chamber height (mm) max. up to 180 Connection values: Installed power (kW) approx. 46 Required air pressure (bar) approx. 8 Including 3 x paternoster magazines for film rolls Note: The technical data and descriptions are a copy of the order confirmation from that time. The data is for informational purposes only and is not binding.

Year of construction: 1997, condition: used, Baling press Manufacturer: HSM Type: HSM 75 VL Year of manufacture: 1997 Technical data: - 2.2 kW motor - 9 t pressing force - 400 V / 50 Hz Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Lodpfx Ajzuz Dwoa Rsrr

Condition: used, Buchformpresse / Book Forming Press Kolbus FE Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Lsdpfxezu Dnlj Aa Rerr On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2007, operating hours: 10,490 h, functionality: fully functional, Channel baling press Presto HPK 20/50 S, year of manufacture 2007 Manufacturer: Presto Type: HPK 20/50 S Year of manufacture: 2007 Operating hours: 10,490 (as of 08/2026) Ljdpfszvbbrsx Aa Rorr Drive: 22 kW Pressing force: 50 t Feed opening: 1200 x 700 mm (L x W) Channel cross-section: 700 x 750 mm Feed volume, max. 0.63 m³ Cycle time: 23 s Tying: 3-fold, automatic Throughput capacity at 35 kg/cbm: 2.9 t/h 60 kg/cbm: 4.3 t/h 100 kg/cbm: 6.3 t/h Bale weight: up to 450 kg Machine dimensions: 760 x 1350 x 2350 mm (L x W x H) Machine weight: approx. 7,500 kg Materials: paper, cardboard, film Note: The press is in good condition and is currently still in operation. An inspection is possible by appointment. The machine will be available from the end of 2026. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. The sale is made against prepayment, ex works, without warranty.

Condition: used, Year of construction: 1964, machine/vehicle number: 63/10.2995-96, pressing force: 1,200 t, total length: 5,300 mm, total width: 2,690 mm, total height: 9,300 mm, overall weight: 360,000 kg, Press force: 1,200 t Ram stroke: 600 mm Ram adjustment: 500 mm Stroke rate: approx. 10 – 16 strokes/min Shut height: approx. 1,250 mm Drawing equipment: Drawing cushion force: approx. 240 t Drawing cushion stroke: approx. 250 mm Pneumatic ejector in ram: Force: approx. 95 t Stroke: approx. 150 mm Table size: approx. 3,500 x 1,900 mm Heavy-duty mechanical eccentric press in robust double-column design from Schuler, suitable for industrial applications as well as classical forming and deep drawing processes. The machine features a press force of 1,200 t with a fixed ram stroke of 600 mm and a ram adjustment of 500 mm. The stroke rate ranges from approx. 10 to 16 strokes per minute, allowing flexible use depending on the application. The working area is designed with a table size of approx. 3,500 x 1,900 mm, offering sufficient space for medium to large tooling. A key feature is the movable / sliding press table, which significantly simplifies setup and tool change and makes the machine ideal for handling heavy tools. Ljdpjy S Nhzjfx Aa Rerr The integrated drawing equipment (drawing cushion) provides approx. 240 t of force with a stroke of 250 mm, enabling demanding forming and deep drawing operations. In addition, the press is equipped with a pneumatic ejector in the ram (approx. 95 t / 150 mm), supporting automated part removal. Pressing force max.: 1,200 t Dimensions (LxWxH) approx.: 5300 x 2690 x 9300 mm Installation height max.: 1,250 mm Weight approx.: 360,000 kg Machine table clamping surface: 3500 x 1900 mm Passage between the uprights: 3,600 mm Serial number: 63/10.2995-96 Year of construction: 1,964 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, power: 4 kW (5.44 HP), We are offering this very well-maintained Uniflex HM 325.2i_C.2_FD_MVA hose crimping machine with foot pedal, year of manufacture 2020. Model: HM 325.2i_C.2_FD_MVA Serial number: 60046 Voltage: 400 V Current: 15/8.5 A Power: 4.0 kW Lrsdpjy Apdwofx Aa Rsr Frequency: 50/60 Hz Year of manufacture: 02/20 Price ex works. The machine must be collected either personally or via freight forwarding. Payment terms: 50% down payment / 50% upon collection – no cash payments! Payment by bank transfer only. Any warranty and liability are excluded. If you have any questions or require more information, please do not hesitate to send us a message.

Condition: good (used), operating hours: 4,313 h, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 6,100 mm, throat depth: 300 mm, distance table to ram: 500 mm, clearance between the columns: 5,500 mm, oil tank capacity: 350 l, overall weight: 26,000 kg, Max. pressing force: 320 t Bending length: 6100 mm Distance between uprights: 5500 mm Control system: MNC 95 c Lsdpfx Aaszvb Rms Rsrr Maximum ram stroke: 250 mm Max. distance table/ram: 500 mm Overhang: 300 mm Table width: 250 mm Closing speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Oil capacity: 350 l Operating hours: 4312 h Voltage: 380 V / 50 Hz Total power consumption: 22 kW Machine weight approx.: 26 t

Condition: excellent (used), Year of construction: 2012, tonnage 100 T Folding length 3100.00 mm guarding AKAS FIESSLER machine mounted laser guards Lrodpjztl Nzjfx Aa Rsr CNC Cybelec 880s Throat 250.0 mm Vertical stroke 200 Working speed 100mm per/sec Axis number 4 Motor power 11.0 kW ----- Weight 9000.0 kg condition excellent can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), Year of construction: 1963, Stroke = 250 mm On request, transport and loading can be organized across Europe at an additional cost. Prices excl. VAT Inspection possible by appointment. Contact us – our team will be happy to assist you. Ledpozvnd Tefx Aa Rjrr Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your production? Or do you want to sell your equipment? For further information or contact options, please use the contact form.

Condition: used, Year of construction: 2016, General technical data: Machine type: Flexographic printing press Web width: 430 mm Number of colors: 6 Equipment & Configuration: • 1-side tape cleaner • 1-side corona treatment Lrjdpfx Aaeyn Sb Uo Rjr • 3 die-cut stations • 2 gap master units • Delivery: reel or sheet with folding table • 6 UV IVT lamps • Turning bar • Delam/Relam unit – 1 color • 3 sets of sleeves • 6 anilox rollers • 3 magnetic cylinders

Condition: used, Year of construction: 2002, Machine type: Flexographic printing press Web width: 520 mm Number of colors: 8 Equipment & Configuration: • 7 UV LED units + 1 UV unit • 5 sets of sleeves • 5 magnetic cylinders • 12 anilox rollers • Cold foil unit – 1 • Turning bar – 1 • 2 die-cut stations Ljdpfx Ajyn Sclea Rerr • Double-shaft rewinder

Condition: used, Year of construction: 2017, Maximum printing width: 1,650 mm Maximum web width: 1,700 mm Printing repeat: 430 – 880 mm Maximum mechanical speed: 600 m/min Suitable for solvent-based inks and coatings CFK Air Base mandrel printing cylinder system Stork CFK Air Base anilox sleeve system Gas drying system with Maxon burners Automatic viscosity control system Allstein / Inkspec Automatic ACLEAN ink cleaning system AVISCO viscosity control ARUN automation package Hydrostatic central impression cylinder bearings Unwind * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) * Design: Shaftless * Material width: 850–1,700 mm (shaftless); minimum 450 mm with winding shaft * Web tension range: 25–300 N * Web tension control: Dancer roller * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Ledpfx Ajzp R Dpsa Rorr Rewind * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) * Design: Shafted * Material width: 450–1,700 mm * Web tension range: 25–300 N * Web tension control: Dancer roller * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Suitable for printing on: • PET • BOPP • OPA • LDPE • HDPE • PP films

Condition: refurbished (used), RETROFIT complete Pressing force: 1600 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm Ram: 750 x 450 mm Throat depth: 360 mm Downward speed: 200 mm Upward speed: 125 mm Machine height: approx. 3,500 mm Weight: approx. 7,000 kg Connection: 17 kW - a complete retrofit kit for unrestricted manual loading and unloading compliant with EC directives and CE equipment requirements, - new control cabinet with certified two-channel electronic PLC safety controller from Siemens (1512SP F or 1515F) for process control, featuring integrated control panel for the operating modes: setup with two-hand control, single stroke with two-hand control, and foot operation (only in combination with BWS); manual lever operation is no longer possible, - hydraulic safety block for monitoring the closing movement of the main cylinder, - position-monitored directional valve for the up and down movement of the ram of the main cylinder, - two-hand control device with two-channel monitoring of the two-hand synchronization at the press table (incl. 5m cable), - replacement of main and control pump motors, - replacement of seals on the main cylinder, - fine filter with contamination indicator, - the press is equipped with an electronic position measurement system (including teach-in function and display of the current ram position), eliminating the need for a mechanical cam switch. Main control panel integrated into the control cabinet (mounted on the right side of the machine): Lsdpsw S Uazofx Aa Rjrr - 12" touch panel - Control buttons and switches for operating modes and drives - USB interface for data exchange - Light curtain Option: Drawing cushion

Condition: ready for operation (used), number of spindles: 4, - Benchtop model - 4 drilling spindles - Foot switch Ledezv D D Njpfx Aa Rerr - 380/400V 50Hz 4 new drive belts have been installed.

Condition: used, Year of construction: 1998, Used 2500 mm bending machine by Safan Type: SMK 50 2550 TS1 Capacity: 2550 x 50 tons TS1 CNC control Y1, Y2, X, R, Z1 and Z2 Lodpezvyg Hsfx Aa Rjrr Year of manufacture: 1998

Condition: good (used), Year of construction: 2004, pressing force: 450 t, overall weight: 40,000 kg, AXIAL 4100x450tn + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA cnc compensation table + WILA hydraulic punch and die clamp Bending length: 4.100mm Force: 450tn Ljdpfeu Au U Tjx Aa Rsrr Cursa: 365mm Axes: 5 axes (Y1, Y2, X, R, Z) *Z-axis (double prismatic guide nipples) WILA hydraulic clamping of punch and die WILA cnc compensation table Trancha working speeds: Approach speed: 110mm/sec. Working speed: 8mm/sec. Up speed: 90mm/sec Distance between uprights: 3600mm Neckline: 410mm Opening between table and truss: 500mm Pit penetration: 975mm Cnc: Cybelec ModEva 10 (Control CPU New as of September 2023) Laser safety: DSP LASER - TX Weight: 40tn Motor power: 30KW

Condition: good (used), Year of construction: 2010, functionality: fully functional, bending force (max.): 230 t, number of axes: 5, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design Lodpfx Ajzv Sbiea Rerr - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system, 2-axis, with rack and pinion drive for X and R axis - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping", manual, hardened, self-centering; for vertical tool change - Lower tool holder with hydraulic clamping, hardened Lower tool movement - Lower tool movement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000, graphical - Workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15" touch screen - Network-enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system, 5-axis (X, X1, R, Z1, Z2) + Upper tool clamping, hydraulic + CNC crowning + BendGuard + Additional foot switch + 2 support consoles + 1 MobileControl + ACB prepared

Year of construction: 2020, condition: good (used), functionality: fully functional, DESCRIPTION/FEATURES: 5-color offset printing press for labels, with an inline flexo unit and die-cutting. Lodpjzrxdpefx Aa Rerr The machine is equipped with: • Unwinding unit • BST web guide • UV LED drying (5) • Turning bar • Offset units: 5 • Flexographic unit • BST registration camera • Automatic washing system • for ink rollers • Automatic plate loading system • Semi-rotary die-cutting unit with magnetic cylinder • Rewinding unit with slitting (blades) • (shearing) • Inking console + CIP 3 for automatic color adjustment • Cooling unit for ink fountains • CCD plate punching table • Automatic registration

Condition: used, Year of construction: 2021, power: 21 kW (28.55 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 300 mm, table length: 3,100 mm, ram plate length: 3,100 mm, total length: 4,350 mm, total width: 2,040 mm, total height: 2,515 mm, overall weight: 5,900 kg, Morgan Rushworth XPE CNC 3100/100 electric press brake in excellent condition. The machine has been used in our steel fabrication workshop and has completed relatively low operating hours. It has been well maintained and was recently serviced by the manufacturer. The press brake is fully operational and can be inspected and demonstrated under power prior to purchase. Specification: Year of manufacture: 2021 Pressing capacity: 100 tonnes Bending length: 3,100 mm Maximum stroke: 300 mm Nominal power: 21 kW Electrical supply: 400 V, 50 Hz, three-phase Machine weight: 5,900 kg Overall dimensions: 4,350 × 2,040 × 2,915 mm Serial number: B 28015 Lsdozr Ngbepfx Aa Rjrr The machine is available for inspection by appointment.

Condition: good (used), Pressure 110 Ton Edge length 3100 mm Lrjdsw Hx Rzepfx Aa Rsr Year of construction 1990+ retrofit Stand width 2600 mm Steered axles Y1,Y2,X axis Control Esa S630 control Including Wila Sealing stamp

Condition: excellent (used), Year of construction: 2004, operating hours: 76 h, machine/vehicle number: HF112305, Size 47 x 66 cm, Console DTC (Sakurai Delivery Top Console) with Touch Screen, Full Remote Control Operation, SIS (Sakurai InterActive System) for make-ready, Plate Running Register system, SAS (Sakurai Auto Set) for paper size and thickness, SPC (Semi-automatic Plate Change), Cocking Register, Automatic Washers: Blanket Cylinders & Inking Rollers, Olivermatic Dampening, Baldwin Refrigeration System & Bal Control, Feeder with Suction-belt feed table, Electronic Double Sheet & Side Lay Detector, Chromed Impression Cylinders, Perfector 4/0 - 2/2 (Fully automatic), Semi-High Pile delivery, Powder Spray. Ljdpfszubgrjx Aa Rorr

Condition: good (used), functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, pressing force: 130 t, Equipment: CE marking, FOR SALE: Amada HFE 130-3 L CNC Hydraulic Press Brake Amada HFE 130-3 L – Heavy-Duty CNC Press Brake, 130 Tonnes We are offering a used Amada HFE 130-3 L CNC hydraulic press brake in [good / fully operational] condition. A well-built machine from Amada Europe, ideal for demanding sheet metal bending applications. Key Specifications Lodpfx Aasy Hf Tvo Rorr ParameterValuePressing force1,300 kN (approx. 130 tonnes) Maximum stroke 350 mm Machine Details Year of manufacture: 2001 Condition: Good ! Tooling included Why Buy This Machine? The Amada HFE 130-3 L is a robust and precise hydraulic press brake built for high-volume industrial production. With 130 tonnes of pressing force and a generous stroke of 350 mm, this machine handles a wide variety of demanding bending tasks with excellent repeatability. Amada's renowned build quality ensures long service life and low maintenance requirements.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Durma CNC pressbrake Model CNC HAP 30160 Year : 2005 Capacity : 3050 mm. x 160 ton Control : Cybelec 3 axis (Y1 - Y2 - X) Last service and security control : July 2026 Ljdpfx Aaozuvxpj Rsrr Equipment.... -Lots of bending tools -Crowning -Front arms sideway adjustable -Foot pedal

Condition: used, Year of construction: 2001, Continuous press Manufacturer: Ligmatech Type: Optimat MDE 10 Year of manufacture: 2001 Technical data Body dimensions - Length: 300 - 2500 mm - Height: 300 - 1300 mm - Depth: 120 - 600/800 mm - Pressing forces are generated electrically, both horizontally and vertically, and can be varied independently - Pressing forces are applied vertically via a pressure plate and horizontally via 3 pressure jaws each - Pressing takes place centered and on a zero line on the operator side Positioning of the pressure jaws: Lodpfozuzxbsx Aa Rorr - Top pressure jaw with forced guidance on the top press, optionally lowerable via cylinder - Middle pressure jaw freely programmable and motor-driven - Bottom pressure jaw freely programmable and movable via a common drive with the middle pressure jaw Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.