Used Bohle Double-Head Glass Drilling Machine for sale (76,020)

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Gedpfx Aiowuz Eksxeka Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: good (used), Year of construction: 1998, grinding wheel diameter: 915 mm, overall weight: 14,000 kg, GIUSTINA Grinder R242 to ground big bearings (up to 800mm). All machine's actions are controlled by Bosch Control. Gkedpfxortr D Ij Aixja Beside controlling parts grinding process, the NC programs are also an operator guide for the machine set up and a source of information about wheel wear, thus allowing the operator to check wheels without opening the hood. Equipped with: Bosch CNC Control Specifications: Wheel Rotation Axis: Horizontal Grinding Wheel Size (OD): 915 mm Grinding Wheel Size, Usable Width: 65 mm Grinding Wheel Size, Peripheral Speed: 30 ms Spindle Motors: 75 kw Grinding Feedrate: 0.1 - 1000 mm/min Spindle Type: Moving Quill Angular Contact Spindle Bearings (Precision): ABEC-7 (ISO4) Slide Position Accuracy: 0.001 mm Coolant Flow Rate: 600 l/min Work Capacity (Approx) Rotary: 20 -200 Dia. In.

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 40 mm total power requirement 4 kW Gksdev S Iqcjpfx Aixea

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Gsdortrx Rjpfx Aixska Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BCOR12150, BIESSE BREMA EKO 902 CNC and vertical dowel insertion machine for reduced cycle times Equipment Features - Clamping grippers measure the thickness to adjust drilling depth - Laser-based measuring system for detecting the front and rear panel edges - Length tolerance compensation correcting the workpiece length in X Gjdpfx Ajw Nytnsixeka - 5-position tool changer - Drilling head with individually retractable spindles and grooving saw - Diameter: 120 mm - Gluing and dowel insertion units mounted on Y and Z axes Options - 4.5 kW electrospindle; 18,000 rpm - Special drilling unit for hinges Technical Data - Panel length: 160 - 3200 mm - Panel width: 35 - 900 mm - Panel thickness: 8 - 80 mm - X/Y/Z axis speed: 100 / 60 / 30 m/min - X axis travel: 3200 mm - Y axis travel: 900 mm - Main spindle power: 4.5 kW - Number of controlled axes: 3 axes - Number of drilling spindles: 20 - Number of tool positions: 5

Year of construction: 1994, condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60: 28 mm - Drilling diameter in steel ST 60: 32 mm - Drill spindle mount: MK 3 - Right/left rotation - Drill spindle stroke: 150 mm - Drill spindle speeds, stepless: 80 - 1170 rpm - 2 feed rates: 0.1 / 0.2 mm/rev - Overhang: 290 mm - Max. distance table - drill spindle: 780 mm - Table with 2 T-slots: 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.9 / 1.3 kW - Space requirement, approx.: W 600 x H 2100 x D 900 mm - Weight, approx.: 420 kg - Includes: - Coolant system Gsdpfedkx Anjx Aixjka - Quick-change drill chuck 1-13 - Lighting

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: FPS-20-RS, Schiatti Angelo FPS 20 RS 2015 Excellent condition 10 spindle glass edging machine including cerium wheel Gkedpfx Aiezrx Insxoa Can dismantle and load for buyer

Condition: excellent (used), machine/vehicle number: 577EK51, REF: MM6187 1 x Webomatic double chamber vacuum packing machine supplied with 16 x filler plates. Godpfx Aoxn Rz Eeixjka Technical specification ⚙️ ✅ Model - ED 120. ✅ Serial number - 577EK51. ✅ Sealing bars - 4 x 640mm long. ✅ Distance between sealing bars - 580mm. ✅ Vacuum pump - Busch RA 0100 E 5Z1. ✅ Electrical requirements - 400 V / 50 hz / 3 phase. ✅ Power - 2.2 kW / 5.4 Amps.

Condition: like new (used), Year of construction: 2011, machine/vehicle number: MA10110002, functionality: fully functional, SPECIFICATION Drilling capacity in mild steel 18mm Motor 0.45kW 415 volt Spindle 2MT Drive Belt, stepped pulleys Spindle speeds rpm 50Hz 400-700-1200-2100-3600 Spindle travel 75mm Throat depth 185mm Column diameter 70mm Table -working surface 250 x 164mm Table – slots width & centres 13 x 125mm Base – overall 240 x 360mm Max. distance chuck to table 330mm Overall height 865mm Overall width 280mm Overall depth 600mm Approx. Nett weight 77Kg Machine equipped with Chuck guard Table adjustment by rack Gsdpfxozmunto Aixoka Drill chuck

Condition: used, Year of construction: 2021, Bauer Maschinenbau Bohrmax Z40, Section Drill & Milling Machine, Overall Table Length 4350mm, 4 Sections 1050mm Long, Penta NC V2 Programme Control, 10 Tool ATC, CAT 40 Spindle, 11kw Power, Travels X Axis = 4000mm, Y Axis = 580mm, Z Axis = 700mm, Drilling Capacity 3 - 40mm, Drilling Speed Range 140 - 2300rpm, Rapid Traverse X = 24m/min, Y & Z = 7.5m/min, Table Width 560mm, Underside of Tool Holder to Table 700mm, Motor 7.5kw. S/No. 21-0156 (2021) Gkjdpfjzr Ix Aox Aixsa Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2018, power: 29.5 kW (40.11 HP), overall weight: 2,160 kg, Due to internal restructuring, we are offering the following machine from our inventory for sale: Description: HDD drilling rig Machine type: Grundodrill 4X Serial number: 4X1826295M Year of manufacture: 2018 Weight: 2,160 kg Engine power: 29.5 kW Maximum operating pressure: 310 bar Length: 3,500 mm Gsdpfx Asy Nmffsixeka Width: 1,200 mm Height: 1,710 mm Maintenance and service were recently carried out by TRACTO. The unit is in working condition. Interested parties are welcome to submit their price expectations or make an offer. If you have any questions or require further information, please send us a message or give us a call.

Condition: used, Empty weight: 4.200 kg - Documentation available: Yes - CE certificate present: No - Control: Conventional - Motor power: 2.0kW - Transport weight [kg]: 4200kg Gedpfewnifrjx Aixoka Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2007, functionality: fully functional, Ficep 1001 DZB CNC Drilling / Sawing Line- Year 2007. Rotating Spindle. Gksdpfx Aiozrpx Dsxoa Automatic Tool Changer. 4 way Scribing. Gripper feed. 18.3 metres infeed and 18.3 metres outfeed. Lift and Carry Infeed and Outfeed Cross Transfers. 1000mm Section Capacity.

Condition: good (used), functionality: fully functional, Radial drilling machine BWF BR40 * 15 speeds * min. speed: 22.4 rpm * max. speed: 2800 rpm T slot table: * Length: 1600mm * Width: 800mm Machine dimensions: * Length: 2500mm * Height: 2800mm Gkedpfx Aioviu Nmsxsa * Width: 1000mm

Condition: used, Year of construction: 1975, drilling capacity steel/cast iron 23,30 mm throat 300 mm bore stroke 140 mm spindle taper MT MK 3 spindle turning speed range 208- 2000 U/min table travel 400 mm weight of the machine ca. 275 kg Gkodpfeymp Snsx Aixoa table-size 415 x 300 mm distance work spindle /surface of the table 450 mm voltage 400 V connected load 0,9/1,4 kW

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,800 kg, Spindle: MK4 Clamping area: 1200 x 500 Clamping slots: Number 3, width 18, spacing 125 Maximum drilling capacity: for St 60 steel: 32 mm at 0.2 mm/rev for GG 20 cast iron: 45 mm at 0.2 mm/rev Gsdezuarmjpfx Aixoka

Condition: as good as new (ex-display), Year of construction: 2021, The machining center PROJECT TF 600 S was developed for efficient cabinet (carcass) production. Technical Specifications: Axes: X-Axis: - Max. workpiece length: 2,800 mm - Min. workpiece length: 200 mm - Travel speed: 130 m/min Y-Axis: - Max. workpiece width: 1,200 mm - Min. workpiece width: 50 mm - Travel speed: 75 m/min Z-Axis: - Max. workpiece thickness: 60 mm - Min. workpiece thickness: 8 mm - Travel speed: 30 m/min Units for 6-sided machining: 1. Top drilling head: - Vertical spindles in X-direction: 7 pcs - Vertical spindles in Y-direction: 5 pcs - Horizontal twin drilling spindles in X-direction: 2+2 pcs - Horizontal twin drilling spindles in Y-direction: 1+1 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm - Motor: 2.2 kW 2. Top drilling head: - Vertical spindles in X-direction: 7 pcs - Vertical spindles in Y-direction: 5 pcs - Horizontal twin drilling spindles in X-direction: 2+2 pcs - Horizontal twin drilling spindles in Y-direction: 1+1 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm - Motor: 2.2 kW 3. Top grooving saw in X-direction: - Speed: 3,400 rpm - Max. saw blade diameter: 120 mm - Groove position: between 55 and 800 mm 4. Top routing unit: - For milling and grooving - Motor: 3.5 kW - Collet: ER 25 - Max. tool diameter: 16 mm 5. Bottom routing unit: - For milling and grooving - Motor: 3.5 kW - Collet: ER 25 - Max. tool diameter: 16 mm 6. Bottom drilling head: - Vertical spindles in X-direction: 3 x 3 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm Control via Windows PC Software: MASTERWORK MACHINE VERSION Mobile control console with color screen, keyboard, and mouse Wireless barcode reader Godpsw Ugpysfx Aixoka Additional features: - Intelligent, patented worktable: The worktable moves automatically up and down, as well as left and right for optimal support of all drilling and milling operations. Through-feed drilling and milling is also possible. - Controlled workpiece clamping device - Energy-efficient air flotation tables using an integrated fan (instead of external compressed air) - Rack and pinion drive on X and Y axes with linear guides - Ball screw drive on Z-axis with linear guides - CE safety features: light barriers and fencing, as well as 2 pressure stages for the clamping jaws - Automatic central lubrication system Further data: Dimensions: 5,280 x 2,480 x 2,190 mm (LxWxH) Extraction connections: 2 x 200 mm, 1 x 100 mm Required air pressure: 8 bar

Condition: used, functionality: fully functional, spindle mount: MK 2, quill stroke: 120 mm, Equipment: type plate available, Gillardon pillar drilling machine Manufacturer: Maschinenfabrik Wilhelm Gillardon II, Bretten i. Baden According to the information on the attached nameplate, the drilling machine is powered by a motor from VEM Elektromotorenwerke Thurm. Electric motor Three-phase asynchronous motor, type KPER 80 K 4 VEM Motors Thurm GmbH, D Zwickau 3 speed ranges via belt drive. Pinole stroke approx. 120 mm, drilling spindle with Morse taper 2, weight approx. 150 kg / approx. 1380 RPM MK2 drilling column Power consumption 0.75 kW, mains connection 380 volts, 50 Hz. Good used condition Nameplate present An inspection of the bench drilling machine while it is powered on is possible after prior appointment. Price negotiable Godpfx Aeh N Svlsixoka Our asking price is €390 net ex works, plus packaging costs. All technical specifications are subject to typographical errors/mistakes. Sale exclusively within EU countries.

Condition: good (used), Year of construction: 1999, functionality: fully functional, 11 cup wheels vertical glass edging machine min. glass height : 50 mm Gsdpfjztatusx Aixoka glass thikness : 3 - 30 mm machine dimensions : L x W x H : 8,1 x 1,2 x 2,3 m power : 23,8 Kw weight : 4150 kg reconditioned machine from year 2018 We look for export outside the EU . low price .

Condition: used, Technical details: bore capacity in steel (diameter): 2-20 mm throat: 210 mm bore stroke: 100 mm Distance spindle/table max.: 450 mm range of revolution per miute: I : 450-1800 + II: 900-3550 / 4step U/min spindle taper MT: 2 table surface area: 340x280 mm total power requirement: 1,1 kW machine weight ab.: 165 kg transport dimensions LxWxH: 0,6 x 0,5 x 1,28 m Gjdszgaiiepfx Aixjka Robust industrial drilling machine manufactured in the former East Germany by the "Fritz Heckert" Machine Tool Combine. Equipped with a 1.1 kW motor, 380 V three-phase power supply, and a machine weight of approximately 165 kg. Precision machine suitable for drilling, countersinking, and light reaming operations. Solid cast-iron construction, ideal for toolmaking, workshops, maintenance departments, and training facilities. *

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, 5-axis machining center with traversing table, model MFS, equipped with an 840D Siemens control system. Gkjdpfjy Rgt Esx Aixea Travel ranges: 13200 x 3000 x 1200 Spindle: SK50, motor with a rated power of 15 kW. Maximum spindle speed: 2500 rpm.

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: Gedpexlqxfsfx Aixska - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: used, Year of construction: 1988, taper MK 1 Godpfx Aeztfwfjixoka weight of the machine ca. 140 KG

Condition: good (used), Year of construction: 1990, machine/vehicle number: 13616, Offer 26182 Technical data: - Drilling capacity in steel ST 60 approx. 75 mm - Drilling capacity for enlarging holes approx. 90 mm - Thread cutting up to approx. M 60 - Drill spindle mount MK 5 - Drill spindle stroke 380 mm - Overhang min. / max. approx. 420 / 2000 mm - Column diameter approx. 500 mm - Stroke of the arm approx. 1380 mm - Min. / max. distance: - Spindle - base plate approx. 370 - 1750 mm - Base plate clamping surface approx. 1100 - 2300 mm - 12 spindle speeds 19 - 1900 rpm - 9 feed rates 0.09 - 0.75 m/rev Gsdpjztp Disfx Aixeka - Drill spindle drive 400 V / 10 kW - E - Central clamping system - Coolant system - T-slot table - Various chucks + drills - Space requirement approx. W 1400 x H 3400 x D 3600 mm - Weight approx. 8000 kg

Condition: used, Year of construction: 1997, bore capacity in steel (diameter) 32 mm Gsdpfx Aeztf Auoixska arm length ca. 920 mm