Used Cambio Debark for sale (142)

Condition: new, The Nero X-45M is designed for use with tractors in categories I and II and requires an engine output of 35–43 kW (48–60 hp). Thanks to the standard PTO shaft, it can be quickly connected to the tractor and put into operation immediately. The cable guide is flexible: the scope of delivery includes 70 m of cable with a diameter of 10 mm, including end hook. The winch can accommodate cables up to 110 m / 10 mm diameter or 90 m / 11 mm diameter. The average cable speed of 0.9 m/s ensures efficient work while maintaining safety. The mechanical cable payout and the standard manual control enable precise operation from a safe distance. With a shield width of 142 cm, a depth of 53 cm, and a height of 225 cm including the protective grid, the Nero X-45M is compact enough for use in tight forestry areas, but also offers sufficient protection for the operator. The standard equipment includes a lower cable inlet roller, a drawbar, and a chainsaw holder. - High pulling force: 4.5 t, braking force 56 kN - Flexible cable capacity: up to 110 m / 10 mm diameter or 90 m / 11 mm diameter - Quick deployment: PTO shaft included, compatible with categories I & II - Efficient & safe: average cable speed 0.9 m/s - Convenient operation: mechanical cable payout, manual control as standard - Robust & compact: shield width 142 cm, depth 53 cm, height 225 cm including protective grid - Standard equipment: lower cable inlet roller, drawbar, chainsaw holder End hook: yes Clutch plates: 1 Drawbar: standard Manual control: standard 3-point hitch: Cat. I & II Shield width: 142 cm Chainsaw holder: standard Cable included: 70 m / 10 mm diameter Product dimensions without protective grid: 142 × 142 × 53 cm Cable payout: mechanical Lower cable inlet roller: standard PTO shaft: included Drive: Power take-off Braking force: 56 kN Average cable speed: 0.9 m/s Lhodpfx As Abkl Uomzjn Maximum cable capacity: 110 m / 10 mm diameter or 90 m / 11 mm diameter Pulling force: 4.5 t Tractor power: 35–43 kW (48–60 hp) Product dimensions with protective grid: 225 × 142 × 53 cm

Condition: new, The Nero X-35M is designed for use with tractors in categories I and II and requires an engine power of 25–35 kW (34–48 hp). Thanks to the standard-equipped PTO shaft, it can be quickly connected to the tractor and put into operation immediately. The cable guide is flexible: the scope of delivery includes 70 m of cable with a diameter of 9 mm, including end hook. The winch can accommodate cables up to 90 m / 9 mm or 75 m / 10 mm. The average cable speed of 0.9 m/s ensures efficient work while maintaining safety. The mechanical cable payout and the standard manual control allow for precise operation from a safe distance. With a shield width of 122 cm, a depth of 49 cm and a height of 210 cm including protective grille, the Nero X-35M is compact enough for use in confined forestry areas, but still offers sufficient protection for the operator. Standard equipment includes a lower cable inlet roller, towing hitch and chainsaw holder. - High tensile force: 3.5 t, braking force 44 kN - Flexible cable accommodation: up to 90 m / 9 mm or 75 m / 10 mm Ledpfe Abkluex Amzohn - Quick deployment: PTO shaft included, compatible with categories I & II - Efficient & safe: average cable speed 0.9 m/s - Practical operation: mechanical cable payout, manual control as standard - Robust & compact: shield width 122 cm, depth 49 cm, height 210 cm incl. protective grille - Standard equipment: lower cable inlet roller, towing hitch, chainsaw holder Manual control: Standard Chainsaw holder: Standard Drive: PTO shaft Shield width: 122 cm Product dimensions with protective grille: 210 × 122 × 49 cm Braking force: 44 kN Cable included: 70 m / 9 mm Cable accommodation up to: 90 m / 9 mm or 75 m / 10 mm 3-point linkage: Cat. I & II Cable payout: mechanical Product dimensions without protective grille: 130 × 122 × 49 cm PTO shaft: included Tractor power: 25–35 kW (34–48 hp) End hook: yes Average cable speed: 0.9 m/s Towing hitch: Standard Tensile force: 3.5 t Clutch discs: 1 Lower cable inlet roller: Standard

Condition: excellent (used), Catalog number: 8079 Ledpezu Svwjfx Amzohn TECHNICAL DATA - log diameter 60-360mm - min. log length 1500mm - rotor diameter 385mm - number of knives 4 - drive system: PTO shaft - dimensions (L/W/H) 2200x2900x1700mm - weight approximately 3000kg ADVANTAGES - PTO shaft drive - for debarking logs - country of origin: Finland - used debarker, very good condition Net price: 38900 PLN Net price: 9050 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: new, NERO X-55H Winch – Powerful forestry winch for professional timber extraction The NERO X-55H has been developed for demanding applications in forestry, agriculture, and timber extraction. Thanks to its robust construction, high pulling force, and modern control technology, this winch is ideal for the safe pulling and moving of logs, even under difficult operating conditions. The electro-hydraulic cable payout system enables comfortable and efficient operation. The standard radio remote control ensures precise control from a safe distance and increases comfort and operational safety in daily use. The sturdy design guarantees high load capacity and a long service life. Additional safety features such as a cable payout brake, speed regulation, and emergency operation support controlled work in the forest and on uneven terrain. The 3-point linkage allows for quick and secure mounting of the winch on the tractor. The standard equipment, including a chainsaw holder, drawbar, and protective guard, makes the X-55H a reliable piece of equipment for professional users. Powerful forestry winch for professional applications 5.5 t pulling force for efficient timber extraction Electro-hydraulic cable payout system Ljdpo Abkmlefx Amzehn Radio remote control for comfortable operation Robust and durable steel construction Cable payout brake for added safety Speed regulation for controlled operation 3-point linkage for quick tractor connection Includes drawbar and chainsaw holder Typical applications Forestry Timber extraction Agricultural operations Forest maintenance Firewood harvesting Professional forestry work Cable capacity up to: 110 m / Ø 10 mm or 90 m / Ø 11 mm Cable payout brake: yes End hook: yes Braking force: 69 kN Cable payout: electro-hydraulic Product dimensions with protective guard: 230 x 152 x 53 cm Emergency operation: yes Tilt stop: yes Product dimensions without protective guard: 152 x 152 x 53 cm Manual operation: yes Cable included: 70 m / Ø 11 mm Average cable speed: 0.6 m/s PTO shaft: included Speed regulation: yes Lower cable payout roller: standard Drawbar: standard Pulling force: 5.5 t Shield width: 152 cm Drive: PTO shaft Tractor power: 45–55 kW (60–75 hp) Clutch discs: 3 3-point linkage: Cat. I & II Chainsaw holder: standard

Condition: new, The Nero X-85H is designed for use with tractors in categories I and II and requires an engine output of at least 59 kW (80 hp). Thanks to the standard PTO shaft, it can be quickly connected to the tractor and put into operation immediately. The cable guide is flexible: the scope of delivery includes 90 m of cable with a diameter of 13 mm, including end hooks. The winch can accommodate cables up to 120 m / Ø 12 mm or 100 m / Ø 13 mm. The average cable speed of 0.6 m/s ensures efficient work while maintaining safety. The electro-hydraulic cable payout, the standard manual control, and the remote control enable precise control from a safe distance. In addition, an emergency control is integrated, which allows for safe operation even in the event of a control failure. A cable infeed brake and speed control provide additional protection and controlled operation. The standard equipment also includes a tilt stop, a lower cable infeed roller, a hitch, and a chainsaw holder. With a shield width of 184 cm, a depth of 65 cm, and a height of 230 cm including the protective grille, the Nero X-85H is compact enough for use in confined forestry areas, but at the same time offers sufficient protection for the operator. - High pulling force: 8.5 t, braking force 106 kN - Flexible cable capacity: 120 m / Ø 12 mm or 100 m / Ø 13 mm - Quick deployment: PTO shaft included in the scope of delivery, connection Cat. I & II - Efficient & safe: Speed adjustable - average cable speed 0.6 m/s - Practical operation: electro-hydraulic cable payout, manual control standard, remote control, emergency control - Additional safety: cable infeed brake - Standard equipment: tilt stop, lower cable infeed roller, hitch, chainsaw holder Manual control: yes Emergency control: yes Clutch discs: 4 Chainsaw holder: standard Product dimensions without protective grille: 175 × 184 × 65 cm Hitch: standard Product dimensions with protective grille: 230 × 184 × 65 cm Shield width: 184 cm Braking force: 106 kN Cable capacity up to: 120 m / Ø 12 mm or 100 m / Ø 13 mm Tractor output: from 59 kW (80 hp) Lhodpfx Ae Abkmxsmzen Pulling force: 8.5 t Cable infeed brake: yes Lower cable infeed roller: standard Cable payout: electro-hydraulic Cable included: 90 m / Ø 13 mm Drive: PTO shaft Speed control: yes End hook: yes PTO shaft: included in the scope of delivery Average cable speed: 0.6 m/s 3-point linkage: Cat. I & II Tilt stop: yes

Condition: reconditioned (used), functionality: fully functional, • Infeed and centering table in front of the machine • 6-36 cm diameter of the roundwood • 1.5 m minimum length of the logs • 1 set of new debarking knives • 1 set of debarking knives as a spare part • 30 kW main motor Ledpszn Ulzjfx Amzjhn • 7.5 kW feed gear • Complete electrical system • Machine workshop-tested and newly painted •

Condition: like new (used), Year of construction: 2018, HÄWA Debarking Machine - Type H256 / 800 - Manufactured from a heavy-duty welded steel structure - 4 pairs of log feed rollers - 1 split, toothed pair of log feed rollers - Log feed roller speed controlled by a frequency inverter - Milling arm manufactured from a heavy-duty steel structure Lsdpedwidwjfx Amzohn - Milling head: working width 300 mm, impact bars, impact knives, and run-in ring - Milling head fitted with hard metal - Hydraulic lowering of the milling head - Milling head feed controlled by a frequency inverter - Log feed rollers 800 mm - Log diameter 0.2 m – 1.0 m - Log length 1.0 m – 6.0 m - Total connected load 35 kW - With HBC radio remote control - Available immediately - Year of manufacture 2018

Condition: new, The Nero X-55M is designed for use with tractors in categories I and II and requires an engine power of 45–55 kW (60–75 hp). Thanks to the standard PTO shaft, it can be quickly connected to the tractor and put into operation immediately. The cable guide is flexible: the scope of delivery includes 70 m of cable with a diameter of 11 mm, including end hooks. The winch can accommodate cables up to 110 m / Ø 10 mm or 90 m / Ø 11 mm. The average cable speed of 0.6 m/s ensures efficient work while maintaining safety. The mechanical cable payout and standard manual control allow for precise operation from a safe distance. With a shield width of 152 cm, a depth of 53 cm, and a height of 230 cm including the protective grid, the Nero X-55M is compact enough for use in confined forestry areas, but at the same time offers sufficient protection for the operator. As standard, the equipment includes a lower cable inlet roller, a towing device, and a chainsaw holder. - High pulling force: 5.5 t, braking force 69 kN - Flexible cable capacity: up to 110 m / Ø 10 mm or 90 m / Ø 11 mm Lodj Abkmfjpfx Amzjhn - Quick deployment: PTO shaft included, connection cat. I & II - Efficient & safe: average cable speed 0.6 m/s - Practical operation: mechanical cable payout, manual control as standard - Robust & compact: shield width 152 cm, depth 53 cm, height 230 cm incl. protective grid - Standard equipment: lower cable inlet roller, towing device, chainsaw holder Chainsaw holder: standard Towing device: standard Cable included: 70 m / Ø 11 mm Average cable speed: 0.6 m/s 3-point linkage: Cat. I & II Manual control: standard Lower cable inlet roller: standard Tractor power: 45–55 kW (60–75 hp) Product dimensions without protective grid: 152 × 152 × 53 cm Clutch discs: 3 Braking force: 69 kN End hook: yes Product dimensions with protective grid: 230 × 152 × 53 cm Shield width: 152 cm Drive: PTO shaft Cable capacity up to: 110 m / Ø 10 mm or 90 m / Ø 11 mm Pulling force: 5.5 t Cable payout: mechanical PTO shaft: included

Condition: new, - 5.0 tons pulling force at the drum core Ledpfxe Adg R Ss Amzjhn - 3.0 tons pulling force of the uppermost rope layer - Mechanical rope pulling control with dead man's switch - Shield width 1,500 mm - Low own weight of 210 kg - Clean rope winding - Low rope inlet, height 1,250 mm - Includes rope 70 m/10 mm, highly compacted, with Flemish eye and swivel hook - Maximum rope capacity 100 m/10 mm - Rope inlet speed 40 m/min - For tractors from approx. 20 kW - No electro-hydraulic control possible Max. pulling force: 5.0 t Min. pulling force: 3.0 t For tractors from: 11 kW Rope capacity/diameter: 80 m/10 mm Height of the rope inlet roller: 1250 mm Shield width: 1500 mm Rope inlet speed: 40 m/min Weight: 210 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, Production line manufactured by a Canadian company Brunette, which can be described as very powerful and durable. Ledpfxsvu D Dws Amzjhn The offer includes a log debarker with feeding tables, bark collection conveyors, as well as a chipper with 630kW installed capacity and a double screw unloading conveyor.

Condition: reconditioned (used), Year of construction: 1974, Valonkone VK26M (1974 series) with outfeed table: - Main machine - Feeding table ( driven ) - outfeed table - switch cabinet IMMEDIATELY available from stock Including infeed and outfeed table, workshop inspected * - Debarking capacity: 10cm - 61cm diameter - 4 main cutters - 4 cutting knives - Rotor speed =235 rpm / min - Rotor opening = 65cm - 30 KW motor, speed 1500/ min - Speed: 17-42m / min - 3m or longer ( wood length ) Dimension ( without infeed and outfeed table ) L= 9840mm infeed table: 3540mm x 1000mm x 1900 Main machine VK26M : 2530mm x 2200mm x 2350 Outfeed table ( motorized table ) : 3170mm x 1000mm x 1300 Ljdetwrp Djpfx Amzjhn RENOVATION: Pos 1 1 Content: Machine disassembly, washing, sandblasting, priming and painting, repair, assembly Pos 2 1 Material blade axles on rotor new bearings and sealing (if necessary) Item 3 5 5 Other material: piece of V-belt for rotor drive Item 4 1 Gear oil Item 5 1 Material: Abrasive + paints Item 6 4 Valonkone piece peeling blade Item 7 4 Valonkone piece Pre-separator Pos 8 1 Switch cabinet : with 3-phase delta start for 30 kw main motor with 3-phase delta start for 11 kw geared motor with start for 4 kw geared motor infeed with start for 4 kw geared motor output Main starter Emergency STOP

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: Lhjdpfx Amsy Na Hvozen – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Condition: new, Description The AMR EKO E debarking machine with electric drive and pointing device is ideal for upgrading low-quality wood with diameters from 40 to 250 mm. This machine efficiently debarks, points, and bevels wood pieces. The debarked wood is of high quality and has excellent storage properties. The durable design made of high-quality materials ensures long-term use. The equipment includes a blower with a pipe bend of Ø 160 mm, as well as a simple discharge flap and two support stands, which further facilitate operation. Lhjdpfx As Adggyjmzon - Upgrade low-quality wood – continuously adjustable from Ø 40 – 250 mm - Debark, point, and bevel with a single machine - Debarked wood is of higher quality and has excellent and long-lasting storage properties - Universally applicable via PTO shaft or electric motor - Durable quality thanks to high-quality materials - Pointing device - Blower with pipe bend Ø 160 mm - Simple discharge flap - 2 support stands Wood diameter sawing: 1,500-3,000 mm Wood length: 1,500-3,000 mm Feed knives: 2 Width in transport position: 1,115 mm Dimensions (H x L): 1,966 x 1,255 mm Width in working position: 2,366 mm Debarking knives: 4 Drive: 400 V / 11 kW Wood diameter for pointing: 40-150 mm Max. speed: 2,400 rpm Wood diameter for debarking: 40-250 mm

Condition: new, Year of construction: 2021, For sale is a new Nicholson A6/35" 5-arm machine with roller drive. The machine is still in its original packaging. Assembly and commissioning can be carried out by us. Lodpewt T Unefx Amzehn

Condition: new, - High-quality product from Austria - 4.5 tons pulling force at the drum core - 3.0 tons pulling force of the uppermost cable layer - Mechanical cable winch control with dead man's switch - Shield width 1,250 mm - Low weight of 170 kg - Clean cable spooling - Low cable entry point, height 1,200 mm - Incl. 60m/10mm high-density cable with Flemish eye and swivel hook - Maximum cable capacity 80m/10mm - Cable winch speed 40m/min - Suitable for tractors with approximately 10 kW and above - No electro-hydraulic control possible Max. pulling force: 4.5 t Min. pulling force: 3.0 t Suitable for tractors from: 10 kW Weight: 170 kg Height of cable entry roller: 1200 mm Lhjdpfxo Adg R Es Amzon Shield width: 1250 mm Max. cable capacity/diameter: 80m/10mm Cable winch speed: 40 m/min

Condition: used, Debarking plant with drum debarker and disc chipper. Debarking drum type KMW Waplan in 3 sections with electrical motors for operate the debarker. Total length 45 meter Drum diameter 3.8 meter Each drum section 15 meter in length Water bearing system with pump system. Possibility to offer extra debarking sections if more are needed. Lhedpfsw N Rxbsx Amzjn Disc chipper for production of cellulose chips type KMW HH901-T12 Iggesunds "turnable chipping knife system" Capacity up to 1200 m3 of ready made chips per hour In-feed opening 760 mm Diameter chipping disc: 3400 mm Net weight: 27000 kg

Condition: new, - High-quality product from Austria - 3.5 tons pulling force at the drum core - 2.0 tons pulling force of the top rope layer - Mechanical rope winch control with dead man's switch - Shield width 1,000 mm - Low weight of 155 kg - Clean rope spooling - Low rope inlet, height 1,150 mm - Incl. 60m/10mm rope, highly compacted, with Flemish eye and swivel hook - Maximum rope capacity 60m/10mm - Rope inlet speed 40 m/min - For tractors from approx. 10 kW - No electro-hydraulic control possible For tractors from: 10 kW Weight: 155 kg Shield width: 1000 mm Min. pulling force: 2.0 t Rope capacity/diameter: 60m/10mm Max. pulling force: 3.5 t Ledpfx Aj Adg Rxjmzohn Height of the rope inlet roller: 1150 mm Rope inlet speed: 40 m/min

Condition: new, The Nero X-65H is designed for use with tractors in categories I and II and requires an engine power of 55–65 kW (75–90 hp). Thanks to the standard PTO shaft, it can be quickly connected to the tractor and put into operation immediately. The cable guide is flexible: the scope of delivery includes 80 m of cable with a diameter of 12 mm, including end hooks. The winch can accommodate cables up to 120 m / 11 mm diameter or 100 m / 12 mm diameter. The average cable speed of 0.6 m/s ensures efficient work while maintaining safety. The electro-hydraulic cable payout, the standard manual control, and the remote control enable precise control from a safe distance. In addition, an emergency control is integrated, which allows for safe operation even in the event of a control failure. A cable inlet brake and speed regulation provide additional protection and controlled operation. The standard equipment also includes a tilt stop, lower cable inlet roller, towing hitch, and chainsaw holder. With a shield width of 164 cm, a depth of 65 cm, and a height of 230 cm including the protective guard, the Nero X-65H is compact enough for use in tight forest areas, but at the same time offers sufficient protection for the operator. - High pulling force: 6.5 t, braking force 81 kN - Flexible cable accommodation: up to 120 m / 11 mm diameter or 100 m / 12 mm diameter - Quick deployment: PTO shaft included, connection Cat. I & II - Efficient & safe: speed adjustable – average cable speed 0.6 m/s, - Practical operation: electro-hydraulic cable payout, manual control standard, remote control, emergency control - Additional safety: cable inlet brake - Standard equipment: tilt stop, lower cable inlet roller, towing hitch, chainsaw holder Manual control: yes Average cable speed: 0.6 m/s Speed regulation: yes Lower cable inlet roller: standard PTO shaft: included Tilt stop: yes Product dimensions with protective guard: 230 × 164 × 65 cm Towing hitch: standard 3-point hitch: Cat. I & II End hook: yes Lodpfx Ame Abkmrjzshn Pulling force: 6.5 t Tractor power: 55-65 kW (75-90 hp) Braking force: 81 kN Product dimensions without protective guard: 175 × 164 × 65 cm Cable payout: electro-hydraulic Chainsaw holder: standard Clutch discs: 4 Cable included: 80 m / 12 mm diameter Emergency control: yes Drive: PTO shaft Shield width: 164 cm Cable accommodation possible up to: 120 m / 11 mm diameter or 100 m / 12 mm diameter Cable inlet brake: yes

Condition: new, - 4.5 tons pulling force at the drum core Lede Adg Scepfx Amzshn - 3.8 tons pulling force of the top cable layer - Mechanical cable winch control with dead man’s switch - Blade width 1,600 mm - Low dead weight of 280 kg - Clean cable winding - Low cable entry point, height 1,350 mm - Incl. 70m/11mm high-density cable, Flemish eye with swivel hook - Maximum cable capacity 100m/10mm - Cable winch speed 40 m/min - Suitable for tractors from approx. 25 kW - No electro-hydraulic control possible Min. pulling force: 3.8 t For tractors from: 25 kW Cable winch speed: 40 m/min Weight: 280 kg Max. cable capacity/diameter: 100m/10mm Blade width: 1600 mm Max. pulling force: 5.5 t Height of cable entry roller: 1350 mm

Condition: ready for operation (used), Year of construction: 1999, A Söderhamn Eriksson log debarking machine with infeed and outfeed units, but without electrical equipment (control cabinets), is available. Feed speed: 75m/min, Log diameter range: 110mm-750mm, Rotor speed: 222rpm, Rotor motor power: 75kW, Feed motor power: 2.2kW, Hydraulic power unit: 1.5kW. The rotor of this machine was replaced with a factory-overhauled rotor in 2021. Documentation available. An on-site inspection is possible. Lhsdpjruq Dfofx Amzon

Year of construction: 2024, condition: new, - debarker with 3/3 feed rollers Ledpfxjfvbphs Amzohn - infeed and centering table - min log diameter 100 mm - max log diameter 600 mm - min log length 2.000 mm - 30 m/min feed speed - 5 pcs. changeable carbide knives - 37 KW Main Motor - 9,2 KW Gearbox inffed and centering table - 5,5 + 7,5 KW Gearbox feed rollers - 9.000 Kg weight

Condition: reconditioned (used), B., VK26M (model series 1974) with motorized discharge table: - Main machine - Infeed table (driven) - Discharge table - Control cabinet Including infeed and discharge table, workshop inspected * - Debarking capacity: 10 cm - 61 cm diameter - 4 main separators - 4 cutting knives - Rotor speed = 235 RPM - Rotor opening = 65 cm - 30 kW motor, speed 1500/min - Speed: 17-42 m/min - 3 m or longer (wood length) Dimensions (without infeed and discharge table) L = 9840 mm Infeed table: 3540 mm x 1000 mm x 1900 mm Main machine VK26M: 2530 mm x 2200 mm x 2350 mm Ledpfx Aofn Iu Iemzjhn Discharge table (motorized table): 3170 mm x 1000 mm x 1300 mm RENOVATION: Pos 1: 1 unit: Machine disassembly, washing, sandblasting, priming, and painting, repair, assembly Pos 2: 1 unit: Material - knife axle bearings on the rotor, new bearings and seals (if required) Pos 3: 5 units: Miscellaneous material: V-belt for rotor drive Pos 4: 1 unit: Gear oil Pos 5: 1 unit: Material: Abrasives + paints Pos 6: 4 units: Valonkone peeling knives Pos 7: 4 units: Valonkone pre-separators Pos 8: 1 unit: Control cabinet: with 3-phase delta start for 30 kW main motor with 3-phase delta start for 11 kW geared motor with start for 4 kW geared motor input with start for 4 kW geared motor output Main starter Emergency STOP

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16041309, cutting length (max.): 4,800 mm, cutting height (max.): 1,150 mm, roll diameter: 115 mm, saw drive: 30 W, input current: 56 A, input voltage: 400 V, Equipment: 3rd hydraulic function, WRAVOR WRC 1150 AC BAND SAWMILL FOR SALE Lhedpfxey Hx I Te Amzon Stationary WRAVOR WRC 1150 AC band sawmill with log infeed system. Year of manufacture: 2016 The machine is still in operation and can be inspected while running. Technical specifications: Capacity when processing oak logs, diameter 250–700 mm: approx. 18–20 m³ per 8-hour shift Total installed power: 66 kW Main drive motor: 30 kW 2 debarkers Saw blade dimensions: 140 × 8,190 mm Wheel diameter: 1,150 mm Wheel width: 115 mm Cutting optimization software The machine is currently installed and operational. Please contact us for further information, photos, videos, price or to arrange an inspection.

Condition: new, Year of construction: 2026, functionality: fully functional, StoMill 1000 – Our cost-effective root reducer for automated processing. Our StoMill 1000 is a compact root reducer for the reliable processing of roundwood with diameters up to 1,200 mm and log lengths up to 20 m. In addition to the reducing operation, logs can also be debarked through manual repositioning; an optional automatic repositioning device is also available. The logs are fed using a forklift or crane. An 8-channel radio remote control is available for operation, enabling simple, automated control. This makes the StoMill 1000 particularly suitable for smaller to medium-sized woodworking operations. Lhodpfsztapvex Amzon The advantages of the system at a glance: Low operating costs with the same reducing result due to extremely low drive power of 15 kW Option: Reducing shaft with 22 kW drive power Low power consumption and, above all, hardly any expensive peak power All systems with patented safety blade shaft Fully automatic sequence of the reducing process Radio remote control with 2 programs and control of the clamping device and ejector The log can be repositioned several times and thus, if required, also completely debarked Optional with automatic repositioning device Carrier discs for log rotation with a wide, grippy support surface including lateral protective cover Wear-resistant carrier disc drive Practical chip box Since the chips are very short, they can be burned immediately in the wood chip system All systems with control cabinet and oil tank heating, therefore unrestricted operation even at sub-zero temperatures. Safety device, CE approval including declaration of conformity The following questions are important to us: What log lengths do you process? Do you want to reposition the logs or perhaps also debark them with the reducer? With what device (gripper, forklift, etc.) are the logs placed on the reducer? Should the logs be automatically ejected after the reducing process? How should the system be set up to achieve an optimal workflow? How high should the system be? Is a conveyor system for the removal of the bark advantageous? Is an automatic log feed required for repositioning? Should an automatic transfer of the log to another machine take place? Based on these questions, we determine the optimal position of the reducing shaft, the length of the machine, and the necessary technical equipment. Our modular system allows for a precise adaptation of the root reducer to your specific application.

Condition: refurbished (used), Korowarka do drewna BARGAR BG90 PO NAPRAWIE GENERALNEJ Z GWARANCJA przeswit 900mm 5 nozy silnik 30kw complete Lodpjvpixpsfx Amzehn