Used Cmt Cnc Cycle Lathe for sale (14,769)

Condition: not inspected (used), Year of construction: 1989, 2 UNITS X , 10:13:00] Saeid Khodaparast: CNC lathe YAM CK-3A (1989) at auction. FANUC series O-T control, approx. 6,647 operating hours, footprint approx. 4400 x 1800 x 2600 Length between centres: 900 mm • Turning length: 800 mm • Diameter above the bed: 550 mm • X-axis travel: 380 mm Hodpfxoz I Ed Se Akronu • Spindle bore: 91 mm • Maximum workpiece weight: 900 kg WHATS APP

Condition: used, Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Doosan Turning Center 2 Axes (X, Z) Hjdpfx Aez St Tqjkrsnu Model: Puma GT2100B Year: 2018 CNC: Fanuc CE Certification Chip Conveyor: Operational ✅ Documentation: Available ✅ Chuck: Operational ✅

Condition: used, Year of construction: 1997, CNC Turning Center VDF Boehringer VDF 250 Cm (NO TAILSTOCK) General Manufacturer: VDF Boehringer Model: VDF 250 Cm Type: CNC slant bed turning center, chuck work Year: 1997 Serial no.: 1114.3705-24 Control: Siemens Sinumerik 840C Location: Korschenbroich, Germany Working area Swing over bed: 550 mm Swing over cross slide: 480 mm Max. turning length: 1,000 mm Tailstock: none (chuck work only) Hnsdpfxoz Rnrrs Akrou Main spindle Spindle nose: size 8, DIN 55026 Spindle bore: 103 mm Max. speed: 4,500 rpm C-axis: yes Axes X travel: 405 mm Z travel: 1,099 mm Rapid traverse: 10 m/min Feed range: 0.1 to 10,000 mm/min Turret 12 stations, VDI 50 (DIN 69880) Driven tools: yes, up to 2,500 rpm, 5.4 kW Driven tool torque: 25 Nm (standard), 100 Nm (low range) Clamping Hydraulic power chuck, special swivel chuck (Sonderschwenkfutter) Full hydraulic clamping cylinder Equipment Coolant system: 600 l tank, 5.5 bar, 60 l/min Chip conveyor: right-hand discharge Hydraulic unit: Hydrokraft Control cabinet: Rittal, with cooling unit Oil mist extractor: yes Pivoting operator panel Electrical 400 V, 3 phase, 50 Hz Main fuse: 125 A Operating current: 100 A Total connected load: approx. 50 kW Dimensions and weight Approx. 5,400 x 3,200 x 2,400 mm (L x W x H) Weight: approx. 10,500 kg Points to check before sending: Weight. The other listing says about 11,000 kg. I used 10,500 kg because that is what is written on the machine (“10,5 to.”). Chuck make. The listing names a Forkardt chuck. The marking on the chuck in your second photo looked like it could be Röhm, so it’s worth a quick look. resale Chip conveyor. It is not visible in the photos. Confirm it is with the machine. Control model. The 840C comes from the listing only. The screen photo doesn’t show it clearly.

Condition: excellent (used), Year of construction: 1985, functionality: limited functionality, Description Technical information Swing over bed 420 mm Distance centre tot centre 1000 mm Max longitudinal travel Z-axis 1028 mm Max cross travel X-axis 335 mm Spindle coneA2-6 Dia of spindle bore 56 mm Power on the spindle20/25 hp Number of speeds16 - 4000 rpm CommandMazatrol Cam T3 Total power needed18,5 kW - 32,9 kVa Length 3734 mm Width 1893 mm Height 2401 mm Weight 4400 kg Toolchanger yes Number of tools 16x - rotating yes milling tools C-axis Hsdpfjvk E Aysx Akrjnu Robo flex automatic loading system tooling included Measuring arm included MAZATROL CAM T-3 CNC Accessories Tailstock, Evoquator, Tool Attachments, Presetting Machine weight 4700 kg Axis C Yes

Condition: repair required (used), Year of construction: 1998, operating hours: 6,000 h, functionality: limited functionality, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 221 mm, total length: 2,500 mm, total width: 1,700 mm, type of input current: three-phase, overall weight: 3,750 kg, Equipment: documentation/manual, We are offering this Spinner TC46-MC CNC lathe, built in 1998, which requires repair. Hnodpfx Asz Ekq Eokreu The turret needs to be overhauled. The machine is powered on. Otherwise, it has no other defects. Serial number: 040235 Type: TC46-MC Voltage: 3 × 400 V Current: 50 A Frequency: 50/60 Hz We will gladly load the machine onto a truck for the customer using a forklift. All relevant documents for the machine are available, including the purchase contract, training materials, repair records, manuals, and maintenance information. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, Pinacho lathe Fagor CNC control Year 2003 Hnedpfx Aszqbpljkrju Good condition, video available.

Condition: used, Year of construction: 2008, Wagner WDE500 Lathe, Year 2008 Used lathe from Wagner Wagner WDE 500 cycle-controlled lathe Only approx. 1,700 operating hours Turning diameter: 500 mm Turning length: 1,500 mm Control: Siemens 802 C Swing diameter over cross slide: 280 mm Spindle bore diameter: 82 mm Number of controlled axes: 2 Speed range: 20-3,000 rpm Rapid traverse speed: 5 m/min Number of tool stations in turret: 1 Multifix "C" Tailstock: Yes, MT 5 Drive power: 7.5 kW Machine weight: approx. 3.0 t Dimensions (L x W x H): 3.3 x 1.7 x 1.7 m Cycle-controlled CNC lathe in good condition. Accessories: - Coolant system - Base holder - 3-jaw chuck - Various PARAT tool holders With original operating manual Hodpfx Akexlz Rxerjnu Fully functional, good condition as shown in the photos Viewing, collection and delivery available for a fee

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 1,250 mm, turning diameter: 620 mm, spindle bore: 120 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,275 mm, spindle motor power: 22 W, total height: 1,925 mm, total length: 3,980 mm, total width: 1,880 mm, overall weight: 7,600 kg, bar passage: 80 mm, spindle nose: JIS-A2-8, Equipment: documentation/manual, OKUMA SPACE TURN LB400-M – CNC TURNING CENTER OKUMA SPACE TURN LB400-M – a robust and powerful Japanese CNC turning and milling center designed for precision machining and series production of metal components. The machine is built on the proven OKUMA platform and offers high rigidity, reliability, and excellent performance for demanding CNC turning applications. The LB400-M version is equipped with driven tools and a C-axis, making it suitable for complex machining operations and allowing multiple machining processes to be completed on a single machine. MACHINE DATA Manufacturer: OKUMA Model: SPACE TURN LB400-M Type: CNC Turning & Milling Center Machine type: CNC Lathe / CNC Turning Center CNC Control: OKUMA OSP Number of axes: 2 + C-axis Turret: 12-position turret Driven tools: Yes C-axis: Yes Hydraulic chuck: Yes Coolant system: Yes Chip conveyor: [YES / NO] Tailstock: [YES / NO] Condition: Used / Good working condition MAIN FEATURES Robust Japanese OKUMA construction CNC turning and milling capability C-axis for complex machining operations Driven tooling 12-position automatic turret Hydraulic chuck High rigidity and stability Suitable for both single-part and series production Excellent machine platform for heavy-duty turning applications Machine available for inspection and testing Hnodpszwdw Ejfx Akreu The machine has a 3-year-old refurbished main spindle and X-axis.

Condition: excellent (used), XYZ SLX 425 x 1.25m CNC Lathe Year 2016 Serial number L769 ProtoTRAK SLX Distance between centres 1,250 mm Hedpfsz N Ambex Akronu Maximum cutting length 1,080 mm Swing over bed 480 mm Swing over cross slide 257 mm Swing in gap 700 mm Gap in front of faceplate 170 mm Cross slide travel 230 mm Spindle bore 80 mm Spindle nose D1-8 Camlock Spindle motor 7.5 kW / 10 hp Spindle speed range 25–2,500 rpm in 3 ranges Tailstock quill travel 160 mm Tailstock taper No. 5 Morse taper Tailstock quill diameter 75 mm Bed width 370 mm

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, We offer this used Okuma LB300 CNC lathe, manufactured in 2001. Manufacturer: Okuma Model: LB300 Year of manufacture: 2001 The condition is very good and meets the manufacturer's specifications. The machine is operational in our CNC turning shop and can be inspected at any time. All machines are under the manufacturer's service agreement. Last service in 2026. The following accessories will be included in the sale: Chip conveyor Extraction system Tool holder (available at an additional cost, negotiable) The machine is available for immediate delivery after consultation. Hodpfjz Rv Rvex Akrenu If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 250 mm, turning length: 500 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 500 mm, spindle motor power: 15,000 W, rotational speed (max.): 4,000 rpm, total height: 1,800 mm, total length: 4,000 mm, total width: 1,900 mm, quill travel distance: 210 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 20 m/min, overall weight: 5,000 kg, spindle nose: 6, Equipment: documentation/manual, rotational speed infinitely variable, CNC Fanuc 18i - T CAPABILITIES: Max. workable diameter from bar stock: 54 mm Max. workable diameter from chuck: 250 mm Max. workable length: 500 mm Max. rotating diameter: 520 mm MAIN SPINDLE: Rotation range: 40 – 4,000 rpm Spindle nose: ASA 6’’ Spindle bore: 80 mm Chuck diameter: 250 mm Motor power: 11/15 kW (50%) TAILSTOCK: Rotation range: 40 – 4,000 rpm Spindle nose: ASA 5’’ Hnedoz Ig Urepfx Akreu Spindle bore: 52 mm Chuck diameter: 165 mm Motor power: 5.5/7.5 kW (50%) BI-DIRECTIONAL TURRET: Number of positions: 12 Rotation time: 0.6 sec POWERED TOOLS: Number of positions: 6 Rotation range: 50 – 3,000 rpm Motor power: 3.7 kW (50%) C-AXIS: Type: CS (direct drive) Minimum programmable value: 0.001° Max. rapid traverse: 80 rpm AXES: X-axis travel: 210 + 5 mm Z-axis travel: 500 + 10 mm B-axis travel: 510 + 5 mm X-axis rapid traverse: 20 m/min Z-axis rapid traverse: 20 m/min B-axis rapid traverse: 24 m/min COOLANT: Tank capacity: 200 Lt Pump flow rate: 100 Lt/min DIMENSIONS: Overall dimensions with chip conveyor: 4,000 x 1,900 x 1,800h mm Weight with chip conveyor: 5,000 kg Machine complete with: • Drilling kit with tailstock on B-axis for simultaneous drilling and turning • 9 bar pump • Chip removal paddle L 150 mm • Monitoring system • Spindle bore 71 mm • Simple collet chuck, Morse taper 42 • Chuck diameter 165 mm • Instruction manuals and CE declaration

Condition: good (used), Year of construction: 2014, functionality: fully functional, CNC-controlled lathe with powered tools, chip conveyor, automatic tool measuring system, chip evacuation conveyor, and bar feeder. Put into operation 11/2014 Control system OSP-P300L CNC with a 15" color touchscreen Machine hours: Power-on time: 65,458 hours as of 03/18/2026, NC operating time: 36,054 hours Spindle rotation time: 19,533 hours Cutting time: 16,582 hours And increasing. Power consumption 33.1 kVA Technical data Max. swing diameter 480 mm (approx. based on the current chip conveyor design) Max. machining diameter 340 mm Max. turning length 785 mm Collet chuck + 10" hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) Hydraulic through-bore cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 interface, 80 mm bore, integrated motor Speed range 45 - 5,000 rpm Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001° increment Sub-spindle Speed range 50 – 6,000 rpm Power/continuous operation 11 kW/7.5 kW Spindle with 140 mm interface, 62 mm bore, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet chuck + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) Hydraulic through-bore cylinder SS1243, draw tube Sub-spindle travel - NC axis W travel for W450: 595 mm Spring-loaded part ejector from the sub-spindle Overload protection for W-axis (drive torque) Tailstock mounting in the sub-spindle Turret Number of tool positions 12, both fixed and powered BMT60 (not VDI) Tool mounting in. 25 x 25 mm Tool mounting out. diameter 40 mm Powered tools Drive power 7.1/4.1 kW Speed range 45 – 6,000 rpm Feed speeds Rapid traverse in X and Z axes 25/30 m/min Rapid traverse in C axis 200 rpm Travels X-axis 260 mm Z-axis 510 mm Y-axis 115 mm (+70 mm / -45 mm) Machine data Width 3330 mm – without bar feeder and chip conveyor Depth 1800 mm Height 2250 mm Machine weight 5,250 kg Accessories: OSP-P300L Advanced One Touch CF-M-E package including: Coordinate transformation function Profile generation function Advanced One Touch IGF 3D machining process simulation Cutting time overrun check Load monitoring (spindle, feed axes) NC operation monitoring (including part counting) Function for reducing cycle time Hi-Cut Pro function Spindle speed control function High-pressure coolant, max. 20 bar, max. 50 l/min Hjdpfsz Hk R Uex Akronu Bar feeder ILS type MUK 7012, with bar magazine 6-70 mm/1250 mm, year of manufacture 05/2014, manufacturer Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn. FILTERMIST FX4002 extraction unit Equipment for the machine: Collet chuck: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on the main spindle) Collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -29-30 31-32-34-35-36-38-39-40-41-42-44-45-46-48-50-51-53-55-57-60-64-6 5 Grooved collets diameter (mm) 55-60-65 Collet chuck: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on the sub-spindle) Collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -30 31-32-34-35-36-39-38-40-41 Tool holders: Axial holder - 5X Tool holder, turning - 5x Tool holder, boring bar - 2x Front-end drive, double-sided - 3x Front-end drive, side - 3x Reduction sleeve (manufactured from stock material) Reduction - nylon diameter (mm): 12-14-15.5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52 The machine is regularly serviced.

Condition: good (used), Hwacheon HI Eco 31A CNC Lathe, C Axis & Live Tools, Serial Number 1053444L45, Year 1998, Swarf Conveyor, Foot Pedal, Fanuc CNC Control, 2 Jaw & 3 Jaw Power Chucks, Tool Arm, Hsdpsz N A Avofx Akrsnu Tailstock, 10 Station Turret, Manuals, Toolholders, Transformer

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center 2 Axes: X, Z Model: TBI-520 Hedszqbkcopfx Akrenu CNC: Fanuc Year: 2002 Without Tailstock

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, turning diameter over cross slide: 630 mm, turning length: 4,000 mm, turning diameter: 950 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, travel distance X-axis: 535 mm, travel distance Z-axis: 3,845 mm, total height: 1,850 mm, total width: 2,105 mm, type of input current: three-phase, spindle nose: A2-15, Equipment: documentation/manual, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Hjdpez S Ncuofx Akrjnu Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret 2 x Fixed Steadies

Condition: good (used), Year of construction: 2002, Control system OSP U 100L, Swing over bed 530 mm, Swing over cross slide 420 mm Max. turning diameter 340 mm Turning length 1000 mm Travel X 260 mm Z 1020 mm Hnjdpoz Hwf Esfx Akrju C 0.001° Spindle speed (2 ranges) 38 – 3,800 rpm Spindle power 22/15 kW Spindle bore 80 mm Bar capacity 70 mm Number of tools in turret/driven 12/12, VDI 40 Driven tool speed 4,500 rpm, 5.5/3.3 kW, Chuck diameter 315 mm Machine dimensions 3310 x 1895 x 1925 mm, 6.000kg 3 pcs driven tool holders, 5 pcs fixed tool holders. Chip conveyor, Tailstock with hydraulic locking, Tool measuring equipment,

Condition: used, Year of construction: 1992, operating hours: 27,221 h, functionality: fully functional, machine/vehicle number: 474, turning diameter over cross slide: 240 mm, turning length: 800 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 4,000 rpm, total height: 2,005 mm, total length: 2,953 mm, total width: 1,990 mm, type of input current: three-phase, overall weight: 4,300 kg, Last maintenance performed by INDEX-Werke GmbH & Co.KG on September 29, 2025. Chuck diameter: 200 mm Main drive: 30 kW Speed range: 40-4000 rpm Spindle bore: 65 mm Turning diameter over cross slide: 240 mm Turning length: 800 mm Cross slide with turret Tool positions: 12 Slide travel, cross/longitudinal: 220/850 Hnjdpfx Akjz Ng I Asrju Powered tools: 6 Speed at the drive wheel: 4000 rpm Tailstock Arbor diameter / Arbor travel: 85 / 140 Mount according to DIN 228: MK5 Total power: 52 kW Machine weight: 4300 kg Dimensions (L/W/H): 2953/1990/2005 Technical data subject to change without notice. Errors and prior sale excepted.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Very well-maintained lathe with powered tools and a sub-spindle. Year of manufacture: 2004 Mazatrol 640T NEXUS control 500 mm between centers Max. turning diameter: 380 mm 2x hydraulic Kitagawa chucks Measuring arm Powered tools with VDI40 adapter (VDI tools are available at an additional cost) C-axis Sub-spindle Everything has been cleaned and is ready for use! Machine weight: approximately 5 tons Forklift available for loading the machine! Hedpfx Aoyx U Itskrenu Machine price: €29,950 excluding VAT (no tooling included) Machine + VDI40 toolholders (13 driven + 17 fixed): €36,500 excluding VAT This machine is available for inspection in Genk and can be powered on for demonstration!

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle speed (min.): 3,200 rpm, total height: 1,700 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 6,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA ES L II-M Year 2002 Hodoyna Uijpfx Akrsnu A small, very compact lathe with extensive capabilities. Control U-10L, parts catcher, touchsetter, V12 turret VDI 30— all driven positions, manual tailstock, chip conveyor, coolant pump, bar feeder Samsys MUS-3000 year 2007, including equipment, SMW chuck KNCS-N210-52, package with jaws and 24 tools optionally available.

Condition: excellent (used), Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012) Serial Number: 7264 Year: 2012 Control: Fanuc OiTD CNC Condition: Used – good working order Technical Specifications: Centre height: 725mm Swing over bed: 1450mm Swing over cross slide: 1000mm Distance between centres: 4000mm Main drive motor: 60 kW Maximum weight between centres (unsupported): 15,000 kg Spindle speed range: 1.9 – 560 rpm Features & Equipment: 2 x 3-point steady rests Handwheel Swarf conveyor 4-position hydraulic toolpost 4-jaw chuck Fanuc OiTD CNC control Hnedsxc In Sepfx Akreu

Condition: good (used), Year of construction: 2004, operating hours: 11,287 h, functionality: fully functional, turning diameter over cross slide: 370 mm, turning length: 1,000 mm, turning diameter: 350 mm, spindle bore: 62 mm, spindle speed (max.): 5,200 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Okuma LU300 MC-1000 Hodpsylpzaofx Akrsnu A-turret VDI40 with 12 positions, all driven (M-tools), B-turret VDI40 with 8 positions, Touch Setter for both A & B turrets, manual tailstock, chip conveyor, 8 bar coolant pump, extraction system, Samsys Multi-3000 bar feeder, chucks & tools available as options.

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, Pinacho Tour lathe Type SE 200 Year 2023 Fagor CNC Made in Spain Hsdpjz Ehx Tjfx Akrsnu Includes tooling Includes safety glasses Machine in like-new condition, with only 200 hours of use Exact Model: Pinacho SE 200-42 Ax1000/S1 Key Features: Only 200 hours of use Almost new condition

Condition: excellent (used), Year of construction: 2015, Okuma GENOS L200E-MY CNC Lathe Technical Data Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Voltage: 400 V Phases: 3 P Frequency: 50/60 Hz Connected load: 15.3 kVA Rated current: 25.6 A Short-circuit withstand capacity: 2.5 kA Max. turning diameter: Ø 200 mm Max. turning diameter x length: Ø 200 x 380 mm Swing over bed: Ø 450 mm Swing over cross slide: Ø 300 mm Workpiece weight (single-sided support): 120 kg Spindle diameter: Ø 100 mm Spindle nose: JIS A2-6 Spindle bore: Ø 66 mm Spindle speed range: stepless Spindle speed: 75 to 3000 rpm Number of tool stations: 12 Turret type: Multitasking V12 turret Tool holder, external turning tools: 20 x 20 mm Tool holder, internal turning tools: Ø 32 mm Rotating tool speed: 6000 rpm Travel (Z-axis): 400 mm Travel (X-axis): 165 mm Travel (Y-axis): 80 mm Feed range: 0.001 to 1000 mm/rev Rapid traverse Z-axis: 25000 mm/min Rapid traverse X-axis: 20000 mm/min Rapid traverse Y-axis: 10000 mm/min Tailstock quill diameter: Ø 55 mm Hedey R A N Ajpfx Akrenu Tailstock quill stroke: 80 mm Machine height: 2040 mm Footprint: 2120 x 1750 mm Machine weight: 4800 kg Year of manufacture: 2015 No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Condition: used, Dugard Eagle 300 Fanuc control 381mm 3 jaw chuck 77mm bore chip conveyor 10 station turret 700mm between centres Hsdpoz S Ah Dofx Akrjnu

Condition: used, Year of construction: 2008, operating hours: 18,349 h, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, Produced in 2008, cutting time 18,349 h, OSP P200L, 4-axis double turret VDI40, A-turret VDI40 V12 with live tools, B-turret VDI40 V8, turning diameter 340 mm, turning length 1000 mm, standard spindle bore, main spindle 4800 rpm, tailstock, manual, touchsetter, chip conveyor, coolant station, in good working and geometric condition, optional tools available. Hnodoyu N Uxspfx Akreu