Used Cnc Laser for sale (11,149)

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee! Ksdpfx Anjzu T Smjdena

Condition: used, Year of construction: 2011, machine/vehicle number: E1053A0497, overall weight: 850 kg, For sale is a TRUMPF TruDisk 4002 (4C) disc laser / laser source, including a separate KLH cooling unit RW 20/0 SK. Laser technical data: * Manufacturer: TRUMPF Laser GmbH + Co. KG * Type: TruDisk 4002 (4C) * Year of manufacture: 01/2011 * Laser power: 4,000 W * Equipment No.: E1053A0497 * Supply voltage: 380 V (-10%) to 460 V (+10%), 3 AC + PE * Frequency: 50–60 Hz * Connection power: 23 kW / 25 kVA * Rated current: 34 A at 400 V Knjdpfxszvqfyo Andoa * Protection class: IP54 * Weight: approx. 850 kg Cooling unit: * Manufacturer: KLH Kältetechnik GmbH * Type: RW 20/0 SK * Year of manufacture: 2017 * Part No.: E123223000AA * Serial number: 17KLH00670 * Voltage: 400/460 V * Frequency: 50/60 Hz * Refrigerant: R134a * Refrigerant quantity: 3.7 kg The TruDisk 4002 is offered together with the KLH cooling unit shown in the picture. Inspection is possible by arrangement. Further technical information and images can be provided upon request.

Year of construction: 2019, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 6, This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Application: Automated Laser Cleaning / Surface Treatment of Metal Components • Laser Source: cleanLASER CL600 • Laser Type: Q-switched Fiber Laser • Average Laser Power: 600 W • Wavelength: 1064 nm • Laser Class: Class 4 (Laser Source) • Complete System Classification: Laser Class 1 • Laser Optics: STAMP 25 • Scanner Type: 2D Scanner • Working Scan Field: Approx. 65 × 65 mm • Objective Lens: f = 163 mm • Red Positioning Laser: Yes • Pulse Frequency: Variable • Beam Delivery: Fully Aligned Beam Path • External Fiber Length: Approx. 8 m • Door Interlock Connection: Yes • Remote Diagnostics: TCP/IP / USB • Fieldbus Interface: Profinet • Software: cleanSTUDIO • Telediagnostic Software: CLL Remote Diagnostics • Robot Type: 6-Axis Industrial Robot • Robot Programming: Teach Mode • Robot Gripper: Single Part Gripper • Loading System: Manual Loading • Conveyor System: Bosch T2 Carrier System • Buffer System: Multiple Workpiece Carriers • Unloading: Automatic Conveyor • Conveyor Length: Approx. 2 m • Workpiece Carrier: Not Included • Designed Workpiece Types: 2 • Machine Footprint (W × D × H): Approx. 2,035 × 2,200 × 2,215 mm • Machine Frame: Welded Steel Base Frame • Cell Construction: Aluminium Profiles • Work Table: Aluminium T-Slot Plate • Front Door: Folding Door • Electrical Cabinet: Integrated Double Cabinet Kedpfx Anozuy Stjdena • Cabinet Width: 1,200 mm • Cabinet Depth: 800 mm • Cooling Requirement: External Water Cooling (

Year of construction: 2021, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC S7-1500, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 3, This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Laser Source: cleanLASER CL600 Mid-Power Laser • Laser Type: Diode-Pumped Solid-State Laser (DPSSL) • Laser Wavelength: 1064 nm • Laser Operation Mode: Pulsed (ns) • Average Laser Power: 600 W ±5% • Alignment Laser Wavelength: 658 nm • Alignment Laser Power: 28 mW • Cooling System: Integrated Water-to-Water Cooling System • Additional Chiller: Cooler ONE Plus Air (Air-Cooled) • Fiber Cable Type: Quartz Fiber Optic Cable • Fiber Length: 10 m • Fiber Geometry: Square • Protective Hose Diameter: 21 mm • Optical System: STAMP 25 2D Optics • Optics Connection: 90° • Focal Length: 163 mm • Control Unit Brand: Siemens • Control Unit Model: SIMATIC S7-1500 PLC • Drive System: Siemens 1FK7 Servo Drives • Linear Axis System: 3-Axis Portal System • Maximum Axis Payload: Approx. 25 kg • Axis Speed (X/Y): >200 mm/s • Communication Interface: Profinet • Digital I/O: Standard • Software: cleanSTUDIO / cleanCONTROL • Industrial PC: 19" Rack PC • SSD Capacity: 256 GB • RAM: 8 GB • Processor: Intel Core i5 (minimum) or equivalent • Robot: ABB Robot • Gripper: 2-Workpiece Gripper • Conveyor System: Bosch TS2 Transfer System • Loading System: Manual Workpiece Carrier Loading • Discharge Conveyor Length: Approx. 4.8 m • Extraction System: ULT Maxi Plus • Fan Capacity: Max. 4,000 m³/h Knsdpfx Aozuy Inendsa • Maximum Pressure: 3,300 Pa • Filter Cartridges: 4 × 600 mm • Dust Drum Capacity: 200 L • Extraction Power: 5 kW • Power Supply: 400 V, 3-Phase

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, type of input current: AC, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Kjdpfx Aeyxccrendjna Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Kedpot Dig Eefx Andjna The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral cantilevers for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus function for automatic determination of the focus distance - marking software EZCAD - Pilot laser (simple preview, clear text preview) - focus finder (easy focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with operating system Windows - dimensions: 800x 600 x 1660mm (LxWxH) - Weight: approx. 80 Kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 3,000 h, number of axes: 5, number of slots in tool magazine: 24, We are offering this well-maintained, young COSMEC 5-axis CNC milling machine, model CONQUEST 515, from 2021. The machine is currently in production and operates on a single-shift basis. It can be inspected and tested while powered on. - Training/instruction for your employees can be provided at our facility before the machine is disassembled. - Year of manufacture: 2021, commissioning date: 05/2021 - Work table: 4000mm x 1500mm - OSAI control system - 24-position tool changer (2 disks with 12 tools each) - Portal clearance: 500mm - 5-axis swivel head: 18KW, 500 - 24,000 RPM - NC-controlled extraction hood - Bumper safety system - Control cabinet with air conditioning unit - Mobile control panel - Central lubrication system - Vacuum pump: 250 m³/h Knodozukurepfx Andoa - Approximately 24 HSK63F tool holders - Automatic tool length measurement - Nesting table - Nesting CNC milling machine - Swivel machining is possible The price is "Ex Works". We will gladly assist with disassembly and loading. Similar to Reichenbacher Vision or Homag CNC. If you have any questions or would like to arrange a viewing, please feel free to contact me by phone or email.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 22-7254, functionality: fully functional, operating hours: 30 h, power: 2.2 kW (2.99 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,010 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 3,500 mm, workpiece width (max.): 2,200 mm, workpiece weight (max.): 300 kg, number of axes: 3, number of slots in tool magazine: 1, controller manufacturer: Kinetic-NC, actuation type: electric, total height: 1,900 mm, total length: 3,700 mm, total width: 2,700 mm, overall weight: 1,200 kg, table length: 3,500 mm, table width: 2,200 mm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, CNC-Step RaptorX-SL 3200/S20 gantry CNC router (2018) – approx. 30 operating hours, production-ready Immediately available CNC gantry router from CNC-Step, built 2018, in as-new condition. The non-resettable hour meter reads only ~30 hours – the machine is practically unused and shows no wear. Originally commissioned by CNC-Step (OEM). Largest standard model of the RaptorX-SL range: travel 3200 × 2010 × 300 mm, clamping area approx. 3.5 × 2.2 m, variable bridge height 150/300/400 mm. Heavy steel frame, Hiwin/Bosch Rexroth linear guides, planetary-geared drive with Benezan BEAST stages – rigidity and repeatability for professional continuous use (furniture/interior fit-out, sign-making, model/prototype work, composites). Fully production-ready, incl.: • Teknomotor Ceramic spindle 2.2 kW (18,000–24,000 rpm, ER25, air-cooled) • KinetiC-NC control with unlimited full-version license (transferable) Knedpfx Aozfv T Ijndea • Vectric VCarve Pro license • PC, monitor, handheld pendant • Extensive tooling package (ER25 collets Ø2–15 mm, solid-carbide cutters, Ø60 Tornado face mill) • 400 V three-phase connection Technical data: • Travel X/Y/Z: 3200 × 2010 × 300 mm • Spindle: Teknomotor Ceramic 2.2 kW, 18,000–24,000 rpm, ER25, air-cooled • VFD: Toshiba VF-nC3 • Drive: stepper motors + planetary gearing, 4× Benezan BEAST • Guides: Hiwin / Bosch Rexroth 20 mm • Control: KinetiC-NC (CncPod, Ethernet) • Power: 400 V three-phase (CEE) · Weight: approx. 1,160 kg • Serial number: 22-7254 Original 2017 invoice available (buyer data anonymized). Base-machine list price: €28,198 net (€33,555.62 incl. German VAT) – excluding spindle and VCarve license. Here fully equipped for a fraction of that. Live demonstration under power by appointment. Collection, dismantling and transport by arrangement. Location: Oploo (NL). Price: €17,000 net (excl. VAT)

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 21032017, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, travel distance Z-axis: 200 mm, table length: 3,100 mm, table width: 2,100 mm, For sale: CNC milling plotter from Polska Grupa CNC. In continuous operation, ready for immediate use. Used for machining chipboard, MDF boards, kitchen countertops, and compact countertops. A used vacuum system (vacuum pump with reservoir) is also included with the plotter. Key information and technical condition: Model: 2030 Special Year of manufacture: 2017 Power: 8kW Spindle power: 5.5kW Spindle: Brushless electric spindle, liquid-cooled in a closed system Spindle speed: 6000 - 24000 rpm Power supply: 400V (3 phases) 50Hz Working area: 2100mm x 3100mm Kodpfxszvykrj Andjna Z-axis range: 200mm Condition: very good, ready for immediate use Usage history: operated in a single-shift mode, 8 hours per day.

Year of construction: 2020, condition: ready for operation (used), A handheld pulse laser cleaning machine is available. Laser source: Raycus RFL-P200, laser power: 200W, cooling medium: water, frequency: 50kHz, max. speed: 10m/s, max. cleaning width: 50mm. The machine is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible. Kedpfx Anezfaaxjdjna

Condition: ready for operation (used), Year of construction: 2023, Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without computer, to be provided by the customer, Extraction unit: 2x extraction fans 5.5kW each, Scanner: Manual barcode scanner, Unwinding device: for material rolls with unwinding bar, Unwinding system: Connection available. The system was only installed and approved, series operation did not take place. On-site inspection is possible, documentation available. Kedpfxjwbuzfj Andjna

Year of construction: 2007, condition: ready for operation (used), A 3D metal printing machine Concept Laser GmbH in need of repair is available. Technology: Laser melting (SLM)/LaserCusing, working dimensions X/Y/Z: 250mm/250mm/280mm, layer thickness range: 20µm-80µm, max. scanning speed: 6m/s, focus diameter range: 50µm-500µm, laser power: 200W, printing materials: stainless steel/aluminum/titanium/nickel-based alloys/cobalt-chrome. Machine dimensions X/Y/Z: approx. 2450mm/2400mm/1650mm, weight: approx. 2000kg, laser cabinet dimensions X/Y/Z: approx. 600mm/1200mm/1200mm, weight: approx. 180kg, blower dimensions X/Y/Z: approx. 550mm/1450mm/550mm, weight: approx. 70kg. Including various printing materials such as titanium plates, steel plates and aluminum alloys. The machine has CF card defects and the communication between laser GUI and RCU breaks down. Documentation available. On-site inspection is possible. Knjdpjww Ivnsfx Andja

Year of construction: 2013, condition: ready for operation (used), An IPG laser source with peripheral equipment is available. 1) IPG Laser YLS-3000-CT, year of manufacture: 2013, wavelength: 1070nm, modulation: 0kHz-5kHz, power control range: 10%-100%, power stability: +/-1%. Machine dimensions X/Y/Z: approx. 800mm/800mm/560mm, weight: approx. 400kg. 2) Industrial chiller IPG Laser LC 170.01-A.3.5, year of manufacture: 2013, cooling capacity: 17kW, max. operating pressure: 28bar, refrigerant: R407C, refrigerant quantity: 3.5kg. 3) Wire feeder Dinse DIX WD 300, feed rate: 20m/min, wire diameter range: 0.8mm-1.6mm, machine dimensions X/Y/Z: approx. 300mm/250mm/250mm. 4) Laser process head. Documentation available. On-site inspection is possible. Knedpfx Ajx H S Nwendja

Condition: used, functionality: fully functional, Oil mist extraction for CNC machines, Agfa / ABSOLENT separator filter Fan power: 0.63 kW Inlet diameter: 160 mm Capacity up to 500 m3/h New main filter cartridge The Agfa / Absolent filter is one of the most efficient oil mist and oil fume filters in the world. Ksdpfx Aozva Tmjndena It has very low maintenance requirements and can operate for several years without filter replacement, resulting in very low operating costs. Due to its design and large filter surface area, it offers both a long service life and consistently high separation efficiency. Thanks to its design, the filter can operate continuously and without interruption. The liquid collects at the bottom of the filter and can be reused.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, laser type: fiber laser, laser power: 80,000 W, table length: 31,500 mm, table width: 6,300 mm, travel distance X-axis: 4,050 mm, travel distance Y-axis: 25,050 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 55,000 kg, total length: 34,000 mm, total width: 12,000 mm, Equipment: cooling unit, safety light barrier, Working area (mm) : 26000×3500（Bevel cutting：25500×3000） X axis travel distance (mm): 4050 mm Y axis travel distance (mm): 25050 mm Z axis travel distance (mm): 450 mm X/Y axis positioning accuracy : ±0.03 mm/m X/Y axis repeat positioning accuracy: ±0.02 mm Max. synthetic positioning speed: 110m/min Max. acceleration: 1.2 G Kodpfx Anov E Hwzjdsna It can support cutting of various groove types such as V, Y, X, etc., with a maximum groove of ±45° and one-time forming, reducing the number of beveling processes, reducing costs and increasing efficiency.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, 3015H high-speed laser sheet metal machine High speed enables efficient processing 1.5G acceleration 50%–100% increase in thin sheet processing efficiency 7Hz low-pass filtering Enables high-speed, high-precision cutting of complex shapes Over 50% improvement in fine processing efficiency High speed and high efficiency drive high productivity Our high-speed cutting machine features a dual-station high-speed shuttle table Achieves 15-second fast parallel exchange Loading/unloading and cutting processes run simultaneously without interference significantly boosts processing efficiency Doubles output per unit of time Crafted with care for eco-friendly design Equipped with zoned dust extraction Features 8–30 fully automatic high-power negative pressure extraction systems Smooth smoke discharge and excellent dust removal efficiency Knsdowvpcmopfx Andsa In terms of safety, our high-speed machines are more considerate Standardized with an industry-unique intelligent anti-collision human detection system Includes door interlock protection and motor torque detection Ensures safe production Designed to reduce the workload in sheet metal processing Equipped with a fully automatic lubrication system A total of 16 automatic lubrication points across the XYZ axes Extends component lifespan by 300% Delivers higher running precision with lower maintenance costs

Condition: not inspected (used), A used Videojet Laser marking System - untested but removed from a Pharma production facility and was in operation - includes a Bofa AD Oracle Laser Fume extractor Ready to Ship Worldwide Export Documentation included Kedpfoznt Hwsx Andona

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser type: fiber laser, laser source manufacturer: Max Photonics, laser source model: MAX 6 kW mit CE, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, positioning accuracy: 0.3 mm, repeat accuracy: 0.3 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 8,000 kg, total length: 8,500 mm, total width: 3,500 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber Laser Cutting Machine 1530, 12 kW – Overview Safety & Protection Fully enclosed metal protective chamber with radiation-resistant doors and windows. Environmentally friendly and safe for operators. Work Platform High- and low-positioned parallel platform: Front end: laser cutting. Rear end: loading and unloading. No mutual interference → increased work efficiency. Machine Structure 10 kW bed structure: Time-segmented, zoned dust extraction. Superior heat dissipation, resistant to thermal effects. Industrial auxiliary equipment: air conditioning, special cooling system, constant temperature & humidity → stable performance & longer service life. Precision Assurance: Bed processed by large gantry milling machine. Industrial-grade guide rails, racks, ball screws. Full servo drive, double-sided dual drive. High industrial quality and precision. German assembly technology: Precision calibration with laser interferometers Fine craftsmanship, easier maintenance. Control & Software FSCUT 6000 control system (included). FSCUT software suite: Market-proven, safe, and user-friendly software. Supports smart networking. Professional nesting software: CypNest (included). Core Components Laser cutting head BOCI BLT442 Laser source MAX 6 kW, CE certified Water chiller HANLI 6 kW Guideway TAIWAN DTX 30+20+20 Frame TAIWAN JT Reducer Germany Techmach Cameras (2 pcs) Knjdpjy R I Nhsfx Andea Servo motor BOCHU Proportional valve Felton Electronic components SCHNEIDER Triple air inlet: nitrogen, oxygen, air Lubrication system: automatic oil supply system Accessories 30 protective lenses, 30 nozzles, toolbox. Optional: air compressor ARS-30HP-XF-1,6 MPA, dust collector 7.5 kW.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 250506-mxa-03, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Raytools, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 1,500 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 600 mm, working length: 3,000 mm, working width: 1,500 mm, cutting speed: 5,000 mm/min, input voltage: 380 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 2,400 kg, total length: 4 mm, total width: 3 mm, total height: 2 mm, warranty duration: 3 months, air pressure: 16 bar, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, Fiber laser metal cutting machine — 1500 W MAX Photonics (Senke SKL-1530F) Brand new, unused — still sealed in original factory export packaging (0 operating hours). Immediately available. High-precision, long-term stable and affordable fiber laser cutting for professional sheet-metal work. Ideal for metal fabrication shops and repair workshops. Delivered as a complete, ready-to-run package. Complete package — key features: ● MAX Photonics fiber laser source, 1500 W ● DELTA servo motors & drives (1500 W X/Y, 400 W Z) Ksdpjztn N Dsfx Andsna ● Raytools control system with RayTools BM110 cutting head ● Large 1500 x 3000 mm working area (fits a full standard sheet) ● Open-frame design — easy access and loading of oversized plates ● Reinforced, stress-relieved welded steel bed for lasting dimensional stability ● Taiwan YYC gear rack + HIWIN 25 square rails + TBI ball screw (Z) ● Positioning speed up to 150 m/min · cutting speed up to 7 m/min (material/thickness dependent) ● S&A industrial water chiller ● France Schneider electrics · SMC pneumatics · France Motoreducer · automatic central lubrication ● Included air compressor (15 kW, 1.6 MPa, 340 L tank) — enables low-cost cutting with compressed air, so bottled nitrogen/oxygen is reserved only for jobs that require it. Lower running costs and greater gas autonomy from day one. ● Included 30 kVA voltage stabiliser — stable power supply, protects the electronics ● Included spare consumables: 100 protective lenses + 100 copper nozzles — full starter set of wear parts Materials: carbon steel, stainless steel, aluminium, brass and other sheet metals — sheet-metal processing, auto parts, metal crafts, chassis/cabinets, kitchenware and similar industries. Sales exclusively to commercial businesses. Machine located in Jõhvi, Estonia — viewing by appointment; INCOTERMS: EXW

Condition: excellent (used), Year of construction: 2014, operating hours: 11,065 h, functionality: fully functional, machine/vehicle number: 03001212-03.14, The ALPHA LASER ALM 200 laser welding machine was manufactured in Germany by Alpha Laser GmbH in 2014, but it has been in operation since 2017. This mobile laser welding machine is equipped with a 200 W laser source (9kW laser beam power), enabling the repair and modification of various components such as dies, molds, injection molds, tools, and machine parts in any selected location. Welding is performed in a semi-automatic mode. The mobile laser welding system features a narrow laser head, allowing access to the interior of the welded component. It is controlled via a computer, joystick, and foot switch. The machine is in very good technical and visual condition and has been regularly serviced. The machine comes with a table. Price: 170,000 PLN net (VAT invoice provided). Technical parameters of the ALPHA LASER ALM 200 laser welding machine: – Power: 200 W – Wavelength: 1064 nm – Travel speed (X, Y, Z): 0-25 mm/s Kjdpfx Anetqtrfsdsna – Travel range (X, Y, Z): 140 x 120 x 1300 mm – Pulse energy: 90 J – Pulse duration: 0.5-20 ms – Pulse frequency: 100 Hz – Laser beam power: 9 kW – Laser beam diameter: 0.2-2.0 mm – Operating mode: Pulsed – Focal length: 150 mm – Power consumption: 380 V/ 50-60 Hz / 16 A/8kW – External dimensions: W-1410 x D-730 x H-1585 mm – Machine weight: approx. 320 kg – Operating hours: 11065 – Serial number: 03001212-03.14 Additional parameters and equipment of the ALPHA LASER ALM 200 laser: – Optics: LEICA microscope mount, 10x magnification, optionally 16x – Display with keyboard – Multifunctional foot switch – Joystick – Adjustable laser arm – Complete workstation with table – Option to purchase spare parts for the machine and accessories at a good price, e.g., lamps, hoses, wire guide holders, spheres/bases for parts, magnets, etc. – Option to purchase various types of welding wires at good prices – Option to purchase a fume extraction system

Condition: excellent (used), Year of construction: 2012, - 3-axis CNC center SCM Pratix S - model PRATIX 12B from 2012. - Range X, Y, Z axes: 2500x1250x150+ mm - Number of tool spaces in the magazine: 8 - Machine table: Raster aluminum table, 2 sections. - Control: PC control - Software: SCM NESTING, SCM XILOG MAESTRO - Serial no.: AH/115920 Number of milling axes: 1 Kedsuu Ntgopfx Andona Drilling unit: 1 - practically unused Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Main engine: 6.6 kW Table measurements: 130 cm x 260 cm Portal construction: Machine with movable portal Vacuum pumps: 2 pcs. BECKER from 2012 - one placed outside, the other installed in the machine. Vacuum pump capacity m³/h: 240/280 m³/h. Interface for reading CAD format (.dxf) Security: Rejects Weight approx. 2,500 kg Length: 5,900 mm Width: 2,790 mm Height: 2,190 mm Automatic tool length measurement

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 2 h, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: water, warranty duration: 12 months, laser wavelength: 355 nm, input frequency: 50 Hz, Equipment: cabin, UV laser engraving machine with 20-watt laser power Laser source with 355nm wavelength / 20 watts Exhibition machine, with approximately 2 hours of operation - No discernible signs of wear Knjdpfoflrnaox Andsa - Includes rotary axis - Includes Windows 64-bit PC system - Includes 22" monitor - Everything is fully installed and calibrated - Engraving software in German - 3D software (MM3D) - Very easy to operate - Simply turn on and start - UV laser source with 20 watts for high-contrast and fast marking with extremely high resolution - Engraving on virtually all metals (stainless steel, brass, aluminum, etc.) - Engraving on virtually all plastics (including PVC, silicone, etc.) - Engraving on real glass (including crystal glass) - Cutting of real glass is possible - Heavy-duty industrial quality - Complete system / ready for immediate use - Work area approximately 500 x 600 x 600 mm (L x W x H) - Clamping surface with mounting threads in a 50mm grid - LED work area lighting - 50mm pipe connection for fume extraction - Engraving area approximately 150x150 / 200x200 / 300x300 (switchable) - 3D scanner for marking surfaces of any shape - Includes foot switch to start the engraving process Sales are exclusively to commercial businesses. Delivery / Consultation / Sales only in Germany / Austria / Switzerland Please also note our attractive leasing/hire purchase offers. Machine dimensions approximately: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 180kg

Condition: used, Year of construction: 1998, functionality: fully functional, On offer: BIESSE ROVER 20 CNC machining center – 3 axes, working area 2893 × 950 mm. The machine is used, has undergone a comprehensive technical inspection and extensive service work, and is fully functional and ready for operation. It can be started and thoroughly inspected at our company's premises before purchase. Knsdpfxezucbqs Andoa The machine's greatest advantage is its extensive machining capabilities and the modernization of the electrical system and CNC control. The center features an ISO 30 electrospindle, a 10 + 6 spindle drilling head, and a saw unit, enabling milling, drilling, grooving, pocketing, and contour machining. Specifications: • Manufacturer: BIESSE • Model: ROVER 20 • Year of manufacture: 1998 • Number of axes: 3 • Working area X × Y: 2893 × 950 mm • 6 adjustable, pneumatically locking work beams • 12 vacuum cups • Pneumatic front and side stops • Main electrospindle: 3.6 kW, ISO 30 • Saw unit • Drilling head: 10 vertical + 6 horizontal spindles • New X/Y/Z axis servo drives: 3 × 1.0 kW • Vacuum pump: 3.0 kW • CNC controller: ESP32 • System: grblHAL / OpenBuilds CONTROL • Computer connection: USB • Dust extraction port: Ø200 mm • Total power: 9.6 kW • Overall dimensions: approx. 380 × 155 × 205 cm Service work performed: • Replacement of electrospindle bearings • Vacuum pump inspection and impeller replacement • Inspection of the pneumatic system and leak removal • Installation of 3 new X/Y/Z axis servo drives • New electrical system and CNC control installation Application: • Production of furniture, fronts, doors, and interior design elements • Machining of MDF, plywood, and furniture boards • Milling and contour machining • Vertical and horizontal drilling • Grooving and pocketing Additional information: • The machine does not require a dedicated computer – control is possible via a computer through USB • Currently operating on ESP32 with grblHAL and OpenBuilds CONTROL • It is possible to use a different CNC system, e.g., PikoCNC or UCCNC • Upon request, we can configure another system – the estimated cost of work is approximately PLN 4,000 + license, controller, and any components • Manufacturer's documentation in Italian • The photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price quoted in the auction applies to export/WDT sales with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We organize transport using the MDD fleet or through external carriers • We assist in obtaining leasing or a leasing loan • The delivery cost depends on the destination and the method of machine transport.

Condition: new, Year of construction: 2026, Working area: X - 2100mm, Y - 3000mm Z axis clearance: 300mm Worktable type: hybrid, i.e. vacuum + mechanical rails Number of vacuum sections: 6 Maximum working speed in slow motion: up to 40m/min Maximum Working speed: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm 9kW electrospindle, 24,000 rpm with full ceramic bearings Becker VTLF 2.250 vacuum pump Drive: Full Leadshine AC servo drives with 1500W power and high holding torque (double on the Y axis) Drive transmission: High-precision NIDEC SHIMPO planetary reducers Drive system: 30mm PMI linear guides and carriages with helical inclined strips with maximum contact area Guide lubrication system: Automatic Tool length measurement system: Automatic Control system: NK-105 G3 controller Standard CAD/CAM software: Artcam Open 2016 Optional CAD/CAM software: Vectric Cut 2D PRO (Ramp access function, automatic nesting) - additional cost PLN 2,000 net Power supply: 3PH, 400V, 50-60Hz Fire-rated wiring, bendable and protected against deformation Knodezr D Nwjpfx Andsa Machine dimensions: 4835 x 2900 x 2205mm

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, laser wavelength: 1,070 nm, Equipment: cabin, Laser engraving machine with 30-watt laser power - Exhibition machine / used demonstration unit with approximately 1 hour of use - Worth taking a look - Includes Windows 11 PC 64-bit (including monitor, keyboard, and mouse) - Fully installed and adjusted - Engraving software in German - Very easy to operate - Simply turn on and start - Fiber laser source with 30 watts for high-contrast and fast markings with very high resolution (see images) - Wobble function, e.g., for cleaning metal components - Deep engraving up to 3 mm possible - For engraving on many metals (stainless steel, brass, aluminum, etc.) and many plastics - Heavy-duty industrial quality - Complete system / ready for immediate use - Work area approximately 390 x 270 x 350 mm (L x W x H) - Clamping surface with fastening threads in a 50 mm grid - LED work area lighting - 50 mm pipe connection for smoke extraction - Engraving area up to 170 x 170 mm - Motorized adjustment of the focus position - Includes foot switch to start the engraving process Please also note our attractive leasing/hire-purchase offers. Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approximately: Kedpfxsd Ha I So Andsna Width: 450 mm Height: 800 mm Depth: 750 mm Weight: approximately 80 kg