Used Combined Timber Frame Assembly Station for sale (20,302)

Condition: used, Technical Commercial Datasheet – Integrated KAESER CSDX 165 T Air Compressor Station Manufacturer KAESER KOMPRESSOREN (Coburg, Germany) Type Complete "All-in-One" industrial compressed air station, featuring a fluid-injected rotary screw air compressor with variable speed control (CSDX Series), an integrated refrigeration air dryer (Module T), and an advanced SIGMA CONTROL 2 electronic monitoring configuration. Industrial Applications Continuous, high-efficiency plant air generation for automated manufacturing facilities, heavy assembly lines, packaging plants, plastics processing, and automotive industries. The variable speed drive system matches actual compressed air consumption in real time, eliminating peak starting currents and optimizing plant energy performance. Key Technical Specifications * Main Compressor Unit: KAESER CSDX 165 T (CSDX Series / Integrated Dryer Version) - Technology: Fluid-injected rotary screw compressor featuring premium SIGMA Profile rotors - Regulation System: Variable speed control via an integrated frequency inverter (SFC / Sigma Frequency Control) - Nominal Motor Power: 90 kW - Air Flow Range: Dynamic adjustment based on plant load profile (up to approximately 16.15 m3/min maximum capacity) - Maximum Working Pressure: 8.5 bar max (Current digital setpoint displayed: 7.5 bar) - Integrated Air Dryer (Module T): Refrigeration air dryer utilizing eco-friendly R-513A refrigerant (2.6 kg charge), with a maximum pressure of 32 bar on the cooling circuit side. - Electrical Requirements: 400 Volts / 3-Phase / 50 Hz Hsdpfezcaufox Aqgsfn - Control Interface (SIGMA CONTROL 2): - Total running hours: 26,805 h - Hours under load: 15,272 h - Current system pressure: 0.00 bar (at standstill) / Internal package temperature: 24 °C Machine Utilization This KAESER CSDX 165 T workstation draws ambient atmospheric air and compresses it through its high-efficiency 90 kW fluid-injected screw airend. The frequency inverter continuously regulates the engine speed to prevent the unit from wasting power during low-demand windows. Saturated, hot compressed air exiting the screw block is directed straight into the built-in refrigeration dryer module (Module T). The dryer chills the air stream down to its pressure dew point, condensing and safely discharging moisture to deliver clean, dry, and precisely regulated air to the factory floor line. System Highlights * Compact All-in-One Workstation Footprint: By enclosing the compressor and the refrigeration dryer unit inside a single acoustically insulated cabinet, the station significantly reduces necessary floor space, transport overhead, and engineering installation costs. - SFC Variable Speed Energy Efficiency: The dynamic matching of motor output to actual pneumatic network demand ensures a highly optimized electrical power factor and an exceptionally competitive cost per cubic meter of air. - Intelligent SIGMA CONTROL 2 Management: This interface monitors all critical operating metrics (pressions, temperatures, and maintenance schedules), ensures advanced industrial network compatibility, and confirms a healthy machine history with low un-loaded idling hours (only 43% idle time relative to total run metrics). - Future-Proof Eco-Refrigerant: The integration of R-513A refrigerant meets strict international F-Gas environmental guidelines, securing the long-term operational legality of the cooling loop without risks of sudden regulatory phase-outs.

Condition: excellent (used), Year of construction: 2023, Jungheinrich charging station for forklifts 4 x charging stations, maintenance stand for battery maintenance If you use electric forklifts in your operations, they rely on accumulators or batteries as an energy source. By installing a battery charging station, you will benefit from a compact solution that significantly simplifies the charging of accumulators. Hfodpfx Aqoy Nx Hnegon The system serves as a charging station for forklifts (such as pallet trucks). It has four charging bays with Tecna spring-loaded cable retractors that keep the charging cables in position. Construction: The yellow steel structure comprises a metal frame with an integrated impact guard at the base to protect the system from damage caused by vehicles. Spring-loaded cable retractors are mounted on top, enabling ergonomic handling of heavy cables. Jungheinrich battery charging station for floor mounting Year of manufacture: 2023 Without chargers "Everything from a single source: We would be happy to offer you suitable financing for your project." You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, AZO GmbH big bag discharging station with metering screw and vibrating base Includes buffer silo, vibrating base, and metering screw with end gate. Includes platform and staircase. Includes filter housing with dust extraction system, 1500 m³/h. Frame made of coated steel. Hfsdpez Hc T Ijfx Aqgon Big bag discharging station entirely made of stainless steel. See our other listings.

Condition: excellent (used), Year of construction: 2023, Jungheinrich charging station for material handling equipment Industrial charging station, maintenance stand for battery maintenance If you use electric material handling equipment in your operations, it relies on accumulators or batteries as its energy source. By installing a battery charging station, you will benefit from a compact solution that significantly simplifies battery charging. The system serves as a charging station for material handling equipment (such as forklifts). It features a charging bay with a Tecna spring-loaded cable reel to keep the charging cable in position. Construction: The yellow steel structure includes a metal frame with an integrated bumper at the bottom to protect the unit from damage caused by vehicles. Spring-loaded cable reel for ergonomic handling of heavy cables. Jungheinrich battery charging station for floor mounting Year of manufacture: 2023 Without charger Hfedpfx Aey Nx E Rsqgjn "Everything from a single source: We would be happy to offer you suitable financing for your project." You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2023, Jungheinrich charging station for forklifts 2 x charging station, maintenance stand for battery maintenance If you use electric forklifts in your operations, they rely on accumulators or batteries as their energy source. By installing a battery charging station, you will benefit from a compact solution that significantly simplifies the charging of accumulators. The system serves as a charging station for forklifts (such as reach trucks). It has two charging bays with Tecna spring balancers that hold the charging cables in position. Construction: The yellow steel structure comprises a metal frame with an integrated bumper guard at the bottom to protect the system from damage by vehicles. Spring balancers are mounted at the top, enabling ergonomic handling of heavy cables. Jungheinrich battery charging station for floor mounting Year of manufacture: 2023 Hedpey Nxwmjfx Aqgefn Without chargers “Everything from a single source: We would be happy to offer you suitable financing for your project.” More items – new and used – can be found in our shop! International shipping costs upon request!

Condition: excellent (used), Year of construction: 2023, Jungheinrich charging station for forklifts Hfodpfx Asy Nxuloqgjn Industrial charging station, maintenance stand for battery maintenance If you use electric forklifts in your operation, they rely on batteries as their power source. By installing a battery charging station, you benefit from a compact solution that significantly simplifies battery charging. The system serves as a charging station for forklifts (such as lift trucks). It features three charging bays with Tecna spring balancers that keep the charging cables in position. Construction: The yellow steel structure comprises a metal frame with an integrated bumper guard at the bottom to protect the system from damage caused by vehicles. Spring balancers are mounted at the top, enabling ergonomic handling of heavy cables. Jungheinrich battery charging station for floor mounting Length: 4.15 m Width: 0.70 m Height: 2.30 m Year of manufacture: 2023 Without chargers “Everything from one source: We would be happy to offer you suitable bank financing for your project.” More new and used items can be found in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, A complete production line for round timber processing, featuring frame saw technology as its core. The line is capable of processing logs with a top diameter of 15 cm and a butt diameter of up to 55 cm, in lengths from 2.5 to 9.5 meters. The technology consists of: 1) Log cascade for timber up to 10 meters in length, with dosing system 2) G710 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 55 kW electric motor Hfedpfxjxa Etts Aqgon - Detailed description available in a separate file - The frame saw is followed by roller conveyors - Main lumber is returned via conveyors and directed to the second frame saw - Side boards are continuously transferred to the cascade, which delivers them to the edging center 3) G560 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 45 kW electric motor - Detailed description available in a separate file - The frame saw is followed by a roller conveyor directing side boards to the cascade of the edging center - Main lumber is extracted immediately after being sawn, placed onto a carriage on rails, and, after package completion, pulled out of the sawmill using a winch 4) Edging center, Strojírny Loučná n. Desnou - Maximum cutting height 26 mm, cutting width 70 – 370 mm, total power consumption 29.2 kW - Detailed description available in a separate file - Side boards are dosed into the edging center via the vertical cascade - If required, boards are first cut to the desired production length, which can be set to fixed values or optimized for yield maximization - After cross-cutting, boards are edged to fixed widths in order to maximize lumber yield. Edged boards are then automatically transported via conveyors into storage bins according to their cut length. The final product is width-unsorted side lumber, typically with a width of 80 mm or more.

Condition: used, Year of construction: 1995, color: yellow, mileage: 1,001 km, first registration: 01/1995, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, Body: Roll-off frame with hydraulic station and fifth-wheel plate Mercedes Benz V8 engine ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hfedpfx Aqepiu U Eogen - .

Condition: new, Year of construction: 2026, Combination saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel 2250 mm) Large rip fence frame (900 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm, featuring professional stop flaps Max. saw blade diameter 315 mm with scoring device, swiveling from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double-bearing milling unit ensure maximum stability, precision, smooth running, and long service life Solid and precise machine table made of stress-free cast iron Three milling speeds, manually adjustable from 3500 - 10000 min⁻¹ With right-hand/left-hand rotation of the milling spindle Standard arc milling guard Safety flip stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Electrical data Power of drive motor 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 100 mm Spindle speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. non-tilting 210 mm tilting 180 mm dovetail milling 275 mm Circular saw unit Rip fence length 1600 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2660 mm Saw blade inclination 90 45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade overhang 90° 100 mm Max. saw blade overhang 45° 78 mm Diameter (main) saw blade 315 mm Explanation diameter (main) saw blade: independent of the scoring saw Speed (main) saw blade 4000 min⁻¹ Sliding table and table Table length 1112 mm Table width 430 mm Scope of supply: Arc milling guard Anodized aluminum format sliding table Hfjdpfx Aehp Rdleqgsn Aluminum stop jaws Flip stops Location: In stock at 54634 Bitburg - immediately available -

Year of construction: 2019, condition: like new (used), 2 Quantity Antares Vision Matrix Stations - Top View Standalone module for off-line semi-automatic carton/bottle-to-case or bundle-to-case aggregation The Matrix Station Top View is a standalone aggregation module for off-line manual packaging operations. It is designed to allow Pharma Industries to establish a reliable and consistent hierarchical relationship “parent-child” throughout the composition of packaging from lower level to higher one, such as folding box/bottle to case or bundle to case. The operator inserts the individual packaging into the shipping carton layer by layer. Each completed level is photographed from above by a high resolution auto-focus camera through an automatic trigger. Dedicated software monitors the progress and when the number of units and layers is reached, a label is generated. The Matrix Top View is also able to handle higher aggregation levels, boxes on pallets. Aggregation station designed to maximize productivity in the manual packaging operations. Performs multiple reading from the top of the Datamatrix codes on cartons or bottles when fit into a case, managed as units or as aggregated bundles. The vision head is equipped with camera system and integrated LED lighting to read each layer of cartons during case composition. AUTOMATIC FOCUS ADJUSTMENT FOR EACH CASE LAYER READING MULTIPLE READING WINDOW (mm): 600×420 ERGONOMIC DESIGN OPTION: TRANSPORTABLE ON WHEELS Hodoyb Tw Rspfx Aqgefn

Condition: used, operating hours: 550 h, power: 285 kW (387.49 HP), maximum speed: 30 km/h, front tire size: 800/65 R32 178A8 Mitas AC7ON, rear tire size: 540/65 R30 168A8 Mitas AC65 IMP, Equipment: air conditioning, cabin, onboard computer, Base machine: Combine harvester - Pressurized cabin (3.3 m) with high-performance automatic climate control (heating/ventilation/air conditioning) - Automatic temperature control (ClimaTrak). - Cooler compartment with active cooling, large cup holders, additional sockets (2 x 12 V) - Electrically adjustable and heated exterior mirrors - Two-blade windshield wiper with two speeds - Windshield washer system and intermittent function. - Driving speed lever for hydrostatic drive with integrated control buttons for the following functions: AutoTrac resume. Height and horizontal adjustment of the header. Two-stage feeder, raising and lowering the header, control of the pivoting frame for lateral tilt. - Three-stage header return and reel return - Controls for activating the unloading auger - Quick stop for header/unloading auger. - Rotary stop alarm when the threshing unit is switched off. - Controls and instruments: Extended automatic combine harvester settings. - TouchSet (automatic combine harvester settings) with the following functions: Fully automatic setting or user-defined preset of threshing drum speed, threshing concavity gap, cleaning fan speed, as well as upper and grain sieve opening. - CommandTouch control console. - Electro-hydraulic header and threshing unit control. Automatic reel speed control (Dial-A-Speed). Header reverser with reel reversing function. - Package for header control: Height return adjustable to three positions. Reel return. - Active cutterbar pressure control for flexible cutterbars. Sensor system for header height. Hfodpfsz Na Nrox Aqgen - Seat: Centrally located driver's seat with air suspension, longitudinal damping, and folding armrest. Integrated passenger seat (for training purposes). Seat belts for driver and passenger. - Lighting: Work lights at the top. Headlights with high beam. Headlights with low beam. Transport and work lights. Lighting for grain tank and unloading auger. Warning lights and tail lights with integrated turn signals. Three rotating beacons. Brake lights. Maintenance light package. - Display: CommandTouch multifunction display on the corner post with: Display for engine power. - Display for engine speed. Display for adjustment of the scraper plates and the automatic reel speed control (Dial-A-Speed). Display for transmission gear or transmission shift group (only for transmissions with electrical shifting or ProDrive transmissions). VisionTrak display (grain loss, over-threshing monitor). Display for active header control and header cutterbar pressure. - CommandCenter color display with the following display and control functions: Data on combine harvester/header/engine. Diagnostics and calibrations. - Feeder: Reinforced tilt cylinder. Central header locking via multi-coupling. Integrated mechanical cutterbar angle/horizontal adjustment on the feeder. - Hydraulically operated mechanical reversing gearbox. Stone trap with tilting function. - Threshing drum with a 660 mm diameter, high inertia and electrically adjustable threshing concavity. - Rapidly pivoting intensive rasp bar, 800mm threshing drum with high capacity and fully meshed separation basket, and discharge drum, DynaFlow™ Plus cleaning system with preparation system for six augers and upper and grain sieves with high-performance elements. - Grain transport: Modern grain loss monitoring system with digital signal processing.

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting Hedpfx Aqjcmat Usgsfn more photos an questions

Condition: used, Industrial Computer Work Station. Lockable cupboards with cable routing apertures Slide out keyboard tray Lockable and ventilated monitor housings 3 available. £490.00 each Hfjdpfx Aqez Iytujgsn Keyboard, monitor and mouse NOT included.

Condition: used, Assembly table for fitting fittings into window frames or similar. Hsdpfxoztv Dcj Aqgefn Technical data: - Table size approx.: 1.8 x 2 m

Year of construction: 2019, condition: used, General Information The MobyLift is a practical tool for ergonomically lifting, transporting, and positioning products such as doors, table tops, and other panels. From an operational perspective, the MobyLift is a responsible investment. It is easy to use, reduces the number of damaged products, increases productivity, and prevents back problems, thereby reducing work-related absences. The MobyLift was developed in collaboration with reputable assembly companies, combining their knowledge and experience with our expertise to create a practical tool. The MobyLift MC-120-H consists of the following modules: - Mobile base frame - Electric lifting and tilting system - Automatically operating vacuum unit - Wireless electric control Hfodpfxov Dauwe Aqgsn The MobyLift MC-120-H is designed so that it can be quickly and easily disassembled into several portable modules after it is switched off. This makes it very convenient to load and unload the MobyLift or move it to another floor or building. The MC-120-H is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a battery level indicator, which allows the battery status to be continuously monitored. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilting angle, front to back: 37°, electrically operated - Swivel angle - head joint on both sides: 90° - Rotation angle - head joint: 360° continuous - Lateral displacement: 7 cm - Weight: 150 kg, can be disassembled into modules Storage location: Nattheim

Condition: used, Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, König Combiline KCL 6 / 800 mm with WK-RR and Donut station – 2022 Automatic König Combiline line for the production of small breads and shaped products, equipped with a Classic Rex Futura, a WK-RR shaping station, and an original König Donut station. Features: – Manufacturer: König – Model: Combiline KCL 6 – Year: 2022 – Working width: 800 mm – Dividing and rounding head: Classic Rex Futura – Type: Futura T5/4/3S – Drums: SK51 + SK65 – Weight range: 22 to 115 g – Operation in 3 / 4 / 5 rows – Maximum capacity: up to 7,500 pieces/hour – Control via touchscreen with programmable settings Line composition: – König Classic Rex Futura, divider-rounder – Pre-elongator – Proving chamber / pre-fermentation – Shaping station with WK-RR coiler – Moistening and seeding system – Automatic depositing system – Donut cutting / stamping station The WK-RR station allows, in particular, the processing of elongated and coiled products and significantly increases the versatility of the line. The Combiline enables the production of a wide range of products: – Round small breads – Hamburger buns – Hot dog buns – Elongated small breads – Flattened products – Coiled products – Various shaped products – Donuts Hodpfx Aqsz I U Tcjgefn König Donut station: – Width: 800 mm – Bottom-side center cutting – Centering device for precise cutting – Automatic removal of cut dough – Stainless steel construction Condition: Line in very good condition and always well-maintained. It is currently still installed in a bakery in the UK and can be viewed before dismantling. Dismantling is scheduled soon, and the line will then be available in our warehouse in Belgium. Video available upon request.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: PRASA HYDRAULICZNA TYPU C HPW 50 50 TON, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, reverse speed: 18 mm/s, pressing force: 51 t, pressing speed: 18 mm/s, stroke length: 200 mm, table length: 500 mm, table width: 400 mm, Equipment: documentation/manual, Special Offer – 5% Discount Available! Hydraulic C-Frame Press The Hydraulic C-Frame Press is a professional industrial machine designed for precision pressing, bending, straightening, assembling and forming operations. Its open C-frame design provides excellent access to the working area, making it easy to handle larger workpieces and operate from multiple sides. The robust welded steel frame ensures outstanding rigidity, durability and reliable performance, while the hydraulic system provides smooth, accurate control of pressing force and ram movement. Suitable for continuous industrial use, this press is ideal for production facilities, maintenance departments and metalworking workshops. Main Features • High pressing force • Open C-frame design • Heavy-duty welded steel construction • Precise hydraulic control • Smooth ram movement • Easy access to the working area • Reliable industrial performance • CE certified Technical Specifications • Pressing force: 500 kN (approx. 51 t) • Maximum hydraulic pressure: 25 MPa • Maximum opening: 500 mm • Stroke: 200 mm • Table dimensions: 500 × 400 mm • Throat depth: 200 mm • Downward speed: 19 mm/s • Return speed: 18 mm/s • Motor power: 4 kW Applications • Press fitting • Bending • Straightening • Assembly operations • Forming • Metalworking workshops • Automotive industry • Tool rooms • Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. Hedpfx Aqeyr D R Nogjfn We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: new, axle configuration: 2 axles, loading space length: 66,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 275/70-22,5, color: black, = Additional Options and Accessories = - LED lighting - Air suspension = Notes = Internal number for customer inquiries: 2-149 !!! WORLD EXCLUSIVE !!! PAVIC HTA 20 66Z Shortwood Trailer with OPTIPA SW bolsters. SW = Quick-change. With this, you can remove the OPTIPA AL10 telescopic stakes in just a few minutes and have complete flexibility! Ideal for roundwood and sawn timber! The side bolster storage is included! You have the greatest possible flexibility that the market offers! !!! IMMEDIATELY AVAILABLE !!! You can choose the color of the stake strips from red, green, blue, neon red, neon yellow, or black! 2-axle bolster trailer 4x OPTIPA SW bolster body (quick-change system using a patented wedge system) 8x OPTIPA AL10 telescopic stakes Special wrench for stake assembly and telescoping Side aluminum box for storing the stakes (for 4 pieces) Optionally, a second, larger aluminum box for all 8 stakes could also be realized for an additional cost Chassis length approx. 6600 mm Overhang at the front approx. 710 mm (turntable bolster) Bolt-on hooks on the loading bolsters for load securing Payload 14750 kg Total weight technically possible 22,000 kg EBS / ABS Air suspension with safety cables, leaf spring suspension available upon request 2 x 10t SAF off-road axles Steering ring with double row of ball bearings, permissible axial load max. 20 tons Lifting cable at the front Smartboard Wabco Signal light system at the front, clearly visible as an indicator of the maximum air spring pressure LED lighting LED work lights High-quality powder coating - coating including the baking process Twin tires: 275/70 R 22.5 with branded tires on steel rims Optional: ALU wheels, brand ALCOA Dura-Bright, available at an extra cost Financing, leasing or hire purchase are possible. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. = Further Information = Tire size: 275/70-22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Steered GVWR: 22,000 kg Brand of superstructure: PAVIC shortwood bolster OPTIPA SW (quick-change) General condition: very good Technical condition: very good Hedpez Hkdhefx Aqgsfn Optical condition: very good

Year of construction: 2014, condition: not inspected (used), functionality: unexamined, machine/vehicle number: 10150, General Description For sale is a professional assembly press manufactured by the Spanish company Enginyeria Teknics Sabadell, S.L. This unit dates back to 2014 and is factory-designated as "PRENSA REAR WAVE 2". The machine is equipped with an advanced electromechanical actuator (pressing module) from KISTLER, with a nominal pressing force of 60 kN. This system is designed for precise pressing, assembly, and force testing processes in industrial applications. Technical Data (TEKNICS Press) Manufacturer: Enginyeria Teknics Sabadell, S.L. (Spain). Machine Number: 10150. Serial Number: 338.003 6775. Year of Manufacture: 2014. Power Supply: 400 V / 50 Hz. Power: 25 kW. Required Pneumatic Pressure: 6 bar. Machine Weight: 800 kg. Certification: CE marking. Technical Data (KISTLER Actuator) Manufacturer: KISTLER (Dr. Steiger Mohilo+Co GmbH). Type: 2151B60304002. Model: NCFH 60 400 300 B H C G. Nominal Force: 60 kN. Serial Number: 2683373. Actuator Weight: 87 kg. Certification: CE marking. Construction and Equipment Stable construction with a dedicated protective enclosure consisting of black mesh panels and yellow profiles. The operator's work area is protected by optical safety barriers (light curtains). Hjdpfjz Rz Rhox Aqgsfn The work area features a massive mounting plate with threaded holes and a set of tools, dies, and adapters to facilitate part positioning. A free-standing control cabinet is included with the press. The cabinet door houses the operator panel (HMI) with a display, the main power switch, and an emergency stop button.

Condition: used, Year of construction: 2001, Transnorm modular conveyor with combiner conveyor belt GF 2500-1300-1200 RA2230 Hfsdpforixi Njx Aqgen Merging of two belts into one Technical data: Conveyor length (NL): 2500 mm Frame width (NB): 1300 mm, 1600 mm with motor Belt width (GuB): 1200 mm Overall height (BH): 80 mm, 430 mm with motor at the bottom, approx. 1000 mm with motor at the top Scraper height: 190 mm (without motor) Belt width/height scraper: 180 mm Support feet: optionally available Conveyor speed (v m/s): 1 Drive: SEW geared motor, R17 DT80N4 Electrical data: 50Hz V380-500, kW 0.75 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, DHP HYDRAULIC STATION LIFT - 1.5t DHP hydraulic bench jack is used for stepless lifting and lowering of material at assembly, loading and machining stations with table dimensions similar to EUR pallet, allows to maintain a constant working level when loading or unloading material. Lifting of the lift table is carried out by means of two hydraulic cylinders, powered from a compact electro-hydraulic unit, controlled from the cassette. The cassette is equipped with "lifting", "lowering" and "EMERGENCY STOP" buttons. Load capacity max kg 1500 Dimensions of the table standard mm 900x2000 Height in folded state (standard) mm ~230 Working stroke (max) mm 1100 Lifting time s approx. 30 Pressure in the hydraulic system MPa max 16 Noise level dBA approx. 72 Installed power kW 1.1 Hsdpfxjt Ubn Nj Aqgsfn Electrical supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Weight of the device kg ~450

Condition: used, Year of construction: 1990, operating hours: 2,946 h, power: 115 kW (156.36 HP), Equipment: air conditioning, cabin, INTERNAL VEHICLE NUMBER: M662 ----CLAAS DOMINATOR 88 SL ----HOURS: 2,946 ----YEAR OF MANUFACTURE: 1990 ENGINE: PERKINS 6-CYLINDER WITH TURBO (4-STROKE DIRECT INJECTION) WATER-COOLED MAXIMUM SPEED: APPROX. 25 KM/H Hsdpoz Sdvwsfx Aqgsfn CUTTING UNIT: 3.90 METERS RAPS TABLE THRESHING DRUM WIDTH: 1300 MM THRESHING DRUM DIAMETER: 450 MM STEPLESSLY ADJUSTABLE FAN FOR CLEANING FUEL TANK PIPE: HYDRAULICALLY SWIVELING TIRES NEW NUMBER OF SHAKERS: 5 SHAKERS HYDRAULIC DRIVE GRAIN TANK CAPACITY: 4600 L STRAW SPREADER TRANSPORT LENGTH: 10 METERS TRANSPORT HEIGHT: 3.85 METERS UNLADEN WEIGHT: APPROX. 8500 KG HEATING AIR CONDITIONING (COMPRESSOR MISSING) 3D LEVELING SYSTEM HYDROSTATIC TRANSMISSION WITHOUT CUTTING UNIT WAGON THE HEADER DRIVE HAS BEEN COMPLETELY OVERHAULED NEW BASKET NEW BELT NEW BLADE Contact us directly via WhatsApp: Why Autohaus Mat GmbH? 1. Attractive trade-in: We handle the process quickly and fairly. With our trade-in bonus, you maximize the value of your vehicle and benefit when purchasing a new model. 2. Individual financing solutions: Would you like to finance your new vehicle? We offer customized financing solutions tailored to your needs: with or without a down payment * Flexible terms * Top conditions 3. Personal customer service: Our experienced team will support you from the initial consultation to vehicle handover. 4. Our additional services: In addition to vehicle purchase, we offer exclusive services for a smooth process: Worldwide vehicle sales: Support with purchase and export, wherever you are. Transfer registration plates: Provision of export or short-term registration plates for transport. Customs clearance: We take care of all formalities for export abroad. Delivery of your vehicle: Safe and timely delivery directly to you. Important: All offers are subject to availability. The vehicle description serves as a guide; only the information in the purchase contract or order confirmation is legally binding. For vehicles with VAT, net sales for export are generally possible if all required documents are available. Net sales within the EU are now only conducted with VAT deposit and proof of registration in the destination country (Confirmation of Arrival), provided that all necessary documents are present. For our export customers, we offer the following services: Export license plates for up to 30 days * Short-term license plates (5 days) * Preparation of the export declaration Contact us directly via WhatsApp: Staff on-site during opening hours. Please call in advance to make a reservation. We look forward to your call Your team from Autohaus MAT in Waibstadt

Condition: good (used), Pallet stacking frame for Euro pallets Width: 865 mm Depth: 1270 mm Height: 1280 mm Suitable for Euro pallets: Hfodjx Ih I Eepfx Aqgsn · Pallet dimensions: 800 x 1,200 mm (W x D) · For optimal use of the pallet surface · Quick assembly · Collapsible for space-saving storage · Surface: green · Stackable: up to 4 units · Load capacity: 300 kg More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: new, Pallet racking frame for Euro pallets Width: 865 mm Depth: 1270 mm Height: 1480 mm Suitable for Euro pallets: · Pallet dimensions: 800 x 1,200 mm (W x D) · For optimal use of the pallet surface Hsdex Ih Huopfx Aqgefn · Quick assembly · Collapsible for space-saving storage · Surface: Light blue · Load capacity: 300 kg · Stacking height in storage: 4 levels More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 1975, machine/vehicle number: 71879, Hyraulik press Hfodpfx Aqjz Sdpqegen 51x Kunstoffplatten Plate formats: 600x600 Platefilter features: Manual spindl dimension ca. 250x90x130 cm Distance between first plate and spindle approx ca. 90cm