Used Compressed Air Straight Screwdriver for sale (25,361)

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Gbsdpfx Aedzqn Ujlmjl Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar Gjdpfx Aloh U Dtusmsbl 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Piston Compressor KAESER Type EPC 630-250 Serial No.: 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Godpfxowypqro Almsbl Space required (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition

Condition: used, Screw compressor KAESER type BS 50 Serial no.: 402852 Year of manufacture: 1990 Volume flow: 5 m³/min. Gedpfx Aeiyu Ifjlmobl Operating pressure: 7.5 bar Main motor power: 30 kW Electrical connection: 400 Volt, 50 Hz Connection thread: 1 1/2" inch - 1107.90 hours of operation read - 749.00 load hours read - Sound-insulated Dimensions (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Was a reserve compressor and has only few operating hours.

Condition: used, Filter fitting, filter unit COMPAIR for compressor units Compressed air filter Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Thread connection: G 1 1/2" Flow rate: approx. 8,5 m³/min Filter element- No: CE 0087B Godpfx Alohalvdjmobl - Filter housing made of aluminum weight: 5 kg dimension L x W x H 125 x 110 x 420 mm good condition

Condition: used, Pneumatic screwdriver, pneumatic screwdriver DESOUTTER Pneumatic screwdriver, straight screwdriver for screwdriving technology Type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm Compressed air requirement: 6 bar Air consumption: 8.7 l/s Bit holder: M6 - Rotary switch for clockwise and counterclockwise rotation (rotary ring control) - Without screwdriver switch-off - Compressed air control line Ø 4 mm - Compressed air connection for screwdriver function min. Ø 10 mm - Aluminum holder for handling device - Screw feed Ø 12 mm (inner diameter) Dimensions L x W x H 60 x 46 x 870 mm Gbjdpfx Aofgrrhslmel Weight: 2.8 kg good condition 4 pieces available, price per screwdriver

Condition: new, Compressed air strip nailer 6512/130 SQ for nails up to 130 mm long Applications: Carpentry, roofing, packaging, interior finishing, prefabricated house construction, timber formwork, battens, crate and pallet construction, fence construction, load securing, etc. - Single release - For paper-loaded safety strip nails - Eurocode 5 nails in accordance with DIN EN 14592 - User-friendly driving depth adjustment - Robust and powerful - Optimally silenced and balanced Technical data: - Release type Single release - Air consumption per driving operation 5.40 liters - Nail lengths from 90 to 130 mm - Nail diameter 3.4 - 4.2 mm - Nail series 34° safety strip nails - Magazine capacity 75 nails - Weight 6.60 kg - Length x width x height 470 x 150 x 460 mm Gjdpfovcl Slox Almobl The nailer is new and unused. Only traces of storage may be present, as the device was hanging in our showroom. You will receive an invoice with VAT shown. Payment: Prepayment by bank transfer - NO PAYPAL! If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2010, Ingersoll Rand TMS 80 Refrigerant Dryer Capacity: 8.2 m3/min Year of manufacture: 2010 Gedpfx Alsymmbtsmsbl The dryer is fully operational.

Condition: good (used), Mäder DLP 1700 HV Direct-acting compressed air press Press Direct-acting compressed air presses are used wherever the compressive force is required constantly over a longer distance or where a large immersion depth is required: e.g. when pressing in pins, bushings and ball bearings or when deforming. DLP 1700 HV Direct acting compressed air press Pressure force at 6 bar: 17 kN Working stroke: H mm: 40/60/80 Gjdpfx Aod Tam Nslmsbl More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2021, functionality: fully functional, compressed air connection: 13 bar, type of input current: AC, volume flow: 390 m³/h, total width: 580 mm, total length: 588 mm, total height: 899 mm, pressure: 13 bar, overall weight: 80 kg, pressure dew point: 3 °C, input voltage: 230 V, ambient temperature (max.): 45 °C, ambient temperature (min.): 1 °C, pressure (max.): 14 bar, power: 0.71 kW (0.97 HP), empty load weight: 80 kg, input frequency: 50 Hz, nominal power: 0.71 kW (0.97 HP), input current: 3 A, air pressure: 13 bar, For sale: 2 industrial refrigerated compressed air dryers – available together or separately We are offering two used industrial refrigerated dryers for compressed air. The units can be sold as a set or individually. Ideally suited for integration into compressed air systems requiring reliable drying and condensate removal. 1. Airgroup AGD 450 – Refrigerated Compressed Air Dryer (2021) General information Brand / Model: Airgroup AGD 450 Year of manufacture: 2021 Serial number: 210008384 Code: AGD450AC9A085 Technical specifications Nominal flow rate: 450 m³/h Max. working pressure (compressed air circuit): 14 bar Godpfxjyhdhmj Almjbl Compressed air circuit capacity: 5.9 liters Compressed air temperature range: 2 … 55 °C Refrigeration system Refrigerant: R407C Refrigerant quantity: 0.65 kg CO₂ equivalent: 1.15 t Refrigerant circuit volume: 0.6 liters PS HP / LP: 39.2 / 20.9 bar Refrigerant circuit temperature range: −10 … 120 °C Electrical Connection: 1/230 V ±10% / 50 Hz Power: 0.71 kW Nominal current: 3.4 A Max. current (FLA): 8.9 A Fuse: 10 A Protection class: IP40 Other PED Directive: 2014/68/EU – Cat. I Fluid group: 2 Ambient temperature range: 1 … 45 °C Diagram: WD003 V00 R00 2. ALUP ADQ 390 – Refrigerated Compressed Air Dryer (2014) General information Brand / Model: ALUP ADQ 390 Year of manufacture: 2014 Product number: 4102000802 Serial number: CAI692332 Technical specifications Nominal flow rate: approx. 390 m³/h Working pressure: 13 bar Max. pressure: 13 bar Temperatures Max. inlet compressed air temperature: 55 °C Max. ambient temperature: 43 °C Electrical Connection: 230 V / 50 Hz Power: 1.64 kW Phase: single phase Refrigerant Type: R404A Quantity: 1.35 kg Weight Total weight: approx. 80 kg Sales Information - Available as a set or individually - Suitable for industrial compressed air installations - Ideal for removing moisture and condensate from compressed air Interested or have questions? Feel free to contact us for more information, a quote, or to schedule a viewing.

Condition: used, New compressed air refrigeration dryer, unused compressed air dryer from stock Compressed air dehumidifier SMC type IDFA3E-23 Compressed air dryer, compressed air dehumidifier Serial No.: PP0213S Year of manufacture: 2011 SMC compressed air dryer IDFA size 3E Flow rate per hour: 12,000 liters/h (12 m³/h) Flow rate per minute: 200 liters/min. Operating pressure max. 10 bar Operating pressure: 0.15 to 1.0 MPa (manufacturer's specification) Refrigerant: R134a Gbodpfx Asyif I Uslmol Temperature range: 5°C to 50°C Power consumption: 180 watts Power supply: 230 volts, 50 Hz, 1.2 amps Connection pipe thread: 3/8" - Stainless steel heat exchanger, air-cooled condenser - Condensate separator with automatic drain - Condensate drainage via hose Space required (L x W x H): 410 x 226 x 473 mm Weight: 18 kg New, unused, in mint condition from stock

Year of construction: 1980, condition: ready for operation (used), Two compressed air tanks are available. 1) Karl Kremsmüller u. Co., year of construction: 1980, operating pressure: 7bar, test pressure: 9.1bar, operating temperature: 20°C, medium: compressed air, capacity: 5300l. 2) Engelbert Dax, year of manufacture: 1973, capacity: 15000l, operating pressure: 4ATÜ, test pressure: 5.2ATÜ. On-site inspection is possible. Gjdeumwg Ejpfx Almjbl

Condition: good (used), Year of construction: 1998, Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure vessel, compressor tank -Manufacturer: Mechanical and container construction, standing compressed air container -Content: 3000 l -Operating pressure: 11 bar -Accessories: including attachments, see photos Gbedpfophun Ejx Almel -Dimensions: Ø 1475 x 2760 mm -Weight: 700 kg

Condition: ready for operation (used), System includes (1) Screw Compressor BOGE SF 75-2 (2) Cyclone Separator BEKO CLEARPOINT (3) Fine Filter BEKO CLEARPOINT (4) Refrigeration Dryer BEKO DRYPOINT RA eco (5) Catalytic Converter BEKO BEKOKAT CC 360 (6) Carbon Filter BEKO CLEARPOINT. Godpfxjhvizgo Almsbl

Condition: excellent (used), MANUFACTURER: ALUP MODEL: ADQ2700 SERIAL NO.: 07M011498 YEAR: 2007 POWER (kW): 8.7 CAPACITY (m3/min): 45 Gbedpfxoykvphj Almel PRESSURE (bar): 12 HOURS (DOCUMENTED/TOTAL):

Condition: excellent (used), Year of construction: 2015, MANUFACTURER: DRYTEC MODEL: SD1800 SERIAL NO.: 3414MA12150 Gbjdeykvmtopfx Almjl YEAR: 2015 POWER (kW): 3.14 CAPACITY (m3/min): 30 PRESSURE (bar): 16 OPERATING HOURS (DOC/TOTAL): FREQUENCY INVERTER: BUILT-IN DRYER: R134a, 7kg

Condition: excellent (used), Year of construction: 2011, PROD. BRAND Godpfxoykvk Ee Almsbl MODEL MDX6500 S/N CAI492661 YEAR 2011 POWER (kW) 1.64 CAPACITY (m3/min) 6.5 PRESSURE (bar) 13 HOURS (DOC/TOTAL) FREQUENCY INVERTER BUILT-IN DRYER yes R404a 1.35kg

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Gbodpfomt Dcxox Almsl Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 7000 l/min Power 1.37 kW Power supply voltage 230 V Dimensions (L x W x H) 1000 x 550 x 920 mm Weight 95 kg Type and amount of refrigerant R410a, 900 g

Condition: new, Year of construction: 2026, 270 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 270 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. Godpsxbzaljfx Almsbl UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 270 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 5 connection ports with diameters of 1", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands chemical and atmospheric factors. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in the Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 5 pcs – diameters: 1", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Year of construction: 2026, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 3800 l/min Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 59 kg Gbodpfx Aemt Dcqslmsl Type and amount of refrigerant R410a, 650 g

Condition: new, Year of construction: 2026, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 500 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1.1/4", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands both chemical and atmospheric conditions. Gbodpjxby D Aefx Almol The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in both Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Precision and Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of air-powered devices and significantly extends compressor lifespan by reducing the number of start-stop cycles. The vertical design allows for space-efficient installation, which is especially important in facilities with limited room. A properly matched tank helps minimize pressure drops and prevents pneumatic system overloads, resulting in greater efficiency and enhanced safety across the entire installation. Standard Equipment Connection Ports: 6 pcs – diameters: 1.1/4", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system Godpfx Asmt Dbhslmsbl The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Type and amount of refrigerant R134a, 400 g The price given is a NET price. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator Gbjdpfx Alomt Dcfjmol After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Condition: excellent (used), Year of construction: 2011, MANUFACTURER: HANKINSON MODEL: HHDP2700 SERIAL NUMBER: 4001011004 YEAR: 2011 POWER (kW): 7 Gedpfx Aljyh Uvxjmjbl CAPACITY (m³/min): 45 PRESSURE (bar): 16

Condition: excellent (used), MANUF. AGT TYPE VD8/18C PY S/N 7D8-02741 YEAR n/a POWER (kW) 7 OUTPUT (m³/min) 30 Gbedpfjyh Uq Nsx Almel PRESSURE (bar) 16 HOURS (DOC/TOTAL) FREQUENCY INVERTER BUILT-IN DRYER R404a