Used Condo 120X120 for sale (77)

Condition: used, Year of construction: 2000, used CONDOR AC, partially overhauled Centre height: 165 mm Between centres: 750 mm Spindle bore: 40 mm Spindle speeds: 22–2,800 rpm, infinitely variable Bodex E Um Nepfx Aqwell - Quick-change tool post size B - WEILER DZ-V digital readout - Hollow spindle stop - Fixed steady rest - 7 Multifix tool holders - Flat splash guard - Electrically interlocked chuck guard - Change gears and various soft jaws The machine is partially overhauled: - Bed slide: guideways re-coated and hand-scraped, gibs and lower guide strips adjusted - Cross slide measured and aligned on bed slide; cross slide dovetail guide newly scraped, gibs adjusted and scraped - Top slide newly scraped and gib matched - All measuring scales overhauled and cables replaced The machine is located in our showroom at 71334 Waiblingen-Beinstein and is immediately available. For details on equipment, please contact us.

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW Bsdpfx Aewrm Dtoqwell >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: good (used), Center distance: 800mm Spindle clearance: 38mm Center height: 165mm Bljdpfxsukrtnj Aqwel Turning diameter over bed: 330mm Turning diameter over slide: 170mm Speed: 24-2800 Dimensions: 1600mm x 600mm x 1250mm Weight: 850 kg

Condition: ready for operation (used), turning length 800 mm turning diameter over bed 330 mm turning diameter over slide rest 170 mm turning speed range 24 - 1900 U/min spindle bore 38.0 mm centre height 165 mm total power requirement 3.5 kW weight of the machine ca. 850 kg. dimensions of the machine ca. 1850 x 800 x 1700 mm from a vocational school - in good condition (!!) Bodsxmaktopfx Aqwsll particularly suitable for medium-precision turned parts - in checked conditions - machinenvideo - ?v=GDoJ0Z7Dckw Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - EMERGENCY stop button - Operating instructions

Condition: good (used), 1 used lead and feed screw lathe Make: Weiler Model: Condor VS 2 Blsdpfew Rcrcox Aqwel Technical Data: Centre height: 160 mm Centre distance: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock taper: MK 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (W x D x H), approx.: 1930 x 880 x 1470 mm Equipment: 3-jaw chuck Quick-change toolholder system Multifix

Condition: as good as new (ex-display), Year of construction: 2024, Manufacturer: DURMA Model: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 watts Control system: Siemens Sinumerik 840D Operating hours: 24 hours Max. tube diameter: 170 mm Min. tube diameter: 20 mm (12 optional) Max. dimensions of square profiles: 120x120 mm Max. dimensions of rectangular profiles: 150x100 mm Max. profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. profile weight: 37.5 kg/m Max. material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeatability accuracy: +/- 0.05 mm Max. loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H, C, U, L Bsdpfx Ajd Tt Atjqwjll *Footprint L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on the equipment variant Standard equipment Control system Sinumerik 840D Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for outputting analog values (power, speed, pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 watts (including cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: new, FC120 ZK flat finishing machines were developed thinking in simplicity of operation whenever flat bars, rectangular tubes or flat elements need to be belt finished or polished. These machine enable the work up to 120 mm width with a range of 3 possible combinations of belt heads and brushes. FC120 ZK combines the abrasive belt head (Z) with an abrasive brush (K). Bedped Ix I Asfx Aqwsll Abrasive belt head: Finishing and removing imperfections of square of rectangular tubes, flat bars or any flat component. Abrasive brush head: Smooth finishing after belt grinding operation with non-woven brush. Square or rectangular tube finishing: High quality of surface finishing on stainless steel tubes, tube after tube - also flat bars finishing. Quick abrasive belt replacement: Tool-free abrasive belt replacement. Fast and easy belt change in few seconds. NS Máquinas can supply different conveyor solutions in order to grind small items. Technical Details - FC120 ZK Working capacity (Ø mm) 120x120 No. belt stations (Z) 1-2 No. brush stations (K) 0-1 Abrasive belt dimensions (mm) 120x1850 Abrasive brush dimensions (mm) 120xØ200 Abrasive belt speed (m/s) 20 Abrasive brush speed (m/s) 15 Feeding speed (m/m) 12 Abrasive belts motor per head (kW) 3 Abrasive brush motor per head (kW) 2.2 Feeding motor (kW) 0.25 Total power (kW) 5.5 (ZK) Consumption (A) 12 (ZK) Dust extraction connection per head (Ømm) 80 Dimensions (mm) 1450x800x1800 (ZK) Weight (kg) 500 (ZK)

Condition: new, Year of construction: 2024, Linishing machine for flat parts or rectangular tubes. Bljdpfx Ajg R Sxvsqwsl Working capacity (mm) 120x120 Abrasive belt speed (m/s) 20 Abrasive belts (mm) 120x1850 Conveyor belt speed (m/min) 12 or 6+12 Abrasive belt motor (kW) 3 Consumption (A) 7 Dimensions approx. (mm) 975x880x1800 Weight approx. (kg) 350

Condition: new, Year of construction: 2025, skylaser Mark - 2D 3D optional fiber laser engraving / marking laser is the complete solution for your complex laser engraving - Applications The skylaser laser marking / engraving laser at a Glance: Processing Area : from 110 x 110 or 120x120 or 300x300 mm (depending F- Theta lenses / 3D option) Laser: IPG ( pulsed fiber laser , YTTERBIUM PULSED FIBER LASER ) SCANLAB galvanometer Nominal laser power : 20W / 30W / 50W New: Software controlled variably adjustable working width ( X axis max 200mm depending on the design . ) Included! New: Software controlled variably adjustable working height ( Z axis max 400mm depending on the design . ) Included! Optionally, other work areas - Automatic Materialzufuehrung etc. Air cooling as low power consumption Labeling speed: up to 5000 mm / s ( SCANLAB dyn AXIS ® galvanometer to reach 10 SCAN ® cube marking speeds of up to 640 characters per second. ) Redundant safety system Laser Class 1 according to the configuration or Laser class: 2 ( optional pilot through laser ) piper -technology HQ mirrors and optics for perfect results , powered by Scanlab (R ) piper -technology industrial PC with the software pre-installed control New: including Laser Focus Finder New: including process air control Optional : laser positioning : an integrated diode laser for optimal positioning Including new F -theta lens 110 x 110 mm working area with protective glass! ( To extend the working range of optional (120, 180 , 350 mm) virtually maintenance-free Key Features Let yourself be inspired and please request our product video on your sample production ! Model Mark IPG laser engraving laser skylaser Work size 100 x 100 or 120 x 120 mm (F -theta 160mm ) other optional Blodpfx Aqsbv Dayewol Laser power 20 / Option: 30/50 W ( air cooled) laser method YTTERBIUM PULSED FIBER LASER Engraving

Year of construction: 2002, condition: good (used), MEP CONDOR 90 CNC MR automatic CNC-controlled miter saw for cutting aluminum profiles, with automatic feed. Used, in excellent condition. Blodpfx Ajikztpeqwel

Year of construction: 2001, condition: good (used), machine/vehicle number: 129603-40-6, Technical data: - Saw blade dimensions: 300 x 3.4 x 32 mm - Saw blade speed: U/min - Cutting range: - at 90° (round): 90 mm - or (square): 80 mm - Pneumatic clamping cylinders - Material feed system with positioning control - Single stroke up to approx. 1000 mm - Multiple strokes - Swiveling arm with control panel and CNC control MEP - Motorized dust extraction and chip extraction, mobile unit - Drive: 400 V / 1.1 kW Bledpfxjd Aai Te Aqwol - Space required: approx. W 2750 x H 1800 x D 2000 mm - Weight: approx. 600 kg

Condition: new, Year of construction: 2025, The use of a variety of fonts, the application of barcodes, serial numbers, logos and images is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and time-consuming marking tasks can be easily created on the supplied industrial PC. You can do the exact positioning in no time at all, thanks to the optional monitoring camera for process tracking and software-supported workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications and in continuous use. Bedpfsdgfgcox Aqwjll The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-Theta lenses dependent / 3D option) Laser source: IPG (Pulsed Fiber Laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W New, optional: software-controlled, variably adjustable working width (X, axis max. 450mm depending on the structure) included in the scope of delivery!

Condition: new, Year of construction: 2025, You are looking for a real machine and not a toy, then you have come to the right place: Fiber laser laser engraver large format X1130 x Y665 x Z260mm Laser markers skyLaser Mark - 2D optional 3D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most delicate structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, force-free and without tool wear. The advantages in your application are the geometric flexibility and high processing accuracy. This type of processing can be used regardless of the hardness of the workpiece to be processed. The flexibility of the system increases with the mobile work table that can be adapted to your needs. You can easily integrate the system into your production line or operate it as a stand-alone solution. Our skyLaser Marks provide very precise and permanent markings (laser engravings) and are suitable for the special laser application area metal and certain organic substances. The use of a variety of fonts, the application of barcodes, serial numbers, logos and images is effortlessly possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of stamps, engravings, lettering and complex, fine structures, the software is extremely user-friendly. Even very complex and time-consuming marking tasks can be easily created on the supplied industrial PC. You can do the exact positioning in next to no time, thanks to the optional observation camera for process tracking and software-supported workpiece alignment. Since the system has hardly any wearing parts and, thanks to the IPG laser technology, is almost maintenance-free, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or fiber laser laser engraver large format with integrated axes X1130 x Y665 x Z260mm Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB SCANcube galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working height (Z, axis max. 260mm depending on the structure) Optionally other work areas - automatic material feed, etc. Air cooling because of low energy consumption! Bsdpfx Aqjf U Spxjwoll Marking speed: up to 5000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCANcube ® achieve marking speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (with optional pilot laser) Pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: including process air control New: including extraction control Optional: Positioning laser: integrated diode laser for optimal positioning New including F-Theta lens 110 x 110 mm work area with protective glass! Fiber laser laser engraver large format X1130 x Y665 x Z260mm almost maintenance-free

Condition: used, L + Z lathe WEILER, Type Condor 81 A Machine No. 36553, Year of manufacture approx. 1985 Distance between centers 750 mm Swinging diameter over bed 330 mm Distance between centers above bed 165 mm Swinging diameter over cross slide 180 mm Distance between centers above cross slide 90 mm Bedek S Ht Aspfx Aqwsll Spindle bore 40 mm Chuck mount Short taper DIN 55027, size 5 Tailstock internal taper MK 3 Tailstock quill travel 110 mm Spindle speed 45 - 2800 rpm, 16 steps Drive power 3 kW Mains connection 400 Volt, 50 Hz - Spindle speed via 16 gear stages - 3-jaw chuck Ø 160 mm RÖHM with boring and turning jaws - Quick-change tool holder Multifix size B with 3 inserts - Automatic feed in longitudinal and facing directions - Electro-mechanical spindle brake - Emergency stop - Coolant tank with pump in the machine base, without supply line to the work area - Folding chuck guard - Splash guard - 1 rotating center - Electrical diagram and operating manual Space requirement L x W x H 1850 x 950 x 1400 mm Weight 1100 kg Good condition

Condition: new, Year of construction: 2025, If you are looking for the right machine and not a toy, then you have come to the right place: Foil label - label printer - name plate machine Laser markers skyLASER Mark 500 - 2D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where the conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most filigree structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, without force and without tool wear. The advantages in your application are the geometric flexibility and high machining accuracy. This type of machining can be used regardless of the hardness of the workpiece to be machined. The flexibility of the system increases with the mobile work table, which can be adapted to your needs. You can easily integrate the system into your production line, or operate it as a stand-alone solution. Our skyLaser Marks deliver very precise and permanent markings (laser engravings) and are suitable for the special area of ​​laser metal and certain organic substances. The use of a variety of fonts, the application of barcodes, serial numbers, logos and pictures is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and complex marking tasks can be easily created on the supplied industrial PC. Precise positioning is done in no time at all, thanks to the optional observation camera for process tracking and software-based workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications as well as in continuous use. Bjdocuiz Tepfx Aqwell The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-theta lenses dependent / 3D option) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working width (X, axis max. 450mm depending on structure) New: software-controlled, variably adjustable working height (Z, axis max. 200/450 mm depending on the body) Optional other work areas - automatic material feed, etc. Air cooling due to low energy consumption Labeling speed: up to 8000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCAN cube ® 10 achieve labeling speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (through optional pilot laser) pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: incl. Process air control New: including suction control Optional: positioning laser: integrated diode laser for optimal positioning New including F-Theta lens 110 x 110 mm working area with protective glass! (Extension of the work area optionally to (180, 350 mm) almost maintenance-free

Condition: new, Year of construction: 2025, If you are looking for the right machine and not a toy, then you have come to the right place: Foil label - label printer - name plate machine Bljdpfjcuiz Sjx Aqwol Laser markers skyLASER Mark 500 - 2D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where the conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most filigree structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, without force and without tool wear. The advantages in your application are the geometric flexibility and high machining accuracy. This type of machining can be used regardless of the hardness of the workpiece to be machined. The flexibility of the system increases with the mobile work table, which can be adapted to your needs. You can easily integrate the system into your production line, or operate it as a stand-alone solution. Our skyLaser Marks deliver very precise and permanent markings (laser engravings) and are suitable for the special area of ​​laser metal and certain organic substances. The use of a variety of fonts, the application of barcodes, serial numbers, logos and pictures is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and complex marking tasks can be easily created on the supplied industrial PC. Precise positioning is done in no time at all, thanks to the optional observation camera for process tracking and software-based workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-theta lenses dependent / 3D option) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working width (X, axis max. 450mm depending on structure) New: software-controlled, variably adjustable working height (Z, axis max. 200/450 mm depending on the body) Optional other work areas - automatic material feed, etc. Air cooling due to low energy consumption Labeling speed: up to 8000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCAN cube ® 10 achieve labeling speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (through optional pilot laser) pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: incl. Process air control New: including suction control

Condition: reconditioned (used), Year of construction: 1989, Universal lathe with guide and lead screw Manufacturer: WEILER Model: Condor B Year of manufacture: 1989 - overhauled Newly painted RAL 7035 light grey Machine no.: 1401 With guarantee Accessories: Blsdpfog R S Rcsx Aqwel - 3-axis digital display FAGOR Innova 30i T, new - Chuck guard with electrical safety device, new - Quick-change tool holder base body, size B - Bed stop - Coolant system - Chip guard - Operating manual -used, as is -

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 24 h, Manufacturer: DURMA Model: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 watts Control system: Siemens Sinumerik 840D Operating hours: 24 hours Max. tube diameter: 170 mm Min. tube diameter: 20 mm (12 optional) Max. dimensions of square profiles: 120x120 mm Max. dimensions of rectangular profiles: 150x100 mm Max. profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. profile weight: 37.5 kg/m Max. material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeatability accuracy: +/- 0.05 mm Max. loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H, C, U, L *Footprint L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on the equipment variant Standard equipment Control system Sinumerik 840D Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for outputting analog values (power, speed, pressure) External CAD/CAM programming software Lantec with autonesting Bjdpfx Aqjdx Nfwjwoll Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 watts (including cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will be happy to provide you with further information.

Year of construction: 2025, condition: new, length 3100 mm height 120 mm width 120 mm Brand New Die Block List Price: 9.738 Euro Special Price on Request V-Openings: Bedpfjxxml Ijx Aqwsll - 80.0 mm / 85° / R 10.0 with guide rollers - 50.0 mm / 85° / R 5.0 with guide rollers - 35.0 mm / 85° / R 4.0 - 22.0 mm / 85° / R 2.5 - 2x Mounting Screws incl. Link Chain

Condition: new, Year of construction: 2025, CONDOR VC plus The new dimension in conventional precision lathes. A high-quality, powerful and energy-efficient precision lathe for the highly productive area of production and toolmaking, but also for training and further education High-quality, energy-efficient, precise and universally applicable in production, training and further education. It impresses with: future-oriented technology maximum accuracy durability user-friendly ergonomics minimum space requirement and a wide range of accessories. The consistent and innovative further development of the tried-and-tested Condor series is the economical and intelligent solution for your daily applications. Technical data: WORKING AREA Center height 180 mm Swing diameter over bed 360 mm Swing diameter over facing slide 190 mm Center width 800 mm TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 size 6 Spindle bore 57 mm Spindle diameter in front bearing 90 mm MAIN DRIVE Drive power 60 %/100 % ED - / 10.5 kW Speed range 25 - 4,000 min-1 Number of speeds infinitely variable FEED RANGE Number stepless Longitudinal 0.01 - 6 mm/rev Plan 0.003 - 2 mm/rev THREAD CUTTING RANGE Metric thread 0.1 - 20 mm REITSTOCK Quill diameter 50 mm Quill stroke 110 mm Internal taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 Bljdpfxsqwipnj Aqwsl Equipped with WEILER WTS 15 VC plus screen display - Large, clearly arranged 15" touch screen, rotatable and tiltable, resolution 1366 x 768 - Change of operating screens via swipe movements - Operating functions can be called up via app manager - Control panels can be freely configured, placed and scaled as required - Drawings / sketches can be imported from PDF files Can be zoomed individually via USB interface - Video-supported maintenance of the machine - Context help menu (instead of screen display WEILER VC plus) The machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. Please contact us regarding equipment.

Condition: excellent (used), two speed with switch belt gear Bsdpfx Aqoyxcxajwsll motor power 0,8kW clamp connection 380V

Condition: excellent (used), two speed with switch belt gear motor power 0,8kW clamp connection 380V Bjdpeyxl Nzefx Aqwell

Condition: good (used), Used Comi Cóndor HX / GMP 316L stainless steel Atex-rated horizontal centrifugal peeler. The unit features a perforated basket with a diameter of 1150mm. Maximum load 280kg, maximum cake capacity 222 litres. Internal design pressure rated at +0.5/-0.5 bar at 50°C. The unit is equipped with main drive, hydraulic powerpack, mounting springs and two control cabinets. Material: Stainless steel 316/316L Bjdpfxsynb Nue Aqwell Technical features Model: HX/GMP Maximum load (density 1.25 kg/dm³): 280 kg Condition: As is Manufactured by: COMI-CONDOR

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller track, carrier rollers -Conveyor roller: transport roller with bearing block and drive wheel -Diameter roll: 130 mm -Transport width: 1200 mm -Sprocket: Ø 165 mm -Total dimensions: 1365/166/H166 mm Bledpfsm Niy Sjx Aqwjl -Weight: 28 kg

Condition: good (used), Drill, pillar drill, column drill, column drilling machine -Manufacturer: Super Condor, pillar drill type 20 22 -Engine: unfortunately no type designation -Speed: Gearbox V-belt 8-speed -Table size: 255 x 255 mm, travel 670 mm -Spindle holder: MK2 -Spindle stroke: 120 mm -Feed device: yes -Projection: 205 mm -Column Ø: 100 mm Bledpfx Aet Hy Ureqwjl -Dimensions: 830/380/H1730mm -Weight: 205 kg with pallet