Used Constant for sale (1,234)

Condition: new, pressure 2,5 kN stroke 45 mm throat 90 mm Itjdpfx Aefv Av Ijbbjf Working height from to 80 - 220 mm table surface area 120 x 60 mm weight of the machine ca. 22 Kg dimensions 160 x 230 x 390 mm Hand presses with rack HZ 250 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order. Iodpoua Tbwsfx Abbstf

Condition: new, mileage: 11 km, power: 353 kW (479.95 HP), fuel type: diesel, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: air conditioning, electronic stability program (ESP), navigation system, Information in English Additional options and accessories Itedpfexuckxjx Abbof Lighting * Headlight type: LED Interior * Heated seats * Electric mirror adjustment * Rearview system * Stationary air conditioning * Tachograph: digital * Central locking system * Air-suspended seat Engine * AdBlue * MX engine brake * Number of fuel tanks: 2 * Capacity of tank 2: 620 liters Safety systems * ESP * Lane departure warning * Forward collision warning system Further information General information Cab: XG Drivetrain AdBlue system: Yes Transmission Transmission: 12-speed automatic Axle configuration Brakes: Disc brakes Front tire size: 315/60 R22.5 Rear axle 1: Tire size: 295/60 R22.5 Rear axle 2: Tire size: 315/60 R22.5, lift axle, steering Dimensions Wheelbase: 505 cm Interior Number of seats: 2 Number of berths: 2 Company information As the largest German DAF dealer, we are proud to offer the complete product range of the Dutch manufacturer in the Ruhr area and Cologne region, and to contribute to this success. Our goal is to relieve you of as much work as possible regarding vehicles and your day-to-day business. This includes the product itself, comprehensive services, and, last but not least, personal interaction. Let our consulting and our service convince you. Our team is at your disposal. With our four centrally located sites, we cover a large part of North Rhine-Westphalia and are quickly accessible for you. We are happy to visit you, or you can take the opportunity to visit us at our sales locations in Dortmund or Cologne. We always have a wide selection of new vehicles available for immediate delivery. Our new vehicle stock alone offers a constant selection of 70 to 100 vehicles — a real highlight in the market. Visit us at [website] or call us at [phone number].

Condition: excellent (used), Year of construction: 2019, ⚡ Optimize your production – faster, more efficiently, without chaos! ⚡ Are you looking for a solution that will improve the organization of production, packaging or picking? Discover the professional Virginio Nastri carousel table – designed for maximum efficiency and ergonomics. ⚙️ How does it work? The device operates on the principle of a rotating carousel – products are placed on a circular platform that rotates around its axis. -Elements are transferred to the next stages of the process in a smooth and orderly manner -Constant speed ensures work rhythm and reduces downtime -Ergonomic access from all sides increases operator comfort 🔗 Complete system – ready to work. The set also includes a Virginio Nastri CB/M3 conveyor belt , which enables automatic feeding of products – a perfect complement to the entire production line. 💡 Why is it worth it? Itjdpfx Aey Awamobbef ✔️ Increased work efficiency, ✔️better work station organization ✔️real time and cost savings ✔️high-quality workmanship – a proven brand ✔️ ready-made solution for integration with the production line. We have various models of carousels – for boxes or bags

Condition: used, mileage: 656,000 km, power: 290 kW (394.29 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2024, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,650 mm, loading space volume: 84 m³, loading space length: 8,100 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Through-loading device into the trailer * Frigoblock EK 25 U refrigeration unit * Driving operation with generator + 380 volt stationary operation * 2,000 kg tail lift Itjdpovcuddofx Abbjf * Medium-length cab * Automatic gearshift * Constant throttle * Euro 6 * Adaptive cruise control * Lane departure warning system * Navigation system * Differential lock * Full air suspension * reversing camera * Spoiler * Automatic air conditioning * Heated seats * Aluminum floor * Interior load compartment 8,100 x 2,480 x 2,200 mm * Tires front + hi. 385/55 R 22.5, mi. 315/70 R 22.5Only available as a train with Delivery only with matching trailer: * Flap at the front for loading into the truck * Drawbar pneumatically extendable * Frigoblock refrigeration unit EK 25 U * Drive mode with generator + 380 volt standby mode * 2,000 kg tail lift * Manufactured by Wüllhorst * Interior loading space 7,350 x 2,480 x 2,200 mm * 18,000 kg . * EZ 06/2018 * SAF axles * Disc brakes * Air suspension The price includes the truck and the trailer as a complete train. Several trains available, from year of construction 2015 - 2018---- Special equipment: Axle load front axle 8.0 t, Airbag driver's side, Audio system: CD radio (Bluetooth), Exhaust to bottom right, Battery 220 Ah, Brake connection standard and DuoMatic, Compressed air connection in cab, Compressed air tank aluminum, Compressed air unit high, Driving assistance system: Lane departure warning system, Tinted windscreen with band filter, Vehicle without trailer coupling, Generator 150 A, Info display 12.7 cm with additional display, Communication interface, Air compressor 2-cyl, Engine output front with preparation Frigoblock, Engine brake reinforced, Parameterizable special module, Reversing alarm acoustic (warning signal outside), Switch tail lift, Automatic circuit breaker, Seats in cab: Driver's seat Swivel seat comfort, Sun protection roller blind side window, Driver's door, Voltage transformer 24V / 12V 10 A, Steel rims 11.75x22.5 (on trailing axle), steel rims 11.75x22.5 (on front axle), additional 24V socket in passenger footwell, preparation 2nd control unit for level control, preparation CB radio, preparation cool box / refrigerator, additional heat insulation, additional heating (water) Further equipment: EURO 6 emissions standard, axle configuration: 6x2, trailer brake 2 - line, left-hand connections, trailer socket 24V / 15-pin, Antos, exterior mirrors electr. adjustable and heatable, rear axle differential lock, cab: width 2.30 m, cab: hydraulic tipping device, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric window lifter, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 ltr, Manual lifting roof (steel), Rear axle disk wheel 440, Body/structure: Chassis, comfort locking system, fuel tank: 290 ltr. aluminum, unregulated power steering pump, lift device trailing axle, air intake from front, engine 10.7 ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tyres, ramp mirror, spare wheel, residual heat utilization, front and rear axle disc brakes, seat cover/upholstery: fabric, seats in cab: Passenger functional seat, Front splash guard, Front axle stabilizer bar, Additional stabilizer bar, Rear axle / trailing axle, 24 V cab socket, Tachograph / EC tachograph, Aerodynamically shaped underbody panelling, Front underride guard, Preparation for toll collection, Cranked front axle

Condition: used, mileage: 656,000 km, power: 290 kW (394.29 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2024, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,650 mm, loading space volume: 84 m³, loading space length: 8,100 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Through-loading device into the trailer * Frigoblock EK 25 U refrigeration unit * Driving operation with generator + 380 volt stationary operation * 2,000 kg tail lift * Medium-length cab * Automatic gearshift * Constant throttle Ijdevcudkepfx Abbjtf * Euro 6 * Adaptive cruise control * Lane departure warning system * Navigation system * Differential lock * Full air suspension * reversing camera * Spoiler * Automatic air conditioning * Heated seats * Aluminum floor * Interior load compartment 8,100 x 2,480 x 2,200 mm * Tires front + hi. 385/55 R 22.5, mi. 315/70 R 22.5Only available as a train with Delivery only with matching trailer: * Flap at the front for loading into the truck * Drawbar pneumatically extendable * Frigoblock refrigeration unit EK 25 U * Drive mode with generator + 380 volt standby mode * 2,000 kg tail lift * Manufactured by Wüllhorst * Interior loading space 7,350 x 2,480 x 2,200 mm * 18,000 kg . * EZ 06/2018 * SAF axles * Disc brakes * Air suspension The price includes the truck and the trailer as a complete train. Several trains available, from year of construction 2015 - 2018---- Special equipment: Axle load front axle 8.0 t, Airbag driver's side, Audio system: CD radio (Bluetooth), Exhaust to bottom right, Battery 220 Ah, Brake connection standard and DuoMatic, Compressed air connection in cab, Compressed air tank aluminum, Compressed air unit high, Driving assistance system: Lane departure warning system, Tinted windscreen with band filter, Vehicle without trailer coupling, Generator 150 A, Info display 12.7 cm with additional display, Communication interface, Air compressor 2-cyl, Engine output front with preparation Frigoblock, Engine brake reinforced, Parameterizable special module, Reversing alarm acoustic (warning signal outside), Switch tail lift, Automatic circuit breaker, Seats in cab: Driver's seat Swivel seat comfort, Sun protection roller blind side window, Driver's door, Voltage transformer 24V / 12V 10 A, Steel rims 11.75x22.5 (on trailing axle), steel rims 11.75x22.5 (on front axle), additional 24V socket in passenger footwell, preparation 2nd control unit for level control, preparation CB radio, preparation cool box / refrigerator, additional heat insulation, additional heating (water) Further equipment: EURO 6 emissions standard, axle configuration: 6x2, trailer brake 2 - line, left-hand connections, trailer socket 24V / 15-pin, Antos, exterior mirrors electr. adjustable and heatable, rear axle differential lock, cab: width 2.30 m, cab: hydraulic tipping device, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric window lifter, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 ltr, Manual lifting roof (steel), Rear axle disk wheel 440, Body/structure: Chassis, comfort locking system, fuel tank: 290 ltr. aluminum, unregulated power steering pump, lift device trailing axle, air intake from front, engine 10.7 ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tyres, ramp mirror, spare wheel, residual heat utilization, front and rear axle disc brakes, seat cover/upholstery: fabric, seats in cab: Passenger functional seat, Front splash guard, Front axle stabilizer bar, Additional stabilizer bar, Rear axle / trailing axle, 24 V cab socket, Tachograph / EC tachograph, Aerodynamically shaped underbody panelling, Front underride guard, Preparation for toll collection, Cranked front axle

Condition: excellent (used), Wide Belt Sander FORMAT 4 Finish 1302 -used- Constant working height due to upper part adjustment, Combination unit with contact roller and sanding pad, Isdpfxsxnm Rco Abbetf Rubber-coated contact roller, Pneumatic activation of the contact roller, Electronic segmented sanding pad, Digital display for sanding height, Infinitely variable feed speed, Automatic belt centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Data ----- Working width: 1,300 mm Number of belts: 2 units Sanding belt dimensions: 1,310 x 2,200 mm Feed speed: 3.7–16 m/min Segment width sanding pad: 55 mm Max. workpiece thickness: 170 mm Min. workpiece thickness: 5 mm Extraction port Ø: 2x200 mm Motor power: 18.5 kW Second motor power: 15 kW Dimensions (LxWxH): 1,950 x 2,250 x 2,600 mm Weight: 2,400 kg Quality Information: - Belt tracking / balance checked - Sanding pad checked / refurbished - Height adjustment checked - Thorough basic cleaning - Electrical system checked - Immediately ready for use

Condition: new, Year of construction: 2025, functionality: fully functional, NEW Equipment for feeding defrosted fish raw materials to the blanching area Equipment for blanching fish raw materials - Provide mechanized or manual delivery of fish raw materials (arranged in one or more layers) to the heat treatment area; · Provide heat treatment (blanching) liquid of fish raw materials (a mixture of water, salt water, water vinegar) or in a steam environment; · The speed of the blanching conveyor is variable; · The blanching temperature is adjustable (50-100 C) and constant maintainable; · Impact insulation provided in the blanching area to prevent heat loss; · Ensure continuous supply of thermally processed fish raw materials and packaging area; · Provide water or steam connections and the possibility of draining overflow liquid or condensate and blanching liquid directly into the sewage system; Blanching power 600 kg per hour Equipment for dosing fish raw materials in cans and packing cans - Equipment, (can dispenser for Hansa cans type), which provides a can sequential feeding to the raw material dosing area. Speed ​​min. 75 up to 90 cans/min. · Equipment that provides semi-automatic dosing of blanched fish raw materials in cans: manual placement of raw materials in the portioning area, mechanized portioning and mechanized dosing of the fish portion in a box. The operating speed of the line must be matched with the operating speed of the cans dispenser. Permissible deviation +- 4 grams Equipment for the accumulation of filled cans, which allows the accumulation of at least 2 min of packing capacity, min 150 cans; · Equipment that provides continuous weighing of cans with the possibility of diverting cans that are below the permissible deviation of the specified weight to the forgiving conveyor, and ensures the return of cans to the flow after the forgiving; · The equipment is easy to service and sanitary. · Number of employees servicing the equipment: 4 employees Automatic control unit - Provides automated equipment control and the ability to adjust the speed of equipment operation. Equipment: You can send separate parts if needed. 1- Fillet conveyor – 1pcs 2- Blanching conveyor line – 1pcs 3- Fillet dosing machine – 1pcs 4- Checkweigher – 2pcs 5- Can dispensing machine – 2pcs 6- Rotary table – 1 pcs Itjdpfxov Dftxe Abbef 7- Conveyor line – 8pcs Uses The line is designed for blanched fish fillets. Automatic filling of blanched fish fillets into "Hansa" type cans and weight control with feeding to the capping machine.

Condition: used, mileage: 419,200 km, power: 175 kW (237.93 HP), first registration: 06/2013, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro5, total width: 2,600 mm, total height: 3,780 mm, Year of construction: 2013, Equipment: air conditioning, parking heater, tail-lift, * Mercedes Benz 1824 L AXOR with multi-compartment refrigerated box body Carrier Supra 950 – BÄR tail lift 2 t * Diesel – Displacement: 6,374 cc – 175 kW / 240 hp – Euro 5 – Green emissions sticker * Body dimensions: length xxx m x width xxx m x height xxx m – Wheelbase: 4,900 mm * 2 seats – Automatic transmission – Air conditioning – Suspension: leaf/air – Trailer coupling – Axle configuration: 4x2 * Retarder – Permissible GVW: 18,000 kg – Curb weight: 10,550 kg – Payload: 7,450 kg * Truck 1: 1824 L – Year/First reg. – Mileage: 400,500 km – VIN: WDB 9505361L652633 * Truck 2: 1824 L – Year/First reg. – Mileage: 513,750 km – VIN: WDB 9505361L752647 * Truck 3: 1824 L – Year/First reg. – Mileage: 422,750 km – VIN: WDB 9505361L756551 * Truck 4: 1824 L – Year/First reg. – Mileage: 419,250 km – VIN: WDB 9505361B980262 * Vehicles available immediately and ready for collection – Vehicles are unbranded * More pictures available on request or after the Easter holidays * Also available: 4 Mercedes Benz Axor 1824 refrigerated box trucks with first registration 2012/2013/2014 * Please schedule an appointment for viewing – Price is per vehicle * Contact: Mr. Andreas Vogel * Information provided online is non-binding and for description purposes only. * They do not constitute guaranteed features. * The seller assumes no liability for typographical or data transmission errors. * Subject to prior sale, errors and changes. Optional equipment: Wheel bolt covers, storage on engine tunnel, drawbar coupling: tow hitch, audio system: CD radio, 220 Ah battery, aluminum air tanks, cab: comfort suspension (1.8 Hz), cab version: S (short with rear panel extension), 100 A alternator, graphic info display with eco-meter, rear tail lift lights, heated single-chamber air dryer, side spare wheel hoist, tail lift switch, circuit breaker, seats in cab: comfort driver's suspension seat incl. horizontal suspension, voltage converter 24V/12V 15A, steel rims 9.00x22.5, 12 volt socket, 24V socket in cab, front underrun protection, provisions for cool box/fridge, pre-installation for phone/fax, dropped front axle, heat protection glazing, auxiliary air heater. Further equipment: Isdpfx Ajyz Haaobbjtf EURO 5 emission standard, axle configuration: 4x2, front axle load: 7.5 t, electrically adjustable and heated exterior mirrors, exterior mirror left, outside temperature display, long-distance cockpit, steel sunroof, rear axle differential lock, cab: S (short), suspension: leaf/air, electric window lifts, 6-speed gearbox – type: G 85-6, urea tank (AdBlue): 95 l, rear axle H 6, crown wheel 440, interior pollen filter, chassis/body: chassis, 210 l plastic fuel tank, Axor 2 model update, engine 6.4 l – 175 kW diesel (OM 906 LA), engine start/stop system, constant throttle engine brake, spare wheel under end of frame, disc brakes, passenger single seat fixed, rear axle stabilizer, front axle stabilizer, Telligent brake system with ABS+ASR, fixed rear underrun protection, immobilizer, permitted gross weight 18.00 t

Condition: used, mileage: 94,510 km, power: 210 kW (285.52 HP), first registration: 08/2007, fuel type: diesel, empty load weight: 7,880 kg, maximum load weight: 10,120 kg, overall weight: 18,000 kg, tire size: 295/80R22.5, axle configuration: 4x2, wheelbase: 5,100 mm, brakes: constant throttle, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, number of seats: 6, loading space length: 6,500 mm, loading space width: 2,460 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, cabin, differential lock, parking heater, traction control, Vehicle location: Bovenden, long cab, air suspension seat, electric window left, electric window right, air conditioning, sun visor, 8-speed manual transmission, ABS (anti-lock braking system), traction control (ASR), constant throttle, differential lock, storage box, leaf/air suspension, aluminum tank, lashing rails, underrun protection, side aluminum side protection, swinging tailgates, roof hatch, green environmental sticker. Wheelbase: 5100 mm. Body: flatbed with aluminum sideboards and aluminum chequer plate floor. Aluminum chequer plate floor! Disc brakes on front and rear axles, side windows at rear left and right! Loading height approx. 1250 mm! Spare wheel available at extra cost! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Ijdpfjyz Tmaex Abbotf

Condition: used, mileage: 129,505 km, power: 170 kW (231.14 HP), first registration: 12/1998, fuel type: diesel, empty load weight: 9,390 kg, maximum load weight: 5,610 kg, overall weight: 15,000 kg, tire size: 11R22.5, axle configuration: 4x4, wheelbase: 3,260 mm, next inspection (TÜV): 12/2025, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 3, loading space length: 4,000 mm, loading space width: 2,330 mm, loading space height: 600 mm, Equipment: ABS, additional headlights, all wheel drive, cabin, crane, differential lock, fog lights, immobilizer system, low noise, power assisted steering, trailer coupling, Vehicle location: Bovenden. Steel body, optional driver's house, 1x air-suspended seat, double bench seat, rear window, electric mirrors, 6-speed manual gearbox, ABS (anti-lock braking system), constant throttle, PTO (power take-off), chassis side paneling, differential lock, fog lights, work lights, rotating beacon, leaf suspension, trailer coupling with air, light, and hydraulic connections, low-noise G1, underride protection, swinging tailgates, roof hatch, rear-mounted crane, emergency stop, grab control, foldable, hydraulic 2-point support, 3x hydraulic extensions, red environmental badge. Isdpfxsyz Tl Ns Abbetf Wheelbase: 3260 mm. Body: Meiller three-way tipper body with demountable rear crane Hiab 085-3. Differential lock on front and rear axles, 6.1t front axle, rear axle H4 10.8t ring gear 410, ABS, PSM, engine brake with constant throttle, Meiller 5-piston pump Type 255/1, MB 60-2c MPA PTO with low installation, N-speed. Load diagram: 2.1 m – 3800 kg, 3.6 m – 2300 kg, 5.5 m – 1440 kg, 7.4 m – 1040 kg, 9.3 m – 810 kg! Loading height approx. 1510 mm! The vehicle can also be purchased without crane for €27,900 net! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: used, mileage: 990,000 km, power: 130 kW (176.75 HP), first registration: 02/2008, fuel type: diesel, empty load weight: 4,090 kg, maximum load weight: 3,400 kg, overall weight: 7,490 kg, tire size: 205/75 R17,5, brakes: other, color: white, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 24,500 mm, total width: 24,500 mm, total height: 59,000 mm, Year of construction: 2008, front tire size: 205/75 R17,5, Equipment: ABS, air conditioning, cruise control, differential lock, ABS, work lights, electrically adjustable and heated exterior mirrors, roof hatch, differential lock, short cab (local haulage), air-suspended driver seat, leaf-air suspension, automatic transmission, lift and lower function, standard air conditioning, single-stage constant throttle, Euro 5 engine, entertainment: radio/CD, cruise control, rear wall viewing window, dual passenger seat, vehicle is not drivable, air compressor defective, sold as a parts donor for dismantling! Iedpfx Ajyzkclobbjtf

Condition: used, mileage: 999,999 km, power: 130 kW (176.75 HP), first registration: 02/2008, fuel type: diesel, empty load weight: 4,090 kg, maximum load weight: 3,400 kg, overall weight: 7,490 kg, tire size: 205/75 R17,5, brakes: other, color: white, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 24,500 mm, total width: 24,500 mm, total height: 59,000 mm, Year of construction: 2008, front tire size: 205/75 R17,5, Equipment: ABS, air conditioning, cruise control, differential lock, ABS, work lights, electrically adjustable and heated exterior mirrors, roof hatch, differential lock, short cab (for local distribution), air-suspended driver's seat, leaf-air suspension, automatic transmission, lift and lower function, climate control: standard, single-stage constant throttle, Euro 5 engine, entertainment: radio/CD, cruise control, rear wall inspection window, double passenger seat, hydraulically height-adjustable fifth wheel operable from the driver's seat, vehicle is not drivable, air compressor defective, offered as a parts donor for dismantling! Itedpjyzkcfofx Abbof

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min Iodefg E Hpopfx Abbjtf total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Year of construction: 1980, condition: ready for operation (used), Various small machines from a packaging factory are available. 1) Multi-spindle paper drilling machine Constanting Hang 106MK/8, year of manufacture: 1980, drilling spindles: 8, drilling range: 3mm-8mm, hole spacing range: 36mm-630mm. Documentation available. 2) Vibrating table Müro 70x72 ST, paper dimensions X/Y: 700mm/450mm, max. stack height: 100mm, weight: approx. 50kg. 3) Small extraction unit Kongshilde TRL 40, year of manufacture: 2023, machine dimensions X/Y/Z: approx. 900mm/1000mm/950mm. 4) Conveyor belt, year of manufacture: 2018, belt height: approx. 970mm, belt dimensions X/Y: approx. 2300mm/600mm, machine dimensions X/Y/Z: approx. 2400mm/950mm/1050mm. An on-site inspection is possible. Only a package sale is possible. Itedpfxjy Aaffe Abbjf

Condition: used, mileage: 496,245 km, power: 265 kW (360.30 HP), first registration: 12/2016, fuel type: diesel, empty load weight: 9,575 kg, maximum load weight: 8,425 kg, overall weight: 18,000 kg, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 5,200 mm, next inspection (TÜV): 02/2026, brakes: engine braking, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 7,340 mm, loading space width: 2,500 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, seat heater, spoiler, tail-lift, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, sleeper cab, 1x air-suspended seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, differential lock, fog lights, storage box, leaf/air suspension, trailer coupling with air and electric connection, aluminum fuel tank, lashing rails, mechanical ramps, side aluminum underrun protection, roof hatch, standing aluminum tail lift, green emissions sticker. Itsdpoyzzdmofx Abbef Wheelbase: 5200 mm. Body: Ewers beverage box body with load securing & 2-ton Dautel DL 2000S tail lift. 7.5t front axle, rear axle with 440 hypoid gear, 13t. Electronic braking system with ABS and ASR, disc brakes on front and rear axle, condensate monitoring for compressed air system, front axle stabilizer, aluminum front underrun protection, residual heat utilization, comfort central locking, economy driving program, pre-installed for toll collection, high-performance engine brake, ESP, lane keeping assist, attention assist, Active Brake Assist, Mercedes PowerShift 3. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors excepted!

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 75080154.1/TKT 2, type of input current: three-phase, input voltage: 400 V, input current: 40 A, 30 C – FINN-CONVEY V307 Conveyor 3-Level Table System – Modular Cutting Room Conveyor Description For sale is a FINN-CONVEY V307 conveyor 3-level table system designed for textile cutting room operations. This system functions as a modular conveyor-based table solution for material handling and fabric movement within production. It enables efficient workflow between spreading, buffering, inspection, and cutting stages. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 (unit 35 C). Ijdpfoy Akpzex Abbotf This integration significantly reduces manual handling and downtime, especially during fabric roll changes and feeding operations. The video material also shows a GERBER XLS-125-180-L Spreader (unit 32 C), which was used in the same production line. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Includes • FINN-CONVEY V307 conveyor table system • Multi-level conveyor structure (3 levels) • Integrated belt transport system • Drive motors and transmission units • Sensor components for positioning and control • Electrical control cabinet Technical Details • Manufacturer: Finn-Convey • Model: V307 • Type: Conveyor table system • Application: Fabric handling and transport in cutting rooms • Configuration: Multi-level modular system • Levels: 3-level buffer structure • Power: Industrial 3-phase system Key Advantages • Full integration with automated cutting systems (Lectra line ready) • Reduced manual labor in fabric feeding and handling • Continuous material flow for optimized cutting efficiency • Modular system adaptable to different production layouts • Industrial-grade mechanical construction for long service life Production Efficiency The 3-level buffer structure allows continuous operation of the cutting machine by maintaining a constant material supply. This reduces idle time and enables • Higher throughput in cutting operations • Efficient batch handling • Improved workflow synchronization across production stages Build Quality Finn-Convey systems are known for their robust mechanical construction, designed for long-term industrial use. With proper maintenance, these systems are built to operate reliably for decades. Condition Used industrial condition Fully functional prior to shutdown Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Cutting room conveyor systems • Fabric transport and handling • Workflow optimization in garment production • Textile production lines Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: used, Year of construction: 2023, Exhibition Machine Garbsen CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and Milling Made for You! This numerically controlled machining center is equipped with a comprehensive range of accessories and tools for milling and drilling, enabling it to meet every requirement in the field of wood processing. Highly efficient – with drilling spindles reaching up to 8,000 rpm – and featuring technology that includes the most robust spindle available on the market, offering more than 1,000 hours of maintenance-free operation. Fully equipped – the suction cups can be individually configured with the TV FLEX worktable to adapt the machine precisely to your requirements. Easy and intuitive programming thanks to the integrated Cad-Cam MAESTRO CNC software. User-friendly operation is ensured by the lowered machine frame, which provides unrestricted access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine base, and the PRO SPACE variant requires no additional structural safety measures. Robust Construction The supporting structure consists of an especially sturdy monolithic steel base, ribbed for stability and durability. The extra-wide bearing surface is purpose-designed to provide the machine with stability, ensuring constant precision in all working conditions. Anchoring to the floor is not required. The base forms a large, solid foundation for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support, withstanding the highest stress, which ensures superior quality performance and greater accuracy. The moving gantry is a solid single piece anchored to the base, running on high-quality prismatic guides with ball bearing carriages. The working unit is mounted to this and moves along the Y and Z axes on prismatic guides with ball bearing carriages as well. Movement of the lower movable unit (X-axis) and the working unit along the gantry (Y-axis) is driven by a helical toothed rack and pinion system; this produces greater tooth-by-tooth thrust, achieving higher acceleration and increased speed on the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, providing perfect balance under dynamic load and withstanding significant acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, enabling superior surface finish quality as vibrations are completely eliminated. Travel along the X-Y-Z axes is achieved with brushless motors powered by static inverters. These provide: Itodpfx Abjytrgzobjf - Reduced processing times due to improved acceleration - Increased positioning accuracy due to high-resolution encoders - Elimination of setup tasks at machine startup thanks to absolute encoders - Elimination of general maintenance tasks, as the brushless system has no brushes Axis movement management and general operation of the working elements...

Condition: used, mileage: 324,975 km, power: 338 kW (459.55 HP), first registration: 07/2019, fuel type: diesel, empty load weight: 7,375 kg, maximum load weight: 10,625 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,600 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, spoiler, traction control, Vehicle location: Bovenden, Lg. Haus, 1x comfort seat, 1x sleeper berth, heated seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, auxiliary heater, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, tipper hydraulics, automatic transmission, roof spoiler, side spoilers, differential lock, fog lights, work lights, beacon, leaf-air suspension, aluminum tank, alloy wheels, roof hatch, green environmental badge. Wheelbase: 3600 mm, Transmission 12+2 GZ 2700 DD, air conditioning, additional heater, navigation system, 1x sleeper berth! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Itsdpfxeyrqq Ne Abbjf

Condition: used, Year of construction: 2007, TECHNICAL DATA Travel X 760 mm Travel Y 510 mm Travel Z 610 mm Iedpfx Aswud Afebbjtf Table clamping surface 1020 x 510 mm T-slots / table 5 x 18 mm x 100 mm Distance spindle to table min./max. 150/762 mm Spindle taper steep taper DIN 69871 ISO 40 Spindle speeds 10–10000 rpm Drive power (30 min/continuous duty) 11 kW Max. torque 236 Nm Constant power from 500 rpm Coolant tank 190 l Linear guides with ball bearings in X, Y, Z axes Rapid traverse X/Y/Z 30 / 30 / 20 m/min Feedrates programmable 3.0–7600 mm/min Positioning accuracy ±0.01 mm Repeatability ±0.005 mm Automatic tool changer (double-arm) 24 positions Internal cooling Chip conveyor

Year of construction: 2004, condition: excellent (used), TECHNICAL DATA Travel X 760 mm travel Y 510 mm travel Z 610 mm table clamping surface 1020 x 510 mm T-slots / table 5 x 18 mm x 100 mm distance spindle to table min./max. 150/762 mm Spindle mounting steep taper DIN 69871 ISO 40 spindle speeds 10 - 10'000 rpm Drive power (30 min/const. ED) 11 kW Torque max. 236 Nm Power constant from 500 rpm Coolant tank 190 l Itodpfxjl Tpmds Abbjf Ball bearing linear guide in X,Y,Z axes Eilang X / Y / Z 30 / 30 / 20 feeds programmable 3,0 - 7600 mm/min positioning accuracy +/- 0,01 mm repeatability +/- 0,005 mm milling feed rate 3,0 - 11400 mm/min table load 1000 kg Automatic tool changer (double arm) 24 stations Max. Tool diameter 80 mm Max. tool length Tool length 300 mm Max. Tool weight 7 kg Machine weight 4700 kg Space requirement L x W x H (footprint) 3870 x 4170 x 2775 mmINCL. - Coolant system - Coolant spray gun - Chip splash guard cabin - Flushing system to support chip disposal - Machine light - set of machine shoes - rigid thread cutting - spiral conveyor in the chip room - Pocket milling with islands - Electronic handwheel - ULTIMAX 4 control - 2 VGA color screens (text + graphics) - 2 software units (1 x plain text dialog programming + 1 x for ISO code programming) via interface RS-232 C / V24 access for CAD / CAM or external programming station - Pentium technology, 1.6 GB hard disk, 64 MB RAM, parallel and serial data interfaces, DOS compatible 3.5 '' 1.44 MB drive. System internal self-diagnosis, DOS directory structure, software version 2.xx Servo technology DUAL DSP 40MHz

Year of construction: 2015, operating hours: 2,420 h, condition: ready for operation (used), travel distance X-axis: 300 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 5,500 kg, spindle motor power: 2,000 W, spindle speed (max.): 600 rpm, number of axes: 2, Cylindrical grinding machine manufactured in 2015. This GEIBEL & HOTZ RS 600 C features a maximum swing diameter of 275 mm and a center distance of 600 mm. It is equipped with a grinding spindle motor power of 5.5 kW and operates at speeds ranging from 700 to 2100 rpm. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ RS 600 C machine we have for sale. Contact us for further details. • Center distance: 600 mm • Center height: 140 mm • Max swing diameter: 275 mm • Max workpiece weight between centers: 100 kg • Max workpiece torque (flying): 40 Nm (including clamping devices)Workpiece spindle • Taper: MK4 and KK5Tailstock • System: Cylindrical screw pressure spring • Operation: Manual via hand lever • Quill stroke: approx. 40 mm • Taper: MK4Grinding spindle • Arrangement: Left • Motor power: 5.5 kW • Speed: 700–2100 rpm • Bearing: Precision rolling bearings • Lubrication: Lifetime lubricationGrinding wheel • Standard size: 400 × 50 × 127 mm • Bore: 127 mm • Width: 20–50 mm • Taper: 5° • Max diameter: 55 mm (taper reference) • Flange diameter: 175 mm • Speed range: 15–35 m/s (constant cutting speed control)AxesX-axis (= FEEDBACK MOVEMENT) • Drive: Electromechanical with ball screw • Feed rate: 0.01–8000 mm/min • Setup: Electric handwheel or direction push button • Measuring system: Glass scale, internal resolution 0.0005 mmZ-axis (= TABLE MOVEMENT) • Drive: Electromechanical with ball screw • Table speed: 0.01–12000 mm/min • Setup: Electric handwheel or direction push button • Measuring system: Rotary encoder, resolution 0.001 mmControl / Electrical • The control panel is mounted to the machine stand using a swivel bracket. • Control system: Siemens 840D • Drive system: Siemens SINAMICS • Emergency stop components, safety integrated • Motor protection switch, fuses: Siemens • Connectors: WAGO Harting connectors in the work area Itodpfoyzn Dmsx Abbsf • Operating voltage: 400 V, 50 Hz, 3 phase • Network type: TN network, without residual current device (RCD) • Control voltage: 230/24 V • Installed electrical power: approx. 14 kW / 18 kVA • Compressed air: Oil-free compressed air, approx. 5 bar • Control cabinet: Air conditioning unit • Electrical cabinet equipment: Interior lighting • Service socket: 230 V / 3 APneumatics / Coolant • Compressed air requirement: approx. 5 bar, oil-free • Coolant tank capacity: approx. 300 L • Coolant pump capacity: 50 L/min at 3.5 bar • Cleaning pump capacity: 20 L/min at 1.5 barOperating data • Operating hours: 2,420 hours Additional equipment • Air extraction unit • Capacity: approx. 1000 m³/h • Dimensions: approx. 460 × 840 × 580 mm • Three-jaw chuck • Diameter: 160 mm • Operation: Manual • Weight: approx. 10 kg

Condition: used, Year of construction: 2014, Technical details: grinding diameter max.: 3-220 mm regulating wheel width: 500 mm max. width of grinding wheel: 500 mm weight of the machine ca.: 16 t. dimensions of the machine ca.: 12 x 10 x 8 m. grinding wheel diam. min/max.: 420-610 grinding wheel diameter - width-internal grin: 304,8 x 500 mm Regulatin wheel diameter min/max.: 300-350 mm The machine is currently designed for plunge grinding JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Itodpfx Ajt Uw Avsbbjf Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. *

Condition: used, mileage: 179,110 km, power: 265 kW (360.30 HP), first registration: 02/2008, fuel type: diesel, empty load weight: 12,460 kg, maximum load weight: 13,540 kg, overall weight: 26,000 kg, tire size: 315/70R22.5, axle configuration: 6x2, wheelbase: 2,600 mm, next inspection (TÜV): 08/2026, brakes: constant throttle, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, cabin, central locking, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, company's premises, 1x comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, cruise control, 16-speed manual transmission, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, raised exhaust, differential lock, fog lights, beacon, storage box, leaf-air suspension, air+electric trailer coupling, aluminum fuel tank, low-noise G1, 2nd axle with lift steering, under-run protection, side aluminum underride guard, roof hatch, green environmental badge. Iodpfx Aoxuhcasbbjtf Wheelbase: 2600 mm Body: Asphalt cooker GTK14S ex-Strabag! Matching asphalt cooker trailer -88912- available at extra cost! ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE, subject to changes, prior sale and errors excepted!

Condition: used, mileage: 273,007 km, power: 294 kW (399.73 HP), first registration: 09/2011, fuel type: diesel, empty load weight: 16,260 kg, maximum load weight: 9,740 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 4,200 mm, next inspection (TÜV): 09/2025, brakes: constant throttle, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 3, Equipment: ABS, additional headlights, cabin, cruise control, differential lock, fog lights, hydraulics, low noise, onboard computer, power assisted steering, seat heater, Vehicle location: Bovenden, company premises. 1x comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, cruise control, air horn, ABS (anti-lock braking system), constant throttle, power take-off, AS-Tronic automatic transmission, differential lock, fog lights, beacon, storage box, leaf-air suspension, low-noise G1, last axle hydraulically steered, side aluminum underride protection, roof hatch, green environmental badge. Wheelbase: 4200 mm. Engine D2066LF41 – 400 HP / 294 kW EURO5 SCR – 1900 Nm C-R OBD2. Transmission: ZF 12 AS 2130 DD-ASF MAN TipMatic, fuel tank 400l (right side) and 35l AdBlue, MAN BrakeMatic (electronic braking system). Driver's cab 'L' 2240mm wide, 2280mm long, frame height 105cm. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Iedevvk Rtspfx Abbstf