Used Costell Hydraulic Aggregate for sale (15,472)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: Kodjy S Rw Dspfx Aarolt The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), functionality: fully functional, saw blade diameter: 180 mm, We offer this very good Format-4 300-24-006 aggregate. This was ordered and rarely used, sat on the shelf for the last couple of years. Will come with a carpeted timber box we've made for it. Kedpfeyrpk Ujx Aarolt Model Number: Format4 300-24-006 Interface: HSK-63F Gear Ratio: 1:1. Max Input Speed: 15,000 RPM. Max Torque: 20 Nm. Angle Adjustment: Manual swivel from 0° - 100°: Any other questions, please get in touch. Currently listed on the Felder website for £5346 - €6153

Condition: ready for operation (used), functionality: fully functional, control type: PLC-controlled, 3-roll bending machine Manufacturer: FERRO S.R.L. Model: CIT - 1 Working area: 2000 x 6 mm Hydraulic tilting support for workpiece changes Control panel Emergency stop via cable pull Condition: good / immediately ready for use Klodpfjyw S E Hox Aarot

Condition: ready for operation (used), Year of construction: 1993, Immediately available ex location: Hydraulic Guillotine Shear Steiner Type HTS 30 113 Year of manufacture: 1993 CNC-controlled digital backgauge 1000 mm Ksdpfx Aasy Tmydsrelt Light barriers Cutting length 3200 mm Material thickness up to 13 mm Throat depth 300 mm Stroke 300 mm Drive power 15 kW Weight 15 t Price: EUR 6,500 plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1969, Immediately available ex location: Hydraulic Vertical Honing Machine Nagel Kljdpfx Aaey Tmuzerst Type VS 8 – 50 / S Year of manufacture: 1969 Honing diameter: 10 – 120 mm Honing length: 10 – 750 mm Table clamping surface: 920 x 350 mm Throat depth: 440 mm Automatic feed Complete set of honing tools, honing heads from 10 – 120 mm, honing mandrels, clamping pots Spindle drive: 4 HP Spindle rotation: 3 HP Weight: 5 tons Priced at EUR 4,500.— plus VAT ex location

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Hydraulic high-speed press Lauffer Kljdsy Tmuhspfx Aaret Type EPT 25 Year of manufacture: 1979 Inspected according to UVV Press force 25 t Stroke 160 mm Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Ram 250 x 210 mm Weight 2 t Drive power 7.5 kW Price: EUR 2,750 plus VAT, ex-location.

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Hydraulic double-column straightening press Dunkes Type HDSR 75 Year of manufacture: 1977 Kedpfoy Tmt Rox Aarelt Pressing force: 165 t 3 cylinders, pressing force per cylinder: 75 / 65 / 25 t Table: 1500 x 500 mm Stroke: 350 mm Drive power: 3 / 15 kW Weight: 6 t Price: EUR 2,750— plus VAT, ex location

Condition: used, manufacture Hydrap In our assessment, the machine is in good used condition and can be inspected under power by appointment. Kodpfsy Tpq Sex Aarelt Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: Serien-Nr.: A84P 01022, overall weight: 1,445 kg, Maximum pressure: 350 bar Kljdpfsy Tad Nox Aarot Flow rate: 840 l/min Main pressure relief valve setting: 760 bar

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: Serien-Nr.: A84P 01021, overall weight: 1,445 kg, Technical data: Kjdpfey Tab Uex Aarslt Maximum pressure: 350 bar Flow rate: 840 l/min Main pressure relief valve setting: 760 bar

Condition: used, Year of construction: 1993, Max. cutting length: 4000 mm Max. sheet thickness: 4 mm steel Controlled rear stop up to 1,000 mm side stop and table extensions cut length limit cut edge illumination safety fence, roller with safety switches Weight: approx. 8500 kg Kedpfx Aasf Nwvfjrslt

Condition: used, Year of construction: 1997, Thread(e) e.g. a 40 mm hole in 20 mm steel Stroke triggering via foot switch Including finder for pegging and setup Assortment of tools is included in the price Punching force: 1000 kN Klodpfx Aeizuhpoaret mass: 2400 kg punching force: 1000 kN

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: Serien-Nr.: A84P 01020, overall weight: 1,445 kg, Technical specifications: Kedpfxjy S U Ute Aarjlt Maximum pressure: 350 bar Flow rate: 840 l/min Main pressure relief setting: 720 bar

Condition: used, Year of construction: 1983, Max. cutting length: 3,000 mm Kodpfx Aor D Tnwjarolt Max. sheet thickness: 8 mm steel Motorized rear stop with fine adjustment via handwheel up to 1000 mm cutting length limitation knife sharpened Weight: 6,800 kg

Condition: used, Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized rear stop up to 1000 mm with fine adjustment via handwheel Crown angle adjustment knife sharpened operation manual Kljdpoqmvlrjfx Aaret Weight: approx. 1400 kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: Serien-Nr.: A84P 01019, overall weight: 1,445 kg, Maximum pressure: 350 bar Klodpfsy S U R Iex Aarjt Flow rate: 840 l/min Main pressure relief valve setting: 720 bar

Condition: good (used), Year of construction: 1990, machine/vehicle number: 8390, Offer 26135 Technical data: - Pressing force, continuously adjustable 25 t - Stroke, continuously adjustable 300 mm - Torque at the rotary shafts 6900 Nm - Speeds at the lower rotary shafts 4 + 8 rpm - Speeds at the upper shaft, continuously adjustable 2 - 12 rpm - Digital + analog display of actual values - Drive 400 V / 6 kW - Space requirement approx. W 1480 x H 1100 x D 800 mm - Weight approx. 1300 kg Klsdpoy Tyadefx Aaret - Bending capacity when tools are available - Edges with W 125 120 x 16 mm - Straightening without straightening bar 100 m³ - Pipe (pressing process) 2 " - Ring bending (flat material, upright) 80 x 10 mm - Ring bending (round tube) 60 x 4 mm - Mandrel bending 60 x 2.6 mm - Round bending (flat) 70 x 12 mm - Bending tools: - Bending tools, pointed tools + prisms - Various other pipe bending tools, incomplete

Condition: good (used), Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder -Hydraulic pulling cylinder: with integrated hand pump -Traction: 50 tons -Stroke: 110mm -Piston rod: Ø 80 mm -Shots: inside 145 x 47 mm, see photos -Number: 1x cylinder available Kjdpfslxulcsx Aarelt -Price per piece -Dimensions: 810/155/H410 mm -Weight: 66 kg/pc.

Condition: used, functionality: fully functional, Hydac FCU2210 Fluid Control Unit Hydraulic Service Unit with Accessories Kedpfxev I Tdgj Aarelt # 7044

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t Kljdpfx Aex Uru Noarot dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: good (used), pressure 250 t passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m Kjdpfx Asxcblwoarelt

Condition: used, Double-acting hydraulic cylinder, MAE, suitable for MAE hydraulic press, type HY-DSF 160. Flange cylinder, ideal for workshop press. Machine year of manufacture: 1970 Cylinder No.: 6017 Cylinder stroke: approx. 600 mm Operating pressure: 320 bar Piston rod: Ø 220 mm Piston diameter: Ø 250 mm Cylinder pressing force at 325 bar: approx. 160 tons Cylinder diameter: 255 / 370 / 390 mm Overall length with piston rod retracted: approx. 1350 mm Piston rod extension: 70 mm Klsdjy Tptaspfx Aaret - Hydraulic connection thread G 1 1/2" - Flange connection on the cylinder base, inner diameter approx. 118 mm, outer diameter 165 mm, 6x M36 threaded holes, pitch circle 215 mm - Thread in the piston rod M20, pitch circle 160 mm - Mounting nut on the cylinder tube, outer diameter 418 mm Weight: 915 kg The hydraulic cylinder is used and comes from a warehouse clearance.

Condition: like new (used), Year of construction: 2026, pressing force: 20 t, For sale is a C-frame assembly and small-series production press from the manufacturer DURENDUS with a maximum pressing force of 20 tons. The machine has a table size of 700 × 920 mm, a maximum installation height of 550 mm, and a stroke of 400 mm, making it suitable for assembly work, small-series production, pressing operations, and straightening processes in industrial applications. ##### Technical data + information: C-frame assembly and small-series production press – 20 tons – 700 × 920 mm ==== General information - Design: C-frame / single-column press - Manufacturer: DURENDUS - Pressing force: 5–20 tons (adjustable) - Maximum installation height: 550 mm - Table size: 700 × 920 mm - Press head: Ø 100 mm - Table height above the ground: 1,000 mm - Overall dimensions (W x D x H): 900 × 900 × 2,340 mm - Total weight: approx. 1,200 kg - T-slots: DIN 650 – 22 mm or according to customer requirements - Forklift pockets: available - Press area lighting: available ==== Hydraulic cylinder - Stroke: 0–400 mm (adjustable) - Cylinder diameter: Ø 110 mm - Piston rod diameter: Ø 65 mm - Maximum working pressure: 280 bar - Return speed: 50 mm/s - Working speed: 10 mm/s Kljdpfxoy Sx Uwo Aaret - Idle speed: 10 mm/s - Pressure build-up time: max. 2 sec. (steel on steel) ==== Hydraulics & drive - Hydraulic pump: ASC - Delivery rate: 24 l/min - Motor power: 3 kW - Pressure accuracy: ±5 bar - Tank volume: 60 l - Valve technology: DUPLOMATIC - Filter technology: FILTREC - Oil level monitoring: electronic - Cooling: oil-air cooling - Hydraulic unit: mounted at the top rear ==== Control system - Operation: foot pedal or hand lever - Pressure setting: via rotary control - Stroke limitation: via adjustable sensors - Selector switch: foot / hand operation - Switch cabinet components: mostly SIEMENS ==== Safety - Emergency stop switch - Stroke limitation - Stable steel construction - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 3 kW - Total connection power: max. 5 kW ##### Application areas: Assembly work, small-series production, pressing, straightening, toolmaking, fixture construction, metalworking, maintenance, workshop operations, service applications (Hydraulic press, C-frame press, single-column press, assembly press, small-series production press, workshop press, 20-ton press, pressing press, straightening press, industrial press, C-frame press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directives and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they meet all aspects of the national Brazilian safety regulation NR 12, which is based on these. Our strength lies in the design and construction of special machines and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. The hydraulics of the presses predominantly use components from leading European manufacturers.

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf Kedpfx Aey T H Axearelt

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm Kljdpfx Aasy T Hnujrjt