Used Cross-Flow Membrane Filtration System for sale (43,310)

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. Iodjvhctwepfx Ahzeaw The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: good (used), Year of construction: 2014, machine/vehicle number: 412, space requirement width: 1,500 mm, space requirement length: 3,300 mm, space requirement height: 2,500 mm, Ultrafiltration system with accessories for the treatment of soil washing wastewater Iajdpfoqzx Dbex Ahzjw Year of construction 2014, fully functional until dismantling Documentation, operating instructions, E-plans are available. 7 packages; Filtration tank single 1520mm diameter Filtration system with control 330cm x 150cm x 220cm 5 extra Euro pallets with accessories

Year of construction: 2007, condition: ready for operation (used), Filtration surface: 224m², documentation available. Iaedsgi Nw Sjpfx Ahzjw

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 16,000 m³/h, power: 15 kW (20.39 HP), Mobile filtration unit 15 kW with 16,000 m³/h extraction capacity for aggressive dusts with pre-chamber separator. Assembly in approx. 10 minutes. Cartridge cleaning by compressed air pulse jet. 16 filter cartridges, 15.6 m², Bio Class M. Dust collection via big bag. The filter consists of 2 separate parts that are assembled using a forklift. Connection is made using 6 quick-release locks and 2 connector plugs. A duct or extraction hose can be connected at the rear of the filter. Ijdpfxsw Ivpvs Ahzoaw

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 16,000 m³/h, power: 15 kW (20.39 HP), Mobile filtration unit 15 kW with 16,000 m³/h extraction capacity for aggressive dusts with pre-chamber separator. Assembly in approx. 10 minutes. Cartridge cleaning by compressed air pulse jet. 16 filter cartridges, 15.6 m², Bio Class M. Dust collection via big bag. The filter consists of 2 separate parts that are assembled using a forklift. Connection is made using 6 quick-release locks and 2 connector plugs. A duct or extraction hose can be connected at the rear of the filter. Iaodew Ivp Nopfx Ahzew

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 16,000 m³/h, power: 15 kW (20.39 HP), Mobile filtration unit 15 kW with 16,000 m³/h extraction capacity for aggressive dusts with pre-chamber separator. Assembly in approx. 10 minutes. Cartridge cleaning by compressed air pulse jet. 16 filter cartridges, 15.6 m², Bio Class M. Dust collection via big bag. The filter consists of 2 separate parts that are assembled using a forklift. Connection is made using 6 quick-release locks and 2 connector plugs. A duct or extraction hose can be connected at the rear of the filter. Iedpfx Ajwxlygehzjaw

Condition: new, Year of construction: 2018, Behncke SFA 600B AFM with TLS - with filter material - slight storage marks - shipping possible at extra cost Iedpfx Ahew U Su Ijzsaw

Year of construction: 1982, condition: good (used), Travelling crosscut saw, Esterer KSG-F, manufactured in 1982 including saw blades including control system including length measurement Ijdpfx Ajip T Dlohzsaw including frame including hydraulics available immediately Location: Austria, near Vienna

Condition: used, Year of construction: 2007, No. 3177 Optimizing cross-cut system Grecon Dimter OptiCut 200-1 Used, year of construction 2007 For cross-cutting fixed lengths Wood dimensions to be processed: Input lengths min./max. 3000 - 5000 mm Input widths min./max. 80 - 200 mm Input thicknesses min./max. 38 - 80 mm Timber cross-sections max. 200 x 50 Final timber length min./max. 700 - 1000 mm Average number of cuts / board 5 Wood types: Softwood or hardwood Performance of the system: Feed speed max. 180 m/min, infinitely variable Time per cross-cutting process incl. brakes 0.7 - 1.2 s Ijdsu Atmuopfx Ahzsaw Position overview: Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m coupled with feed motor of the saw Item 2: OptiCut 200-1 automatic cross-cut saw in left-hand design With built-in length measuring wheel and built-in blow-out device for waste Graphics-capable input terminal, 1 / 4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is fed from the left Pos. 3: Outfeed conveyor belt / sorting station with drive unit, without ejector Belt length approx. 1.5 m Machine already dismantled and stored The infeed table was not used by the previous owner. 2 feed rollers were installed for the material feed. The conveyor table is there, only the rubber belt is missing. Sale on behalf of customer, ex location Austria, without transportation and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: like new (used), Year of manufacture: 2011 Complete set of new filters included Iedpfxjxgnv Rs Ahzsaw Model: DMC-MMB Quantity: 7 units

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? Iaedpfx Aeq Nw Uqohzow An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Condition: excellent (used), REF: MM5767 1 x Adpak Machinery Systems Ltd stainless steel flow wrapper fitted with an ICE Zodiac Hawk thermal transfer printer and a fixed folding box. Manufacturer - Adpak Machinery Systems Ltd Model - GSP 65. Date of manufacture - 2009 approx, refurbished by Midas Motion in 2020. Iasdpfx Aeulc Sqjhzsw Sealing jaws - 300mm long. Fixed folding box - 40mm wide. Came out of production in 2023, this unit was previously used to individually wrap ice lollies.

Condition: used, Item: A-2600-UF-Microfiltration-Block UF- /Microfiltration Block (Alcalase) Iodpokyu Avofx Ahzeaw 4 X 38-42 m2 DOW Separation Systems inclusive pumps, tubes and other accessories. To offer 6 pieces identical

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AFMAAAABABAA+, The Coriolis Mass Flowmeter Proline Promass 83F, manufactured by Promass in 2011, is a precision instrument designed for accurate mass flow measurements in various industrial processes. This model, designated as 83F1H-3967/0 with serial number E710E302000, has a nominal size of DN100 (4 inches) and is equipped with a hygienic process connection DN100 DIN 11851, making it suitable for applications requiring sanitary standards, such as dairy processing. Constructed from high-grade stainless steels 1.4404/316L and 1.4539/904L, the device offers durability and corrosion resistance. It is rated for a nominal pressure (pnom) of 25 bar and operates in a process temperature range from -50°C to +200°C, with an ambient temperature tolerance from -20°C to +60°C. The flowmeter's housing features IP67 and NEMA/Type 4X protection ratings, ensuring resistance to dust and immersion in water. Sensor calibration includes a K factor of 1.6287 / 51 and a density accuracy of 0.0005 g/cc. The surface finish meets hygienic standards, featuring a roughness of 0.8 µm (150 grit). The unit is powered by a voltage range of 20-55 VAC or 16-62 VDC, consuming 15 VA/W at a frequency of 50-60 Hz. The housing shows some surface wear and minor dents, and the label exhibits slight wear but remains mostly legible. It is mounted on a wooden pallet and is equipped with attached braided cables with yellow markings and black cable ties. Some dust accumulation is visible on the flowmeter body, indicative of prior use. Iajdpfxoy Anhze Ahzow This Promass 83F flowmeter is suitable for precision mass flow measurement in the pharmaceutical, chemical, and food industries, particularly where hygienic conditions are required.

Condition: used, Year of manufacture: 2001 Iasdpjhc T Irofx Ahzsw In very good condition Additional images available

Condition: excellent (used), Professional 3M Speedglas welding set with Adflo powered air-purifying respirator (PAPR) system. Used equipment, fully functional, in good technical condition. Ideal for professional MIG/MAG, TIG, and shielded metal arc welding (SMAW) applications. ⚠️ Price is for 1 set (1 SET). The set includes: 3M Speedglas auto-darkening welding helmet, 3M Adflo PAPR system, waist belt, air hose, charger, Speedglas carrying bag, battery. Condition: used equipment, normal signs of use, visible in the photos, visor darkens properly, PAPR system starts and operates, Iaedoy Ucnaspfx Ahzow complete set as shown in the photos. Applications: MIG/MAG welding, TIG welding, SMAW welding, industry, workshop, manufacturing, metalworking. Why it’s a good choice: reputable 3M Speedglas brand, very high level of comfort, respiratory protection thanks to the Adflo system, convenient carrying bag, professional, premium-class equipment. Shipping by courier or personal pickup is possible.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture 04/2008 400 mm working width Finger conveyor Lifting and lowering station Iedpfx Asv Ta Hljhzsaw Spray fluxer Dynamic preheating at the bottom Convection heating

Condition: used, This listing is for the Quattroflow QS15SU Fluid systems pump The unit is in full working condition and is ready for immediate use The Quattroflow 15SU is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, food or cosmetic research centres or plants. Examples: Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) Solutions of polymers or suspensions (silicon, latex, chromatography media) Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) colloidal solutions Suspensions of viruses or phage Iajdpfsxl Er Hex Ahzsw Dairy products Gelatine Supplements and ingredients for cosmetic and food

Condition: used, This listing is for the Formonia Formaflow VVAP1/at Vaporiser System Isdpfx Ahjxhgdcozoaw The unit is in full working condition and is ready for immediate use Foramaflow VAP1a/T Formalin Vaporizer Overview: Purpose: Safe and easy formalin fumigation for ducted safety cabinets. Design: Can be mounted externally or placed inside the cabinet before sealing. Capacity: 120ml solution capacity. Automation: On-delay timer for delayed start. Automatic cut-off switches off heating once the solution has evaporated. Power Supply: 230V. Construction: Lightweight (2.5kg). Stainless steel body with powder-coated, chemical-resistant matte black finish. 55mm discharge tube angled upward by 1°. Safety: Designed for fully automated and safe overnight fumigation

Year of construction: 2000, condition: refurbished (used), functionality: fully functional, machine/vehicle number: D135/150/370/2HD, Dragon shredder is made in UK and very heavy built shredder for wood, plastic and many other applications please get in touch and come and see it. its ideal for heavy industry. Iajdpfxjzl D U Ts Ahzew

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 4428 - Drive system: CNC - Control system brand: Siemens - Power [kW]: 37.0 - Operating pressure [bar]: 4137 - X-axis travel [mm]: 6500 - Y-axis travel [mm]: 3300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Iaodpfx Ahewnidhozsw Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), axle configuration: 3 axles, first registration: 03/2021, loading space length: 13,600 mm, loading space width: 2,460 mm, loading space height: 2,830 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,050 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 8070 kg, Gross vehicle weight: 43000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body construction year: 2021, Axle type: SAF, MEGA DOUBLE DECK // HARD WOOD FLOOR // SAF DISC BRAKES / LIFTING AXLE = Further Information = General Information Cab: Day cab Iajdpfxsy Irnve Ahzew License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lifting axle; Tire tread depth left: 6 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 11 mm Axle 3: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Tare weight: 8,070 kg Payload: 34,930 kg GVW: 43,000 kg Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Financial Information Leasing price: 335 € per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of construction and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 09/2017, loading space length: 135,000 mm, loading space width: 24,800 mm, loading space height: 27,000 mm, total length: 13,820 mm, total width: 2,550 mm, total height: 4,000 mm, wheelbase: 8,910 mm, color: white, Year of construction: 2017, Equipment: tail-lift, = Additional options and accessories = - Air suspension = Further information = Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg; Steerable Unladen weight: 8,420 kg Payload: 21,580 kg GVW: 30,000 kg Tail lift: D'HOLLANDIA DHLM.30, rear door, 2,000 kg Technical condition: good Visual condition: good Iasdpfx Ajy Ipw Ishzow Registration number: OP-65-YR

Condition: used, Year of construction: 2005, total width: 6,000 mm, total height: 2,200 mm, total length: 23,000 mm, working width: 2,200 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,200 mm, roller length: 7,000 mm, We offer this ready-to-use ICO SYSTEM ICO SYSTEM Reactive PUR Hot Melt Press PU full-surface bonding system, built in 2005. ICO SYSTEM reactive PU hot melt press line – 2,200 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,200 × 7,000 mm Suitable for single-sided bonding Year of construction: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed ovens for controlled curing and consistent press pressure Conveyor belts and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood; MDF; HDF; particleboard; HPL; composite panels; aluminum and steel sheets; various other industrial sheet materials. Production process: The line is designed for an efficient and reproducible production process: positioning of the base sheet; application of reactive PUR hot melt; automatic placement of the top sheet with vacuum portal; passage through the heated press; controlled curing and output of the final product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of delivery: The complete installation includes, among other things: ICO SYSTEM heated throughfeed ovens; automatic vacuum portal with suction cups; conveyor belts and roller conveyors; control cabinet with PLC/HMI; complete steel structure and handling system. Condition: Iaodezlh Auepfx Ahzow The machine is fully operational, is still in use for production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to bond large sheet materials efficiently and with a high-quality PUR hot melt bond.

Condition: ready for operation (used), functionality: fully functional, A good used barcode verification system featuring twin belt drive with speed control - system was used for automatic labelling of the underside of boxes/cartons on a production line (label applicator was removed and sold) - barcode scanner is integrated to detect the presence of the label (which contained a barcode) and if no label detected the system alarms and stops - barcode scanning can be disabled if not required - setup currently for EAN 13 Barcodes and has Teach facility built in for new barcode or changeover Conveyor could also be used for Ink Jet Printing of underside of packs Could be refitted with your own label applicator also - mounting boss still in place for original Pago Applicator Single phase 240Volt AC supply Iaodpfowufb Aex Ahzew Ready to ship worldwide