Used Cyclone Separator for sale (7,366)

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. Pgodpfx Ajy N Rlvei Teu The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components.

Condition: like new (used), Year of construction: 2014, Pilot Crystallizer Mini pilot plant for margarine, shortening, puff pastry, and other products that require mixing and cooling. A complete mini laboratory plant for research and development. Including: 2 tanks, 5 liters each, for water and fat-phase ingredients. 1 buffer tank, 20 liters. High-pressure pump, up to 75 bar. 3 crystallization cylinders, named A1 + A2 + A3. 2 pin mixers, named C75 + C150. 1 rework melter, C heat. 1 resting tube, named B200. The above-mentioned units can be positioned in any possible way, for example, A1-A2-B or A1-C75-A2-A3-C150, by switching pre-assembled high-pressure piping. The crystallizer cylinders, which are scraped surface heat exchangers (SSHE), are cooled by direct evaporation using an integrated Freon cooling compressor. The tubes have a diameter of 30 mm and a length of 80 mm; the rotor is equipped with 2 scrapers, providing a surface area of 0.113 m² per tube. A temperature sensor is located after each unit. The capacity is variably adjustable, up to 50 liters per hour. Pgodpfxez Iy Hzj Ai Tsu Cooling system manufactured by GEA, with an integrated compressor and water-cooled condenser. There are 3 independent cooling circuits (for each crystallizer). The tanks are double-jacketed, with an agitator and temperature sensors. The entire unit is built on a frame and is mobile. The controls are integrated and tested using an HMI touch screen control panel with ‘SpecView Inc.’ software, and the controllers are from RKC systems. The unit can be controlled from the HMI by simply starting and stopping the individual components, but a recipe can also be created for controlling the motor speed, temperatures, and valves. All motors are equipped with frequency converters, Siemens micromasters and 1 x Danfoss. An integrated CIP system, with CIP circulation and a CIP concentrate hose dosing pump.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, TECHNICAL DETAILS Pgsdozzp I Rjpfx Ai Tju Process and Feeding Low rotational speed Single-screw feeding system Gentle processing of raw materials Preservation of fiber and texture in the end product Application Area Suitable for red meat, poultry, pork, fish, fruits, and vegetables Machine Design Compact design with a small footprint Control elements mounted directly on the machine Versatile for use with different raw materials Product Quality Gentle separation for a high-quality, minced end product Preservation of fibers and texture EQUIPMENT Control unit arranged directly on the machine Single-screw feeding system Compact machine construction

Condition: used, Year of construction: 1978, el. cabinet. Documents are available. Capacity: app. 15-20.000 ltr/h Pedpfsz R Dkqsx Ai Tegu Suitable for wine, beer

Condition: refurbished (used), Year of construction: 2000, operating hours: 3,200 h, functionality: fully functional, fuel: diesel, Machine in excellent condition with low working hours, optional mobile bunkerconveyor (the one on the picture) available for extra. Pgodpfx Asvy A Urji Tou New conveyor belt cleaner.

Condition: used, Year of construction: 1976, Drum speed: 4500/min, drum diameter: 650mm, permissible density of centrifuged material, heavy liquid: 1,1kg/dm³, solids: 1,3kg/dm³, control panel: Siemens SIMATIC HMI. Maintenance was carried out every two years by a specialist company, new control system installed two years ago, very good condition, no maintenance backlog, with documentation. An on-site inspection is possible. Pgjdpfx Aezun S Iji Teu

Condition: excellent (used), Year of construction: 2019, operating hours: 4,733 h, functionality: fully functional, fuel: diesel, Three fraction air separator + additional suction fan for midfraction. One owner machine. Pjdev Aailjpfx Ai Tjgu

Condition: used, Year of construction: 2012, GEA Milk Separator MSE 100-06-177 Year of manufacture: 2012 Maximum permissible drum speed: 7200 rpm Maximum permissible feed density: 1.0 kg/dm³ Heavy liquid: 1.0 kg/dm³ Solids: 1.1 kg/dm³ Min./max. feed temperature: 5/100 °C Pgedpfxowayr Ts Ai Teu Max. throughput: 30 m³/h

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Electromagnetic belt separator IFE MEL 1400 length: 3200mm width: 1200mm Year of manufacture: 2007 Protection class of magnetic housing IP65; Magnet power 7.55 kW; Material flow rate 1.8 m/s; Drive power 4 kW; Control voltage 230 V; Pgjdpfxepcf Etj Ai Teu Operating voltage 3x400 V; Frequency 50 Hz; cylinder diameter: 500mm Total weight: 6480 kg Adjusting the device belt and tension

Condition: like new (used), Aweta separator for peppers/tomatoes with 4 lines This separator/singulator is used in combination with an Aweta KG 4-lane weightgrader. Separator is without motor / steering With 4 cameras (colour) More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery Pgodpfoz Rbi Rsx Ai Tou

Condition: excellent (used), functionality: fully functional, Westfalia Separator AG CIP System Westfalia Separator AG CIP System | Tank, Pump, Heat Exchanger System type: CIP (Cleaning In Place) Manufacturer: Westfalia Separatoren AG / GEA Group A complete CIP (Cleaning In Place) installation from the renowned manufacturer Westfalia Separator AG, designed for automatic cleaning and disinfection of process lines in the food and dairy industries. The system is equipped with stainless steel tanks with heating jackets, recirculation pumps, a GEA Ecoflex plate heat exchanger, and a control cabinet. Main components of the system: 1. Stainless steel CIP tanks Brand: Westfalia Separator AG Type: CIP-TANK 3000 L (2 pcs) Serial numbers: 96/00408-1 and 96/00408-2 Year of manufacture: 1996 Capacity: (2×) 3300 liters Operating pressure: 0 bar Operating temperature: 80 °C Dimensions: (2×) 3000 × 1900 × 2300 mm 2. Stainless steel platform with stairs Dimensions: 2950 × 2200 × 2400 mm 3. Stairs Dimensions: 600 × 600 × 500 mm 4. Centrifugal pump Brand: Hilge Type: EURO-HYGIA-B-SUPER-II/60 B Number: 23/96/11349 Capacity: 30 m³/h Power: 11.0 kW Dimensions: 750 × 350 × 450 mm 5. Flow meter Brand: Endress + Hauser Model: Promag 53 Dimensions: 350 × 200 × 200 mm Accurate flow measurement for CIP media. 6. Anema centrifugal pump Dimensions: 530 × 300 × 300 mm 7. Plate heat exchanger Brand: GEA Ecoflex GmbH Type: VT20 CDS Serial number: 170/13832 Dimensions: 900 × 550 × 1500 mm High efficiency heat transfer for CIP solution preparation. 8. Control cabinet Dimensions: 670 × 220 × 800 mm Responsible for controlling and monitoring CIP system operation. 9. Stainless steel buffer tank (CIP tank) Pedpfxoxtvb Uo Ai Togu Tank dimensions: Ø 800 × 800 mm Overall dimensions: 1150 × 900 × 1770 mm 10. Anema centrifugal pump, number: 32078 Operating pressure: 12 bar Dimensions: 650 × 400 × 450 mm The Westfalia Separator AG CIP system is a comprehensive solution for cleaning process installations, providing: - high process hygiene, - monitoring of cleaning parameters (temperature, flow, time), - integration capability with dairy, food, or beverage production lines. The use of components from GEA, Hilge, Endress + Hauser, and Anema ensures reliability and long service life of the system.

Condition: new, Separation tool set 17, opening A 25-155mm, clamping range 400mm, KUKKO · Complete with puller · Quick-action clamping spindle · Special steel Pjdj Ab Iyvepfx Ai Tsgu · User-friendly design, as the separating jaws can be quickly and centrally clamped by a clamping spindle. Application: for removing ball bearings, roller bearings, inner rings and other flush-fitting parts, especially for automotive, agricultural and industrial mechanics. · Other technical features: Weight: 19 kg Opening A: 25 - 155 mm Opening B: 155 mm Nominal size: 3

Condition: used, The machine is in good working order and ready for use. It was previously used in a company that specializes in vegetable washing. The machine was used to pre-treat wastewater. Pjdpfx Ajzc Ef Aji Tsgu Please check out my other listings.

Condition: reconditioned (used), Fully refurbished and tested. Very good condition. Complete with tools for bowl cyclone foundation plate vibration damping feet Pgodpfx Aisuccrks Teu owm - operating water module controlcabinette (not tested or reconditioned)

Condition: good (used), Van Dijke skin (bulbs) separator. This machine can be used for flower bulbs and several type of vegetables, like potatoes. Galvanized frameWidth of conveyor 120 cm. Designed to remove floating pieces of a product, like the sheets of the skin of flower bulbs or leafs. The machine works on the principle that the produce is heavier than the pieces that are to be taken out, and are therefore separated from each other. The separation is made by a floating waste outlet. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines Pgsdpfxoz Rgc Aj Ai Tju The specialist in used agriculture and horticulture machinery

Condition: used, Year of construction: 2013, Year of manufacture: 2013 240 V, IP 65 Operating pressure: 6-8 bar Pgedezrglzepfx Ai Tou

Year of construction: 2025, condition: like new (used), Medium screening 0-20/25 mm The installed screening shaft with a disc spacing of 15 mm is the most popular and frequently purchased screening line. Suitable for screening topsoil/humus, with smaller stones of -20/25 mm included in the fraction. The stones maintain soil permeability and stability, reducing moss formation. Mixing in compost, sand, or substrate turns dirt into new revenue. Disc spacing 15 mm – in a single operation with screening – works excellently with a Terra-Star. Podpfx Aieyfwbzo Tjgu Screen fraction: 0-20/25 mm Wheel loader mounting is installed but not included in the price. On request, we supply the separator with adapters for excavators and wheel loaders. For excavators from 4t For wheel loaders from 3t No leakage oil connection necessary Series: TSE.083.210

Condition: used, Westfalia Pgsdpfxsz R Dpms Ai Tou Revolution / minute: 10000

Year of construction: 2024, condition: like new (used), The separator is designed for screening topsoil / humus. With the Terra-Star, screening and blending of compost, sand, or other materials can be accomplished in a single operation. Pedpeya Uuzsfx Ai Tjgu The four shafts provide impressive throughput in screening and mixing. The shafts are equipped with star discs made from wear-resistant HX 500. In case of wear, re-welding can be performed at any time. The Terra-Star is a modern system designed to give you a foundation for future adaptation, today. Changing to other carrier machines is always possible, as all connections are bolted. Converting the shafts for different applications is also feasible at any time—from screening shafts to mixing shafts or other combinations. Required adapters for excavators or wheel loaders are available from us upon request. For excavators from 2.2 t For wheel loaders from 1.8 t Weight in kg: 250 Throughput: 6-8 m³/h No leakage oil connection required Series: TSE.054.087

Condition: new, Separator set 17, opening A 22-115mm, span T.350mm, KUKKO · Complete with puller · Quick-release pressure spindle · Special steel · User-friendly design, as the separator jaws can be quickly and centrally clamped using a pressure spindle Application: for removing ball bearings, roller bearings, inner rings and other parts that fit flush, especially for automotive, agricultural and industrial mechanics · Other technical features: Weight: 10.4 kg Opening B: 115 mm Podpfxj Ab Iype Ai Togu Opening A: 22 - 115 mm Nominal size: 2

Condition: new, Separating tool set 15, nominal size 3, steel case, KUKKO · Complete set · Includes separating tool, puller, and extension Application: for removing ball bearings, roller bearings, inner rings, and other parts that fit flush · Other technical features: Contents: 1 separating tool, size 3, 1 puller, size 3, 2 extensions, size 3 · Packaging: steel case Nominal size: 3 Contents: 1 separating tool, size 3, 1 puller, size 3, 2 extensions, size 3 Pgsdpfe Ab I A Rex Ai Tsu

Condition: like new (used), Year of construction: 2024, operating hours: 7 h, functionality: fully functional, total height: 1,620 mm, total length: 1,760 mm, total width: 700 mm, type of input current: three-phase, tank capacity: 285 l, input voltage: 400 V, rotational speed (max.): 2,850 rpm, input frequency: 50 Hz, water tank capacity: 440 l, Water treatment and recycling unit for process water Z 800K HA TURBO FLOC – 2024 | Almost like new For sale, a professional water treatment and recycling unit for process water, model Z 800K HA TURBO FLOC. The system was manufactured in 2024 and has only been in operation for 7 hours, making it practically new. The unit is designed for effective treatment of process water and its subsequent reuse. Thanks to the use of a centrifuge and the Turbo-Floc flocculation system, it significantly reduces water consumption and operating costs for the plant. Technical specifications: treatment capacity up to 1200 l/h, system dimensions: 1760 × 700 × 1620 mm, centrifuge dimensions: 995 × 680 × 580 mm, drum rotation speed: 2850 rpm, RAL 7035 paint finish, automatic water removal from the centrifuge during braking, polyurethane sludge basket, electromagnetic safety valve. Buffer tank (285 l): made of HDPE plastic, equipped with a Turbo-Floc system for automatic dosing of coagulant or flocculant, additional filter on the inlet of process water, two float switches controlling the liquid level, pulsed power supply by P-3 pump. Pedpezcybrofx Ai Tjgu Clean water tank (440 l): made of HDPE polyethylene, supplies the devices with treated process water, equipped with an efficient P9 diaphragm pump: capacity 7.8 m³/h, working pressure 4 bar, water level control. Control and monitoring system: monitoring of filling and sludge basket replacement, timer relay and light signaling (flashing lamp), PLC controller E60-420, supply voltage 400 V / 50 Hz, control voltage 24 V DC, protection class IP54, operating temperature from +5°C to +40°C, safety feature that prevents the centrifuge from starting unless the cover is opened and closed beforehand. Additional equipment: DP1 dosing pump for coagulant supply, dosing capacity 0–1 l/h, Turbo-Floc flocculation mixer with mixing blades on both sides of the diagonal, special conical guide plates made of stainless steel, mounted inside the centrifuge. The unit is in excellent technical and visual condition. It is an ideal solution for industrial plants using vibration treatment, where effective water treatment and reuse are required. Year of manufacture: 2024 Operating hours: 7 We invite you to contact us for more information and to arrange a demonstration of the unit.

Condition: used, Year of construction: 2019, Automatic separator for removing bacteria from milk and whey (bactofuge). These operations are necessary to eliminate bacterial contaminants that may pose a health risk and shorten the shelf life of the product. Brand: POLAT (Makina San) Model: PMS BX5 Centrifuge speed: 6,200 rpm Year of production: 2019 Power supply: 400 V Pedjyc E E Aopfx Ai Togu Installed power: 22 kW Weight: 1,220 kg Condition: used Electrical documentation available.

Condition: used, Chemagen chemagic Magnetic Separation Module I The chemagic Magnetic Separation Module I (chemagic MSM I) automates the isolation of nucleic acids within one hour. Viral RNA from 96 nasal swab samples can be isolated simultaneously. The Chemagen MSM-1 is an automated system for high-throughput isolation of nucleic acids (DNA/RNA). It utilizes a patented magnetic bead technology, in which magnetizable metal rods are immersed in the process solutions to efficiently collect and re-suspend the bound particles. Technical Features & Capacity Throughput: The system has a modular design and can process 12, 24, or 96 samples simultaneously, depending on the rod head used. Sample Volume: It offers high flexibility for volumes from 10 µl to 10 ml. Processing Time: 96 samples (small volumes): approx. 15–60 min. 24 samples (medium volumes): approx. 35–60 min. 12 samples (large volumes): approx. 45–60 min. Technology: The particles are re-suspended by rotating the metal rods at up to 2,000 rpm, which enables high yield and purity without cross-contamination. System Components & Extensions Automation: The MSM-1 can be integrated into standard liquid handling units and often features a 6-axis industrial robot for fully automated sample tracking. Software: The system is controlled via the chemagic QA software, which is LIMS-compatible. Applications The device is primarily used in research and diagnostics, including: Biobanking and human genetics HLA typing Detection of viruses and bacteria Extraction from various materials such as whole blood, saliva, serum, or plasma System Components Actuators: High-precision linear axes for vertical movement and a rotary axis for mixing Electromagnet: Central unit for controlling the magnetic attraction to the metal rods Interfaces: Integrated PC with screen, keyboard, and barcode scanner for sample tracking Pedsyk Uu Nopfx Ai Tsgu Software: chemagic QA software (LIMS-compatible, logging, user management) Special Features Cross-Contamination Protection: The use of disposable protective sleeves (tip combs) for the metal rods prevents contact between samples. Automation: Can be combined with the chemagic Dispenser for automated buffer filling or integrated into liquid handling robots (e.g., Hamilton, Tecan). Rod Heads: 96 Sampling Volume: 10 - 400 μL Number of Samples: 1 to 96 samples TFT monitor, keyboard, and mouse Year of manufacture: 2007 Dimensions & Structure Base machine (W/D/H): approx. 600 x 640 x 950 mm. Carrier axis (W/D/H): 1940 x 170 x 200 mm (in the fully expanded configuration with rail system). Total space requirement: A fully configured system can occupy up to 2000 x 740 x 800 mm (L/W/H). You can find more new and used items in our shop! International shipping costs on request!

Year of construction: 2020, condition: excellent (used), functionality: fully functional, EIMA FOOD PROCESSING MACHINES | Separator / Rotary drum screener Manufacturer: EIMA Engineering Serial number: 2050039 Year of manufacture: 2020 Drum diameter: 1000 mm Drum length: 2400 mm Dimensions: 3200 x 1600 x 2850 mm Professional, large-capacity rotary drum separator (rotating screen) from the German leader in process engineering, EIMA Engineering. This unit is a key component in processing lines within the fruit and vegetable processing sector. The machine is designed for continuous, mechanical separation of solid fractions from liquids, sorting raw materials by size, cleaning process water from post-production residues, or thoroughly draining products after washing and blanching. The heart of the unit is a robust, perforated drum made of the highest quality stainless steel and acid-resistant steel, with an impressive diameter of 1000 mm and a working length of up to 2400 mm. This working geometry ensures extremely high surface and hourly throughput, preventing blockages even with rapid input of raw materials. Operation in a rotary system guarantees that the material being processed is constantly and gently mixed, optimizing the draining and separation process without the risk of mechanical damage to delicate food products. Pgedpfxozczt Ao Ai Tju