Used Dilo Needle Loom for sale (293)

Year of construction: 1995, condition: ready for operation (used), High speed model with SPLIT ROLL high low pile patterning device, working width: 5180mm, needle gauge: 1/8 inch, 1632 (2x 816). Equipment: adjustable needle stroke eccentric and needle stroke adjustment lever with counterweights, prepared in side drive frames, easily accessible at working height, pile height adjustment range 5-16mm, table height adjustment (machine bed) with hydraulically controlled table lock via ENCORE PC memory programmable controller, looper stroke and knife stroke eccentrics with counterweights, 2 needle bars with individual needles, 2 looper bars with Cut Loop individual loopers, 2 knife bars with Tuftco knife blocks, 8 knives per block, individually replaceable, reed plates for front and rear needle bar, ENCORE PC memory programmable controller for controlled stitch density and controlled backing tension, main shaft designed as a hollow shaft with integrated pump controlled pressurized oil circulation lubrication or spray lubrication to each needle drive connecting rod bearing and main shaft bearing in the side drive frames, 2 PC memory programmable HYDRASHIFT DRIVES for smooth needle bar shift, 12 shift steps each to the right/left per needle bar, high speed version with linear slide bearings in the needle bar suspension, pneumatic disc brakes on the main shaft, main shaft rotation via ratchet indexing gear, variable main drive (2x15HP) with frequency inverter, Siemens memory programmable controller with fully wired control cabinet, mounted externally on the control cabinet door. An on-site inspection is possible. Ledpfjzcfhdjx Ammsac

Condition: used, mileage: 231,500 km, power: 163 kW (221.62 HP), first registration: 02/2007, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2026, color: white, gearing type: mechanical, emission class: euro4, total width: 2,550 mm, total height: 3,750 mm, loading space length: 7,550 mm, loading space width: 2,490 mm, loading space height: 2,580 mm, Equipment: soot filter, tail-lift, DAF LF45.22012t Furniture Van with tail lift ----Commercial vehicles Göppl GmbH DAF Authorized Dealer----Registration: 21.07.2007 Inspection (HU): 06/2026 Safety testing (SP): 10/2025 UVV: New upon handover Unladen weight: 5800kg Payload: 6,190kg Signs of use, rust and wear and tear visible and recognizable on the vehicle. See attached images Equipment: * Local transport cab DayCab * Mechanical cab suspension * Electrically adjustable mirrors * Halogen headlights * Tinted windows * Roof hatch with manual operation * Air-sprung driver's seat * Double passenger seat bench * Radio/cassette player with two speakers * Cruise control * Digital tachograph * Engine: 6-cylinder, 165kW/224 HP, EURO4c (emission code: 0681) * Manual 6-speed transmission * Rear axle ratio: 3.73 * Exhaust brake * Wheelbase: 5.40m * Tires: 245/70R17.5 Lajdpfx Aop Spixemmoc * Spare wheel holder with spare wheel * Suspension: Front: 4.50t parabolic * Rear: 8.50t parabolic * Generator 80A, batteries 2x 175Ah * Fuel tank: 123 liters * AdBlue tank: 26 liters * Trailer hitch * Electrical connection 24V 2x 7-pin * Pneumatic connection for trailer * Permissible total towing weight: 21,000kg Body: * Manufacturer: Saxas * Type: MKD 76 - M * Furniture van with needle felt * Three lashing rails * Dautel DLB 1000 tail lift, 1000kg * Dimensions: * Length: approx. 7,550mm * Width: approx. 2,490mm * Height: approx. 2,580mm - pass-through height approx. 2,520mm Option: * OBU installation * Tachograph check * New seat covers * New floor mats * New service (X+Y) ----Commercial vehicles Göppl GmbH Weiden - Regensburg - Leupoldsgrün - Bamberg - Nuremberg DAF Authorized Dealer - DAF Service Partner - FIAT-Professional Service Partner Errors and prior sale reserved Sale only to businesses.

Condition: used, mileage: 280,000 km, power: 102 kW (138.68 HP), first registration: 10/2006, overall weight: 7,490 kg, next inspection (TÜV): 03/2025, color: blue, gearing type: mechanical, emission class: euro4, number of seats: 2, loading space length: 6,050 mm, loading space width: 2,490 mm, loading space height: 2,580 mm, Year of construction: 2006, Equipment: parking heater, tail-lift, DAF LF45.140 Furniture Box with Tail Lift ----Nutzfahrzeuge Göppl GmbH - Authorized DAF Dealer -----First Owner Registration: October 18, 2006 - Production: 2006 Curb weight: 5,280 kg Payload: 2,210 kg Vehicle drives and shifts without malfunctions Body is dry inside Rust is evident around the vehicle due to its age. Viewing and test drive available by appointment. Ledpowappzefx Ammsac Equipment: * Long-haul cab * Roof spoiler * Air horn system * Translucent sun visor * Folding sleeping bed * Storage compartments behind the seats * Driver's seat with armrest * Passenger seat with armrest * Radio/CD player * Webasto Air Top auxiliary heating * Tires: 215/75R17.5 * Spring/spring suspension * Spare tire holder with spare tire * SAXAS plywood furniture box with needle felt * Overall dimensions: * Length: approx. 6,050 mm * Width: approx. 2,490 mm * Height: approx. 2,580 mm * Loading height: approx. 2,520 mm * Three rows of tie-down rails on the inside of the box (500 mm/1,300 mm/1,800 mm) * Translucent roof * BÄR BC1000 S2 tail lift 1000 kg * Roll-off protection via double rail Optional: * New general inspection (MOT) * New UVV tail lift * DAF Service ----Nutzfahrzeuge Göppl GmbH Weiden - Regensburg - Leupoldsgrün - Bamberg - Nuremberg DAF Authorized Dealer - DAF Service Partner - FIAT Professional Service Partner Subject to errors and prior sale Sale to businesses only

Condition: new, mileage: 300 km, power: 167 kW (227.06 HP), fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, loading space length: 7,300 mm, loading space width: 2,460 mm, loading space height: 2,500 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, DAF LF 230 with box body and tail lift 12t ---- Nutzfahrzeuge Göppl GmbH - Authorized DAF Dealer ---- STOCK VEHICLE - AVAILABLE IMMEDIATELY! ---- Production: Chassis 2023 - Body: 2025 Warranty: Plus - Driveline - 3 years - 200,000 km Financing + Maintenance Contract: We are happy to arrange an attractive offer for you, subject to credit approval. Equipment: * Distribution cab * Rubber cab suspension * External sun visor, “green light-permeable” * Halogen headlights * Fog lamps * Green-tinted, heated windows * Adjustable roof spoiler in cab color * Pneumatic steering column lock * Driver’s seat: air-suspended luxury seat * Double passenger bench * Air conditioning * Radio/CD player DAB, 2 speakers * DAF Connect * Adaptive cruise control with FCW and AEBS * Lane departure warning system * PX 7 engine, 167 kW / 227 hp, Euro 6 * Automatic engine idle shutoff: 5 minutes * 8-speed manual gearbox * Rear axle ratio 3.73 * Mechanical differential lock * Suspension: - Front: 4.50t parabolic springs - Rear: 8.5t air suspension * Wheelbase: 5.00 m Lsdpfx Amewx Tynsmjac * Tyres: 245/70R17.5 KMAX Goodyear * Plastic fuel tank 155 liters * AdBlue tank: 30 liters * Pneumatic and electrical connections for trailer, turntable coupling * Trailer electrical connection + EBS 24V / 2x 7-pin * Body connector for tail lift * Generator 100A, batteries 2x 175Ah Body by GÖPPL Fahrzeugbau GmbH Furniture box body * Dimensions (internal): - Length: approx. 7,300 mm - Width: approx. 2,460 mm - Height: approx. 2,500 mm * Side door, rear right * 2-step ladder * GRP roof, translucent * Needle felt lining * Triple-row combination anchor rails, also in side door * Height from floor to center of rail: 600 / 1150 / 1800 mm * LED light strip left and right upper * 24 mm phenolic-coated floor * Skirting/scuff strips on side and front walls, bottom galvanized steel, 270 mm high * Underrun protection galvanized * Palfinger MBB C 1500 kg tail lift, with hand and foot controls * 2x stainless steel toolboxes * Load securing certificate Code XL ----Nutzfahrzeuge Göppl GmbH Weiden - Regensburg - Leupoldsgrün - Bamberg - Nuremberg Authorized DAF Dealer - DAF Service Partner - FIAT-Professional Service Partner Errors and interim sale reserved Sale to business customers only.

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Lajdpfxozc N U Ij Ammsc Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Ledpszc N T Rsfx Ammsac Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) The machine is designed for operation with an electric turntable. The machine has an inverter to control the servomotor in the rotary table and an interface for connecting the rotary table Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of construction: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Lajdozc N Tkspfx Ammec Year of construction: 2015 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Renz Punch 500 perforator The device is in very good condition. New model with regulation Lajdjzdaydopfx Ammsc Electric drive, foot pedal control. The set includes a 3:1 perforation tool, a 4x4mm hole + a cutout for the pendant. Manufacturer’s description: Perforation device with a working width of up to 500 mm The device is designed for continuous operation and high loads The work cycle is activated by a foot pedal Perforation of up to 40 sheets (4 mm) in one cycle Quick and easy replacement of perforating strips Possibility of using strips with/without a recess for the hanger Possibility of using QSA strips (quick format change by turning off selected needles without having to remove the strip) Possibility of using two-part strips – one tool allows perforation of both books without a recess for a hanger and calendars with a recess for a hanger (in this case, perforation without a recess for a hanger up to 465 mm) Device with 3-phase power supply Weight 120kg

Condition: good (used), We are offering 4 transport rollers for sale here. The scope of delivery includes: 04x swivel casters, used Manufacturer: Kama Roller material color: Red Frame material color: sendzimir galvanized Technical data: Overall height: approx. 155 mm Roller diameter: approx. 125 mm Roller width: approx. 34 mm Bearing: needle bearing Roller material: rubber Plate dimensions: approx. 105 x 80 mm (W x D) Hole diameter: approx. 9 x 17 mm (oval) Number of holes: 4 pcs Screw hole spacing: approx. 80 x 55 mm (center to center) Weight / piece: approx. 0.970 kg Lasdpfx Amohunwpemjc

Condition: good (used), Current stock level: approx. 965 units. The scope of delivery includes: Ledpfohmuyzex Ammoac 1 x swivel castor, used Manufacturer: Kama Castor material color: Red Frame material color: sendzimir galvanized Technical data: Overall height: approx. 155 mm Castor diameter: approx. 125 mm Castor width: approx. 34 mm Bearing: Needle bearing Castor material: Rubber Plate dimensions: approx. 105 x 80 mm (W x D) Hole diameter: approx. 9 x 17 mm (oval) Number of holes: 4 pcs Screw hole distance: approx. 80 x 55 mm (center to center) Weight per unit: approx. 0.970 kg General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Year of construction: 2009, condition: used, The machine is powered and can be inspected by appointment! Technical data / machine components: Year of manufacture: 12/2009 Manufacturer: PRESSTA-EISELE Voltage: 400 V Rated current: 19.2 A Operating pressure: 250 bar Dimensions: approx. 18-20 m long, approx. 3 m wide Weight, unpacked: 4.5 to 5 tons Horizontal loading magazine: 5-strand toothed belt conveyor, toothed belt width 32 mm, with teeth on the running side 17 compartments, 90 mm wide, for holding the profiles, with a pusher 40 x 10 mm (H x W) 2 sliding supports between the toothed belts as additional support Depth, max: 2,380 mm, length: 7,400 mm Loading weight, max: 1,000 kg Conveyor length: 1,850 mm Profile length, min: 1,000 mm Profile length, max: 7,300 mm Common drive via geared motor: 0.55 kW, 400 V, 50 Hz Conveyor speed: 4 m/min Material stop on the left Magazine "empty" sensor, manual cycling Tactile switch for the first loading 5 pneumatic cylinders for aligning the profiles in the longitudinal direction 6 lifting rollers for lifting the profile from the loading magazine and transferring it to the pusher Pusher, electronically positionable feed system: Reinforced design Feed length, max: 9,000 mm Mounted on the right side of the machine Profile feed from right to left Guide profile with linear guide rail Carriage: plate construction with ball bearing carriage Drive via linear motor, positioning via magnetic strip Pneumatic material gripper Lsdpfx Ajzbac Temmsac All 8 profiles can be automatically clamped without adjustment Repeat accuracy: +/- 0.15 mm Rapid traverse speed, max: 180 m/min Input of the profile tube length into the control system 1 light barrier for detecting the beginning of the profile before the first punching head Punching unit: Drive: hydraulic Punching force per cylinder: 3.0 t, designed for 55 punching cycles per minute Only a maximum of 2 tools can be in operation Vertical punching head with 2 cylinders Punching stroke: 15 mm including 2 punching tools for hole ø 6.5 mm, spacing 65 mm Punching cylinders can be selected individually, guide for the profile 2 horizontal punching heads Punching stroke: 15 mm including 1 punching tool each for hole ø 6.5 mm and 1 punching tool for oblong hole 7 x 12 mm, guide for the profile Cycling lubrication system with 4 nozzles for lubricating the punches 3 l oil tank, level monitoring Saw: Drive: 5.5 kW, 400 V, 50 Hz Saw blade: ø 500 mm Saw feed: pneumatic with hydraulic control, from below Pneumatic profile clamping device: vertical and horizontal Cycling lubrication system with one nozzle Flap after the saw for removing cut-off pieces and scrap, max. 200 mm length Parts fall downwards into the provided box Longer scrap pieces are disposed of with good parts Needle marking system: Character size: 2 – 7 mm Marking window: 80 x 20 mm, 15 characters including spaces Marking always approx. 190 mm after the saw cut Data transfer from an Excel file via interface Each profile can have a different designation

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 76900 € 1453.41 € 1015 mm 610 mm 1.000 x 400 mm 400 x 1.000 mm 1050 mm 5 - 25 m/min 0 - 2.250 mm/min mm 450 mm 480 mm 0 - 675 mm/min 0.001 - 0.04 mm 500 - 1.800 1/min 3.75 kW 1.5 kW 1.1 kW Lasdpfxjwiqyaj Ammec 1.1 kW 4280 mm 2080 mm 2100 mm 3500 kg 220 kg 440 kg 355 x 50 x 127 mm mm 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation * grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH * The exact configuration of the dresser must be clarified before ordering

Condition: good (used), Year of construction: 1939, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 1939-30, We are offering 2 industrial weaving looms manufactured around 1939 by “Brothers Alexandrov” (Bulgaria / Macedonia region). These machines are heavy-duty, three-phase, and are still operational or can be made serviceable. These are pre-war industrial textile machines suitable for production, restoration, or export. Lasdpfjzfh Uwjx Ammoc Located in Bulgaria (EU). We are only interested in serious buyers and textile machinery brokers. Inspection and videos are available.

Year of construction: 1991, condition: good (used), Bruckner stenter frame Year of manufacture: 1991 Working width: 2400 mm Infeed: from batching Weft straightener Coating: above roller or fabric above Knife coating Dryer: Short infeed, suitable for coating Needle chain 6 fields Gas-heated At the exit: squeezing padder Cylinder cooling Output: batching winding, non-stop system USED INDUSTRIAL COOLING SYSTEM FOR COOLING ROLLS Manufacturer: CIAT Model: LGN 150V R410A Year: 2010 Refrigerant: R410A Power supply: 3 × 400 V / 50 Hz Ledpfjzam Awex Ammeac Installed power: approx. 10 kW Cooling capacity: approx. 150 kW Suitable for: Cooling rolls Textile coating lines Calenders Laminating lines Plastic and rubber processing lines

Year of construction: 2000, condition: like new (used), functionality: fully functional, Laroche Airlay carding machine for short fiber layering. It produces layers for needling or thermal bonding for upholstery, underlays, insulation, and automotive applications. In practice, on your production line, the 2,400 mm working width covers bedding, felt, and geotextile formats without prior cutting. The integrated weighing table stabilizes the basis weight continuously, and the installed power of 51 kW maintains the production rate with dense fibers. Detailed product description: The Laroche textile machine for layering non-woven fibers. Designed for layering short and coarse fibers, this Laroche Airlay carding machine forms layers for needling or thermal bonding. It is suitable for upholstery, underlays, thermal and acoustic insulation felts, automotive carpets, and agricultural geotextiles. In reality, a well-maintained used machine provides real production flexibility across several markets without multiplying changeover operations. Production characteristics and weight control: The 2,400 mm working width covers standard bedding, insulation, and geotextile formats, with less trimming required at the output. What truly changes in production is the integrated weighing table: it allows for quick correction of basis weight variations and limits waste at startup and during steady-state operation. The installed power of 51 kW supports the line when the material load becomes irregular or denser. The speed of up to 10 m/min is adjusted according to the layer weight and the type of fibers, which allows for a balanced approach between hourly output and layer uniformity. Production versatility and textile recycling: The adjustable layer weight of 500 to 1,500 g/m² covers lightweight underlays, heavier insulation felts, and upholstery items. In practice, on your production line, this range avoids dedicating a machine to each product family and reduces internal transfers. The machine accepts both natural and recycled fibers. On a non-woven line, I prefer this type of carding machine when it is necessary to absorb variations in raw materials while maintaining a usable layer before consolidation. Lajdpfx Aey Urmlsmmec Textile and non-woven sectors covered by this carding machine: This carding machine meets the needs of upholstery and bedding, underlays for footwear and clothing, thermal and acoustic insulation felts, automotive carpets, and agricultural geotextiles. First and foremost, it is important to verify the compatibility between your fiber mix, your target basis weight, and the expected uniformity downstream. The 2,400 mm width and the adjustable layer weight make it a suitable piece of equipment for a workshop seeking versatility without complicating operations. What the technical data sheet does not say is that this type of configuration also simplifies medium-sized production runs when switching from one application to another with minimal downtime.

Condition: refurbished (used), Year of construction: 2025, Schaudt PF43 1000/1750 Grinding length: 1,000 / 1,750 mm Center height: 150 mm Workpiece weight: 200 kg (optionally more) Additional options available for selection: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control - Fast setup via GSN operator interface - Diatronic measuring system - B-axis with free positioning - Second external grinding wheel - Internal grinding unit - Center height adjustment - Dressing spindle for diamond form wheel - Balancing and finishing sensors - Hydraulic clamping/releasing of the tailstock - Automatic Siemens door drive Lajdofg Ta Uopfx Ammec - 19" / 22" screen - Remote maintenance - Conversion to needle nozzles - Matching coolant/extraction system - Automation preparation - and more We can also overhaul your existing grinding machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and more.

Condition: refurbished (used), Year of construction: 2025, Schaudt PF61 1000 - 4000 Grinding length: 1,000 / 2,000 / 3,000 / 4,000 mm Center height: 260 mm Additional options available for selection: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control - Quick setup via GSN operator interface - Diatronic measuring system - B-axis freely positionable - Second external grinding wheel - Internal grinding unit - Center height adjustment - Dressing spindle for diamond form roller Lajdpjiqxt Hsfx Ammec - Balancing and truing sensor - Hydraulic clamping/releasing of the tailstock - Automatic Siemens door drive - 19" / 22" screen - Remote maintenance - Conversion to needle nozzles - Matching coolant/extraction system - Automation preparation - and much more We can also overhaul your existing grinding machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and more.

Condition: as good as new (ex-display), Year of construction: 2025, Studer S40 1000/1600 Grinding length: 1,000/1,600 mm Center height: 175 mm (optionally more) Workpiece weight: 120 kg Additional freely selectable options: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control - Quick setup via GSN user interface - B-axis freely positionable - Second external grinding wheel - Internal grinding unit - Center height adjustment - Dressing spindle for diamond dressing roll - Balancing and finishing sensor - Hydraulic clamping/releasing of the tailstock - Automatic Siemens door drive - 19" / 22" screen - Remote maintenance - Conversion to needle nozzles - Matching coolant/extraction system - Automation preparation - and much more Ledpfxjfg S Uas Ammoac We would also be happy to overhaul your existing machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and others.

Condition: refurbished (used), Year of construction: 2025, Schaudt PF5 UB 1000-2500 mm Grinding length: 1,000 / 1,500 / 2,000 / 2,500 mm Center height: 180 / 225 mm (more possible as an option) Workpiece weight: 350 / 500 / 800 kg (more possible as an option) Ljdpfx Ajfg Tazemmoac Further options that can be freely selected: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control - Quick setup via GSN operator interface - Diatronic measuring system - B-axis freely positionable - Second external grinding wheel - Internal grinding unit - Center height adjustment - Dressing spindle for diamond form roller - Balancing and finish grinding sensor - Hydraulic clamping/releasing of the tailstock - Automatic Siemens door drive - 19" / 22" screen - Remote maintenance - Conversion to needle nozzles - Suitable coolant/extraction system - Automation preparation - and much more We would also be happy to overhaul your existing grinding machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and others.

Condition: refurbished (used), Year of construction: 2025, Schaudt PS51 S600 - Premium Refurbished - Grinding length: 600 mm Laedsfg Utdepfx Ammjc - Center height: 180 mm - Grinding wheel width: 220 mm (More possible as an option) - Workpiece weight: 200 kg Additional options that can be freely selected: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus - Quick setup via GSN operator interface - In-process measuring control DMK / LMK - Grinding spindle for diamond form wheel - Balancing and truing sensor system - Hydraulic clamping/releasing of the tailstock - Automatic Siemens door drive - Remote maintenance - Conversion to needle nozzles - Matching coolant / extraction system - Automation preparation - and more We would be happy to refurbish your existing machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and more.

Condition: refurbished (used), Year of construction: 2025, Schaudt ZX11 Grinding length: 600 mm Center height: 180 (Optionally more possible) Workpiece weight: 80 kg Further optional features: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control system - Quick setup via GSN operator interface - Dressing spindle for diamond form rollers - Balancing and finishing sensor - Hydraulic clamping/releasing of the tailstock - Automatic Siemens door drive - 19" / 22" screen - Remote maintenance - Conversion to needle nozzles - Matching coolant/extraction system - Automation preparation - and much more Ledpfx Aed Hfqrsmmjac We would also be happy to overhaul your existing grinding machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and others

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 09020018, input voltage: 230 V, pneumatic connection: 5.5 bar, Description: For sale is a VIBEMAC 3022 WB 406-1CS industrial waistband sewing machine, offered as a complete workstation. This Italian-built unit is specifically designed for high-precision waistband attachment and reinforced seam operations in denim, trousers, and workwear production. The machine produces strong and consistent chainstitch seams and is widely used in professional garment manufacturing environments. The unit has been in production use and was fully operational until factory shutdown. The machine has been video recorded in full working condition on 01.04.2026. VIBEMAC machines are known for their durability, precision, and long operational lifespan, making them a preferred choice in denim production. Key features: • Automatic waistband sewing system • Chainstitch seam for strong and flexible stitching • Suitable for heavy fabrics (denim, workwear) • Consistent seam quality and high repeatability • Designed for continuous industrial use • Integrated feeding system for stable material handling Includes: • VIBEMAC 3022 WB 406-1CS sewing machine head • Integrated motor and drive system • Industrial worktable and steel stand Lajdey Ipnaspfx Ammjc • Foot pedal control • Thread stand and guides • Integrated control panel Technical details: • Manufacturer: VIBEMAC S.p.A., Italy • Model: 3022 WB 406-1CS • Year: 2009 • Stitch type: Chainstitch • Needle system: 62x57 F120 • Power: 220 / 380V Condition: • Used industrial condition • Fully operational prior to factory shutdown • Video recorded in operation (01.04.2026) • Recently serviced (27.02.2026) • Typical signs of use from production environment • Sold as-is, where-is, without warranty Typical applications: • Waistband attachment (jeans, trousers) • Reinforced seams • Heavy-duty garment production Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Features and technical data: Right-hand version 2 auxiliary tables are still in original packaging H&H / HARDO TH 1020-V46 BV DA (twin system) Maximum application width: 2,040 mm (2 × 1,020 mm) Design: Twin system, both machines can also be operated individually Application roller: reinforced version Application roller diameter: 46 mm Application roller knurling: 0.5 mm Bearings: reinforced roller bearings Bearing shells: hardened Scraper: pneumatically actuated, needle bearings Main bearing lubrication: routed externally, to be filled with a manual grease gun Container seal: adjustable and replaceable without removing the application unit Application speed control: via frequency converter Speed range: 3.2 – 19.3 m/min Control: potentiometer Display: digital speed display Pressure rollers: 2 pieces, silicone-coated Pressure roller length: 2,040 mm Pressure roller diameter: 159 mm Pressure roller actuation: pneumatic Laedpfx Amoy E Avljmjc Automatic lowering of pressure rollers when drive motor is switched off Height adjustment for material clearance: electromechanically, manual inching mode Applicator unit stroke: 0 – 200 mm Conveying height: 925 mm (underside of material) Pressure roller drive: separate drive Motor: including motor mounting, fastening, and enclosure Additional application speed control: via separate frequency converter Additional speed range: 3.2 – 19.3 m/min Additional control: potentiometer Additional display: digital speed display Base frame: aluminium profile system Stands: 2 pieces, anodised aluminium plates Adjustable feet: adjustment range ±25 mm Material feed direction: right to left Heating control: programmable timer (daily and weekly program) Temperature control: electronic with digital actual value display Melt tank capacity: 2 × 25 litres Heating power: 2 × 8.0 kW Nominal power: 18.5 kW Control voltage: 24 V Nominal frequency: 50 Hz Operating voltage: 400 V Phases: 3 Fuse: 63 A Compressed air connection: < 8 bar Application: Melting and applying non-reactive hot-melt adhesives Weight: 1,560 kg Availability: short-term Location: Rhineland-Palatinate

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Dorit PSM 52 Year of manufacture: 2017 The machine is in very good condition and ready for immediate use. Lajdpey Uwwcefx Ammjc Weight [kg]: 550 Throat [mm]: 210 Belt length [mm]: 1200 Needle size, outer diameter [mm]: 4.0 Needle hole [mm]: 0.6 to 2.5 Connection value [kW]: 2.2 Number of needle rows: 4 Stroke rate [strokes/min]: 10-60 strokes

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For sale: a brining injector from Günther Type: PI 26 M including filter system GRF 200 K Year of manufacture: 2015 Capacity: approx. 500 – 800 kg/h Stroke rate [strokes/min]: 10-60 strokes Passage diameter: 210 mm Laedsy Uwr Tspfx Ammec Belt length: 1100 mm Equipped with 26 needles, needle thickness (standard) approx. 4.0 mm The injection volume can be continuously adjusted from 2 to 25% The machine is in very good condition and ready for immediate use.